diff -urNp old/man/freeipmi.7.pre.in new/man/freeipmi.7.pre.in
--- old/man/freeipmi.7.pre.in	2017-08-29 14:01:35.453296600 +0200
+++ new/man/freeipmi.7.pre.in	2017-11-20 08:37:57.192003912 +0100
@@ -87,20 +87,20 @@ found in each of the tool manpages.
 The primary tools that most users of FreeIPMI will be interested in
 for system management are the following:
 .PP
-.B Ipmi-sensors
+.B ipmi-sensors
 .PP
 A tool to read IPMI sensor readings to aid in system monitoring.
 .PP
-.B Ipmi-sel
+.B ipmi-sel
 .PP
 A tool to read and manage IPMI System Event Log (SEL) records to aid
 in system debugging.
 .PP
-.B Ipmipower
+.B ipmipower
 .PP
 A tool for remote power control.
 .PP
-.B Ipmiconsole
+.B ipmiconsole
 .PP
 A tool for Serial-over-Lan (SOL) console access.
 .PP
@@ -121,7 +121,7 @@ for more information.
 
 .SH "HPC Support"
 Much of FreeIPMI was written with HPC support in mind.  
-.B Ipmi-config(8)
+.B ipmi-config(8)
 comes with file input/output support so that configuration can be
 copied and verified across nodes in a cluster.  Most tools (like
 .B ipmipower(8) 
@@ -133,7 +133,7 @@ the hosts in parallel.  See tool manpage
 Also see the document 
 \fIfreeipmi-hostrange.txt\fR 
 for detailed usage and explanation.
-.B Ipmi-sensors(8)
+.B ipmi-sensors(8)
 and the
 .B libipmimonitoring(3)
 library support the ability to interpret sensor readings as well as
@@ -155,47 +155,47 @@ Or see the document
 .SH "Project Tools"
 The following tools are distributed and supported by FreeIPMI.
 .PP
-.B Bmc-info
+.B bmc-info
 .PP
 A tool to read information about a BMC such as device version numbers,
 device support, and globally unique IDs (guids).
 .PP
-.B Bmc-watchdog
+.B bmc-watchdog
 .PP
 A tool/daemon to manage a BMC Watchdog. This tool is typically used
 for system timeout management and automatic system restarts in the
 event of a system crash.
 .PP
-.B Ipmi-chassis
+.B ipmi-chassis
 .PP
 A tool to manage/monitor a chassis, such as chassis power,
 identification (i.e. LED control), and status.
 .PP
-.B Ipmi-fru
+.B ipmi-fru
 .PP
 A tool to read field replaceable unit (FRU) information from a
 motherboard/machine.
 .PP
-.B Ipmi-sel
+.B ipmi-sel
 .PP
 A tool to read and manage IPMI System Event Log (SEL) records.  SEL
 records store system event information and may be useful for debugging
 problems.
 .PP
-.B Ipmi-sensors
+.B ipmi-sensors
 .PP
 A tool to read IPMI sensor readings and sensor data repository (SDR)
 information.
 .PP
-.B Ipmipower
+.B ipmipower
 .PP
 A tool for remote power control.
 .PP
-.B Ipmiconsole
+.B ipmiconsole
 .PP
 A tool for Serial-over-Lan (SOL) console access.
 .PP
-.B Ipmi-config
+.B ipmi-config
 .PP
 A tool to configure BMC and IPMI information.  In can be used to
 configured usernames, passwords, networking information, security,
@@ -203,48 +203,48 @@ Serial-over-LAN (SOL), Platform Event Fi
 power restoration policy, sensor thresholds, sensor events, and many
 more configuration options.
 .PP
-.B Ipmi-raw
+.B ipmi-raw
 .PP
 A tool that provides hex input/output of IPMI commands.
 .PP
-.B Ipmi-locate
+.B ipmi-locate
 .PP
 A tool that can probe for information about the location of a BMC
 device, such as device addresses.
 .PP
-.B Ipmi-pet
+.B ipmi-pet
 .PP
 A tool to parse and interpret Platform Event Traps (PET).
 .PP
-.B Ipmi-dcmi
+.B ipmi-dcmi
 .PP
 A tool to perform Data Center Manageability Interface (DCMI) IPMI
 extension commands.  Supports extensions for asset management and
 power usage management.
 .PP
-.B Bmc-device
+.B bmc-device
 .PP
 A tool to perform advanced BMC commands, such as resetting the BMC,
 configuring ACPI, configuring SDR/SEL time, manually generating
 events, re-arming sensors, and configuring manufacturer settings.
 .PP
-.B Ipmiping
+.B ipmiping
 .PP
 An IPMI ping tool for debugging.
 .PP
-.B Rmcpping
+.B rmcpping
 .PP
 A RMCP ping tool for debugging.
 .PP
-.B Ipmi-oem
+.B ipmi-oem
 .PP
 An IPMI tool for OEM specific commands.
 .PP
-.B Ipmidetect/Ipmidetectd
+.B ipmidetect/ipmidetectd
 .PP
 A tool and daemon for IPMI node detection.
 .PP
-.B Ipmiseld
+.B ipmiseld
 .PP
 A daemon that regularly polls the SEL and stores the events to the
 local syslog.
diff -urNp old/man/ipmi-sensors.8.pre.in new/man/ipmi-sensors.8.pre.in
--- old/man/ipmi-sensors.8.pre.in	2017-08-29 14:01:35.453296600 +0200
+++ new/man/ipmi-sensors.8.pre.in	2017-08-29 14:05:45.726670330 +0200
@@ -5,14 +5,14 @@ ipmi-sensors \- display IPMI sensor info
 .B ipmi-sensors
 [\fIOPTION\fR...]
 .SH "DESCRIPTION"
-.B Ipmi-sensors
+.B ipmi-sensors
 displays current readings of sensors and sensor data repository (SDR)
 information.  The default display outputs each sensor's record id,
 sensor name, sensor type name, sensor reading (if appropriate), and
 the current sensor event.  More verbose information can be found using
 the verbose options specified below.
 
-.B Ipmi-sensors
+.B ipmi-sensors
 does not inform the user if a problem exists with a particular sensor
 because sensor readings and events are not analyzed by default. Users
 may wish to use the \fB\-\-output\-sensor\-state\fR option to output
@@ -57,7 +57,7 @@ To perform some advanced SDR management,
 #include <@top_srcdir@/man/manpage-common-misc.man>
 .SH "IPMI-SENSORS OPTIONS"
 The following options are specific to
-.B Ipmi-sensors.
+.B ipmi-sensors.
 .TP
 \fB\-v\fR, \fB\-\-verbose\fR
 Output verbose sensor output.  This option will output additional