From bb89624c1a62de701f87d7deb669e40586c920d2 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Tue, 14 Sep 2021 14:27:34 +0300 Subject: [PATCH 01/35] sff-8636: Fix parsing of Page 03h in IOCTL path The offset of Page 03h compared to the base address of the Lower Memory is 512 bytes. However, all the offsets to the page start at address 128, which is the address that separates Lower and Upper memory (see Figure 6-1 in SFF-8636). Therefore, reading these offsets compared to the start of Page 03h results in incorrect memory accesses as can be seen in the output below. Instead, pass Page 03h with the correct offset. This is a temporary solution until SFF-8636 is refactored to use a memory map for parsing. Before patch: # ethtool -m swp13 ... Laser bias current high alarm threshold : 16.448 mA Laser bias current low alarm threshold : 16.500 mA Laser bias current high warning threshold : 16.480 mA Laser bias current low warning threshold : 61.538 mA Laser output power high alarm threshold : 1.2576 mW / 1.00 dBm Laser output power low alarm threshold : 1.0321 mW / 0.14 dBm Laser output power high warning threshold : 2.1318 mW / 3.29 dBm Laser output power low warning threshold : 2.0530 mW / 3.12 dBm Module temperature high alarm threshold : 0.00 degrees C / 32.00 degrees F Module temperature low alarm threshold : 0.00 degrees C / 32.00 degrees F Module temperature high warning threshold : 0.00 degrees C / 32.00 degrees F Module temperature low warning threshold : 0.00 degrees C / 32.00 degrees F Module voltage high alarm threshold : 0.2377 V Module voltage low alarm threshold : 2.5701 V Module voltage high warning threshold : 2.8276 V Module voltage low warning threshold : 2.6982 V Laser rx power high alarm threshold : 0.8224 mW / -0.85 dBm Laser rx power low alarm threshold : 0.8224 mW / -0.85 dBm Laser rx power high warning threshold : 0.8224 mW / -0.85 dBm Laser rx power low warning threshold : 0.8224 mW / -0.85 dBm After patch: # ethtool -m swp13 ... Laser bias current high alarm threshold : 8.500 mA Laser bias current low alarm threshold : 5.492 mA Laser bias current high warning threshold : 8.000 mA Laser bias current low warning threshold : 6.000 mA Laser output power high alarm threshold : 3.4673 mW / 5.40 dBm Laser output power low alarm threshold : 0.0724 mW / -11.40 dBm Laser output power high warning threshold : 1.7378 mW / 2.40 dBm Laser output power low warning threshold : 0.1445 mW / -8.40 dBm Module temperature high alarm threshold : 80.00 degrees C / 176.00 degrees F Module temperature low alarm threshold : -10.00 degrees C / 14.00 degrees F Module temperature high warning threshold : 70.00 degrees C / 158.00 degrees F Module temperature low warning threshold : 0.00 degrees C / 32.00 degrees F Module voltage high alarm threshold : 3.5000 V Module voltage low alarm threshold : 3.1000 V Module voltage high warning threshold : 3.4650 V Module voltage low warning threshold : 3.1350 V Laser rx power high alarm threshold : 3.4673 mW / 5.40 dBm Laser rx power low alarm threshold : 0.0467 mW / -13.31 dBm Laser rx power high warning threshold : 1.7378 mW / 2.40 dBm Laser rx power low warning threshold : 0.0933 mW / -10.30 dBm The following AddressSanitizer report is fixed: ==44670==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x617000000320 at pc 0x00000047ad93 bp 0x7ffcb4dc0070 sp 0x7ffcb4dc0068 READ of size 1 at 0x617000000320 thread T0 #0 0x47ad92 in sff8636_dom_parse qsfp.c:683 #1 0x47c5d6 in sff8636_show_dom qsfp.c:771 #2 0x47d21f in sff8636_show_all qsfp.c:870 #3 0x42130b in do_getmodule ethtool.c:4908 #4 0x42a38a in main ethtool.c:6383 #5 0x7f500bf421e1 in __libc_start_main (/lib64/libc.so.6+0x281e1) #6 0x40258d in _start (ethtool+0x40258d) 0x617000000320 is located 16 bytes to the right of 656-byte region [0x617000000080,0x617000000310) allocated by thread T0 here: #0 0x7f500c2d6527 in __interceptor_calloc (/lib64/libasan.so.6+0xab527) #1 0x420d8c in do_getmodule ethtool.c:4859 #2 0x42a38a in main ethtool.c:6383 #3 0x7f500bf421e1 in __libc_start_main (/lib64/libc.so.6+0x281e1) SUMMARY: AddressSanitizer: heap-buffer-overflow qsfp.c:683 in sff8636_dom_parse Fixes: fc47fdb7c364 ("ethtool: Refactor human-readable module EEPROM output for new API") Signed-off-by: Ido Schimmel --- qsfp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/qsfp.c b/qsfp.c index 644fe148a5aa..e84226bc1554 100644 --- a/qsfp.c +++ b/qsfp.c @@ -867,7 +867,7 @@ void sff8636_show_all(const __u8 *id, __u32 eeprom_len) (id[SFF8636_ID_OFFSET] == SFF8024_ID_QSFP_PLUS) || (id[SFF8636_ID_OFFSET] == SFF8024_ID_QSFP28)) { sff6836_show_page_zero(id); - sff8636_show_dom(id, id + SFF8636_PAGE03H_OFFSET, eeprom_len); + sff8636_show_dom(id, id + 3 * 0x80, eeprom_len); } } -- 2.35.1