From ea20e0a38c9f150d9e96076e04f4b77109e41663 Mon Sep 17 00:00:00 2001 From: Mohit Agrawal Date: Wed, 27 Sep 2017 11:37:28 +0530 Subject: [PATCH 091/128] extras: scripts to control CPU/MEMORY for any gluster daemon during runtime Problem: Sometime gluster daemons like glustershd can consume a lot of cpu and/ or memory if there is a large amount of data/ entries to be healed. Solution: Until we have some form of throttling/ QoS mechanisms built into gluster, we can use control groups for regulating cpu and memory of any gluster daemon using control-cpu-load.sh and control-mem.sh scripts respectively. Test: To test the control-cpu-load.sh script follow below procedure: 1) Setup distribute replica environment 2) Selfheal daemon off 3) Down one node from replica nodes 4) Create millions of files from mount point 5) Start down node 6) Check cpu usage for shd process in top command 7) Run script after provide shd pid with CPU quota value 8) Check again cpu usage for shd process in top command Note: control-mem.sh script can cap the memory usage of the process to the set limit, beyond which the process gets blocked. It resumes either when the memory usage comes down or if the limit is increased. > BUG: 1496335 > Change-Id: Id73c36b73ca600fa9f7905d84053d1e8633c996f > Reviewed on https://review.gluster.org/#/c/18404 > (cherry picked from commit 2c066c4c365e77421d1009851144efae0b028628 BUG: 1484446 Change-Id: Id73c36b73ca600fa9f7905d84053d1e8633c996f Signed-off-by: Mohit Agrawal Reviewed-on: https://code.engineering.redhat.com/gerrit/124875 Tested-by: RHGS Build Bot Reviewed-by: Atin Mukherjee --- extras/Makefile.am | 6 ++- extras/control-cpu-load.sh | 116 ++++++++++++++++++++++++++++++++++++++++ extras/control-mem.sh | 128 +++++++++++++++++++++++++++++++++++++++++++++ glusterfs.spec.in | 5 ++ 4 files changed, 254 insertions(+), 1 deletion(-) create mode 100755 extras/control-cpu-load.sh create mode 100755 extras/control-mem.sh diff --git a/extras/Makefile.am b/extras/Makefile.am index 2812a4c..d9572ac 100644 --- a/extras/Makefile.am +++ b/extras/Makefile.am @@ -19,6 +19,10 @@ vol_DATA = glusterd.vol scriptsdir = $(datadir)/glusterfs/scripts scripts_SCRIPTS = post-upgrade-script-for-quota.sh \ pre-upgrade-script-for-quota.sh stop-all-gluster-processes.sh +if USE_SYSTEMD +scripts_SCRIPTS += control-cpu-load.sh +scripts_SCRIPTS += control-mem.sh +endif EXTRA_DIST = $(conf_DATA) specgen.scm glusterfs-mode.el glusterfs.vim \ migrate-unify-to-distribute.sh backend-xattr-sanitize.sh backend-cleanup.sh \ @@ -26,7 +30,7 @@ EXTRA_DIST = $(conf_DATA) specgen.scm glusterfs-mode.el glusterfs.vim \ post-upgrade-script-for-quota.sh pre-upgrade-script-for-quota.sh \ command-completion/gluster.bash command-completion/Makefile \ command-completion/README stop-all-gluster-processes.sh clang-checker.sh \ - mount-shared-storage.sh + mount-shared-storage.sh control-cpu-load.sh control-mem.sh install-data-local: if [ -n "$(tmpfilesdir)" ]; then \ diff --git a/extras/control-cpu-load.sh b/extras/control-cpu-load.sh new file mode 100755 index 0000000..b739c82 --- /dev/null +++ b/extras/control-cpu-load.sh @@ -0,0 +1,116 @@ +#!/bin/bash + +USAGE="This script provides a utility to control CPU utilization for any +gluster daemon.In this, we use cgroup framework to configure CPU quota +for a process(like selfheal daemon). Before running this script, make +sure that daemon is running.Every time daemon restarts, it is required +to rerun this command to set CPU quota on new daemon process id. +User can enter any value between 10 to 100 for CPU quota. +Recommended value of quota period is 25. 25 means, kernel will allocate +25 ms period to this group of tasks in every 100 ms period. This 25ms +could be considered as the maximum percentage of CPU quota daemon can take. +This value will be reflected on CPU usage of "top" command.If provided pid +is the only process and no other process is in competition to get CPU, more + than 25% could be allocated to daemon to speed up the process." + +if [ $# -ge 1 ]; then + case $1 in + -h|--help) echo " " "$USAGE" | sed -r -e 's/^[ ]+//g' + exit 0; + ;; + *) echo "Please Provide correct input for script." + echo "For help correct options are -h or --help." + exit 1; + ;; + esac +fi + +DIR_EXIST=0 +LOC="/sys/fs/cgroup/cpu,cpuacct/system.slice/glusterd.service" +echo "Enter gluster daemon pid for which you want to control CPU." +read daemon_pid + +if expr ${daemon_pid} + 0 > /dev/null 2>&1 ;then + CHECK_PID=$(pgrep -f gluster | grep ${daemon_pid}) + if [ -z "${CHECK_PID}" ]; then + echo "No daemon is running or pid ${daemon_pid} does not match." + echo "with running gluster processes." + exit 1 + fi +else + echo "Entered daemon_pid is not numeric so Rerun the script." + exit 1 +fi + + +if [ -f ${LOC}/tasks ];then + CHECK_CGROUP=$(grep ${daemon_pid} ${LOC}/tasks) + if [ ${CHECK_CGROUP} ]; then + echo "pid ${daemon_pid} is attached with glusterd.service cgroup." + fi +fi + +cgroup_name=cgroup_gluster_${daemon_pid} +if [ -f ${LOC}/${cgroup_name}/tasks ]; then + CHECK_CGROUP=$(grep ${daemon_pid} ${LOC}/${cgroup_name}/tasks) + if [ ${CHECK_CGROUP} ]; then + val=`cat ${LOC}/${cgroup_name}/cpu.cfs_quota_us` + qval=$((val / 1000)) + echo "pid ${daemon_pid} is already attached ${cgroup_name} with quota value ${qval}." + echo "Press n if you don't want to reassign ${daemon_pid} with new quota value." + DIR_EXIST=1 + else + echo "pid ${daemon_pid} is not attached with ${cgroup_name}." + fi +fi + +read -p "If you want to continue the script to attach ${daemon_pid} with new ${cgroup_name} cgroup Press (y/n)?" choice +case "$choice" in + y|Y ) echo "yes";; + n|N ) echo "no";exit;; + * ) echo "invalid";exit;; +esac + +systemctl set-property glusterd.service CPUShares=1024 + +if [ ${DIR_EXIST} -eq 0 ];then + echo "Creating child cgroup directory '${cgroup_name} cgroup' for glusterd.service." + mkdir -p ${LOC}/${cgroup_name} + if [ ! -f ${LOC}/${cgroup_name}/tasks ];then + echo "Not able to create ${cgroup_name} directory so exit." + exit 1 + fi +fi + +echo "Enter quota value in range [10,100]: " + +read quota_value +if expr ${quota_value} + 0 > /dev/null 2>&1 ;then + if [ ${quota_value} -lt 10 ] || [ ${quota_value} -gt 100 ]; then + echo "Entered quota value is not correct,it should be in the range ." + echo "10-100. Ideal value is 25." + echo "Rerun the sript with correct value." + exit 1 + else + echo "Entered quota value is $quota_value" + fi +else + echo "Entered quota value is not numeric so Rerun the script." + exit 1 +fi + +quota_value=$((quota_value * 1000)) +echo "Setting $quota_value to cpu.cfs_quota_us for gluster_cgroup." +echo ${quota_value} > ${LOC}/${cgroup_name}/cpu.cfs_quota_us + +if ps -T -p ${daemon_pid} | grep gluster > /dev/null; then + for thid in `ps -T -p ${daemon_pid} | grep gluster | awk -F " " '{print $2}'`; + do + echo ${thid} > ${LOC}/${cgroup_name}/tasks ; + done + if cat /proc/${daemon_pid}/cgroup | grep -w ${cgroup_name} > /dev/null; then + echo "Tasks are attached successfully specific to ${daemon_pid} to ${cgroup_name}." + else + echo "Tasks are not attached successfully." + fi +fi diff --git a/extras/control-mem.sh b/extras/control-mem.sh new file mode 100755 index 0000000..38aa2a0 --- /dev/null +++ b/extras/control-mem.sh @@ -0,0 +1,128 @@ +#!/bin/bash + +USAGE="This commands provides a utility to control MEMORY utilization for any +gluster daemon.In this, we use cgroup framework to configure MEMORY limit for +a process. Before running this script, make sure that daemon is running.Every +time daemon restarts, it is required to rerun this command to set memory limit +(in bytes) on new daemon process id.User can enter any value between 100 +(in Mega bytes) to 8000000000000 for Memory limit in Mega bytes. +Memory limit value is depends on how much maximum memory user wants to restrict +for specific daemon process.If a process will try to consume memore more than +configured value then cgroup will hang/sleep this task and to resume the task +rerun the script with new increase memory limit value ." + +if [ $# -ge 1 ]; then + case $1 in + -h|--help) echo " " "$USAGE" | sed -r -e 's/^[ ]+//g' + exit 0; + ;; + *) echo "Please Provide correct input for script." + echo "For help correct options are -h of --help." + exit 1; + ;; + esac +fi + +DIR_EXIST=0 +LOC="/sys/fs/cgroup/memory/system.slice/glusterd.service" +echo "Enter Any gluster daemon pid for that you want to control MEMORY." +read daemon_pid + +if expr ${daemon_pid} + 0 > /dev/null 2>&1 ;then + CHECK_PID=$(pgrep -f gluster | grep ${daemon_pid}) + if [ -z "${CHECK_PID}" ]; then + echo "No daemon is running or pid ${daemon_pid} does not match." + echo "with running gluster processes." + exit 1 + fi +else + echo "Entered daemon_pid is not numeric so Rerun the script." + exit 1 +fi + + +if [ -f ${LOC}/tasks ]; then + CHECK_CGROUP=$(grep ${daemon_pid} ${LOC}/tasks) + if [ ${CHECK_CGROUP} ] ;then + echo "pid ${daemon_pid} is attached with default glusterd.service cgroup." + fi +fi + +cgroup_name=cgroup_gluster_${daemon_pid} +if [ -f ${LOC}/${cgroup_name}/tasks ];then + CHECK_CGROUP=$(grep ${daemon_pid} ${LOC}/${cgroup_name}/tasks) + if [ ${CHECK_CGROUP} ]; then + val=`cat ${LOC}/${cgroup_name}/memory.limit_in_bytes` + mval=$((val / 1024 / 1024)) + echo "pid ${daemon_pid} is already attached ${cgroup_name} with mem value ${mval}." + echo "Press n if you don't want to reassign ${daemon_pid} with new mem value." + DIR_EXIST=1 + else + echo "pid ${daemon_pid} is not attached with ${cgroup_name}." + fi +fi + +read -p "If you want to continue the script to attach daeomon with new cgroup. Press (y/n)?" choice +case "$choice" in + y|Y ) echo "yes";; + n|N ) echo "no";exit;; + * ) echo "invalid";exit;; +esac + +systemctl set-property glusterd.service CPUShares=1024 + +if [ ${DIR_EXIST} -eq 0 ];then + echo "Creating child cgroup directory '${cgroup_name} cgroup' for glusterd.service." + mkdir -p ${LOC}/${cgroup_name} + if [ ! -f ${LOC}/${cgroup_name}/tasks ];then + echo "Not able to create ${LOC}/${cgroup_name} directory so exit." + exit 1 + fi +fi + +echo "Enter Memory value in Mega bytes [100,8000000000000]: " + +read mem_value +if expr ${mem_value} + 0 > /dev/null 2>&1 ;then + if [ ${mem_value} -lt 100 ] || [ ${mem_value} -gt 8000000000000 ]; then + echo "Entered memory value is not correct,it should be in the range ." + echo "100-8000000000000, Rerun the script with correct value ." + exit 1 + else + echo "Entered memory limit value is ${mem_value}." + fi +else + echo "Entered memory value is not numeric so Rerun the script." + exit 1 +fi + +mem_value=$(($mem_value * 1024 * 1024)) +if [ ${DIR_EXIST} -eq 0 ];then + echo "Setting ${mem_value} to memory.limit_in_bytes for ${LOC}/${cgroup_name}." + echo ${mem_value} > ${LOC}/${cgroup_name}/memory.limit_in_bytes + #Set memory value to memory.memsw.limit_in_bytes + echo ${mem_value} > ${LOC}/${cgroup_name}/memory.memsw.limit_in_bytes + # disable oom_control so that kernel will not send kill signal to the + # task once limit has reached + echo 1 > ${LOC}/${cgroup_name}/memory.oom_control +else + #Increase mem_value to memory.memsw.limit_in_bytes + echo ${mem_value} > ${LOC}/${cgroup_name}/memory.memsw.limit_in_bytes + echo "Increase ${mem_value} to memory.limit_in_bytes for ${LOC}/${cgroup_name}." + echo ${mem_value} > ${LOC}/${cgroup_name}/memory.limit_in_bytes + # disable oom_control so that kernel will not send kill signal to the + # task once limit has reached + echo 1 > ${LOC}/${cgroup_name}/memory.oom_control +fi + +if ps -T -p ${daemon_pid} | grep gluster > /dev/null; then + for thid in `ps -T -p ${daemon_pid} | grep gluster | awk -F " " '{print $2}'`; + do + echo ${thid} > ${LOC}/${cgroup_name}/tasks ; + done + if cat /proc/${daemon_pid}/cgroup | grep -iw ${cgroup_name} > /dev/null; then + echo "Tasks are attached successfully specific to ${daemon_pid} to ${cgroup_name}." + else + echo "Tasks are not attached successfully." + fi +fi diff --git a/glusterfs.spec.in b/glusterfs.spec.in index da8a3e5..56a62a9 100644 --- a/glusterfs.spec.in +++ b/glusterfs.spec.in @@ -1553,6 +1553,8 @@ exit 0 %{_datadir}/glusterfs/scripts/stop-all-gluster-processes.sh %if ( 0%{?_with_systemd:1} ) %{_libexecdir}/glusterfs/mount-shared-storage.sh + %{_datadir}/glusterfs/scripts/control-cpu-load.sh + %{_datadir}/glusterfs/scripts/control-mem.sh %endif # Incrementalapi @@ -2178,6 +2180,9 @@ fi %endif %changelog +* Fri Dec 01 2017 Mohit Agrawal +- Added control-cpu-load.sh and control-mem.sh scripts to glusterfs-server section(#1484446) + * Mon Nov 13 2017 Jiffin Tony Thottan - Adding ganesha bits back in gluster repository #1499784 -- 1.8.3.1