# We have to override the new %%install behavior because, well... the kernel is special. %global __spec_install_pre %{___build_pre} # At the time of this writing (2019-03), RHEL8 packages use w2.xzdio # compression for rpms (xz, level 2). # Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins # to compress by single-threaded xz. Switch to threaded compression, # and from level 2 to 3 to keep compressed sizes close to "w2" results. # # NB: if default compression in /usr/lib/rpm/redhat/macros ever changes, # this one might need tweaking (e.g. if default changes to w3.xzdio, # change below to w4T.xzdio): # # This is disabled on i686 as it triggers oom errors %ifnarch i686 %define _binary_payload w3T.xzdio %endif Summary: The Linux kernel # For a kernel released for public testing, released_kernel should be 1. # For internal testing builds during development, it should be 0. # For rawhide and/or a kernel built from an rc or git snapshot, # released_kernel should be 0. # For a stable, released kernel, released_kernel should be 1. %global released_kernel 1 %if 0%{?fedora} %define secure_boot_arch x86_64 %else %define secure_boot_arch x86_64 aarch64 %endif # Signing for secure boot authentication %ifarch %{secure_boot_arch} %global signkernel 1 %else %global signkernel 0 %endif # Sign modules on all arches %global signmodules 1 # Compress modules only for architectures that build modules %ifarch noarch %global zipmodules 0 %else %global zipmodules 1 %endif %if %{zipmodules} %global zipsed -e 's/\.ko$/\.ko.xz/' %endif # define buildid .local %if 0%{?fedora}%{?centos} %define primary_target fedora %else %define primary_target rhel %endif # baserelease defines which build revision of this kernel version we're # building. We used to call this fedora_build, but the magical name # baserelease is matched by the rpmdev-bumpspec tool, which you should use. # # We used to have some extra magic weirdness to bump this automatically, # but now we don't. Just use: rpmdev-bumpspec -c 'comment for changelog' # When changing base_sublevel below or going from rc to a final kernel, # reset this by hand to 1 (or to 0 and then use rpmdev-bumpspec). # scripts/rebase.sh should be made to do that for you, actually. # # NOTE: baserelease must be > 0 or bad things will happen if you switch # to a released kernel (released version will be < rc version) # # For non-released -rc kernels, this will be appended after the rcX and # gitX tags, so a 3 here would become part of release "0.rcX.gitX.3" # %global baserelease 200 %global fedora_build %{baserelease} # base_sublevel is the kernel version we're starting with and patching # on top of -- for example, 3.1-rc7-git1 starts with a 3.0 base, # which yields a base_sublevel of 0. %define base_sublevel 4 ## If this is a released kernel ## %if 0%{?released_kernel} # Do we have a -stable update to apply? %define stable_update 84 # Set rpm version accordingly %if 0%{?stable_update} %define stablerev %{stable_update} %define stable_base %{stable_update} %endif %define rpmversion 5.%{base_sublevel}.%{stable_update} ## The not-released-kernel case ## %else # The next upstream release sublevel (base_sublevel+1) %define upstream_sublevel %(echo $((%{base_sublevel} + 1))) # The rc snapshot level %global rcrev 0 # The git snapshot level %define gitrev 0 # Set rpm version accordingly %define rpmversion 5.%{upstream_sublevel}.0 %endif # Nb: The above rcrev and gitrev values automagically define Patch00 and Patch01 below. # What parts do we want to build? We must build at least one kernel. # These are the kernels that are built IF the architecture allows it. # All should default to 1 (enabled) and be flipped to 0 (disabled) # by later arch-specific checks. # The following build options are enabled by default. # Use either --without in your rpmbuild command or force values # to 0 in here to disable them. # # standard kernel %define with_up %{?_without_up: 0} %{?!_without_up: 1} # kernel PAE (only valid for ARM (lpae)) %define with_pae %{?_without_pae: 0} %{?!_without_pae: 1} # kernel-debug %define with_debug %{?_without_debug: 0} %{?!_without_debug: 1} # kernel-doc %define with_doc %{?_without_doc: 0} %{?!_without_doc: 1} # kernel-headers %define with_headers %{?_without_headers: 0} %{?!_without_headers: 1} %define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1} # perf %define with_perf %{?_without_perf: 0} %{?!_without_perf: 1} # tools %define with_tools %{?_without_tools: 0} %{?!_without_tools: 1} # bpf tool %define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1} # kernel-debuginfo %define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1} # Want to build a the vsdo directories installed %define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1} # kernel-zfcpdump (s390 specific kernel for zfcpdump) %define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1} # kernel-abi-whitelists %define with_kernel_abi_whitelists %{?_without_kernel_abi_whitelists: 0} %{?!_without_kernel_abi_whitelists: 1} # internal samples and selftests %define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1} # # Additional options for user-friendly one-off kernel building: # # Only build the base kernel (--with baseonly): %define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0} # Only build the pae kernel (--with paeonly): %define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0} # Only build the debug kernel (--with dbgonly): %define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0} # Control whether we perform a compat. check against published ABI. %define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1} # Temporarily disable kabi checks until RC. %define with_kabichk 0 # Control whether we perform a compat. check against DUP ABI. %define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0} # # Control whether to run an extensive DWARF based kABI check. # Note that this option needs to have baseline setup in SOURCE300. %define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1} %define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0} # # should we do C=1 builds with sparse %define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0} # # Cross compile requested? %define with_cross %{?_with_cross: 1} %{?!_with_cross: 0} # # build a release kernel on rawhide %define with_release %{?_with_release: 1} %{?!_with_release: 0} # verbose build, i.e. no silent rules and V=1 %define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0} # # check for mismatched config options %define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1} # # gcov support %define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0} # # ipa_clone support %define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1} # Want to build a vanilla kernel build without any non-upstream patches? %define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0} # Set debugbuildsenabled to 1 for production (build separate debug kernels) # and 0 for rawhide (all kernels are debug kernels). # See also 'make debug' and 'make release'. %define debugbuildsenabled 1 %if 0%{?fedora} # Kernel headers are being split out into a separate package %define with_headers 0 %define with_cross_headers 0 # no selftests for now %define with_selftests 0 # no ipa_clone for now %define with_ipaclones 0 # no whitelist %define with_kernel_abi_whitelists 0 # Fedora builds these separately %define with_perf 0 %define with_tools 0 %define with_bpftool 0 %endif %if 0%{?centos} # no selftests for now %define with_selftests 0 # no ipa_clone for now %define with_ipaclones 0 # no whitelist %define with_kernel_abi_whitelists 0 %define with_kabidw_base 0 %define with_kabidwchk 0 %endif %if %{with_verbose} %define make_opts V=1 %else %define make_opts -s %endif # pkg_release is what we'll fill in for the rpm Release: field %if 0%{?released_kernel} %define pkg_release %{fedora_build}%{?buildid}%{?dist} %else # non-released_kernel %if 0%{?rcrev} %define rctag .rc%rcrev %else %define rctag .rc0 %endif %if 0%{?gitrev} %define gittag .git%gitrev %else %define gittag .git0 %endif %define pkg_release 0%{?rctag}%{?gittag}.%{fedora_build}%{?buildid}%{?dist} %endif # The kernel tarball/base version %define kversion 5.%{base_sublevel} # turn off debug kernel and kabichk for gcov builds %if %{with_gcov} %define with_debug 0 %define with_kabichk 0 %define with_kabidupchk 0 %define with_kabidwchk 0 %endif # turn off kABI DWARF-based check if we're generating the base dataset %if %{with_kabidw_base} %define with_kabidwchk 0 %endif # kpatch_kcflags are extra compiler flags applied to base kernel # -fdump-ipa-clones is enabled only for base kernels on selected arches %if %{with_ipaclones} %ifarch x86_64 ppc64le %define kpatch_kcflags -fdump-ipa-clones %else %define with_ipaclones 0 %endif %endif %define make_target bzImage %define image_install_path boot %define KVERREL %{version}-%{release}.%{_target_cpu} %define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g') %define hdrarch %_target_cpu %define asmarch %_target_cpu %if 0%{!?nopatches:1} %define nopatches 0 %endif %if %{with_vanilla} %define nopatches 1 %endif %if %{nopatches} %define variant -vanilla %endif %if !%{debugbuildsenabled} %define with_debug 0 %endif %if !%{with_debuginfo} %define _enable_debug_packages 0 %endif %define debuginfodir /usr/lib/debug # Needed because we override almost everything involving build-ids # and debuginfo generation. Currently we rely on the old alldebug setting. %global _build_id_links alldebug # kernel PAE is only built on ARMv7 %ifnarch armv7hl %define with_pae 0 %endif # if requested, only build base kernel %if %{with_baseonly} %define with_pae 0 %define with_debug 0 %endif # if requested, only build pae kernel %if %{with_paeonly} %define with_up 0 %define with_debug 0 %endif # if requested, only build debug kernel %if %{with_dbgonly} %if %{debugbuildsenabled} %define with_up 0 %define with_pae 0 %endif %define with_pae 0 %define with_tools 0 %define with_perf 0 %define with_bpftool 0 %endif # turn off kABI DUP check and DWARF-based check if kABI check is disabled %if !%{with_kabichk} %define with_kabidupchk 0 %define with_kabidwchk 0 %endif %if %{with_vdso_install} %define use_vdso 1 %endif %ifnarch noarch %define with_kernel_abi_whitelists 0 %endif # Overrides for generic default options # only package docs noarch %ifnarch noarch %define with_doc 0 %define doc_build_fail true %endif %if 0%{?fedora}%{?centos} # don't do debug builds on anything but i686 and x86_64 %ifnarch i686 x86_64 %define with_debug 0 %endif %endif # don't build noarch kernels or headers (duh) %ifarch noarch %define with_up 0 %define with_headers 0 %define with_cross_headers 0 %define with_tools 0 %define with_perf 0 %define with_bpftool 0 %define with_selftests 0 %define with_debug 0 %define all_arch_configs kernel-%{version}-*.config %endif # sparse blows up on ppc %ifnarch ppc64le %define with_sparse 0 %endif # zfcpdump mechanism is s390 only %ifnarch s390x %define with_zfcpdump 0 %endif %if 0%{?fedora} # This is not for Fedora %define with_zfcpdump 0 %endif # Per-arch tweaks %ifarch i686 %define asmarch x86 %define hdrarch i386 %define all_arch_configs kernel-%{version}-i?86*.config %define kernel_image arch/x86/boot/bzImage %endif %ifarch x86_64 %define asmarch x86 %define all_arch_configs kernel-%{version}-x86_64*.config %define kernel_image arch/x86/boot/bzImage %endif %ifarch ppc64le %define asmarch powerpc %define hdrarch powerpc %define make_target vmlinux %define kernel_image vmlinux %define kernel_image_elf 1 %define all_arch_configs kernel-%{version}-ppc64le*.config %define kcflags -O3 %endif %ifarch s390x %define asmarch s390 %define hdrarch s390 %define all_arch_configs kernel-%{version}-s390x.config %define kernel_image arch/s390/boot/bzImage %endif %ifarch %{arm} %define all_arch_configs kernel-%{version}-arm*.config %define skip_nonpae_vdso 1 %define asmarch arm %define hdrarch arm %define make_target bzImage %define kernel_image arch/arm/boot/zImage # http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html %define kernel_mflags KALLSYMS_EXTRA_PASS=1 # we only build headers/perf/tools on the base arm arches # just like we used to only build them on i386 for x86 %ifnarch armv7hl %define with_headers 0 %define with_cross_headers 0 %endif # These currently don't compile on armv7 %define with_selftests 0 %endif %ifarch aarch64 %define all_arch_configs kernel-%{version}-aarch64*.config %define asmarch arm64 %define hdrarch arm64 %define make_target Image.gz %define kernel_image arch/arm64/boot/Image.gz %endif # Should make listnewconfig fail if there's config options # printed out? %if %{nopatches} %define with_configchecks 0 %endif # To temporarily exclude an architecture from being built, add it to # %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we # don't build kernel-headers then the new build system will no longer let # us use the previous build of that package -- it'll just be completely AWOL. # Which is a BadThing(tm). # We only build kernel-headers on the following... %if 0%{?fedora}%{?centos} %define nobuildarches i386 %else %define nobuildarches i386 i686 %endif %ifarch %nobuildarches %define with_up 0 %define with_debug 0 %define with_debuginfo 0 %define with_perf 0 %define with_tools 0 %define with_bpftool 0 %define with_selftests 0 %define with_pae 0 %define _enable_debug_packages 0 %endif # Architectures we build tools/cpupower on %if 0%{?fedora}%{?centos} %define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64 %else %define cpupowerarchs i686 x86_64 ppc64le aarch64 %endif %if %{use_vdso} %if 0%{?skip_nonpae_vdso} %define _use_vdso 0 %else %define _use_vdso 1 %endif %else %define _use_vdso 0 %endif # # Packages that need to be installed before the kernel is, because the %%post # scripts use them. # %define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install %define initrd_prereq dracut >= 027 Name: kernel%{?variant} License: GPLv2 and Redistributable, no modification permitted URL: https://www.kernel.org/ Version: %{rpmversion} Release: %{pkg_release} # DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD. # SET %%nobuildarches (ABOVE) INSTEAD %if 0%{?fedora} ExclusiveArch: x86_64 s390x %{arm} aarch64 ppc64le %else ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le %endif ExclusiveOS: Linux %ifnarch %{nobuildarches} Requires: kernel-core-uname-r = %{KVERREL}%{?variant} Requires: kernel-modules-uname-r = %{KVERREL}%{?variant} %endif # # List the packages used during the kernel build # BuildRequires: kmod, patch, bash, tar, git-core BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex BuildRequires: net-tools, hostname, bc, elfutils-devel %if 0%{?rhel} == 7 BuildRequires: devtoolset-8-build BuildRequires: devtoolset-8-binutils BuildRequires: devtoolset-8-gcc BuildRequires: devtoolset-8-make BuildRequires: python3-rpm-macros %endif %if 0%{?fedora} BuildRequires: dwarves %endif # Used to mangle unversioned shebangs to be Python 3 BuildRequires: python3-devel %if %{with_headers} BuildRequires: rsync %endif %if %{with_doc} BuildRequires: xmlto, asciidoc, python3-sphinx %endif %if %{with_sparse} BuildRequires: sparse %endif %if %{with_perf} BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel BuildRequires: audit-libs-devel BuildRequires: java-devel %ifnarch %{arm} s390x BuildRequires: numactl-devel %endif %endif %if %{with_tools} BuildRequires: gettext ncurses-devel %ifnarch s390x BuildRequires: pciutils-devel %endif %endif %if %{with_bpftool} %if 0%{?rhel} == 7 BuildRequires: python-docutils %else BuildRequires: python3-docutils %endif BuildRequires: zlib-devel binutils-devel %endif %if %{with_selftests} %if 0%{?fedora} BuildRequires: clang llvm %else %if 0%{?rhel} == 7 BuildRequires: llvm-toolset-7.0 %else BuildRequires: llvm-toolset %endif %endif %ifnarch %{arm} BuildRequires: numactl-devel %endif BuildRequires: libcap-devel libcap-ng-devel rsync %endif BuildConflicts: rhbuildsys(DiskFree) < 500Mb %if %{with_debuginfo} BuildRequires: rpm-build, elfutils BuildConflicts: rpm < 4.13.0.1-19 %if 0%{?fedora} BuildConflicts: dwarves < 1.13 %endif # Most of these should be enabled after more investigation %undefine _include_minidebuginfo %undefine _find_debuginfo_dwz_opts %undefine _unique_build_ids %undefine _unique_debug_names %undefine _unique_debug_srcs %undefine _debugsource_packages %undefine _debuginfo_subpackages %global _find_debuginfo_opts -r %global _missing_build_ids_terminate_build 1 %global _no_recompute_build_ids 1 %endif %if %{with_kabidwchk} || %{with_kabidw_base} BuildRequires: kabi-dw %endif %if %{signkernel}%{signmodules} BuildRequires: openssl openssl-devel %if %{signkernel} %ifarch x86_64 aarch64 BuildRequires: nss-tools BuildRequires: pesign >= 0.10-4 %endif %endif %endif %if %{with_cross} BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu %define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu- %endif # These below are required to build man pages %if %{with_perf} BuildRequires: xmlto %endif %if %{with_perf} || %{with_tools} BuildRequires: asciidoc %endif %if %{with_tools} BuildRequires: libcap-devel %endif Source0: https://www.kernel.org/pub/linux/kernel/v5.x/linux-%{kversion}.tar.xz # Name of the packaged file containing signing key %ifarch ppc64le %define signing_key_filename kernel-signing-ppc.cer %endif %ifarch s390x %define signing_key_filename kernel-signing-s390.cer %endif Source10: x509.genkey.rhel Source11: x509.genkey.fedora %if %{?released_kernel} Source12: centossecurebootca2.der Source13: centos-ca-secureboot.der Source14: centossecureboot201.der Source15: centossecureboot001.der Source16: secureboot_s390.cer Source17: secureboot_ppc.cer %define secureboot_ca_1 %{SOURCE12} %define secureboot_ca_0 %{SOURCE13} %ifarch x86_64 aarch64 %define secureboot_key_1 %{SOURCE14} %define pesign_name_1 centossecureboot201 %define secureboot_key_0 %{SOURCE15} %define pesign_name_0 centossecureboot001 %endif # released_kernel %else Source12: centossecurebootca2.der Source13: centos-ca-secureboot.der Source14: centossecureboot201.der Source15: centossecureboot001.der %define secureboot_ca_1 %{SOURCE12} %define secureboot_ca_0 %{SOURCE13} %define secureboot_key_1 %{SOURCE14} %define pesign_name_1 centossecureboot201 %define secureboot_key_0 %{SOURCE15} %define pesign_name_0 centossecureboot001 # released_kernel %endif Source22: mod-extra.list.rhel Source23: mod-extra.list.fedora Source24: mod-extra.sh Source18: mod-sign.sh Source19: mod-extra-blacklist.sh Source79: parallel_xz.sh Source80: filter-x86_64.sh.fedora Source81: filter-armv7hl.sh.fedora Source82: filter-i686.sh.fedora Source83: filter-aarch64.sh.fedora Source86: filter-ppc64le.sh.fedora Source87: filter-s390x.sh.fedora Source89: filter-modules.sh.fedora Source90: filter-x86_64.sh.rhel Source91: filter-armv7hl.sh.rhel Source92: filter-i686.sh.rhel Source93: filter-aarch64.sh.rhel Source96: filter-ppc64le.sh.rhel Source97: filter-s390x.sh.rhel Source99: filter-modules.sh.rhel %define modsign_cmd %{SOURCE18} Source20: kernel-aarch64-rhel.config Source21: kernel-aarch64-debug-rhel.config Source30: kernel-ppc64le-rhel.config Source31: kernel-ppc64le-debug-rhel.config Source32: kernel-s390x-rhel.config Source33: kernel-s390x-debug-rhel.config Source34: kernel-s390x-zfcpdump-rhel.config Source35: kernel-x86_64-rhel.config Source36: kernel-x86_64-debug-rhel.config Source37: kernel-aarch64-fedora.config Source38: kernel-aarch64-debug-fedora.config Source39: kernel-armv7hl-fedora.config Source40: kernel-armv7hl-debug-fedora.config Source41: kernel-armv7hl-lpae-fedora.config Source42: kernel-armv7hl-lpae-debug-fedora.config Source43: kernel-i686-fedora.config Source44: kernel-i686-debug-fedora.config Source45: kernel-ppc64le-fedora.config Source46: kernel-ppc64le-debug-fedora.config Source47: kernel-s390x-fedora.config Source48: kernel-s390x-debug-fedora.config Source49: kernel-x86_64-fedora.config Source50: kernel-x86_64-debug-fedora.config Source51: generate_all_configs.sh Source52: process_configs.sh Source53: generate_bls_conf.sh Source56: update_scripts.sh Source54: mod-internal.list Source55: merge.pl Source200: check-kabi Source201: Module.kabi_aarch64 Source202: Module.kabi_ppc64le Source203: Module.kabi_s390x Source204: Module.kabi_x86_64 Source210: Module.kabi_dup_aarch64 Source211: Module.kabi_dup_ppc64le Source212: Module.kabi_dup_s390x Source213: Module.kabi_dup_x86_64 # Source300: kernel-abi-whitelists-%{rpmversion}-%{distro_build}.tar.bz2 # Source301: kernel-kabi-dw-%{rpmversion}-%{distro_build}.tar.bz2 # Sources for kernel-tools Source2000: cpupower.service Source2001: cpupower.config Source9000: centos.pem ## Patches needed for building this package # Patch1: patch-%{rpmversion}-redhat.patch # empty final patch to facilitate testing of kernel patches # Patch999999: linux-kernel-test.patch # This file is intentionally left empty in the stock kernel. Its a nicety # added for those wanting to do custom rebuilds with altered config opts. Source1000: kernel-local # Here should be only the patches up to the upstream canonical Linus tree. # For a stable release kernel %if 0%{?stable_update} %if 0%{?stable_base} %define stable_patch_00 patch-5.%{base_sublevel}.%{stable_base}.xz Source5000: %{stable_patch_00} %endif # non-released_kernel case # These are automagically defined by the rcrev and gitrev values set up # near the top of this spec file. %else %if 0%{?rcrev} Source5000: patch-5.%{upstream_sublevel}-rc%{rcrev}.xz %if 0%{?gitrev} Source5001: patch-5.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.xz %endif %else # pre-{base_sublevel+1}-rc1 case %if 0%{?gitrev} Source5000: patch-5.%{base_sublevel}-git%{gitrev}.xz %endif %endif %endif ## Patches needed for building this package ## compile fixes %if !%{nopatches} # Git trees. # Standalone patches # 100 - Generic long running patches # 200 - x86 / secureboot # bz 1497559 - Make kernel MODSIGN code not error on missing variables Patch201: 0002-Add-efi_status_to_str-and-rework-efi_status_to_err.patch Patch202: 0003-Make-get_cert_list-use-efi_status_to_str-to-print-er.patch Patch204: efi-secureboot.patch # 300 - ARM patches Patch300: arm64-Add-option-of-13-for-FORCE_MAX_ZONEORDER.patch # RHBZ Bug 1576593 - work around while vendor investigates Patch301: arm-make-highpte-not-expert.patch # https://patchwork.kernel.org/patch/10351797/ Patch302: ACPI-scan-Fix-regression-related-to-X-Gene-UARTs.patch # rhbz 1574718 Patch303: ACPI-irq-Workaround-firmware-issue-on-X-Gene-based-m400.patch # http://www.spinics.net/lists/linux-tegra/msg26029.html Patch304: usb-phy-tegra-Add-38.4MHz-clock-table-entry.patch # http://patchwork.ozlabs.org/patch/587554/ Patch305: ARM-tegra-usb-no-reset.patch # Tegra bits Patch320: arm64-tegra-jetson-tx1-fixes.patch # https://www.spinics.net/lists/linux-tegra/msg43110.html Patch321: arm64-tegra-Jetson-TX2-Allow-bootloader-to-configure.patch # https://patchwork.kernel.org/patch/11171225/ Patch322: mfd-max77620-Do-not-allocate-IRQs-upfront.patch # https://patchwork.ozlabs.org/patch/1170631/ Patch323: gpio-max77620-Use-correct-unit-for-debounce-times.patch # https://www.spinics.net/lists/linux-tegra/msg44216.html Patch324: arm64-tegra186-enable-USB-on-Jetson-TX2.patch # https://patchwork.kernel.org/patch/11224177/ Patch325: arm64-usb-host-xhci-tegra-set-MODULE_FIRMWARE-for-tegra186.patch # 400 - IBM (ppc/s390x) patches # 500 - Temp fixes/CVEs etc # rhbz 1431375 Patch501: input-rmi4-remove-the-need-for-artifical-IRQ.patch # gcc9 fixes Patch502: 0001-Drop-that-for-now.patch # https://bugzilla.redhat.com/show_bug.cgi?id=1701096 # Submitted upstream at https://lkml.org/lkml/2019/4/23/89 Patch503: KEYS-Make-use-of-platform-keyring-for-module-signature.patch # it seems CONFIG_OPTIMIZE_INLINING has been forced now and is causing issues on ARMv7 # https://lore.kernel.org/patchwork/patch/1132459/ # https://lkml.org/lkml/2019/8/29/1772 Patch504: ARM-fix-__get_user_check-in-case-uaccess_-calls-are-not-inlined.patch #KVM fix Patch700: 0001-arm64-kvm-Fix-IDMAP-overlap-with-HYP-VA.patch #Wireguard Patch800: wireguard.patch #CentOS Patch9999: 0001-Fix-mt7615.patch # END OF PATCH DEFINITIONS %endif %description The kernel meta package # # This macro does requires, provides, conflicts, obsoletes for a kernel package. # %%kernel_reqprovconf # It uses any kernel__conflicts and kernel__obsoletes # macros defined above. # %define kernel_reqprovconf \ Provides: kernel = %{rpmversion}-%{pkg_release}\ Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:+%{1}}\ Provides: kernel-drm-nouveau = 16\ Provides: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires(pre): %{kernel_prereq}\ Requires(pre): %{initrd_prereq}\ Requires(pre): linux-firmware >= 20150904-56.git6ebf5d57\ Requires(preun): systemd >= 200\ Conflicts: xfsprogs < 4.3.0-1\ Conflicts: xorg-x11-drv-vmmouse < 13.0.99\ %{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\ %{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\ %{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\ # We can't let RPM do the dependencies automatic because it'll then pick up\ # a correct but undesirable perl dependency from the module headers which\ # isn't required for the kernel proper to function\ AutoReq: no\ AutoProv: yes\ %{nil} %package doc Summary: Various documentation bits found in the kernel source Group: Documentation %description doc This package contains documentation files from the kernel source. Various bits of information about the Linux kernel and the device drivers shipped with it are documented in these files. You'll want to install this package if you need a reference to the options that can be passed to Linux kernel modules at load time. %package headers Summary: Header files for the Linux kernel for use by glibc Obsoletes: glibc-kernheaders < 3.0-46 Provides: glibc-kernheaders = 3.0-46 %if "0%{?variant}" Obsoletes: kernel-headers < %{rpmversion}-%{pkg_release} Provides: kernel-headers = %{rpmversion}-%{pkg_release} %endif %description headers Kernel-headers includes the C header files that specify the interface between the Linux kernel and userspace libraries and programs. The header files define structures and constants that are needed for building most standard programs and are also needed for rebuilding the glibc package. %package cross-headers Summary: Header files for the Linux kernel for use by cross-glibc %description cross-headers Kernel-cross-headers includes the C header files that specify the interface between the Linux kernel and userspace libraries and programs. The header files define structures and constants that are needed for building most standard programs and are also needed for rebuilding the cross-glibc package. %package debuginfo-common-%{_target_cpu} Summary: Kernel source files used by %{name}-debuginfo packages Provides: installonlypkg(kernel) %description debuginfo-common-%{_target_cpu} This package is required by %{name}-debuginfo subpackages. It provides the kernel source files common to all builds. %if %{with_perf} %package -n perf Summary: Performance monitoring for the Linux kernel License: GPLv2 %description -n perf This package contains the perf tool, which enables performance monitoring of the Linux kernel. %package -n perf-debuginfo Summary: Debug information for package perf Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release} AutoReqProv: no %description -n perf-debuginfo This package provides debug information for the perf package. # Note that this pattern only works right to match the .build-id # symlinks because of the trailing nonmatching alternation and # the leading .*, because of find-debuginfo.sh's buggy handling # of matching the pattern against the symlinks file. %{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/traceevent/plugins/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list} %package -n python3-perf Summary: Python bindings for apps which will manipulate perf events %description -n python3-perf The python3-perf package contains a module that permits applications written in the Python programming language to use the interface to manipulate perf events. %package -n python3-perf-debuginfo Summary: Debug information for package perf python bindings Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release} AutoReqProv: no %description -n python3-perf-debuginfo This package provides debug information for the perf python bindings. # the python_sitearch macro should already be defined from above %{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list} # with_perf %endif %if %{with_tools} %package -n kernel-tools Summary: Assortment of tools for the Linux kernel License: GPLv2 %ifarch %{cpupowerarchs} Provides: cpupowerutils = 1:009-0.6.p1 Obsoletes: cpupowerutils < 1:009-0.6.p1 Provides: cpufreq-utils = 1:009-0.6.p1 Provides: cpufrequtils = 1:009-0.6.p1 Obsoletes: cpufreq-utils < 1:009-0.6.p1 Obsoletes: cpufrequtils < 1:009-0.6.p1 Obsoletes: cpuspeed < 1:1.5-16 Requires: kernel-tools-libs = %{version}-%{release} %endif %define __requires_exclude ^%{_bindir}/python %description -n kernel-tools This package contains the tools/ directory from the kernel source and the supporting documentation. %package -n kernel-tools-libs Summary: Libraries for the kernels-tools License: GPLv2 %description -n kernel-tools-libs This package contains the libraries built from the tools/ directory from the kernel source. %package -n kernel-tools-libs-devel Summary: Assortment of tools for the Linux kernel License: GPLv2 Requires: kernel-tools = %{version}-%{release} %ifarch %{cpupowerarchs} Provides: cpupowerutils-devel = 1:009-0.6.p1 Obsoletes: cpupowerutils-devel < 1:009-0.6.p1 %endif Requires: kernel-tools-libs = %{version}-%{release} Provides: kernel-tools-devel %description -n kernel-tools-libs-devel This package contains the development files for the tools/ directory from the kernel source. %package -n kernel-tools-debuginfo Summary: Debug information for package kernel-tools Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release} AutoReqProv: no %description -n kernel-tools-debuginfo This package provides debug information for package kernel-tools. # Note that this pattern only works right to match the .build-id # symlinks because of the trailing nonmatching alternation and # the leading .*, because of find-debuginfo.sh's buggy handling # of matching the pattern against the symlinks file. %{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|XXX' -o kernel-tools-debuginfo.list} # with_tools %endif %if %{with_bpftool} %package -n bpftool Summary: Inspection and simple manipulation of eBPF programs and maps License: GPLv2 %description -n bpftool This package contains the bpftool, which allows inspection and simple manipulation of eBPF programs and maps. %package -n bpftool-debuginfo Summary: Debug information for package bpftool Group: Development/Debug Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release} AutoReqProv: no %description -n bpftool-debuginfo This package provides debug information for the bpftool package. %{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list} # with_bpftool %endif %if %{with_selftests} %package selftests-internal Summary: Kernel samples and selftests License: GPLv2 Requires: binutils, bpftool, iproute-tc, nmap-ncat Requires: kernel-modules-internal = %{version}-%{release} %description selftests-internal Kernel sample programs and selftests. # Note that this pattern only works right to match the .build-id # symlinks because of the trailing nonmatching alternation and # the leading .*, because of find-debuginfo.sh's buggy handling # of matching the pattern against the symlinks file. %{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list} # with_selftests %endif %if %{with_gcov} %package gcov Summary: gcov graph and source files for coverage data collection. %description gcov kernel-gcov includes the gcov graph and source files for gcov coverage collection. %endif %package -n kernel-abi-whitelists Summary: The Red Hat Enterprise Linux kernel ABI symbol whitelists AutoReqProv: no %description -n kernel-abi-whitelists The kABI package contains information pertaining to the Red Hat Enterprise Linux kernel ABI, including lists of kernel symbols that are needed by external Linux kernel modules, and a yum plugin to aid enforcement. %if %{with_kabidw_base} %package kabidw-base Summary: The baseline dataset for kABI verification using DWARF data Group: System Environment/Kernel AutoReqProv: no %description kabidw-base The kabidw-base package contains data describing the current ABI of the Red Hat Enterprise Linux kernel, suitable for the kabi-dw tool. %endif # # This macro creates a kernel--debuginfo package. # %%kernel_debuginfo_package # # Explanation of the find_debuginfo_opts: We build multiple kernels (debug # pae etc.) so the regex filters those kernels appropriately. We also # have to package several binaries as part of kernel-devel but getting # unique build-ids is tricky for these userspace binaries. We don't really # care about debugging those so we just filter those out and remove it. %define kernel_debuginfo_package() \ %package %{?1:%{1}-}debuginfo\ Summary: Debug information for package %{name}%{?1:-%{1}}\ Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\ Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\ Provides: installonlypkg(kernel)\ AutoReqProv: no\ %description %{?1:%{1}-}debuginfo\ This package provides debug information for package %{name}%{?1:-%{1}}.\ This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\ %{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\ %{nil} # # This macro creates a kernel--devel package. # %%kernel_devel_package # %define kernel_devel_package() \ %package %{?1:%{1}-}devel\ Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\ Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\ Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-devel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Provides: installonlypkg(kernel)\ AutoReqProv: no\ Requires(pre): findutils\ Requires: findutils\ Requires: perl-interpreter\ %description %{?1:%{1}-}devel\ This package provides kernel headers and makefiles sufficient to build modules\ against the %{?2:%{2} }kernel package.\ %{nil} # # kernel--ipaclones-internal package # %define kernel_ipaclones_package() \ %package %{?1:%{1}-}ipaclones-internal\ Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\ Group: System Environment/Kernel\ AutoReqProv: no\ %description %{?1:%{1}-}ipaclones-internal\ This package provides *.ipa-clones files.\ %{nil} # # This macro creates a kernel--modules-internal package. # %%kernel_modules_internal_package # %define kernel_modules_internal_package() \ %package %{?1:%{1}-}modules-internal\ Summary: Extra kernel modules to match the %{?2:%{2} }kernel\ Group: System Environment/Kernel\ Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\ Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules-internal\ This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\ %{nil} # # This macro creates a kernel--modules-extra package. # %%kernel_modules_extra_package # %define kernel_modules_extra_package() \ %package %{?1:%{1}-}modules-extra\ Summary: Extra kernel modules to match the %{?2:%{2} }kernel\ Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\ Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules-extra\ This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\ %{nil} # # This macro creates a kernel--modules package. # %%kernel_modules_package # %define kernel_modules_package() \ %package %{?1:%{1}-}modules\ Summary: kernel modules to match the %{?2:%{2}-}core kernel\ Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\ Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules\ This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\ %{nil} # # this macro creates a kernel- meta package. # %%kernel_meta_package # %define kernel_meta_package() \ %package %{1}\ summary: kernel meta-package for the %{1} kernel\ Requires: kernel-%{1}-core-uname-r = %{KVERREL}%{?variant}+%{1}\ Requires: kernel-%{1}-modules-uname-r = %{KVERREL}%{?variant}+%{1}\ Provides: installonlypkg(kernel)\ %description %{1}\ The meta-package for the %{1} kernel\ %{nil} # # This macro creates a kernel- and its -devel and -debuginfo too. # %%define variant_summary The Linux kernel compiled for # %%kernel_variant_package [-n ] # %define kernel_variant_package(n:) \ %package %{?1:%{1}-}core\ Summary: %{variant_summary}\ Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Provides: installonlypkg(kernel)\ %ifarch ppc64le\ Obsoletes: kernel-bootwrapper\ %endif\ %{expand:%%kernel_reqprovconf}\ %if %{?1:1} %{!?1:0} \ %{expand:%%kernel_meta_package %{?1:%{1}}}\ %endif\ %{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ %{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ %{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ %{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ %{expand:%%kernel_debuginfo_package %{?1:%{1}}}\ %{nil} # Now, each variant package. %if %{with_pae} %define variant_summary The Linux kernel compiled for Cortex-A15 %kernel_variant_package lpae %description lpae-core This package includes a version of the Linux kernel with support for Cortex-A15 devices with LPAE and HW virtualisation support %endif %if %{with_zfcpdump} %define variant_summary The Linux kernel compiled for zfcpdump usage %kernel_variant_package zfcpdump %description zfcpdump-core The kernel package contains the Linux kernel (vmlinuz) for use by the zfcpdump infrastructure. # with_zfcpdump %endif %define variant_summary The Linux kernel compiled with extra debugging enabled %kernel_variant_package debug %description debug-core The kernel package contains the Linux kernel (vmlinuz), the core of any Linux operating system. The kernel handles the basic functions of the operating system: memory allocation, process allocation, device input and output, etc. This variant of the kernel has numerous debugging options enabled. It should only be installed when trying to gather additional information on kernel bugs, as some of these options impact performance noticably. # And finally the main -core package %define variant_summary The Linux kernel %kernel_variant_package %description core The kernel package contains the Linux kernel (vmlinuz), the core of any Linux operating system. The kernel handles the basic functions of the operating system: memory allocation, process allocation, device input and output, etc. %if %{with_ipaclones} %kernel_ipaclones_package %endif %prep %if 0%{?rhel} == 7 source scl_source enable devtoolset-8 || : source scl_source enable llvm-toolset-7.0 || : %endif # do a few sanity-checks for --with *only builds %if %{with_baseonly} %if !%{with_up}%{with_pae} echo "Cannot build --with baseonly, up build is disabled" exit 1 %endif %endif %if "%{baserelease}" == "0" echo "baserelease must be greater than zero" exit 1 %endif # more sanity checking; do it quietly if [ "%{patches}" != "%%{patches}" ] ; then for patch in %{patches} ; do if [ ! -f $patch ] ; then echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing" exit 1 fi done fi 2>/dev/null patch_command='patch -p1 -F1 -s' ApplyPatch() { local patch=$1 shift if [ ! -f $RPM_SOURCE_DIR/$patch ]; then exit 1 fi if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME%%%%%{?variant}}.spec ; then if [ "${patch:0:8}" != "patch-5." ] ; then echo "ERROR: Patch $patch not listed as a source patch in specfile" exit 1 fi fi 2>/dev/null case "$patch" in *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;; esac } # don't apply patch if it's empty ApplyOptionalPatch() { local patch=$1 shift if [ ! -f $RPM_SOURCE_DIR/$patch ]; then exit 1 fi local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}') if [ "$C" -gt 9 ]; then ApplyPatch $patch ${1+"$@"} fi } # First we unpack the kernel tarball. # If this isn't the first make prep, we use links to the existing clean tarball # which speeds things up quite a bit. # Update to latest upstream. %if 0%{?released_kernel} %define vanillaversion 5.%{base_sublevel} # non-released_kernel case %else %if 0%{?rcrev} %define vanillaversion 5.%{upstream_sublevel}-rc%{rcrev} %if 0%{?gitrev} %define vanillaversion 5.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev} %endif %else # pre-{base_sublevel+1}-rc1 case %if 0%{?gitrev} %define vanillaversion 5.%{base_sublevel}-git%{gitrev} %else %define vanillaversion 5.%{base_sublevel} %endif %endif %endif # %%{vanillaversion} : the full version name, e.g. 2.6.35-rc6-git3 # %%{kversion} : the base version, e.g. 2.6.34 # Use kernel-%%{kversion}%%{?dist} as the top-level directory name # so we can prep different trees within a single git directory. # Build a list of the other top-level kernel tree directories. # This will be used to hardlink identical vanilla subdirs. sharedirs=$(find "$PWD" -maxdepth 1 -type d -name 'kernel-5.*' \ | grep -x -v "$PWD"/kernel-%{kversion}%{?dist}) ||: # Delete all old stale trees. if [ -d kernel-%{kversion}%{?dist} ]; then cd kernel-%{kversion}%{?dist} for i in linux-* do if [ -d $i ]; then # Just in case we ctrl-c'd a prep already rm -rf deleteme.%{_target_cpu} # Move away the stale away, and delete in background. mv $i deleteme-$i rm -rf deleteme* & fi done cd .. fi # Generate new tree if [ ! -d kernel-%{kversion}%{?dist}/vanilla-%{vanillaversion} ]; then if [ -d kernel-%{kversion}%{?dist}/vanilla-%{kversion} ]; then # The base vanilla version already exists. cd kernel-%{kversion}%{?dist} # Any vanilla-* directories other than the base one are stale. for dir in vanilla-*; do [ "$dir" = vanilla-%{kversion} ] || rm -rf $dir & done else rm -f pax_global_header # Look for an identical base vanilla dir that can be hardlinked. for sharedir in $sharedirs ; do if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then break fi done if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then %setup -q -n kernel-%{kversion}%{?dist} -c -T cp -al $sharedir/vanilla-%{kversion} . else %setup -q -n kernel-%{kversion}%{?dist} -c mv linux-%{kversion} vanilla-%{kversion} fi fi %if "%{kversion}" != "%{vanillaversion}" for sharedir in $sharedirs ; do if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then break fi done if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then cp -al $sharedir/vanilla-%{vanillaversion} . else # Need to apply patches to the base vanilla version. cp -al vanilla-%{kversion} vanilla-%{vanillaversion} cd vanilla-%{vanillaversion} cp %{SOURCE12} . # Update vanilla to the latest upstream. # (non-released_kernel case only) %if 0%{?rcrev} xzcat %{SOURCE5000} | patch -p1 -F1 -s %if 0%{?gitrev} xzcat %{SOURCE5001} | patch -p1 -F1 -s %endif %else # pre-{base_sublevel+1}-rc1 case %if 0%{?gitrev} xzcat %{SOURCE5000} | patch -p1 -F1 -s %endif %endif git init git config user.email "kernel-team@fedoraproject.org" git config user.name "Fedora Kernel Team" git config gc.auto 0 git add . git commit -a -q -m "baseline" cd .. fi %endif else # We already have all vanilla dirs, just change to the top-level directory. cd kernel-%{kversion}%{?dist} fi # Now build the fedora kernel tree. cp -al vanilla-%{vanillaversion} linux-%{KVERREL} cp -v %{SOURCE9000} linux-%{KVERREL}/certs/rhel.pem cd linux-%{KVERREL} if [ ! -d .git ]; then git init git config user.email "kernel-team@fedoraproject.org" git config user.name "Fedora Kernel Team" git config gc.auto 0 git add . git commit -a -q -m "baseline" fi # released_kernel with possible stable updates %if 0%{?stable_base} # This is special because the kernel spec is hell and nothing is consistent xzcat %{SOURCE5000} | patch -p1 -F1 -s git commit -a -m "Stable update" %endif # Note: Even in the "nopatches" path some patches (build tweaks and compile # fixes) will always get applied; see patch defition above for details git am %{patches} # END OF PATCH APPLICATIONS # Any further pre-build tree manipulations happen here. chmod +x scripts/checkpatch.pl mv COPYING COPYING-%{version}-%{release} # This Prevents scripts/setlocalversion from mucking with our version numbers. touch .scmversion # Mangle /usr/bin/python shebangs to /usr/bin/python3 # Mangle all Python shebangs to be Python 3 explicitly # -p preserves timestamps # -n prevents creating ~backup files # -i specifies the interpreter for the shebang # This fixes errors such as # *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly. # We patch all sources below for which we got a report/error. pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \ tools/kvm/kvm_stat/kvm_stat \ scripts/show_delta \ scripts/diffconfig \ scripts/bloat-o-meter \ tools/perf/tests/attr.py \ tools/perf/scripts/python/stat-cpi.py \ tools/perf/scripts/python/sched-migration.py \ Documentation \ scripts/gen_compile_commands.py # only deal with configs if we are going to build for the arch %ifnarch %nobuildarches if [ -L configs ]; then rm -f configs fi # Deal with configs stuff mkdir configs cd configs # Drop some necessary files from the source dir into the buildroot cp $RPM_SOURCE_DIR/kernel-*.config . cp %{SOURCE1000} . cp %{SOURCE55} . cp %{SOURCE51} . VERSION=%{version} ./generate_all_configs.sh %{primary_target} %{debugbuildsenabled} # Merge in any user-provided local config option changes %ifnarch %nobuildarches for i in %{all_arch_configs} do mv $i $i.tmp ./merge.pl %{SOURCE1000} $i.tmp > $i rm $i.tmp done %endif %if !%{debugbuildsenabled} rm -f kernel-%{version}-*debug.config %endif # enable GCOV kernel config options if gcov is on %if %{with_gcov} for i in *.config do sed -i 's/# CONFIG_GCOV_KERNEL is not set/CONFIG_GCOV_KERNEL=y\nCONFIG_GCOV_PROFILE_ALL=y\n/' $i done %endif cp %{SOURCE52} . OPTS="" %if %{with_configchecks} OPTS="$OPTS -w -n -c" %endif ./process_configs.sh $OPTS kernel %{rpmversion} cp %{SOURCE56} . RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target} # end of kernel config %endif cd .. # # End of Configs stuff # get rid of unwanted files resulting from patch fuzz find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null # remove unnecessary SCM files find . -name .gitignore -delete >/dev/null cd .. ### ### build ### %build %if 0%{?rhel} == 7 source scl_source enable devtoolset-8 || : source scl_source enable llvm-toolset-7.0 || : %endif %if %{with_sparse} %define sparse_mflags C=1 %endif cp_vmlinux() { eu-strip --remove-comment -o "$2" "$1" } # These are for host programs that get built as part of the kernel and # are required to be packaged in kernel-devel for building external modules. # Since they are userspace binaries, they are required to pickup the hardening # flags defined in the macros. The --build-id=uuid is a trick to get around # debuginfo limitations: Typically, find-debuginfo.sh will update the build # id of all binaries to allow for parllel debuginfo installs. The kernel # can't use this because it breaks debuginfo for the vDSO so we have to # use a special mechanism for kernel and modules to be unique. Unfortunately, # we still have userspace binaries which need unique debuginfo and because # they come from the kernel package, we can't just use find-debuginfo.sh to # rewrite only those binaries. The easiest option right now is just to have # the build id be a uuid for the host programs. # # Note we need to disable these flags for cross builds because the flags # from redhat-rpm-config assume that host == target so target arch # flags cause issues with the host compiler. %if !%{with_cross} %define build_hostcflags %{?build_cflags} %define build_hostldflags %{?build_ldflags} %endif %define make make %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}" BuildKernel() { MakeTarget=$1 KernelImage=$2 Flavour=$4 DoVDSO=$3 Flav=${Flavour:++${Flavour}} InstallName=${5:-vmlinuz} DoModules=1 if [ "$Flavour" = "zfcpdump" ]; then DoModules=0 fi # Pick the right config file for the kernel we're building Config=kernel-%{version}-%{_target_cpu}${Flavour:+-${Flavour}}.config DevelDir=/usr/src/kernels/%{KVERREL}${Flav} # When the bootable image is just the ELF kernel, strip it. # We already copy the unstripped file into the debuginfo package. if [ "$KernelImage" = vmlinux ]; then CopyKernel=cp_vmlinux else CopyKernel=cp fi KernelVer=%{version}-%{release}.%{_target_cpu}${Flav} echo BUILDING A KERNEL FOR ${Flavour} %{_target_cpu}... %if 0%{?stable_update} # make sure SUBLEVEL is incremented on a stable release. Sigh 3.x. perl -p -i -e "s/^SUBLEVEL.*/SUBLEVEL = %{?stablerev}/" Makefile %endif # make sure EXTRAVERSION says what we want it to say perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -%{release}.%{_target_cpu}${Flav}/" Makefile # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme %if !0%{?rcrev} %if 0%{?gitrev} perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{upstream_sublevel}/' Makefile %endif %endif # and now to start the build process %{make} %{?_smp_mflags} mrproper cp configs/$Config .config %if %{signkernel}%{signmodules} cp $RPM_SOURCE_DIR/x509.genkey certs/. %endif Arch=`head -1 .config | cut -b 3-` echo USING ARCH=$Arch KCFLAGS="%{?kcflags}" # add kpatch flags for base kernel if [ "$Flavour" == "" ]; then KCFLAGS="$KCFLAGS %{?kpatch_kcflags}" fi %{make} ARCH=$Arch olddefconfig >/dev/null # This ensures build-ids are unique to allow parallel debuginfo perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags} if [ $DoModules -eq 1 ]; then %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1 fi mkdir -p $RPM_BUILD_ROOT/%{image_install_path} mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer %if %{with_debuginfo} mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path} %endif %ifarch %{arm} aarch64 %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb find arch/$Arch/boot/dts -name '*.dtb' -type f -delete %endif # Start installing the results install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map # We estimate the size of the initramfs because rpm needs to take this size # into consideration when performing disk space calculations. (See bz #530778) dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20 if [ -f arch/$Arch/boot/zImage.stub ]; then cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || : cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || : fi %if %{signkernel} if [ "$KernelImage" = vmlinux ]; then # We can't strip and sign $KernelImage in place, because # we need to preserve original vmlinux for debuginfo. # Use a copy for signing. $CopyKernel $KernelImage $KernelImage.tosign KernelImage=$KernelImage.tosign CopyKernel=cp fi # Sign the image if we're using EFI # aarch64 kernels are gziped EFI images KernelExtension=${KernelImage##*.} if [ "$KernelExtension" == "gz" ]; then SignImage=${KernelImage%.*} else SignImage=$KernelImage fi %ifarch x86_64 aarch64 %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0} %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1} rm vmlinuz.tmp %endif %ifarch s390x ppc64le if [ -x /usr/bin/rpm-sign ]; then rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed elif [ $DoModules -eq 1 ]; then chmod +x scripts/sign-file ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed else mv $SignImage vmlinuz.signed fi %endif if [ ! -s vmlinuz.signed ]; then echo "pesigning failed" exit 1 fi mv vmlinuz.signed $SignImage if [ "$KernelExtension" == "gz" ]; then gzip -f9 $SignImage fi # signkernel %endif $CopyKernel $KernelImage \ $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName # hmac sign the kernel for FIPS echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac" ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer sha512hmac $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer | sed -e "s,$RPM_BUILD_ROOT,," > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac; cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac if [ $DoModules -eq 1 ]; then # Override $(mod-fw) because we don't want it to install any firmware # we'll get it from the linux-firmware package and we don't want conflicts %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw= fi %if %{with_gcov} # install gcov-needed files to $BUILDROOT/$BUILD/...: # gcov_info->filename is absolute path # gcno references to sources can use absolute paths (e.g. in out-of-tree builds) # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \; %endif # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files echo '%%defattr(-,-,-)' > ../kernel${Flavour:+-${Flavour}}-ldsoconf.list if [ $DoVDSO -ne 0 ]; then %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer if [ -s ldconfig-kernel.conf ]; then install -D -m 444 ldconfig-kernel.conf \ $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Flavour:+-${Flavour}}-ldsoconf.list fi rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id fi # And save the headers/makefiles etc for building modules against # # This all looks scary, but the end result is supposed to be: # * all arch relevant include/ files # * all Makefile/Kconfig files # * all script/ files rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source) # dirs for additional modules per module-init-tools, kbuild/modules.txt mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/extra mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/internal mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates %if 0%{!?fedora:1} mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates %endif # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of # testing so just delete find . -name *.h.s -delete # first copy everything cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build if [ -s Module.markers ]; then cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build fi # create the kABI metadata for use in packaging # NOTENOTE: the name symvers is used by the rpm backend # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr # NOTENOTE: script which dynamically adds exported kernel symbol # NOTENOTE: checksums to the rpm metadata provides list. # NOTENOTE: if you change the symvers name, update the backend too echo "**** GENERATING kernel ABI metadata ****" gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz %if %{with_kabichk} echo "**** kABI checking is enabled in kernel SPEC file. ****" chmod 0755 $RPM_SOURCE_DIR/check-kabi if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Flavour ]; then cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Flavour $RPM_BUILD_ROOT/Module.kabi $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1 # for now, don't keep it around. rm $RPM_BUILD_ROOT/Module.kabi else echo "**** NOTE: Cannot find reference Module.kabi file. ****" fi %endif %if %{with_kabidupchk} echo "**** kABI DUP checking is enabled in kernel SPEC file. ****" if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Flavour ]; then cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Flavour $RPM_BUILD_ROOT/Module.kabi $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1 # for now, don't keep it around. rm $RPM_BUILD_ROOT/Module.kabi else echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****" fi %endif %if %{with_kabidw_base} # Don't build kabi base for debug kernels if [ "$Flavour" != "kdump" -a "$Flavour" != "debug" ]; then mkdir -p $RPM_BUILD_ROOT/kabi-dwarf tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/whitelists tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/whitelists echo "**** GENERATING DWARF-based kABI baseline dataset ****" chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \ "$RPM_BUILD_ROOT/kabi-dwarf/whitelists/kabi-current/kabi_whitelist_%{_target_cpu}" \ "$(pwd)" \ "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Flavour:+.${Flavour}}" || : rm -rf $RPM_BUILD_ROOT/kabi-dwarf fi %endif %if %{with_kabidwchk} if [ "$Flavour" != "kdump" ]; then mkdir -p $RPM_BUILD_ROOT/kabi-dwarf tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Flavour:+.${Flavour}}" ]; then mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/whitelists tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/whitelists echo "**** GENERATING DWARF-based kABI dataset ****" chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \ "$RPM_BUILD_ROOT/kabi-dwarf/whitelists/kabi-current/kabi_whitelist_%{_target_cpu}" \ "$(pwd)" \ "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Flavour:+.${Flavour}}.tmp" || : echo "**** kABI DWARF-based comparison report ****" $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \ "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Flavour:+.${Flavour}}" \ "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Flavour:+.${Flavour}}.tmp" || : echo "**** End of kABI DWARF-based comparison report ****" else echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****" fi rm -rf $RPM_BUILD_ROOT/kabi-dwarf fi %endif # then drop all but the needed Makefiles/Kconfig files rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py if [ -f tools/objtool/objtool ]; then cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || : fi if [ -d arch/$Arch/scripts ]; then cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || : fi if [ -f arch/$Arch/*lds ]; then cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || : fi if [ -f arch/%{asmarch}/kernel/module.lds ]; then cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*.o rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*/*.o %ifarch ppc64le cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif if [ -d arch/%{asmarch}/include ]; then cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi %ifarch aarch64 # arch/arm64/include/asm/xen references arch/arm cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ # arch/arm64/include/asm/opcodes.h references arch/arm cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif # include the machine specific headers for ARM variants, if available. %ifarch %{arm} if [ -d arch/%{asmarch}/mach-${Flavour}/include ]; then cp -a --parents arch/%{asmarch}/mach-${Flavour}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi # include a few files for 'make prepare' cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include %ifarch i686 x86_64 # files for 'make prepare' to succeed with kernel-devel cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/entry/syscalls/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/entry/syscalls/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif # Make sure the Makefile and version.h have a matching timestamp so that # external modules can be built touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h # Copy .config to include/config/auto.conf so "make prepare" is unnecessary. cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf %if %{with_debuginfo} eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id # # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm # mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer %endif find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames # mark modules executable so that strip-to-file can strip them xargs --no-run-if-empty chmod u+x < modnames # Generate a list of modules for block and networking. grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA | sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef collect_modules_list() { sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef | LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1 if [ ! -z "$3" ]; then sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1 fi } collect_modules_list networking \ 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice' collect_modules_list block \ 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko' collect_modules_list drm \ 'drm_open|drm_init' collect_modules_list modesetting \ 'drm_crtc_init' # detect missing or incorrect license tags ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \ grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1 # remove files that will be auto generated by depmod at rpm -i time pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/ rm -f modules.{alias*,builtin.bin,dep*,*map,symbols*,devname,softdep} popd # Call the modules-extra script to move things around %{SOURCE24} $RPM_BUILD_ROOT/lib/modules/$KernelVer $RPM_SOURCE_DIR/mod-extra.list # Blacklist net autoloadable modules in modules-extra %{SOURCE19} $RPM_BUILD_ROOT lib/modules/$KernelVer # Call the modules-extra script for internal modules %{SOURCE24} $RPM_BUILD_ROOT/lib/modules/$KernelVer %{SOURCE54} internal # # Generate the kernel-core and kernel-modules files lists # # Copy the System.map file for depmod to use, and create a backup of the # full module tree so we can restore it after we're done filtering cp System.map $RPM_BUILD_ROOT/. pushd $RPM_BUILD_ROOT mkdir restore cp -r lib/modules/$KernelVer/* restore/. # don't include anything going into k-m-e and k-m-i in the file lists rm -rf lib/modules/$KernelVer/{extra,internal} if [ $DoModules -eq 1 ]; then # Find all the module files and filter them out into the core and # modules lists. This actually removes anything going into -modules # from the dir. find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list cp $RPM_SOURCE_DIR/filter-*.sh . ./filter-modules.sh modules.list %{_target_cpu} rm filter-*.sh # Run depmod on the resulting module tree and make sure it isn't broken depmod -b . -aeF ./System.map $KernelVer &> depmod.out if [ -s depmod.out ]; then echo "Depmod failure" cat depmod.out exit 1 else rm depmod.out fi else # Ensure important files/directories exist to let the packaging succeed echo '%%defattr(-,-,-)' > modules.list echo '%%defattr(-,-,-)' > k-d.list mkdir -p lib/modules/$KernelVer/kernel # Add files usually created by make modules, needed to prevent errors # thrown by depmod during package installation touch lib/modules/$KernelVer/modules.order touch lib/modules/$KernelVer/modules.builtin fi # remove files that will be auto generated by depmod at rpm -i time pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/ rm -f modules.{alias*,builtin.bin,dep*,*map,symbols*,devname,softdep} popd # Go back and find all of the various directories in the tree. We use this # for the dir lists in kernel-core find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list # Cleanup rm System.map cp -r restore/* lib/modules/$KernelVer/. rm -rf restore popd # Make sure the files lists start with absolute paths or rpmbuild fails. # Also add in the dir entries sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Flavour:+-${Flavour}}-modules.list sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Flavour:+-${Flavour}}-core.list sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Flavour:+-${Flavour}}-core.list # Cleanup rm -f $RPM_BUILD_ROOT/k-d.list rm -f $RPM_BUILD_ROOT/modules.list rm -f $RPM_BUILD_ROOT/module-dirs.list %if %{signmodules} if [ $DoModules -eq 1 ]; then # Save the signing keys so we can sign the modules in __modsign_install_post cp certs/signing_key.pem certs/signing_key.pem.sign${Flav} cp certs/signing_key.x509 certs/signing_key.x509.sign${Flav} fi %endif # Move the devel headers out of the root file system mkdir -p $RPM_BUILD_ROOT/usr/src/kernels mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir # This is going to create a broken link during the build, but we don't use # it after this point. We need the link to actually point to something # when kernel-devel is installed, and a relative link doesn't work across # the F17 UsrMove feature. ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build # prune junk from kernel-devel find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete # build a BLS config for this kernel %{SOURCE53} "$KernelVer" "$RPM_BUILD_ROOT" "%{?variant}" # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer %ifarch x86_64 aarch64 install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer %else install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer %endif %ifarch s390x ppc64le if [ $DoModules -eq 1 ]; then if [ -x /usr/bin/rpm-sign ]; then install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename} else install -m 0644 certs/signing_key.x509.sign${Flav} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer openssl x509 -in certs/signing_key.pem.sign${Flav} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename} chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename} fi fi %endif %if %{with_ipaclones} MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p') if [ -z "$MAXPROCS" ]; then MAXPROCS=1 fi if [ "$Flavour" == "" ]; then mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}" fi %endif } ### # DO it... ### # prepare directories rm -rf $RPM_BUILD_ROOT mkdir -p $RPM_BUILD_ROOT/boot mkdir -p $RPM_BUILD_ROOT%{_libexecdir} cd linux-%{KVERREL} %if %{with_debug} BuildKernel %make_target %kernel_image %{_use_vdso} debug %endif %if %{with_zfcpdump} BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump %endif %if %{with_pae} BuildKernel %make_target %kernel_image %{use_vdso} lpae %endif %if %{with_up} BuildKernel %make_target %kernel_image %{_use_vdso} %endif %global perf_make \ make -s EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 prefix=%{_prefix} PYTHON=%{__python3} %if %{with_perf} # perf # make sure check-headers.sh is executable chmod +x tools/perf/check-headers.sh %{perf_make} DESTDIR=$RPM_BUILD_ROOT all %endif %global tools_make \ %{make} CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" V=1 %if %{with_tools} %ifarch %{cpupowerarchs} # cpupower # make sure version-gen.sh is executable. chmod +x tools/power/cpupower/utils/version-gen.sh %{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false %ifarch x86_64 pushd tools/power/cpupower/debug/x86_64 %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode popd %endif %ifarch x86_64 pushd tools/power/x86/x86_energy_perf_policy/ %{tools_make} popd pushd tools/power/x86/turbostat %{tools_make} popd pushd tools/power/x86/intel-speed-select %{make} popd %endif %endif pushd tools/thermal/tmon/ %{tools_make} popd pushd tools/iio/ %{make} popd pushd tools/gpio/ %{make} popd %endif %global bpftool_make \ make EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT V=1 %if %{with_bpftool} pushd tools/bpf/bpftool %{bpftool_make} popd %endif %if %{with_selftests} %{make} -s ARCH=$Arch V=1 samples/bpf/ pushd tools/testing/selftests # We need to install here because we need to call make with ARCH set which # doesn't seem possible to do in the install section. %{make} -s ARCH=$Arch V=1 TARGETS="bpf livepatch net" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests install popd %endif %if %{with_doc} # Make the HTML pages. make PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail} # sometimes non-world-readable files sneak into the kernel source tree chmod -R a=rX Documentation find Documentation -type d | xargs chmod u+w %endif # In the modsign case, we do 3 things. 1) We check the "flavour" and hard # code the value in the following invocations. This is somewhat sub-optimal # but we're doing this inside of an RPM macro and it isn't as easy as it # could be because of that. 2) We restore the .tmp_versions/ directory from # the one we saved off in BuildKernel above. This is to make sure we're # signing the modules we actually built/installed in that flavour. 3) We # grab the arch and invoke mod-sign.sh command to actually sign the modules. # # We have to do all of those things _after_ find-debuginfo runs, otherwise # that will strip the signature off of the modules. # # Don't sign modules for the zfcpdump flavour as it is monolithic. %define __modsign_install_post \ if [ "%{signmodules}" -eq "1" ]; then \ if [ "%{with_pae}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \ fi \ if [ "%{with_debug}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \ fi \ if [ "%{with_up}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \ fi \ fi \ if [ "%{zipmodules}" -eq "1" ]; then \ find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | %{SOURCE79} %{?_smp_mflags}; \ fi \ %{nil} ### ### Special hacks for debuginfo subpackages. ### # This macro is used by %%install, so we must redefine it before that. %define debug_package %{nil} %if %{with_debuginfo} %ifnarch noarch %global __debug_package 1 %files -f debugfiles.list debuginfo-common-%{_target_cpu} %endif %endif # We don't want to package debuginfo for self-tests and samples but # we have to delete them to avoid an error messages about unpackaged # files. # Delete the debuginfo for for kernel-devel files %define __remove_unwanted_dbginfo_install_post \ if [ "%{with_selftests}" -ne "0" ]; then \ rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \ rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \ fi \ rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \ %{nil} # # Disgusting hack alert! We need to ensure we sign modules *after* all # invocations of strip occur, which is in __debug_install_post if # find-debuginfo.sh runs, and __os_install_post if not. # %define __spec_install_post \ %{?__debug_package:%{__debug_install_post}}\ %{__arch_install_post}\ %{__os_install_post}\ %{__remove_unwanted_dbginfo_install_post}\ %{__modsign_install_post} ### ### install ### %install %if 0%{?rhel} == 7 source scl_source enable devtoolset-8 || : source scl_source enable llvm-toolset-7.0 || : %endif cd linux-%{KVERREL} %if %{with_doc} docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{rpmversion} # copy the source over mkdir -p $docdir tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir # with_doc %endif # We have to do the headers install before the tools install because the # kernel headers_install will remove any header files in /usr/include that # it doesn't install itself. %if %{with_headers} # Install kernel headers make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install find $RPM_BUILD_ROOT/usr/include \ \( -name .install -o -name .check -o \ -name ..install.cmd -o -name ..check.cmd \) -delete %endif %if %{with_cross_headers} %if 0%{?fedora}%{?centos} HDR_ARCH_LIST='arm arm64 powerpc s390 x86' %else HDR_ARCH_LIST='arm64 powerpc s390 x86' %endif mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers for arch in $HDR_ARCH_LIST; do mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} make ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install done find $RPM_BUILD_ROOT/usr/tmp-headers \ \( -name .install -o -name .check -o \ -name ..install.cmd -o -name ..check.cmd \) -delete # Copy all the architectures we care about to their respective asm directories for arch in $HDR_ARCH_LIST ; do mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/ done rm -rf $RPM_BUILD_ROOT/usr/tmp-headers %endif %if %{with_kernel_abi_whitelists} # kabi directory INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/ mkdir -p $INSTALL_KABI_PATH # install kabi releases directories tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH # with_kernel_abi_whitelists %endif %if %{with_perf} # perf tool binary and supporting scripts/binaries %{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin install-traceevent-plugins # remove the 'trace' symlink. rm -f %{buildroot}%{_bindir}/trace # For both of the below, yes, this should be using a macro but right now # it's hard coded and we don't actually want it anyway right now. # Whoever wants examples can fix it up! # remove examples rm -rf %{buildroot}/usr/lib/perf/examples # remove the stray files that somehow got packaged rm -rf %{buildroot}/usr/lib/perf/include/bpf/bpf.h rm -rf %{buildroot}/usr/lib/perf/include/bpf/stdio.h rm -rf %{buildroot}/usr/lib/perf/include/bpf/linux/socket.h rm -rf %{buildroot}/usr/lib/perf/include/bpf/pid_filter.h rm -rf %{buildroot}/usr/lib/perf/include/bpf/unistd.h # python-perf extension %{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext # perf man pages (note: implicit rpm magic compresses them later) mkdir -p %{buildroot}/%{_mandir}/man1 %{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man %endif %if %{with_tools} %ifarch %{cpupowerarchs} %{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install rm -f %{buildroot}%{_libdir}/*.{a,la} %find_lang cpupower mv cpupower.lang ../ %ifarch x86_64 pushd tools/power/cpupower/debug/x86_64 install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode popd %endif chmod 0755 %{buildroot}%{_libdir}/libcpupower.so* mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower %endif %ifarch x86_64 mkdir -p %{buildroot}%{_mandir}/man8 pushd tools/power/x86/x86_energy_perf_policy %{tools_make} DESTDIR=%{buildroot} install popd pushd tools/power/x86/turbostat %{tools_make} DESTDIR=%{buildroot} install popd pushd tools/power/x86/intel-speed-select %{tools_make} CFLAGS+="-D_GNU_SOURCE -Iinclude" DESTDIR=%{buildroot} install popd %endif pushd tools/thermal/tmon %{tools_make} INSTALL_ROOT=%{buildroot} install popd pushd tools/iio make DESTDIR=%{buildroot} install popd pushd tools/gpio make DESTDIR=%{buildroot} install popd pushd tools/kvm/kvm_stat make INSTALL_ROOT=%{buildroot} install-tools make INSTALL_ROOT=%{buildroot} install-man popd %endif %if %{with_bpftool} pushd tools/bpf/bpftool %{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install popd %endif %if %{with_selftests} pushd samples install -d %{buildroot}%{_libexecdir}/ksamples # install bpf samples pushd bpf install -d %{buildroot}%{_libexecdir}/ksamples/bpf find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \; install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf # test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the # kernel tree. Just remove it. rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf popd # install pktgen samples pushd pktgen install -d %{buildroot}%{_libexecdir}/ksamples/pktgen find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \; find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \; popd popd # install drivers/net/mlxsw selftests pushd tools/testing/selftests/drivers/net/mlxsw find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \; find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \; find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \; popd # install net/forwarding selftests pushd tools/testing/selftests/net/forwarding find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \; find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \; find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \; popd # install tc-testing selftests pushd tools/testing/selftests/tc-testing find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \; find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \; find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \; popd # install livepatch selftests pushd tools/testing/selftests/livepatch find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \; find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \; find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \; popd %endif # We have to do the headers checksum calculation after the tools install because # these might end up installing their own set of headers on top of kernel's %if %{with_headers} # compute a content hash to export as Provides: kernel-headers-checksum HEADERS_CHKSUM=$(export LC_ALL=C; find $RPM_BUILD_ROOT/usr/include -type f -name "*.h" \ ! -path $RPM_BUILD_ROOT/usr/include/linux/version.h | \ sort | xargs cat | sha1sum - | cut -f 1 -d ' '); # export the checksum via usr/include/linux/version.h, so the dynamic # find-provides can grab the hash to update it accordingly echo "#define KERNEL_HEADERS_CHECKSUM \"$HEADERS_CHKSUM\"" >> $RPM_BUILD_ROOT/usr/include/linux/version.h %endif ### ### clean ### ### ### scripts ### %if %{with_tools} %post -n kernel-tools-libs /sbin/ldconfig %postun -n kernel-tools-libs /sbin/ldconfig %endif # # This macro defines a %%post script for a kernel*-devel package. # %%kernel_devel_post [] # Note we don't run hardlink if ostree is in use, as ostree is # a far more sophisticated hardlink implementation. # https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526 # %define kernel_devel_post() \ %{expand:%%post %{?1:%{1}-}devel}\ if [ -f /etc/sysconfig/kernel ]\ then\ . /etc/sysconfig/kernel || exit $?\ fi\ if [ "$HARDLINK" != "no" -a -x /usr/sbin/hardlink -a ! -e /run/ostree-booted ] \ then\ (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\ /usr/bin/find . -type f | while read f; do\ hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f\ done)\ fi\ %{nil} # # This macro defines a %%post script for a kernel*-modules-extra package. # It also defines a %%postun script that does the same thing. # %%kernel_modules_extra_post [] # %define kernel_modules_extra_post() \ %{expand:%%post %{?1:%{1}-}modules-extra}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil}\ %{expand:%%postun %{?1:%{1}-}modules-extra}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil} # # This macro defines a %%post script for a kernel*-modules-internal package. # It also defines a %%postun script that does the same thing. # %%kernel_modules_internal_post [] # %define kernel_modules_internal_post() \ %{expand:%%post %{?1:%{1}-}modules-internal}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil}\ %{expand:%%postun %{?1:%{1}-}modules-internal}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil} # # This macro defines a %%post script for a kernel*-modules package. # It also defines a %%postun script that does the same thing. # %%kernel_modules_post [] # %define kernel_modules_post() \ %{expand:%%post %{?1:%{1}-}modules}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil}\ %{expand:%%postun %{?1:%{1}-}modules}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil} # This macro defines a %%posttrans script for a kernel package. # %%kernel_variant_posttrans [] # More text can follow to go at the end of this variant's %%post. # %define kernel_variant_posttrans() \ %{expand:%%posttrans %{?1:%{1}-}core}\ %if 0%{!?fedora:1}\ if [ -x %{_sbindir}/weak-modules ]\ then\ %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\ fi\ %endif\ /bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\ %{nil} # # This macro defines a %%post script for a kernel package and its devel package. # %%kernel_variant_post [-v ] [-r ] # More text can follow to go at the end of this variant's %%post. # %define kernel_variant_post(v:r:) \ %{expand:%%kernel_devel_post %{?-v*}}\ %{expand:%%kernel_modules_post %{?-v*}}\ %{expand:%%kernel_modules_extra_post %{?-v*}}\ %{expand:%%kernel_modules_internal_post %{?-v*}}\ %{expand:%%kernel_variant_posttrans %{?-v*}}\ %{expand:%%post %{?-v*:%{-v*}-}core}\ %{-r:\ if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\ [ -f /etc/sysconfig/kernel ]; then\ /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\ fi}\ %{nil} # # This macro defines a %%preun script for a kernel package. # %%kernel_variant_preun # %define kernel_variant_preun() \ %{expand:%%preun %{?1:%{1}-}core}\ /bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\ %if 0%{!?fedora:1}\ if [ -x %{_sbindir}/weak-modules ]\ then\ %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\ fi\ %endif\ %{nil} %kernel_variant_preun %kernel_variant_post -r kernel-smp %if %{with_pae} %kernel_variant_preun lpae %kernel_variant_post -v lpae -r (kernel|kernel-smp) %endif %kernel_variant_preun debug %kernel_variant_post -v debug %if %{with_zfcpdump} %kernel_variant_preun zfcpdump %kernel_variant_post -v zfcpdump %endif if [ -x /sbin/ldconfig ] then /sbin/ldconfig -X || exit $? fi ### ### file lists ### %if %{with_headers} %files headers /usr/include/* %endif %if %{with_cross_headers} %files cross-headers /usr/*-linux-gnu/include/* %endif %if %{with_kernel_abi_whitelists} %files -n kernel-abi-whitelists /lib/modules/kabi-* %endif %if %{with_kabidw_base} %ifarch x86_64 s390x ppc64 ppc64le aarch64 %files kabidw-base %defattr(-,root,root) /kabidw-base/%{_target_cpu}/* %endif %endif # only some architecture builds need kernel-doc %if %{with_doc} %files doc %defattr(-,root,root) %{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation/* %dir %{_datadir}/doc/kernel-doc-%{rpmversion}/Documentation %dir %{_datadir}/doc/kernel-doc-%{rpmversion} %endif %if %{with_perf} %files -n perf %{_bindir}/perf %{_libdir}/libperf-jvmti.so %dir %{_libdir}/traceevent/plugins %{_libdir}/traceevent/plugins/* %dir %{_libexecdir}/perf-core %{_libexecdir}/perf-core/* %{_datadir}/perf-core/* %{_mandir}/man[1-8]/perf* %{_sysconfdir}/bash_completion.d/perf %doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt %{_docdir}/perf-tip/tips.txt %files -n python3-perf %{python3_sitearch}/* %if %{with_debuginfo} %files -f perf-debuginfo.list -n perf-debuginfo %files -f python3-perf-debuginfo.list -n python3-perf-debuginfo %endif # with_perf %endif %if %{with_tools} %ifnarch %{cpupowerarchs} %files -n kernel-tools %else %files -n kernel-tools -f cpupower.lang %{_bindir}/cpupower %{_datadir}/bash-completion/completions/cpupower %ifarch x86_64 %{_bindir}/centrino-decode %{_bindir}/powernow-k8-decode %endif %{_unitdir}/cpupower.service %{_mandir}/man[1-8]/cpupower* %config(noreplace) %{_sysconfdir}/sysconfig/cpupower %ifarch x86_64 %{_bindir}/x86_energy_perf_policy %{_mandir}/man8/x86_energy_perf_policy* %{_bindir}/turbostat %{_mandir}/man8/turbostat* %{_bindir}/intel-speed-select %endif # cpupowerarchs %endif %{_bindir}/tmon %{_bindir}/iio_event_monitor %{_bindir}/iio_generic_buffer %{_bindir}/lsiio %{_bindir}/lsgpio %{_bindir}/gpio-hammer %{_bindir}/gpio-event-mon %{_mandir}/man1/kvm_stat* %{_bindir}/kvm_stat %if %{with_debuginfo} %files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo %endif %ifarch %{cpupowerarchs} %files -n kernel-tools-libs %{_libdir}/libcpupower.so.0 %{_libdir}/libcpupower.so.0.0.1 %files -n kernel-tools-libs-devel %{_libdir}/libcpupower.so %{_includedir}/cpufreq.h %endif # with_tools %endif %if %{with_bpftool} %files -n bpftool %{_sbindir}/bpftool %{_sysconfdir}/bash_completion.d/bpftool %{_mandir}/man8/bpftool-cgroup.8.gz %{_mandir}/man8/bpftool-map.8.gz %{_mandir}/man8/bpftool-prog.8.gz %{_mandir}/man8/bpftool-perf.8.gz %{_mandir}/man8/bpftool.8.gz %{_mandir}/man7/bpf-helpers.7.gz %{_mandir}/man8/bpftool-net.8.gz %{_mandir}/man8/bpftool-feature.8.gz %{_mandir}/man8/bpftool-btf.8.gz %if %{with_debuginfo} %files -f bpftool-debuginfo.list -n bpftool-debuginfo %defattr(-,root,root) %endif %endif %if %{with_selftests} %files selftests-internal %{_libexecdir}/ksamples %{_libexecdir}/kselftests %endif # empty meta-package %ifnarch %nobuildarches noarch %files %endif %if %{with_gcov} %ifarch x86_64 s390x ppc64le aarch64 %files gcov %{_builddir} %endif %endif # This is %%{image_install_path} on an arch where that includes ELF files, # or empty otherwise. %define elf_image_install_path %{?kernel_image_elf:%{image_install_path}} # # This macro defines the %%files sections for a kernel package # and its devel and debuginfo packages. # %%kernel_variant_files [-k vmlinux] # %define kernel_variant_files(k:) \ %if %{2}\ %{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\ %{!?_licensedir:%global license %%doc}\ %license linux-%{KVERREL}/COPYING-%{version}-%{release}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\ %ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \ %ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \ %ifarch %{arm} aarch64\ /lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \ %ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \ %endif\ %attr(600,root,root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\ %ghost /boot/System.map-%{KVERREL}%{?3:+%{3}}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\ /lib/modules/%{KVERREL}%{?3:+%{3}}/config\ %if 0%{?rhel} == 7\ /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\ %else\ %ghost /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\ %endif\ %ghost /boot/config-%{KVERREL}%{?3:+%{3}}\ %ghost /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\ %dir /lib/modules\ %dir /lib/modules/%{KVERREL}%{?3:+%{3}}\ %dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\ /lib/modules/%{KVERREL}%{?3:+%{3}}/build\ /lib/modules/%{KVERREL}%{?3:+%{3}}/source\ /lib/modules/%{KVERREL}%{?3:+%{3}}/updates\ /lib/modules/%{KVERREL}%{?3:+%{3}}/bls.conf\ %if 0%{!?fedora:1}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\ %endif\ %{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}/kernel-signing-ca*.cer\ %ifarch s390x ppc64le\ %if 0%{!?4:1}\ %{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}/%{signing_key_filename} \ %endif\ %endif\ %if %{1}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\ %endif\ /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\ %{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\ %{expand:%%files %{?3:%{3}-}devel}\ %defverify(not mtime)\ /usr/src/kernels/%{KVERREL}%{?3:+%{3}}\ %{expand:%%files %{?3:%{3}-}modules-extra}\ %config(noreplace) /etc/modprobe.d/*-blacklist.conf\ /lib/modules/%{KVERREL}%{?3:+%{3}}/extra\ %{expand:%%files %{?3:%{3}-}modules-internal}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/internal\ %if %{with_debuginfo}\ %ifnarch noarch\ %{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\ %endif\ %endif\ %if %{?3:1} %{!?3:0}\ %{expand:%%files %{3}}\ %endif\ %endif\ %{nil} %kernel_variant_files %{_use_vdso} %{with_up} %kernel_variant_files %{_use_vdso} %{with_debug} debug %kernel_variant_files %{use_vdso} %{with_pae} lpae %kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump 1 %define kernel_variant_ipaclones(k:) \ %if %{1}\ %if %{with_ipaclones}\ %{expand:%%files %{?2:%{2}-}ipaclones-internal}\ %defattr(-,root,root)\ %defverify(not mtime)\ /usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\ %endif\ %endif\ %{nil} %kernel_variant_ipaclones %{with_up} # plz don't put in a version string unless you're going to tag # and build. # # %changelog * Sun Dec 20 2020 Pablo Greco - 5.4.84-200 - Update to version v5.4.84 * Sun Oct 18 2020 Pablo Greco - 5.4.72-200 - Update to version v5.4.72 - Add initial bits for secure boot - Remove upstreamed patches * Sat Sep 12 2020 Pablo Greco - 5.4.65-200 - Update to version v5.4.65 * Sun Aug 23 2020 Pablo Greco - 5.4.60-200 - Update to version v5.4.60 * Fri Aug 7 2020 Pablo Greco - 5.4.56-200 - Update to version v5.4.56 * Sun Jul 26 2020 Pablo Greco - 5.4.53-200 - Update to 5.4.53 * Tue Jul 14 2020 Pablo Greco - 5.4.51-200 - Update to 5.4.51 - Backport Wireguard support * Sat Jun 27 2020 Pablo Greco - 5.4.49-200 - Update to 5.4.49 * Thu May 21 2020 Pablo Greco - 5.4.42-200 - Update to 5.4.42 * Sun May 3 2020 Pablo Greco - 5.4.38-200 - Update to 5.4.38 - Drop ASoC patches * Sun Mar 29 2020 Pablo Greco - 5.4.28-200 - Update to 5.4.28 - Use gcc 8 in CentOS7 * Sat Mar 14 2020 Pablo Greco - 5.4.25-200 - Update to 5.4.25 * Wed Feb 26 2020 Pablo Greco - 5.4.22-200 - Update to 5.4.22 * Mon Feb 24 2020 Pablo Greco - 5.4.20-200 - Import from f31 - Remove Fedora signing token - Disable CONFIG_DEBUG_INFO_BTF - Import headers and tools from Fedora - Fix BR foor CentOS 7 - aarch64 mmap fixes - aarch64 kvm fixes