diff --git a/1991-feat-dmsquash-live-add-new-dmsquash-live-autooverlay.patch b/1991-feat-dmsquash-live-add-new-dmsquash-live-autooverlay.patch new file mode 100644 index 0000000..e3c8b04 --- /dev/null +++ b/1991-feat-dmsquash-live-add-new-dmsquash-live-autooverlay.patch @@ -0,0 +1,400 @@ +From 732361736810166aeba87616c93206b3e252aabe Mon Sep 17 00:00:00 2001 +From: Matt Coleman +Date: Fri, 23 Sep 2022 19:28:25 -0400 +Subject: [PATCH] feat(dmsquash-live): add new dmsquash-live-autooverlay module + +(cherry picked from commit a3c67d27e75223bb45df19f850d246ced9a09938) +--- + man/dracut.cmdline.7.asc | 4 + + .../create-overlay-genrules.sh | 10 ++ + .../create-overlay.sh | 119 ++++++++++++++++++ + .../module-setup.sh | 25 ++++ + pkgbuild/dracut.spec | 3 +- + test/TEST-16-DMSQUASH/create-root.sh | 12 +- + test/TEST-16-DMSQUASH/test-init.sh | 6 + + test/TEST-16-DMSQUASH/test.sh | 38 +++++- + test/container/Dockerfile-Arch | 4 +- + test/container/Dockerfile-Debian | 1 + + test/container/Dockerfile-Fedora-latest | 1 + + test/container/Dockerfile-OpenSuse-latest | 2 +- + 12 files changed, 216 insertions(+), 9 deletions(-) + create mode 100755 modules.d/90dmsquash-live-autooverlay/create-overlay-genrules.sh + create mode 100755 modules.d/90dmsquash-live-autooverlay/create-overlay.sh + create mode 100755 modules.d/90dmsquash-live-autooverlay/module-setup.sh + +diff --git a/man/dracut.cmdline.7.asc b/man/dracut.cmdline.7.asc +index fda62fd1..40d13d83 100644 +--- a/man/dracut.cmdline.7.asc ++++ b/man/dracut.cmdline.7.asc +@@ -1161,6 +1161,10 @@ rd.live.overlay=/dev/sdb1:persistent-overlay.img + rd.live.overlay=UUID=99440c1f-8daa-41bf-b965-b7240a8996f4 + -- + ++**rd.live.overlay.cowfs=**__[btrfs|ext4|xfs]__:: ++Specifies the filesystem to use when formatting the overlay partition. ++The default is ext4. ++ + **rd.live.overlay.size=**____:: + Specifies a non-persistent Device-mapper overlay size in MiB. The default is + _32768_. +diff --git a/modules.d/90dmsquash-live-autooverlay/create-overlay-genrules.sh b/modules.d/90dmsquash-live-autooverlay/create-overlay-genrules.sh +new file mode 100755 +index 00000000..ed168d9f +--- /dev/null ++++ b/modules.d/90dmsquash-live-autooverlay/create-overlay-genrules.sh +@@ -0,0 +1,10 @@ ++#!/bin/sh ++ ++# shellcheck disable=SC2154 ++case "$root" in ++ live:/dev/*) ++ printf 'SYMLINK=="%s", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/create-overlay %s"\n' \ ++ "${root#live:/dev/}" "${root#live:}" >> /etc/udev/rules.d/95-create-overlay.rules ++ wait_for_dev -n "${root#live:}" ++ ;; ++esac +diff --git a/modules.d/90dmsquash-live-autooverlay/create-overlay.sh b/modules.d/90dmsquash-live-autooverlay/create-overlay.sh +new file mode 100755 +index 00000000..c89bda2b +--- /dev/null ++++ b/modules.d/90dmsquash-live-autooverlay/create-overlay.sh +@@ -0,0 +1,119 @@ ++#!/bin/sh ++ ++type getarg > /dev/null 2>&1 || . /lib/dracut-lib.sh ++ ++if getargbool 0 rd.live.debug -n -y rdlivedebug; then ++ exec > /tmp/create-overlay.$$.out ++ exec 2>> /tmp/create-overlay.$$.out ++ set -x ++fi ++ ++gatherData() { ++ overlay=$(getarg rd.live.overlay) ++ if [ -z "$overlay" ]; then ++ info "Skipping overlay creation: kernel command line parameter 'rd.live.overlay' is not set" ++ exit 0 ++ fi ++ # shellcheck disable=SC2086 ++ if ! str_starts ${overlay} LABEL=; then ++ die "Overlay creation failed: the partition must be set by LABEL in the 'rd.live.overlay' kernel parameter" ++ fi ++ ++ overlayLabel=${overlay#LABEL=} ++ # shellcheck disable=SC2086 ++ if [ -b /dev/disk/by-label/${overlayLabel} ]; then ++ info "Skipping overlay creation: overlay already exists" ++ exit 0 ++ fi ++ ++ filesystem=$(getarg rd.live.overlay.cowfs) ++ [ -z "$filesystem" ] && filesystem="ext4" ++ if [ "$filesystem" != "ext4" ] && [ "$filesystem" != "xfs" ] && [ "$filesystem" != "btrfs" ]; then ++ die "Overlay creation failed: only ext4, xfs, and btrfs are supported in the 'rd.live.overlay.cowfs' kernel parameter" ++ fi ++ ++ live_dir=$(getarg rd.live.dir) ++ [ -z "$live_dir" ] && live_dir="LiveOS" ++ ++ [ -z "$1" ] && exit 1 ++ rootDevice=$1 ++ ++ # The kernel command line's 'root=' parameter was parsed into the $root variable by the dmsquash-live module. ++ # $root contains the path to a symlink within /dev/disk/by-label, which points to a partition. ++ # This script needs that partition's parent block device. ++ # shellcheck disable=SC2046 ++ # shellcheck disable=SC2086 ++ rootDeviceAbsolutePath=$(readlink -f ${rootDevice}) ++ rootDeviceSysfsPath=/sys/class/block/${rootDeviceAbsolutePath##*/} ++ if [ -f "${rootDeviceSysfsPath}/partition" ]; then ++ # shellcheck disable=SC2086 ++ partition=$(cat ${rootDeviceSysfsPath}/partition) ++ else ++ partition=0 ++ fi ++ # shellcheck disable=SC2086 ++ readonly=$(cat ${rootDeviceSysfsPath}/ro) ++ # shellcheck disable=SC2086 ++ if [ "$partition" != "1" ] || [ "$readonly" != "0" ]; then ++ info "Skipping overlay creation: unpartitioned or read-only media detected" ++ exit 0 ++ fi ++ # shellcheck disable=SC2046 ++ # shellcheck disable=SC2086 ++ fullDriveSysfsPath=$(readlink -f ${rootDeviceSysfsPath}/..) ++ blockDevice=/dev/${fullDriveSysfsPath##*/} ++ currentPartitionCount=$(grep --count -E "${blockDevice#/dev/}[0-9]+" /proc/partitions) ++ ++ # shellcheck disable=SC2086 ++ freeSpaceStart=$(parted --script ${blockDevice} unit % print free \ ++ | awk -v x=${currentPartitionCount} '$1 == x {getline; print $1}') ++ if [ -z "$freeSpaceStart" ]; then ++ info "Skipping overlay creation: there is no free space after the last partition" ++ exit 0 ++ fi ++ partitionStart=$((${freeSpaceStart%.*} + 1)) ++ if [ $partitionStart -eq 100 ]; then ++ info "Skipping overlay creation: there is not enough free space after the last partition" ++ exit 0 ++ fi ++ ++ overlayPartition=${blockDevice}$((currentPartitionCount + 1)) ++ ++ label=$(blkid --match-tag LABEL --output value "$rootDevice") ++ uuid=$(blkid --match-tag UUID --output value "$rootDevice") ++ if [ -z "$label" ] || [ -z "$uuid" ]; then ++ die "Overlay creation failed: failed to look up root device label and UUID" ++ fi ++} ++ ++createPartition() { ++ # shellcheck disable=SC2086 ++ parted --script --align optimal ${blockDevice} mkpart primary ${partitionStart}% 100% ++} ++ ++createFilesystem() { ++ # shellcheck disable=SC2086 ++ mkfs.${filesystem} -L ${overlayLabel} ${overlayPartition} ++ ++ baseDir=/run/initramfs/create-overlayfs ++ mkdir -p ${baseDir} ++ # shellcheck disable=SC2086 ++ mount -t auto ${overlayPartition} ${baseDir} ++ ++ mkdir -p ${baseDir}/${live_dir}/ovlwork ++ # shellcheck disable=SC2086 ++ mkdir ${baseDir}/${live_dir}/overlay-${label}-${uuid} ++ ++ umount ${baseDir} ++ rm -r ${baseDir} ++} ++ ++main() { ++ gatherData "$1" ++ createPartition ++ udevsettle ++ createFilesystem ++ udevsettle ++} ++ ++main "$1" +diff --git a/modules.d/90dmsquash-live-autooverlay/module-setup.sh b/modules.d/90dmsquash-live-autooverlay/module-setup.sh +new file mode 100755 +index 00000000..c3712eba +--- /dev/null ++++ b/modules.d/90dmsquash-live-autooverlay/module-setup.sh +@@ -0,0 +1,25 @@ ++#!/bin/bash ++ ++check() { ++ # including a module dedicated to live environments in a host-only initrd doesn't make sense ++ [[ $hostonly ]] && return 1 ++ return 255 ++} ++ ++depends() { ++ echo dmsquash-live ++ return 0 ++} ++ ++installkernel() { ++ instmods btrfs ext4 xfs ++} ++ ++install() { ++ inst_multiple awk blkid cat grep mkdir mount parted readlink rmdir tr umount ++ inst_multiple -o mkfs.btrfs mkfs.ext4 mkfs.xfs ++ # shellcheck disable=SC2154 ++ inst_hook pre-udev 25 "$moddir/create-overlay-genrules.sh" ++ inst_script "$moddir/create-overlay.sh" "/sbin/create-overlay" ++ dracut_need_initqueue ++} +diff --git a/pkgbuild/dracut.spec b/pkgbuild/dracut.spec +index 71b7421c..0f3efda7 100644 +--- a/pkgbuild/dracut.spec ++++ b/pkgbuild/dracut.spec +@@ -141,7 +141,7 @@ Requires: %{name} >= %{version}-%{dist_free_release} + Requires: %{name} = %{version}-%{release} + %endif + Requires: %{name}-network = %{version}-%{release} +-Requires: tar gzip coreutils bash device-mapper curl ++Requires: tar gzip coreutils bash device-mapper curl parted + %if 0%{?fedora} + Requires: fuse ntfs-3g + %endif +@@ -464,6 +464,7 @@ echo 'dracut_rescue_image="yes"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/ + %files live + %{dracutlibdir}/modules.d/99img-lib + %{dracutlibdir}/modules.d/90dmsquash-live ++%{dracutlibdir}/modules.d/90dmsquash-live-autooverlay + %{dracutlibdir}/modules.d/90dmsquash-live-ntfs + %{dracutlibdir}/modules.d/90livenet + +diff --git a/test/TEST-16-DMSQUASH/create-root.sh b/test/TEST-16-DMSQUASH/create-root.sh +index 9bc1aa5d..c11e17e0 100755 +--- a/test/TEST-16-DMSQUASH/create-root.sh ++++ b/test/TEST-16-DMSQUASH/create-root.sh +@@ -11,9 +11,17 @@ udevadm control --reload + set -e + + udevadm settle +-mkfs.ext4 -q -L dracut /dev/disk/by-id/ata-disk_root ++ ++# create a single partition using 50% of the capacity of the image file created by test_setup() in test.sh ++sfdisk /dev/disk/by-id/ata-disk_root << EOF ++2048,161792 ++EOF ++ ++udevadm settle ++ ++mkfs.ext4 -q -L dracut /dev/disk/by-id/ata-disk_root-part1 + mkdir -p /root +-mount /dev/disk/by-id/ata-disk_root /root ++mount /dev/disk/by-id/ata-disk_root-part1 /root + mkdir -p /root/run /root/testdir + echo "Creating squashfs" + mksquashfs /source /root/testdir/rootfs.img -quiet +diff --git a/test/TEST-16-DMSQUASH/test-init.sh b/test/TEST-16-DMSQUASH/test-init.sh +index 068e8f38..959fa25f 100755 +--- a/test/TEST-16-DMSQUASH/test-init.sh ++++ b/test/TEST-16-DMSQUASH/test-init.sh +@@ -9,6 +9,12 @@ exec > /dev/console 2>&1 + + echo "dracut-root-block-success" | dd oflag=direct,dsync of=/dev/disk/by-id/ata-disk_marker + ++if grep -qF ' rd.live.overlay=LABEL=persist ' /proc/cmdline; then ++ # Writing to a file in the root filesystem lets test_run() verify that the autooverlay module successfully created ++ # and formatted the overlay partition and that the dmsquash-live module used it when setting up the rootfs overlay. ++ echo "dracut-autooverlay-success" > /overlay-marker ++fi ++ + export TERM=linux + export PS1='initramfs-test:\w\$ ' + [ -f /etc/mtab ] || ln -sfn /proc/mounts /etc/mtab +diff --git a/test/TEST-16-DMSQUASH/test.sh b/test/TEST-16-DMSQUASH/test.sh +index cf433489..a446b3c9 100755 +--- a/test/TEST-16-DMSQUASH/test.sh ++++ b/test/TEST-16-DMSQUASH/test.sh +@@ -5,8 +5,9 @@ TEST_DESCRIPTION="live root on a squash filesystem" + + KVERSION="${KVERSION-$(uname -r)}" + +-# Uncomment this to debug failures +-# DEBUGFAIL="rd.shell rd.debug loglevel=7" ++# Uncomment these to debug failures ++#DEBUGFAIL="rd.shell rd.debug rd.live.debug loglevel=7" ++#DEBUGTOOLS="setsid ls cat sfdisk" + + test_run() { + dd if=/dev/zero of="$TESTDIR"/marker.img bs=1MiB count=1 +@@ -23,6 +24,27 @@ test_run() { + -initrd "$TESTDIR"/initramfs.testing + + grep -U --binary-files=binary -F -m 1 -q dracut-root-block-success -- "$TESTDIR"/marker.img || return 1 ++ ++ rootPartitions=$(sfdisk -d "$TESTDIR"/root.img | grep -c 'root\.img[0-9]') ++ [ "$rootPartitions" -eq 1 ] || return 1 ++ ++ "$testdir"/run-qemu \ ++ "${disk_args[@]}" \ ++ -boot order=d \ ++ -append "rd.live.image rd.live.overlay.overlayfs=1 rd.live.overlay=LABEL=persist rd.live.dir=testdir root=LABEL=dracut console=ttyS0,115200n81 quiet selinux=0 rd.info rd.shell=0 panic=1 oops=panic softlockup_panic=1 $DEBUGFAIL" \ ++ -initrd "$TESTDIR"/initramfs.testing-autooverlay ++ ++ rootPartitions=$(sfdisk -d "$TESTDIR"/root.img | grep -c 'root\.img[0-9]') ++ [ "$rootPartitions" -eq 2 ] || return 1 ++ ++ ( ++ # Ensure that this test works when run with the `V=1` parameter, which runs the script with `set -o pipefail`. ++ set +o pipefail ++ ++ # Verify that the string "dracut-autooverlay-success" occurs in the second partition in the image file. ++ dd if="$TESTDIR"/root.img bs=1MiB skip=80 status=none \ ++ | grep -U --binary-files=binary -F -m 1 -q dracut-autooverlay-success ++ ) || return 1 + } + + test_setup() { +@@ -49,7 +71,7 @@ test_setup() { + ln -s dracut-util "${initdir}/usr/bin/dracut-getarg" + ln -s dracut-util "${initdir}/usr/bin/dracut-getargs" + +- inst_multiple mkdir ln dd stty mount poweroff ++ inst_multiple mkdir ln dd stty mount poweroff grep "$DEBUGTOOLS" + + cp -a -- /etc/ld.so.conf* "$initdir"/etc + ldconfig -r "$initdir" +@@ -113,6 +135,16 @@ test_setup() { + --force "$TESTDIR"/initramfs.testing "$KVERSION" || return 1 + + ls -sh "$TESTDIR"/initramfs.testing ++ ++ "$basedir"/dracut.sh -l -i "$TESTDIR"/overlay / \ ++ --modules "dmsquash-live-autooverlay qemu" \ ++ --omit "rngd" \ ++ --drivers "ext4 sd_mod" \ ++ --no-hostonly --no-hostonly-cmdline \ ++ --force "$TESTDIR"/initramfs.testing-autooverlay "$KVERSION" || return 1 ++ ++ ls -sh "$TESTDIR"/initramfs.testing-autooverlay ++ + rm -rf -- "$TESTDIR"/overlay + } + +diff --git a/test/container/Dockerfile-Arch b/test/container/Dockerfile-Arch +index 922b8ede..4112cc5b 100644 +--- a/test/container/Dockerfile-Arch ++++ b/test/container/Dockerfile-Arch +@@ -9,10 +9,10 @@ RUN echo 'export DRACUT_NO_XATTR=1 KVERSION=$(cd /lib/modules; ls -1 | tail -1)' + + # Install needed packages for the dracut CI container + RUN pacman --noconfirm -Sy \ +- linux dash strace dhclient asciidoc cpio pigz \ ++ linux dash strace dhclient asciidoc cpio pigz squashfs-tools \ + qemu btrfs-progs mdadm dmraid nfs-utils nfsidmap lvm2 nbd \ + dhcp networkmanager multipath-tools vi tcpdump open-iscsi \ +- git shfmt shellcheck astyle which base-devel && yes | pacman -Scc ++ git shfmt shellcheck astyle which base-devel glibc parted && yes | pacman -Scc + + RUN useradd -m build + RUN su build -c 'cd && git clone https://aur.archlinux.org/perl-config-general.git && cd perl-config-general && makepkg -s --noconfirm' +diff --git a/test/container/Dockerfile-Debian b/test/container/Dockerfile-Debian +index b4c1704e..15eb9958 100644 +--- a/test/container/Dockerfile-Debian ++++ b/test/container/Dockerfile-Debian +@@ -42,6 +42,7 @@ RUN apt-get update -y -qq && apt-get upgrade -y -qq && DEBIAN_FRONTEND=nonintera + network-manager \ + nfs-common \ + open-iscsi \ ++ parted \ + pigz \ + pkg-config \ + procps \ +diff --git a/test/container/Dockerfile-Fedora-latest b/test/container/Dockerfile-Fedora-latest +index 87c749f9..a38a72ef 100644 +--- a/test/container/Dockerfile-Fedora-latest ++++ b/test/container/Dockerfile-Fedora-latest +@@ -49,6 +49,7 @@ RUN dnf -y install --setopt=install_weak_deps=False \ + which \ + ShellCheck \ + shfmt \ ++ parted \ + && dnf -y update && dnf clean all + + # Set default command +diff --git a/test/container/Dockerfile-OpenSuse-latest b/test/container/Dockerfile-OpenSuse-latest +index 637d50c6..9aaf07b1 100644 +--- a/test/container/Dockerfile-OpenSuse-latest ++++ b/test/container/Dockerfile-OpenSuse-latest +@@ -13,7 +13,7 @@ RUN dnf -y install --setopt=install_weak_deps=False \ + strace libkmod-devel gcc bzip2 xz tar wget rpm-build make git bash-completion \ + sudo kernel dhcp-client qemu-kvm /usr/bin/qemu-system-$(uname -m) e2fsprogs \ + tcpdump iproute iputils kbd NetworkManager btrfsprogs tgt dbus-broker \ +- iscsiuio open-iscsi which ShellCheck procps pigz \ ++ iscsiuio open-iscsi which ShellCheck procps pigz parted squashfs \ + && dnf -y update && dnf clean all + + RUN shfmt_version=3.2.4; wget "https://github.com/mvdan/sh/releases/download/v${shfmt_version}/shfmt_v${shfmt_version}_linux_amd64" -O /usr/local/bin/shfmt \ +-- +2.36.1 + diff --git a/dracut.spec b/dracut.spec index d64d94f..06bd387 100644 --- a/dracut.spec +++ b/dracut.spec @@ -5,11 +5,13 @@ # strip the automatically generated dep here and instead co-own the # directory. %global __requires_exclude pkg-config -%define dist_free_release 3 + +# rpmdev-bumpspec and releng automation compatible variable +%global baserelease 4 Name: dracut Version: 057 -Release: %{dist_free_release}%{?dist} +Release: %{baserelease}%{?dist} Summary: Initramfs generator using udev @@ -35,6 +37,10 @@ Patch0: 1882-dmsquash-live-root-Run-checkisomd5-on-correct-device.patch # https://github.com/dracutdevs/dracut/pull/1521 Patch1: 1521-Never-enable-the-bluetooth-module-by-default.patch +# Add dmsquash-live-autooverlay module +# https://github.com/dracutdevs/dracut/pull/1991 +Patch2: 1991-feat-dmsquash-live-add-new-dmsquash-live-autooverlay.patch + BuildRequires: bash BuildRequires: git-core BuildRequires: pkgconfig(libkmod) >= 23 @@ -112,7 +118,7 @@ initramfs with dracut, which drops capabilities. Summary: dracut modules to build a dracut initramfs with live image capabilities Requires: %{name} = %{version}-%{release} Requires: %{name}-network = %{version}-%{release} -Requires: tar gzip coreutils bash device-mapper curl +Requires: tar gzip coreutils bash device-mapper curl parted Requires: fuse ntfs-3g %description live @@ -409,6 +415,7 @@ echo 'dracut_rescue_image="yes"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/ %files live %{dracutlibdir}/modules.d/99img-lib %{dracutlibdir}/modules.d/90dmsquash-live +%{dracutlibdir}/modules.d/90dmsquash-live-autooverlay %{dracutlibdir}/modules.d/90dmsquash-live-ntfs %{dracutlibdir}/modules.d/90livenet @@ -433,6 +440,9 @@ echo 'dracut_rescue_image="yes"' > $RPM_BUILD_ROOT%{dracutlibdir}/dracut.conf.d/ %{_prefix}/lib/kernel/install.d/51-dracut-rescue.install %changelog +* Sat Oct 15 2022 Neal Gompa - 057-4 +- Backport dmsquash-live-autooverlay module + * Thu Aug 25 2022 Pavel Valena - 057-3 - Re-add patch Never-enable-the-bluetooth-module-by-default-1521 - Recommend tpm2-tools package, as it's required by crypt module