From 48f6929590157d9a1697e11c02441207afdc1bed Mon Sep 17 00:00:00 2001 From: Xavi Hernandez Date: Fri, 27 Mar 2020 23:56:15 +0100 Subject: [PATCH 362/362] write-behind: fix data corruption There was a bug in write-behind that allowed a previous completed write to overwrite the overlapping region of data from a future write. Suppose we want to send three writes (W1, W2 and W3). W1 and W2 are sequential, and W3 writes at the same offset of W2: W2.offset = W3.offset = W1.offset + W1.size Both W1 and W2 are sent in parallel. W3 is only sent after W2 completes. So W3 should *always* overwrite the overlapping part of W2. Suppose write-behind processes the requests from 2 concurrent threads: Thread 1 Thread 2 wb_enqueue_tempted(W1) /* W1 is assigned gen X */ wb_enqueue_tempted(W2) /* W2 is assigned gen X */ wb_process_queue() __wb_preprocess_winds() /* W1 and W2 are sequential and all * other requisites are met to merge * both requests. */ __wb_collapse_small_writes(W1, W2) __wb_fulfill_request(W2) __wb_pick_unwinds() -> W2 /* In this case, since the request is * already fulfilled, wb_inode->gen * is not updated. */ wb_do_unwinds() STACK_UNWIND(W2) /* The application has received the * result of W2, so it can send W3. */ wb_enqueue_tempted(W3) /* W3 is assigned gen X */ wb_process_queue() /* Here we have W1 (which contains * the conflicting W2) and W3 with * same gen, so they are interpreted * as concurrent writes that do not * conflict. */ __wb_pick_winds() -> W3 wb_do_winds() STACK_WIND(W3) wb_process_queue() /* Eventually W1 will be * ready to be sent */ __wb_pick_winds() -> W1 __wb_pick_unwinds() -> W1 /* Here wb_inode->gen is * incremented. */ wb_do_unwinds() STACK_UNWIND(W1) wb_do_winds() STACK_WIND(W1) So, as we can see, W3 is sent before W1, which shouldn't happen. The problem is that wb_inode->gen is only incremented for requests that have not been fulfilled but, after a merge, the request is marked as fulfilled even though it has not been sent to the brick. This allows that future requests are assigned to the same generation, which could be internally reordered. Solution: Increment wb_inode->gen before any unwind, even if it's for a fulfilled request. Special thanks to Stefan Ring for writing a reproducer that has been crucial to identify the issue. Upstream patch: > Upstream patch link: https://review.gluster.org/c/glusterfs/+/24263 > Change-Id: Id4ab0f294a09aca9a863ecaeef8856474662ab45 > Signed-off-by: Xavi Hernandez > Fixes: #884 Change-Id: Id4ab0f294a09aca9a863ecaeef8856474662ab45 Signed-off-by: Xavi Hernandez BUG: 1819059 Reviewed-on: https://code.engineering.redhat.com/gerrit/196250 Tested-by: RHGS Build Bot Reviewed-by: Sunil Kumar Heggodu Gopala Acharya --- tests/bugs/write-behind/issue-884.c | 267 +++++++++++++++++++++ tests/bugs/write-behind/issue-884.t | 40 +++ .../performance/write-behind/src/write-behind.c | 4 +- 3 files changed, 309 insertions(+), 2 deletions(-) create mode 100644 tests/bugs/write-behind/issue-884.c create mode 100755 tests/bugs/write-behind/issue-884.t diff --git a/tests/bugs/write-behind/issue-884.c b/tests/bugs/write-behind/issue-884.c new file mode 100644 index 0000000..e9c33b3 --- /dev/null +++ b/tests/bugs/write-behind/issue-884.c @@ -0,0 +1,267 @@ + +#define _GNU_SOURCE + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* Based on a reproducer by Stefan Ring. It seems to be quite sensible to any + * timing modification, so the code has been maintained as is, only with minor + * changes. */ + +struct glfs *glfs; + +pthread_mutex_t the_mutex = PTHREAD_MUTEX_INITIALIZER; +pthread_cond_t the_cond = PTHREAD_COND_INITIALIZER; + +typedef struct _my_aiocb { + int64_t size; + volatile int64_t seq; + int which; +} my_aiocb; + +typedef struct _worker_data { + my_aiocb cb; + struct iovec iov; + int64_t offset; +} worker_data; + +typedef struct { + worker_data wdata[2]; + + volatile unsigned busy; +} all_data_t; + +all_data_t all_data; + +static void +completion_fnc(struct glfs_fd *fd, ssize_t ret, struct glfs_stat *pre, + struct glfs_stat *post, void *arg) +{ + void *the_thread; + my_aiocb *cb = (my_aiocb *)arg; + long seq = cb->seq; + + assert(ret == cb->size); + + pthread_mutex_lock(&the_mutex); + pthread_cond_broadcast(&the_cond); + + all_data.busy &= ~(1 << cb->which); + cb->seq = -1; + + the_thread = (void *)pthread_self(); + printf("worker %d is done from thread %p, seq %ld!\n", cb->which, + the_thread, seq); + + pthread_mutex_unlock(&the_mutex); +} + +static void +init_wdata(worker_data *data, int which) +{ + data->cb.which = which; + data->cb.seq = -1; + + data->iov.iov_base = malloc(1024 * 1024); + memset(data->iov.iov_base, 6, + 1024 * 1024); /* tail part never overwritten */ +} + +static void +init() +{ + all_data.busy = 0; + + init_wdata(&all_data.wdata[0], 0); + init_wdata(&all_data.wdata[1], 1); +} + +static void +do_write(struct glfs_fd *fd, int content, int size, int64_t seq, + worker_data *wdata, const char *name) +{ + int ret; + + wdata->cb.size = size; + wdata->cb.seq = seq; + + if (content >= 0) + memset(wdata->iov.iov_base, content, size); + wdata->iov.iov_len = size; + + pthread_mutex_lock(&the_mutex); + printf("(%d) dispatching write \"%s\", offset %lx, len %x, seq %ld\n", + wdata->cb.which, name, (long)wdata->offset, size, (long)seq); + pthread_mutex_unlock(&the_mutex); + ret = glfs_pwritev_async(fd, &wdata->iov, 1, wdata->offset, 0, + completion_fnc, &wdata->cb); + assert(ret >= 0); +} + +#define IDLE 0 // both workers must be idle +#define ANY 1 // use any worker, other one may be busy + +int +get_worker(int waitfor, int64_t excl_seq) +{ + int which; + + pthread_mutex_lock(&the_mutex); + + while (waitfor == IDLE && (all_data.busy & 3) != 0 || + waitfor == ANY && + ((all_data.busy & 3) == 3 || + excl_seq >= 0 && (all_data.wdata[0].cb.seq == excl_seq || + all_data.wdata[1].cb.seq == excl_seq))) + pthread_cond_wait(&the_cond, &the_mutex); + + if (!(all_data.busy & 1)) + which = 0; + else + which = 1; + + all_data.busy |= (1 << which); + + pthread_mutex_unlock(&the_mutex); + + return which; +} + +static int +doit(struct glfs_fd *fd) +{ + int ret; + int64_t seq = 0; + int64_t offset = 0; // position in file, in blocks + int64_t base = 0x1000; // where to place the data, in blocks + + int async_mode = ANY; + + init(); + + for (;;) { + int which; + worker_data *wdata; + + // for growing to the first offset + for (;;) { + int gap = base + 0x42 - offset; + if (!gap) + break; + if (gap > 80) + gap = 80; + + which = get_worker(IDLE, -1); + wdata = &all_data.wdata[which]; + + wdata->offset = offset << 9; + do_write(fd, 0, gap << 9, seq++, wdata, "gap-filling"); + + offset += gap; + } + + // 8700 + which = get_worker(IDLE, -1); + wdata = &all_data.wdata[which]; + + wdata->offset = (base + 0x42) << 9; + do_write(fd, 1, 62 << 9, seq++, wdata, "!8700"); + + // 8701 + which = get_worker(IDLE, -1); + wdata = &all_data.wdata[which]; + + wdata->offset = (base + 0x42) << 9; + do_write(fd, 2, 55 << 9, seq++, wdata, "!8701"); + + // 8702 + which = get_worker(async_mode, -1); + wdata = &all_data.wdata[which]; + + wdata->offset = (base + 0x79) << 9; + do_write(fd, 3, 54 << 9, seq++, wdata, "!8702"); + + // 8703 + which = get_worker(async_mode, -1); + wdata = &all_data.wdata[which]; + + wdata->offset = (base + 0xaf) << 9; + do_write(fd, 4, 81 << 9, seq++, wdata, "!8703"); + + // 8704 + // this writes both 5s and 6s + // the range of 5s is the one that overwrites 8703 + + which = get_worker(async_mode, seq - 1); + wdata = &all_data.wdata[which]; + + memset(wdata->iov.iov_base, 5, 81 << 9); + wdata->offset = (base + 0xaf) << 9; + do_write(fd, -1, 1623 << 9, seq++, wdata, "!8704"); + + offset = base + 0x706; + base += 0x1000; + if (base >= 0x100000) + break; + } + + printf("done!\n"); + fflush(stdout); + + pthread_mutex_lock(&the_mutex); + + while ((all_data.busy & 3) != 0) + pthread_cond_wait(&the_cond, &the_mutex); + + pthread_mutex_unlock(&the_mutex); + + ret = glfs_close(fd); + assert(ret >= 0); + /* + ret = glfs_fini(glfs); + assert(ret >= 0); + */ + return 0; +} + +int +main(int argc, char *argv[]) +{ + int ret; + int open_flags = O_RDWR | O_DIRECT | O_TRUNC; + struct glfs_fd *fd; + + glfs = glfs_new(argv[1]); + if (!glfs) { + printf("glfs_new!\n"); + goto out; + } + ret = glfs_set_volfile_server(glfs, "tcp", "localhost", 24007); + if (ret < 0) { + printf("set_volfile!\n"); + goto out; + } + ret = glfs_init(glfs); + if (ret) { + printf("init!\n"); + goto out; + } + fd = glfs_open(glfs, argv[2], open_flags); + if (!fd) { + printf("open!\n"); + goto out; + } + srand(time(NULL)); + return doit(fd); +out: + return 1; +} diff --git a/tests/bugs/write-behind/issue-884.t b/tests/bugs/write-behind/issue-884.t new file mode 100755 index 0000000..2bcf7d1 --- /dev/null +++ b/tests/bugs/write-behind/issue-884.t @@ -0,0 +1,40 @@ +#!/bin/bash + +. $(dirname $0)/../../include.rc +. $(dirname $0)/../../volume.rc + +# This test tries to detect a race condition in write-behind. It's based on a +# reproducer written by Stefan Ring that is able to hit it sometimes. On my +# system, it happened around 10% of the runs. This means that if this bug +# appears again, this test will fail once every 10 runs. Most probably this +# failure will be hidden by the automatic test retry of the testing framework. +# +# Please, if this test fails, it needs to be analyzed in detail. + +function run() { + "${@}" >/dev/null +} + +cleanup + +TEST glusterd +TEST pidof glusterd + +TEST $CLI volume create $V0 $H0:$B0/$V0 +# This makes it easier to hit the issue +TEST $CLI volume set $V0 client-log-level TRACE +TEST $CLI volume start $V0 + +TEST $GFS --volfile-server=$H0 --volfile-id=$V0 $M0 + +build_tester $(dirname $0)/issue-884.c -lgfapi + +TEST touch $M0/testfile + +# This program generates a file of 535694336 bytes with a fixed pattern +TEST run $(dirname $0)/issue-884 $V0 testfile + +# This is the md5sum of the expected pattern without corruption +EXPECT "ad105f9349345a70fc697632cbb5eec8" echo "$(md5sum $B0/$V0/testfile | awk '{ print $1; }')" + +cleanup diff --git a/xlators/performance/write-behind/src/write-behind.c b/xlators/performance/write-behind/src/write-behind.c index 70e281a..90a0bcf 100644 --- a/xlators/performance/write-behind/src/write-behind.c +++ b/xlators/performance/write-behind/src/write-behind.c @@ -1284,14 +1284,14 @@ __wb_pick_unwinds(wb_inode_t *wb_inode, list_head_t *lies) wb_inode->window_current += req->orig_size; + wb_inode->gen++; + if (!req->ordering.fulfilled) { /* burden increased */ list_add_tail(&req->lie, &wb_inode->liability); req->ordering.lied = 1; - wb_inode->gen++; - uuid_utoa_r(req->gfid, gfid); gf_msg_debug(wb_inode->this->name, 0, "(unique=%" PRIu64 -- 1.8.3.1