diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..39a9ee1
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1 @@
+SOURCES/ipset-6.38.tar.bz2
diff --git a/.ipset.metadata b/.ipset.metadata
new file mode 100644
index 0000000..9e70132
--- /dev/null
+++ b/.ipset.metadata
@@ -0,0 +1 @@
+7e5a25c449067e95c2e3a2c60768a1e301f12458 SOURCES/ipset-6.38.tar.bz2
diff --git a/SOURCES/ipset-config b/SOURCES/ipset-config
new file mode 100644
index 0000000..decb760
--- /dev/null
+++ b/SOURCES/ipset-config
@@ -0,0 +1,5 @@
+# Save current ipsets on stop.
+#   Value: yes|no,  default: no
+# Saves all ipsets to /etc/ipset/ipset if service gets stopped
+# (e.g. on system shutdown).
+IPSET_SAVE_ON_STOP="no"
diff --git a/SOURCES/ipset.save-legacy b/SOURCES/ipset.save-legacy
new file mode 100644
index 0000000..39db1cf
--- /dev/null
+++ b/SOURCES/ipset.save-legacy
@@ -0,0 +1,2 @@
+#!/bin/bash
+exec /usr/libexec/ipset/ipset.start-stop save
diff --git a/SOURCES/ipset.service b/SOURCES/ipset.service
new file mode 100644
index 0000000..65c3121
--- /dev/null
+++ b/SOURCES/ipset.service
@@ -0,0 +1,19 @@
+[Unit]
+Description=IP sets for iptables
+Before=iptables.service
+Before=ip6tables.service
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+ExecStart=/usr/libexec/ipset/ipset.start-stop start
+ExecStop=/usr/libexec/ipset/ipset.start-stop stop
+ExecReload=/usr/libexec/ipset/ipset.start-stop reload
+# Save current ipset entries on stop.
+#   Value: yes|no,  default: no
+# Saves all ipsets to /etc/sysconfig/ipset if ipset gets stopped
+Environment=IPSET_SAVE_ON_STOP=no
+EnvironmentFile=-/etc/sysconfig/ipset-config
+
+[Install]
+WantedBy=basic.target
diff --git a/SOURCES/ipset.start-stop b/SOURCES/ipset.start-stop
new file mode 100644
index 0000000..61178c1
--- /dev/null
+++ b/SOURCES/ipset.start-stop
@@ -0,0 +1,250 @@
+#!/bin/sh
+#
+# ipset      Start and stop ipset firewall sets
+#
+# config: /etc/sysconfig/ipset-config
+
+IPSET_BIN=/usr/sbin/ipset
+IPSET_CONFIG=/etc/sysconfig/ipset-config
+IPSET_DATA_COMPAT=/etc/sysconfig/ipset
+IPSET_DATA_COMPAT_BACKUP=${IPSET_DATA_COMPAT}.save
+IPSET_DATA_DIR=/etc/sysconfig/ipset.d
+IPSET_DATA_DIR_BACKUP=${IPSET_DATA_DIR}.save
+IPSET_DATA_SAVED_FLAG=${IPSET_DATA_DIR}/.saved
+IPSET_LOCK=/run/ipset.lock
+IPSET_RUN=/run/ipset.run
+CLEAN_FILES=""
+
+trap "rm -rf \${CLEAN_FILES}" EXIT
+
+[ -x ${IPSET_BIN} ] || { echo "ipset: Cannot execute ${IPSET_BIN}" >&2; exit 5; }
+
+# Source ipset configuration
+[ -f ${IPSET_CONFIG} ] && . ${IPSET_CONFIG}
+
+set -f
+
+lock() {
+	CLEAN_FILES="${CLEAN_FILES} ${IPSET_LOCK}"
+	until mkdir ${IPSET_LOCK} 2>/dev/null; do :; done
+}
+
+save() {
+	fail=0
+
+	# Make backups of existing configuration first, if any
+	[ -d ${IPSET_DATA_DIR} ] && mv -Tf ${IPSET_DATA_DIR} ${IPSET_DATA_DIR_BACKUP}
+	[ -f ${IPSET_DATA_COMPAT} ] && mv -Tf ${IPSET_DATA_COMPAT} ${IPSET_DATA_COMPAT_BACKUP}
+
+	rm -f ${IPSET_DATA_SAVED_FLAG}
+
+	# Save each set in a separate file
+	mkdir -pm 700 ${IPSET_DATA_DIR}
+	IFS="
+"
+	for set in $(${IPSET_BIN} list -n -t); do
+		# Empty name allowed, use ".set" as suffix. 'ipset save' doesn't
+		# quote set names with spaces: if we have a space in the name,
+		# work around this by quoting it ourselves in the output.
+		if expr index "${set}" " " >/dev/null; then
+			:> "${IPSET_DATA_DIR}/${set}.set"
+			for line in $(${IPSET_BIN} save "${set}"); do
+				create=0
+				echo "${line}" | grep -q "^create " && create=1
+				if [ $create -eq 1 ]; then
+					line=${line#create *}
+				else
+					line=${line#add *}
+				fi
+				line=${line#${set} *}
+				set="$(echo ${set} | sed 's/"/\\"/'g)"
+				if [ $create -eq 1 ]; then
+					echo "create \"${set}\" ${line}" >> "${IPSET_DATA_DIR}/${set}.set"
+				else
+					echo "add \"${set}\" ${line}" >> "${IPSET_DATA_DIR}/${set}.set"
+				fi
+			done
+		else
+			${IPSET_BIN} save "${set}" > "${IPSET_DATA_DIR}/${set}.set" || fail=1
+		fi
+		[ -f "${IPSET_DATA_DIR}/${set}.set" ] && chmod 600 "${IPSET_DATA_DIR}/${set}.set"
+		[ $fail -eq 1 ] && echo "ipset: Cannot save set ${set}" >&2 && unset IFS && return 1
+	done
+	touch ${IPSET_DATA_SAVED_FLAG} || { unset IFS; return 1; }
+	unset IFS
+
+	# Done: remove backups
+	rm -rf ${IPSET_DATA_DIR_BACKUP}
+	rm -rf ${IPSET_DATA_COMPAT_BACKUP}
+
+	return 0
+}
+
+load() {
+	if [ -f ${IPSET_DATA_SAVED_FLAG} ]; then
+		# If we have a cleanly saved directory with all sets, we can
+		# delete any left-overs and use it
+		rm -rf ${IPSET_DATA_DIR_BACKUP}
+		rm -f ${IPSET_DATA_COMPAT_BACKUP}
+	else
+		# If sets weren't cleanly saved, restore from backups
+		[ -d ${IPSET_DATA_DIR_BACKUP} ] && rm -rf ${IPSET_DATA_DIR} && mv -Tf ${IPSET_DATA_DIR_BACKUP} ${IPSET_DATA_DIR}
+		[ -f ${IPSET_DATA_COMPAT_BACKUP} ] && rm -f ${IPSET_DATA_COMPAT} && mv -Tf ${IPSET_DATA_COMPAT_BACKUP} ${IPSET_DATA_COMPAT}
+	fi
+
+	if [ ! -d ${IPSET_DATA_DIR} -a ! -f ${IPSET_DATA_COMPAT} ]; then
+		echo "ipset: No existing configuration available, none loaded"
+		touch ${IPSET_RUN}
+		return
+	fi
+
+	# Merge all sets into temporary file
+	merged="$(mktemp -q /tmp/ipset.XXXXXX)"
+	CLEAN_FILES="${CLEAN_FILES} ${merged}"
+	chmod 600 "${merged}"
+	set +f
+	if [ -d ${IPSET_DATA_DIR} ]; then
+		# Copy the first lines of each saved set first, as they create
+		# the sets, then the rest: list:set entries depend on other
+		# sets, so make sure they all get created first
+		for f in ${IPSET_DATA_DIR}/*; do
+			[ "${f}" = "${IPSET_DATA_DIR}/*" ] && break
+			head -n1 "${f}" >> ${merged}
+		done
+		for f in ${IPSET_DATA_DIR}/*; do
+			[ "${f}" = "${IPSET_DATA_DIR}/*" ] && break
+			tail -n +2 "${f}" >> ${merged}
+		done
+	fi
+	set -f
+	[ -f ${IPSET_DATA_COMPAT} ] && cat ${IPSET_DATA_COMPAT} >> ${merged}
+
+	# Drop sets that aren't in saved data, mark conflicts with existing sets
+	conflicts=""
+	IFS="
+"
+	for set in $(${IPSET_BIN} list -n -t); do
+		grep -q "^create ${set} " ${merged} && conflicts="${conflicts}|${set}" && continue
+		${IPSET_BIN} destroy "${set}" 2>/dev/null
+		# We can't destroy the set if it's in use, flush it instead
+		[ $? -ne 0 ] && ${IPSET_BIN} flush "${set}"
+	done
+	unset IFS
+	conflicts="${conflicts#|*}"
+
+	# Common case: if we have no conflicts, just restore in one shot
+	if [ -z "${conflicts}" ]; then
+		${IPSET_BIN} restore -! < ${merged}
+		[ $? -ne 0 ] && echo "ipset: Failed to restore configured sets" >&2
+		rm ${merged}
+		CLEAN_FILES="${CLEAN_FILES%* ${merged}}"
+		touch ${IPSET_RUN}
+		return
+	fi
+
+	# Find a salt for md5sum that makes names of saved sets unique
+	salt=0
+	while true; do
+		unique=1
+		IFS="
+"
+		for set in $(${IPSET_BIN} list -n -t); do
+			grep -q "^create $(echo ${salt}${set} | md5sum | head -c31) " ${merged}
+			[ $? -eq 0 ] && unique=0 && break
+		done
+		unset IFS
+		[ ${unique} -eq 1 ] && break
+		salt=$((salt + 1))
+	done
+
+	# Add sets, mangling names for conflicting sets
+	awk '/^(add|create) ('"${conflicts}"')/ { printf "%s ",$1; system("echo '${salt}'" $2 " | md5sum | head -c31"); $1=""; $2=""; print; next} {print}' ${merged} | ${IPSET_BIN} restore -!
+
+	[ $? -ne 0 ] && echo "ipset: Failed to restore configured sets" >&2
+
+	# Swap and delete old sets
+	IFS='|'
+	for set in ${conflicts}; do
+		mangled="$(echo ${salt}${set} | md5sum | head -c31)"
+		${IPSET_BIN} swap "${set}" "${mangled}" 2>/dev/null
+		if [ $? -ne 0 ]; then
+			# This fails if set types are different: try to destroy
+			# existing set
+			${IPSET_BIN} destroy "${set}" 2>/dev/null
+			if [ $? -ne 0 ]; then
+				# Conflicting set is in use, we can only warn
+				# and flush the existing set
+				echo "ipset: Cannot load set \"${set}\", set with same name and conflicting type in use" >&2
+				${IPSET_BIN} flush "${set}"
+				${IPSET_BIN} destroy "${mangled}"
+			else
+				${IPSET_BIN} rename "${mangled}" "${set}"
+			fi
+		else
+			${IPSET_BIN} destroy "${mangled}"
+		fi
+	done
+	unset IFS
+
+	rm ${merged}
+	CLEAN_FILES="${CLEAN_FILES%* ${merged}}"
+	touch ${IPSET_RUN}
+}
+
+cleanup() {
+	${IPSET_BIN} flush || echo "ipset: Failed to flush sets" >&2
+
+	# Try to destroy all sets at once. This will fail if some are in use,
+	# destroy all the other ones in that case
+	${IPSET_BIN} destroy 2>/dev/null && return
+	IFS="
+"
+	for set in $(${IPSET_BIN} list -n -t); do
+		${IPSET_BIN} destroy "${set}" 2>/dev/null
+	done
+	unset IFS
+}
+
+stop() {
+	[ -f ${IPSET_RUN} ] || { echo "ipset: not running"; return 0; }
+	[ "${IPSET_SAVE_ON_STOP}" = "yes" ] && { save || echo "ipset: Failed to save sets"; }
+
+	# Nothing to stop if the ip_set module is not loaded
+	lsmod | grep -q "^ip_set " || { echo "ipset: not running"; rm ${IPSET_RUN}; return 0; }
+
+	# If the xt_set module is in use, then iptables is using ipset, so
+	# refuse to stop the service
+	mod="$(lsmod | grep ^xt_set)"
+	if [ $? -eq 0 ]; then
+		if [ "$(echo ${mod} | tr -s ' ' | cut -d' ' -f3)" != "0" ]; then
+			echo "ipset: Current iptables configuration requires ipset" >&2 && return 1
+		fi
+	fi
+
+	cleanup
+
+	rm ${IPSET_RUN}
+	return 0
+}
+
+lock
+case "$1" in
+start)
+	load
+	;;
+stop)
+	stop
+	;;
+reload)
+	cleanup
+	load
+	;;
+save)
+	save
+	;;
+*)
+	echo "Usage: $0 {start|stop|reload|save}" >&2
+	exit 1
+esac
+
+exit $?
diff --git a/SPECS/ipset.spec b/SPECS/ipset.spec
new file mode 100644
index 0000000..8d13bb1
--- /dev/null
+++ b/SPECS/ipset.spec
@@ -0,0 +1,291 @@
+# service legacy actions
+%define legacy_actions %{_libexecdir}/initscripts/legacy-actions
+
+Name:             ipset
+Version:          6.38
+Release:          3%{?dist}
+Summary:          Manage Linux IP sets
+
+License:          GPLv2
+URL:              http://ipset.netfilter.org/
+Source0:          http://ipset.netfilter.org/%{name}-%{version}.tar.bz2
+Source1:          %{name}.service
+Source2:          %{name}.start-stop
+Source3:          %{name}-config
+Source4:          %{name}.save-legacy
+
+BuildRequires:    libmnl-devel
+
+# An explicit requirement is needed here, to avoid cases where a user would
+# explicitly update only one of the two (e.g 'yum update ipset')
+Requires:         %{name}-libs%{?_isa} = %{version}-%{release}
+
+%description
+IP sets are a framework inside the Linux kernel since version 2.4.x, which can
+be administered by the ipset utility. Depending on the type, currently an IP
+set may store IP addresses, (TCP/UDP) port numbers or IP addresses with MAC
+addresses in a way, which ensures lightning speed when matching an entry
+against a set.
+
+If you want to:
+ - store multiple IP addresses or port numbers and match against the collection
+   by iptables at one swoop;
+ - dynamically update iptables rules against IP addresses or ports without
+   performance penalty;
+ - express complex IP address and ports based rulesets with one single iptables
+   rule and benefit from the speed of IP sets
+then ipset may be the proper tool for you.
+
+
+%package libs
+Summary:       Shared library providing the IP sets functionality
+
+%description libs
+This package contains the libraries which provide the IP sets funcionality.
+
+
+%package devel
+Summary:       Development files for %{name}
+Requires:      %{name}-libs%{?_isa} == %{version}-%{release}
+
+%description devel
+This package contains the files required to develop software using the %{name}
+libraries.
+
+
+%package service
+Summary:          %{name} service for %{name}s
+Requires:         %{name} = %{version}-%{release}
+BuildRequires:    systemd
+Requires:         iptables-services
+Requires(post):   systemd
+Requires(preun):  systemd
+Requires(postun): systemd
+BuildArch:        noarch
+
+%description service
+This package provides the service %{name} that is split
+out of the base package since it is not active by default.
+
+
+%prep
+%setup -q
+
+
+%build
+%configure --enable-static=no --with-kmod=no
+
+# Just to make absolutely sure we are not building the bundled kernel module
+# I have to do it after the configure run unfortunately
+rm -fr kernel
+
+# Prevent libtool from defining rpath
+sed -i 's|^hardcode_libdir_flag_spec=.*|hardcode_libdir_flag_spec=""|g' libtool
+sed -i 's|^runpath_var=LD_RUN_PATH|runpath_var=DIE_RPATH_DIE|g' libtool
+
+make %{?_smp_mflags}
+
+
+%install
+make install DESTDIR=%{buildroot}
+find %{buildroot} -name '*.la' -exec rm -f '{}' \;
+
+# install systemd unit file
+install -d -m 755 %{buildroot}/%{_unitdir}
+install -c -m 644 %{SOURCE1} %{buildroot}/%{_unitdir}
+
+# install supporting script
+install -d -m 755 %{buildroot}%{_libexecdir}/%{name}
+install -c -m 755 %{SOURCE2} %{buildroot}%{_libexecdir}/%{name}
+
+# install ipset-config
+install -d -m 755 %{buildroot}%{_sysconfdir}/sysconfig
+install -c -m 600 %{SOURCE3} %{buildroot}%{_sysconfdir}/sysconfig/%{name}-config
+
+# install legacy actions for service command
+install -d %{buildroot}/%{legacy_actions}/ipset
+install -c -m 755 %{SOURCE4} %{buildroot}/%{legacy_actions}/ipset/save
+
+# Create directory for configuration
+mkdir -p %{buildroot}%{_sysconfdir}/%{name}
+
+
+%preun
+if [[ $1 -eq 0 && -n $(lsmod | grep "^xt_set ") ]]; then
+    rmmod xt_set 2>/dev/null
+    [[ $? -ne 0 ]] && echo Current iptables configuration requires ipsets && exit 1
+fi
+
+
+%post libs -p /sbin/ldconfig
+
+%postun libs -p /sbin/ldconfig
+
+
+%post service
+%systemd_post %{name}.service
+
+%preun service
+if [[ $1 -eq 0 && -n $(lsmod | grep "^xt_set ") ]]; then
+    rmmod xt_set 2>/dev/null
+    [[ $? -ne 0 ]] && echo Current iptables configuration requires ipsets && exit 1
+fi
+%systemd_preun %{name}.service
+
+%postun service
+%systemd_postun_with_restart %{name}.service
+
+%triggerin service -- ipset-service < 6.38-1.el7
+# Before 6.38-1, ipset.start-stop keeps a backup of previously saved sets, but
+# doesn't touch the /etc/sysconfig/ipset.d/.saved flag. Remove the backup on
+# upgrade, so that we use the current version of saved sets
+rm -f /etc/sysconfig/ipset.save || :
+exit 0
+
+%triggerun service -- ipset-service < 6.38-1.el7
+# Up to 6.29-1, ipset.start-stop uses a single data file
+for f in /etc/sysconfig/ipset.d/*; do
+    [ "${f}" = "/etc/sysconfig/ipset.d/*" ] && break
+    cat ${f} >> /etc/sysconfig/ipset || :
+done
+exit 0
+
+%files
+%doc COPYING ChangeLog
+%doc %{_mandir}/man8/%{name}.8.gz
+%{_sbindir}/%{name}
+
+%files libs
+%doc COPYING
+%{_libdir}/lib%{name}.so.11*
+
+%files devel
+%{_includedir}/lib%{name}
+%{_libdir}/lib%{name}.so
+%{_libdir}/pkgconfig/lib%{name}.pc
+
+%files service
+%{_unitdir}/%{name}.service
+%dir %{_libexecdir}/%{name}
+%config(noreplace) %attr(0600,root,root) %{_sysconfdir}/sysconfig/ipset-config
+%ghost %config(noreplace) %attr(0600,root,root) %{_sysconfdir}/sysconfig/ipset
+%attr(0755,root,root) %{_libexecdir}/%{name}/%{name}.start-stop
+%dir %{legacy_actions}/ipset
+%{legacy_actions}/ipset/save
+
+
+%changelog
+* Tue Nov 13 2018 Stefano Brivio <sbrivio@redhat.com> - 6.38-3
+- Fix loading of sets with dependencies on other sets (RHBZ#1647096), and
+  hardcode 6.38-1.el7 for ipset-service upgrade and downgrade triggers, so that
+  we don't run into issues with z-stream updates
+
+* Mon Oct 08 2018 Stefano Brivio <sbrivio@redhat.com> - 6.38-2
+- Drop ipset-devel dependency on kernel-devel (RHBZ#163175)
+
+* Tue Aug 14 2018 Stefano Brivio <sbrivio@redhat.com> - 6.38-1
+- Update to 6.38, source from RHEL7 6.38-2 (RHBZ#1615967)
+
+* Mon Feb 12 2018 Eric Garver <egarver@redhat.com> - 6.35-3
+- Patch for missing header file (RHBZ#1543596)
+
+* Wed Feb 07 2018 Fedora Release Engineering <releng@fedoraproject.org> - 6.35-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild
+
+* Mon Jan 08 2018 Nicolas Chauvet <kwizart@gmail.com> - 6.35-1
+- Update to 6.35
+
+* Mon Jul 31 2017 Nicolas Chauvet <kwizart@gmail.com> - 6.32-1
+- Update to 6.32
+
+* Wed Jul 26 2017 Fedora Release Engineering <releng@fedoraproject.org> - 6.29-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
+
+* Fri Apr 07 2017 Nicolas Chauvet <kwizart@gmail.com> - 6.29-3
+- Userspace needs kernel-headers - rhbz#1420864
+
+* Fri Feb 10 2017 Fedora Release Engineering <releng@fedoraproject.org> - 6.29-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild
+
+* Mon Apr 18 2016 Thomas Woerner <twoerner@redhat.com> - 6.29-1
+- New upstream version 6.29 (RHBZ#1317208)
+  - Suppress unnecessary stderr in command loop for resize and list
+  - Correction in comment test
+  - Support chroot buildroots (reported by Jan Engelhardt)
+  - Fix "configure" breakage due to pkg-config related changes
+    (reported by Jan Engelhardt)
+  - Support older pkg-config packages
+  - Add bash completion to the install routine (Mart Frauenlob)
+  - Fix misleading error message with comment extension
+  - Test added to check 0.0.0.0/0,iface to be matched in hash:net,iface type
+  - Fix link with libtool >= 2.4.4 (Olivier Blin)
+
+* Thu Feb 04 2016 Fedora Release Engineering <releng@fedoraproject.org> - 6.27-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
+
+* Tue Nov 10 2015 Thomas Woerner <twoerner@redhat.com> - 6.27-1
+- New upstream version 6.27 (RHBZ#1145913)
+
+* Sat Oct 10 2015 Haïkel Guémar <hguemar@fedoraproject.org> - 6.26-1
+- Upstream 6.26 (RHBZ#1145913)
+
+* Wed Jun 17 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 6.22-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
+
+* Thu Sep 18 2014 Mathieu Bridon <bochecha@fedoraproject.org> - 6.22-1
+- New upstream release.
+
+* Sat Aug 16 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 6.21.1-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild
+
+* Sat Jun 07 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 6.21.1-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
+
+* Tue Mar 11 2014 Mathieu Bridon <bochecha@fedoraproject.org> - 6.21.1-2
+- Remove runtime requirement on the kernel.
+  https://lists.fedoraproject.org/pipermail/devel/2014-March/196565.html
+
+* Tue Oct 29 2013 Mathieu Bridon <bochecha@fedoraproject.org> - 6.20.1-1
+- New upstream release.
+
+* Tue Aug 27 2013 Quentin Armitage <quentin@armitage.org.uk> 6.19-2
+- Add service pkg - adds save and reload functionality on shutdown/startup
+- Add requires dependency of ipset on matching ipset-libs
+
+* Thu Aug 15 2013 Mathieu Bridon <bochecha@fedoraproject.org> - 6.19-1
+- New upstream release.
+
+* Sat Aug 03 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 6.16.1-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild
+
+* Thu Feb 14 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 6.16.1-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
+
+* Wed Sep 26 2012 Mathieu Bridon <bochecha@fedoraproject.org> - 6.16.1-1
+- New upstream release.
+- Fix a requirement.
+
+* Wed Sep 26 2012 Mathieu Bridon <bochecha@fedoraproject.org> - 6.14-1
+- New upstream release.
+- Fix scriptlets, ldconfig is needed for the libs subpackage, not the main one.
+
+* Mon Jul 30 2012 Mathieu Bridon <bochecha@fedoraproject.org> - 6.13-1
+- New upstream release.
+- Split out the library in its own subpackage.
+
+* Thu Jul 19 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 6.11-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
+
+* Mon Feb 06 2012 Mathieu Bridon <bochecha@fedoraproject.org> - 6.11-1
+- New upstream release.
+- Removed our patch, it has been integrated upstream. As such, we also don't
+  need to re-run autoreconf any more.
+
+* Fri Jan 13 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 6.9.1-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
+
+* Fri Sep 16 2011 Mathieu Bridon <bochecha@fedoraproject.org> - 6.9.1-2
+- Some fixes based on Pierre-Yves' review feedback.
+
+* Wed Sep 14 2011 Mathieu Bridon <bochecha@fedoraproject.org> - 6.9.1-1
+- Initial packaging.