diff --git a/0016-dracut.sh-mkdir-initdir-lib-dracut.patch b/0016-dracut.sh-mkdir-initdir-lib-dracut.patch
new file mode 100644
index 0000000..bef4cb1
--- /dev/null
+++ b/0016-dracut.sh-mkdir-initdir-lib-dracut.patch
@@ -0,0 +1,33 @@
+From 43fed15129dc4916c37ebd8980aba78b6609943b Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Tue, 12 Jun 2012 11:35:49 -0400
+Subject: [PATCH] dracut.sh: mkdir $initdir/lib/dracut
+
+---
+ dracut.sh | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/dracut.sh b/dracut.sh
+index a1b39e3..c26e0f8 100755
+--- a/dracut.sh
++++ b/dracut.sh
+@@ -731,7 +731,10 @@ if [[ $kernel_only != yes ]]; then
+ mkdir -m 0755 -p ${initdir}/lib/dracut/hooks/$_d
+ done
+ if [[ "$UID" = "0" ]]; then
+- cp -a /dev/kmsg /dev/null /dev/console $initdir/dev
++ for i in /dev/kmsg /dev/null /dev/console; do
++ [ -e $i ] || continue
++ cp -a $i $initdir/dev
++ done
+ fi
+ fi
+
+@@ -780,6 +783,7 @@ done
+ unset moddir
+
+ for i in $modules_loaded; do
++ mkdir -p $initdir/lib/dracut
+ echo "$i" >> $initdir/lib/dracut/modules.txt
+ done
+
diff --git a/0017-fix-ifup-for-static-ipv6.patch b/0017-fix-ifup-for-static-ipv6.patch
new file mode 100644
index 0000000..7df160e
--- /dev/null
+++ b/0017-fix-ifup-for-static-ipv6.patch
@@ -0,0 +1,34 @@
+From 50b08e7b85085169459dd971b711f712744598ef Mon Sep 17 00:00:00 2001
+From: Will Woods <wwoods@redhat.com>
+Date: Mon, 11 Jun 2012 13:46:21 -0400
+Subject: [PATCH] fix ifup for static ipv6
+
+"brd +" is not valid for ipv6. This causes the 'ip addr add' command to
+fail with the message "Broadcast can be set only for IPv4 addresses".
+
+So: don't use "brd +" for ipv6.
+---
+ modules.d/40network/ifup.sh | 9 ++++++---
+ 1 file changed, 6 insertions(+), 3 deletions(-)
+
+diff --git a/modules.d/40network/ifup.sh b/modules.d/40network/ifup.sh
+index 35ae3c6..ae434a8 100755
+--- a/modules.d/40network/ifup.sh
++++ b/modules.d/40network/ifup.sh
+@@ -105,10 +105,13 @@ do_static() {
+ wait_for_if_up $netif
+ [ -n "$macaddr" ] && ip link set address $macaddr
+ [ -n "$mtu" ] && ip link set mtu $mtu
+- # do not flush addr for ipv6
+- strstr $ip '*:*:*' || \
++ if strstr $ip '*:*:*'; then
++ # note no ip addr flush for ipv6
++ ip addr add $ip/$mask dev $netif
++ else
+ ip addr flush dev $netif
+- ip addr add $ip/$mask brd + dev $netif
++ ip addr add $ip/$mask brd + dev $netif
++ fi
+
+ [ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
+ [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
diff --git a/0018-ifcfg-fix-output-for-ipv6-static-addressing.patch b/0018-ifcfg-fix-output-for-ipv6-static-addressing.patch
new file mode 100644
index 0000000..daea958
--- /dev/null
+++ b/0018-ifcfg-fix-output-for-ipv6-static-addressing.patch
@@ -0,0 +1,48 @@
+From 30430fbe3096da363a2ef6b8c791e701643e15aa Mon Sep 17 00:00:00 2001
+From: Will Woods <wwoods@redhat.com>
+Date: Mon, 11 Jun 2012 13:46:22 -0400
+Subject: [PATCH] ifcfg: fix output for ipv6 static addressing
+
+IPV6 configuration is pretty different than IPV4; write out the correct
+set of values to make static IPV6 addressing work.
+---
+ modules.d/45ifcfg/write-ifcfg.sh | 23 ++++++++++++++++-------
+ 1 file changed, 16 insertions(+), 7 deletions(-)
+
+diff --git a/modules.d/45ifcfg/write-ifcfg.sh b/modules.d/45ifcfg/write-ifcfg.sh
+index 202a16a..b62170d 100755
+--- a/modules.d/45ifcfg/write-ifcfg.sh
++++ b/modules.d/45ifcfg/write-ifcfg.sh
+@@ -109,16 +109,25 @@ for netif in $IFACES ; do
+ echo "BOOTPROTO=dhcp"
+ cp /tmp/net.$netif.lease /tmp/ifcfg-leases/dhclient-$uuid-$netif.lease
+ else
+- echo "BOOTPROTO=none"
+- # If we've booted with static ip= lines, the override file is there
++ # If we've booted with static ip= lines, the override file is there
+ [ -e /tmp/net.$netif.override ] && . /tmp/net.$netif.override
+- echo "IPADDR=$ip"
+- if strstr "$mask" "."; then
+- echo "NETMASK=$mask"
++ if strstr "$ip" '*:*:*'; then
++ echo "IPV6_AUTOCONF=no"
++ echo "IPV6ADDR=$ip/$mask"
+ else
+- echo "PREFIX=$mask"
++ echo "BOOTPROTO=none"
++ echo "IPADDR=$ip"
++ if strstr "$mask" "."; then
++ echo "NETMASK=$mask"
++ else
++ echo "PREFIX=$mask"
++ fi
++ fi
++ if strstr "$gw" '*:*:*'; then
++ echo "IPV6_DEFAULTGW=$gw"
++ elif [ -n "$gw" ]; then
++ echo "GATEWAY=$gw"
+ fi
+- [ -n "$gw" ] && echo "GATEWAY=$gw"
+ fi
+ } > /tmp/ifcfg/ifcfg-$netif
+
diff --git a/0019-add-PARTUUID-as-root-PARTUUID-partition-uuid-paramet.patch b/0019-add-PARTUUID-as-root-PARTUUID-partition-uuid-paramet.patch
new file mode 100644
index 0000000..604808a
--- /dev/null
+++ b/0019-add-PARTUUID-as-root-PARTUUID-partition-uuid-paramet.patch
@@ -0,0 +1,37 @@
+From b23a2837db758215c9855f14b7d1081b7ad0077c Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Thu, 14 Jun 2012 13:04:22 +0200
+Subject: [PATCH] add PARTUUID as root=PARTUUID=<partition uuid> parameter
+
+---
+ dracut.cmdline.7.asc | 1 +
+ modules.d/95rootfs-block/parse-block.sh | 4 ++++
+ 2 files changed, 5 insertions(+)
+
+diff --git a/dracut.cmdline.7.asc b/dracut.cmdline.7.asc
+index 9fa0ee8..883223c 100644
+--- a/dracut.cmdline.7.asc
++++ b/dracut.cmdline.7.asc
+@@ -47,6 +47,7 @@ root=/dev/disk/by-label/Root
+ root=LABEL=Root
+ root=/dev/disk/by-uuid/3f5ad593-4546-4a94-a374-bcfb68aa11f7
+ root=UUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7
++root=PARTUUID=3f5ad593-4546-4a94-a374-bcfb68aa11f7
+ ----
+
+ **rootfstype=**_<filesystem type>_:: "auto" if not specified, e.g.:
+diff --git a/modules.d/95rootfs-block/parse-block.sh b/modules.d/95rootfs-block/parse-block.sh
+index 69f38be..3745352 100755
+--- a/modules.d/95rootfs-block/parse-block.sh
++++ b/modules.d/95rootfs-block/parse-block.sh
+@@ -12,6 +12,10 @@ case "$root" in
+ root="${root#block:}"
+ root="block:/dev/disk/by-uuid/${root#UUID=}"
+ rootok=1 ;;
++ block:PARTUUID=*|PARTUUID=*)
++ root="${root#block:}"
++ root="block:/dev/disk/by-partuuid/${root#PARTUUID=}"
++ rootok=1 ;;
+ /dev/*)
+ root="block:${root}"
+ rootok=1 ;;
diff --git a/0020-Debian-multiarch-support.patch b/0020-Debian-multiarch-support.patch
new file mode 100644
index 0000000..80cbd47
--- /dev/null
+++ b/0020-Debian-multiarch-support.patch
@@ -0,0 +1,45 @@
+From cacaa90c63512a068720d61d671ce3ddd1fbd81d Mon Sep 17 00:00:00 2001
+From: Thomas Lange <lange@informatik.uni-koeln.de>
+Date: Thu, 14 Jun 2012 17:42:34 +0200
+Subject: [PATCH] Debian multiarch support
+
+Hi Jon,
+
+here's the diff which works for me. The quotation marks around $@ do
+not work for me. Instead of "$@" I must to use $_dir/$@ (or
+"$_dir"/$@) but no quotation marks around $@. Could you please review
+my patch.
+---
+ dracut-functions.sh | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/dracut-functions.sh b/dracut-functions.sh
+index 6a72fce..38367b4 100755
+--- a/dracut-functions.sh
++++ b/dracut-functions.sh
+@@ -699,13 +699,13 @@ dracut_install() {
+
+ # inst_libdir_file [-n <pattern>] <file> [<file>...]
+ # Install a <file> located on a lib directory to the initramfs image
+-# -n <pattern> install non-matching files
++# -n <pattern> install matching files
+ inst_libdir_file() {
+ if [[ "$1" == "-n" ]]; then
+- local _pattern=$1
++ local _pattern=$2
+ shift 2
+ for _dir in $libdirs; do
+- for _i in "$@"; do
++ for _i in $_dir/$@; do
+ for _f in "$_dir"/$_i; do
+ [[ "$_i" =~ $_pattern ]] || continue
+ [[ -e "$_i" ]] && dracut_install "$_i"
+@@ -714,7 +714,7 @@ inst_libdir_file() {
+ done
+ else
+ for _dir in $libdirs; do
+- for _i in "$@"; do
++ for _i in $_dir/$@; do
+ for _f in "$_dir"/$_i; do
+ [[ -e "$_f" ]] && dracut_install "$_f"
+ done
diff --git a/0021-dracut-functions.sh-fixup-inst_libdir_file-again.patch b/0021-dracut-functions.sh-fixup-inst_libdir_file-again.patch
new file mode 100644
index 0000000..d219bc7
--- /dev/null
+++ b/0021-dracut-functions.sh-fixup-inst_libdir_file-again.patch
@@ -0,0 +1,34 @@
+From 7828692f97c2db3af36ad8ac3e75b60cfd971875 Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Fri, 15 Jun 2012 09:34:00 +0200
+Subject: [PATCH] dracut-functions.sh: fixup inst_libdir_file() again
+
+---
+ dracut-functions.sh | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/dracut-functions.sh b/dracut-functions.sh
+index 38367b4..7439131 100755
+--- a/dracut-functions.sh
++++ b/dracut-functions.sh
+@@ -705,16 +705,16 @@ inst_libdir_file() {
+ local _pattern=$2
+ shift 2
+ for _dir in $libdirs; do
+- for _i in $_dir/$@; do
++ for _i in "$@"; do
+ for _f in "$_dir"/$_i; do
+- [[ "$_i" =~ $_pattern ]] || continue
+- [[ -e "$_i" ]] && dracut_install "$_i"
++ [[ "$_f" =~ $_pattern ]] || continue
++ [[ -e "$_f" ]] && dracut_install "$_f"
+ done
+ done
+ done
+ else
+ for _dir in $libdirs; do
+- for _i in $_dir/$@; do
++ for _i in "$@"; do
+ for _f in "$_dir"/$_i; do
+ [[ -e "$_f" ]] && dracut_install "$_f"
+ done
diff --git a/0022-dracut.sh-output-unknown-argument.patch b/0022-dracut.sh-output-unknown-argument.patch
new file mode 100644
index 0000000..45dc59c
--- /dev/null
+++ b/0022-dracut.sh-output-unknown-argument.patch
@@ -0,0 +1,21 @@
+From 1d2c070071996dc6a31e4981b770e01746fa0ff0 Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Fri, 15 Jun 2012 11:11:10 +0200
+Subject: [PATCH] dracut.sh: output unknown argument
+
+---
+ dracut.sh | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/dracut.sh b/dracut.sh
+index c26e0f8..309fd7d 100755
+--- a/dracut.sh
++++ b/dracut.sh
+@@ -289,6 +289,7 @@ while (($# > 0)); do
+ elif ! [[ ${kernel+x} ]]; then
+ kernel=$1
+ else
++ echo "Unknown argument: $1"
+ usage; exit 1;
+ fi
+ ;;
diff --git a/0023-dracut.sh-unset-some-variables.patch b/0023-dracut.sh-unset-some-variables.patch
new file mode 100644
index 0000000..424132a
--- /dev/null
+++ b/0023-dracut.sh-unset-some-variables.patch
@@ -0,0 +1,22 @@
+From f79e587cf34e9d9c68e87ebad3e5620b0a190581 Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Fri, 15 Jun 2012 11:11:30 +0200
+Subject: [PATCH] dracut.sh: unset some variables
+
+---
+ dracut.sh | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/dracut.sh b/dracut.sh
+index 309fd7d..64cd75e 100755
+--- a/dracut.sh
++++ b/dracut.sh
+@@ -217,6 +217,8 @@ push_arg() {
+ }
+
+ verbosity_mod_l=0
++unset kernel
++unset outfile
+
+ while (($# > 0)); do
+ case ${1%%=*} in
diff --git a/0024-nfs-extend-libnss-wildcard.patch b/0024-nfs-extend-libnss-wildcard.patch
new file mode 100644
index 0000000..96186a7
--- /dev/null
+++ b/0024-nfs-extend-libnss-wildcard.patch
@@ -0,0 +1,22 @@
+From 9f6baa127aa6a4fb6cec9a6ef4e8d5b3299362b0 Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Fri, 15 Jun 2012 11:12:08 +0200
+Subject: [PATCH] nfs: extend libnss wildcard
+
+---
+ modules.d/95nfs/module-setup.sh | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/modules.d/95nfs/module-setup.sh b/modules.d/95nfs/module-setup.sh
+index bf87762..fb4dc9c 100755
+--- a/modules.d/95nfs/module-setup.sh
++++ b/modules.d/95nfs/module-setup.sh
+@@ -52,7 +52,7 @@ install() {
+ _nsslibs=${_nsslibs#|}
+ _nsslibs=${_nsslibs%|}
+
+- inst_libdir_file -n "$_nsslibs" "libnss*.so"
++ inst_libdir_file -n "$_nsslibs" 'libnss*.so*'
+
+ inst_hook cmdline 90 "$moddir/parse-nfsroot.sh"
+ inst_hook pre-udev 99 "$moddir/nfs-start-rpc.sh"
diff --git a/0025-TEST-50-MULTINIC-install-correct-nss-libs.patch b/0025-TEST-50-MULTINIC-install-correct-nss-libs.patch
new file mode 100644
index 0000000..1b60585
--- /dev/null
+++ b/0025-TEST-50-MULTINIC-install-correct-nss-libs.patch
@@ -0,0 +1,206 @@
+From 3eca0cc846e89675949abb11e9606f3222a2e266 Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Fri, 15 Jun 2012 11:12:46 +0200
+Subject: [PATCH] TEST-50-MULTINIC: install correct nss libs
+
+---
+ test/TEST-50-MULTINIC/test.sh | 118 ++++++++++++++++++++++++++---------------
+ 1 file changed, 74 insertions(+), 44 deletions(-)
+
+diff --git a/test/TEST-50-MULTINIC/test.sh b/test/TEST-50-MULTINIC/test.sh
+index 712f90e..6efa8ef 100755
+--- a/test/TEST-50-MULTINIC/test.sh
++++ b/test/TEST-50-MULTINIC/test.sh
+@@ -12,7 +12,7 @@ run_server() {
+ # Start server first
+ echo "MULTINIC TEST SETUP: Starting DHCP/NFS server"
+
+- $testdir/run-qemu -hda $TESTDIR/server.ext2 -m 256M -nographic \
++ $testdir/run-qemu -hda $TESTDIR/server.ext3 -m 512M -nographic \
+ -net nic,macaddr=52:54:00:12:34:56,model=e1000 \
+ -net socket,listen=127.0.0.1:12350 \
+ -serial $SERIAL \
+@@ -122,15 +122,41 @@ test_client() {
+
+ test_setup() {
+ # Make server root
+- dd if=/dev/null of=$TESTDIR/server.ext2 bs=1M seek=60
+- mke2fs -F $TESTDIR/server.ext2
+- mkdir $TESTDIR/mnt
+- sudo mount -o loop $TESTDIR/server.ext2 $TESTDIR/mnt
++ dd if=/dev/null of=$TESTDIR/server.ext3 bs=1M seek=60
++ mke2fs -j -F $TESTDIR/server.ext3
++ mkdir $TESTDIR/mnt
++ sudo mount -o loop $TESTDIR/server.ext3 $TESTDIR/mnt
++
++ export kernel=$KVERSION
++ export srcmods="/lib/modules/$kernel/"
++ # Detect lib paths
++
++ . $basedir/dracut-functions.sh
++ if ! [[ $libdirs ]] ; then
++ if strstr "$(ldd /bin/sh)" "/lib64/" &>/dev/null \
++ && [[ -d /lib64 ]]; then
++ libdirs+=" /lib64"
++ [[ -d /usr/lib64 ]] && libdirs+=" /usr/lib64"
++ else
++ libdirs+=" /lib"
++ [[ -d /usr/lib ]] && libdirs+=" /usr/lib"
++ fi
++ fi
+
+- kernel=$KVERSION
+- (
++ (
+ initdir=$TESTDIR/mnt
+- . $basedir/dracut-functions.sh
++
++ for _f in modules.builtin.bin modules.builtin; do
++ [[ $srcmods/$_f ]] && break
++ done || {
++ dfatal "No modules.builtin.bin and modules.builtin found!"
++ return 1
++ }
++
++ for _f in modules.builtin.bin modules.builtin modules.order; do
++ [[ $srcmods/$_f ]] && inst_simple "$srcmods/$_f" "/lib/modules/$kernel/$_f"
++ done
++
+ dracut_install sh ls shutdown poweroff stty cat ps ln ip \
+ dmesg mkdir cp ping exportfs \
+ modprobe rpc.nfsd rpc.mountd showmount tcpdump \
+@@ -144,36 +170,32 @@ test_setup() {
+ [ -f /etc/netconfig ] && dracut_install /etc/netconfig
+ type -P dhcpd >/dev/null && dracut_install dhcpd
+ [ -x /usr/sbin/dhcpd3 ] && inst /usr/sbin/dhcpd3 /usr/sbin/dhcpd
+- instmods nfsd sunrpc ipv6
++ instmods nfsd sunrpc ipv6 lockd
+ inst ./server-init.sh /sbin/init
+ inst ./hosts /etc/hosts
+ inst ./exports /etc/exports
+ inst ./dhcpd.conf /etc/dhcpd.conf
+ dracut_install /etc/nsswitch.conf /etc/rpc /etc/protocols
+ dracut_install rpc.idmapd /etc/idmapd.conf
+- if ldd $(type -P rpc.idmapd) |grep -q lib64; then
+- LIBDIR="/lib64"
+- else
+- LIBDIR="/lib"
+- fi
+
+- dracut_install $(ls {/usr,}$LIBDIR/libnfsidmap*.so* 2>/dev/null )
+- dracut_install $(ls {/usr,}$LIBDIR/libnfsidmap/*.so 2>/dev/null )
+- dracut_install $(ls {/usr,}$LIBDIR/libnss*.so 2>/dev/null)
++ inst_libdir_file 'libnfsidmap_nsswitch.so*'
++ inst_libdir_file 'libnfsidmap/*.so*'
++ inst_libdir_file 'libnfsidmap*.so*'
+
++ _nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
++ | tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
++ _nsslibs=${_nsslibs#|}
++ _nsslibs=${_nsslibs%|}
+
+- nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
+- | tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
+- nsslibs=${nsslibs#|}
+- nsslibs=${nsslibs%|}
++ inst_libdir_file -n "$_nsslibs" 'libnss*.so*'
+
+- dracut_install $(for i in $(ls {/usr,}$LIBDIR/libnss*.so 2>/dev/null); do echo $i;done | egrep "$nsslibs")
+ (
+ cd "$initdir";
+ mkdir -p dev sys proc etc var/run tmp var/lib/{dhcpd,rpcbind}
+ mkdir -p var/lib/nfs/{v4recovery,rpc_pipefs}
+ chmod 777 var/lib/rpcbind var/lib/nfs
+ )
++
+ inst /etc/nsswitch.conf /etc/nsswitch.conf
+ inst /etc/passwd /etc/passwd
+ inst /etc/group /etc/group
+@@ -181,49 +203,57 @@ test_setup() {
+ inst_library $i
+ done
+
+- /sbin/depmod -a -b "$initdir" $kernel
++ /sbin/depmod -a -b "$initdir" $kernel
++
+ cp -a /etc/ld.so.conf* $initdir/etc
+ sudo ldconfig -r "$initdir"
+- )
++ )
+
+ # Make client root inside server root
+ initdir=$TESTDIR/mnt/nfs/client
+ mkdir -p $initdir
+
+ (
+- . $basedir/dracut-functions.sh
+- dracut_install sh shutdown poweroff stty cat ps ln ip \
+- mount dmesg mkdir \
+- cp ping grep ls
++ dracut_install sh shutdown poweroff stty cat ps ln ip \
++ mount dmesg mkdir cp ping grep ls
+ for _terminfodir in /lib/terminfo /etc/terminfo /usr/share/terminfo; do
+ [ -f ${_terminfodir}/l/linux ] && break
+ done
+ dracut_install -o ${_terminfodir}/l/linux
+- inst ./client-init.sh /sbin/init
+- (
+- cd "$initdir"
+- mkdir -p dev sys proc etc run
+- mkdir -p var/lib/nfs/rpc_pipefs
++ inst ./client-init.sh /sbin/init
++ (
++ cd "$initdir"
++ mkdir -p dev sys proc etc run
++ mkdir -p var/lib/nfs/rpc_pipefs
+ )
+- inst /etc/nsswitch.conf /etc/nsswitch.conf
+- inst /etc/passwd /etc/passwd
+- inst /etc/group /etc/group
+- for i in /lib*/libnss_files*;do
+- inst_library $i
+- done
++ inst /etc/nsswitch.conf /etc/nsswitch.conf
++ inst /etc/passwd /etc/passwd
++ inst /etc/group /etc/group
++
++ inst_libdir_file 'libnfsidmap_nsswitch.so*'
++ inst_libdir_file 'libnfsidmap/*.so*'
++ inst_libdir_file 'libnfsidmap*.so*'
++
++ _nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
++ | tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
++ _nsslibs=${_nsslibs#|}
++ _nsslibs=${_nsslibs%|}
++
++ inst_libdir_file -n "$_nsslibs" 'libnss*.so*'
+
+ cp -a /etc/ld.so.conf* $initdir/etc
+ sudo ldconfig -r "$initdir"
+- )
++ )
++
++ chroot $initdir
+
+- sudo umount $TESTDIR/mnt
+- rm -fr $TESTDIR/mnt
++ sudo umount $TESTDIR/mnt
++ rm -fr $TESTDIR/mnt
+
+ # Make an overlay with needed tools for the test harness
+ (
+ initdir=$TESTDIR/overlay
+ mkdir $TESTDIR/overlay
+- . $basedir/dracut-functions.sh
+ dracut_install poweroff shutdown
+ inst_hook emergency 000 ./hard-off.sh
+ inst_simple ./99-idesymlinks.rules /etc/udev/rules.d/99-idesymlinks.rules
+@@ -232,7 +262,7 @@ test_setup() {
+ # Make server's dracut image
+ $basedir/dracut.sh -l -i $TESTDIR/overlay / \
+ -m "dash udev-rules base rootfs-block debug kernel-modules" \
+- -d "piix ide-gd_mod ata_piix ext2 sd_mod e1000" \
++ -d "piix ide-gd_mod ata_piix ext3 sd_mod e1000" \
+ -f $TESTDIR/initramfs.server $KVERSION || return 1
+
+ # Make client's dracut image
diff --git a/0026-Revert-network-ifup.sh-default-to-dhcp-for-BOOTIF.patch b/0026-Revert-network-ifup.sh-default-to-dhcp-for-BOOTIF.patch
new file mode 100644
index 0000000..49f2b8b
--- /dev/null
+++ b/0026-Revert-network-ifup.sh-default-to-dhcp-for-BOOTIF.patch
@@ -0,0 +1,28 @@
+From f9ad49c2a59d1c452a2137a6332ff77afcde1be3 Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Fri, 15 Jun 2012 11:55:59 +0200
+Subject: [PATCH] Revert "network/ifup.sh: default to dhcp for BOOTIF"
+
+This reverts commit bebb12fd0ec3cbb88006e384a9a277391a2f3a37.
+---
+ modules.d/40network/ifup.sh | 7 -------
+ 1 file changed, 7 deletions(-)
+
+diff --git a/modules.d/40network/ifup.sh b/modules.d/40network/ifup.sh
+index ae434a8..245b450 100755
+--- a/modules.d/40network/ifup.sh
++++ b/modules.d/40network/ifup.sh
+@@ -216,13 +216,6 @@ if [ "$netif" = "$vlanname" ] && [ ! -e /tmp/net.$vlanname.up ]; then
+ ip link add dev "$vlanname" link "$phydevice" type vlan id "$(get_vid $vlanname; echo $?)"
+ fi
+
+-# BOOTIF= defaults to dhcpv4
+-bootif=$(getargs BOOTIF=)
+-if [ -n "$bootif" ] ; then
+- do_dhcp -4
+- exit 0
+-fi
+-
+ # Specific configuration, spin through the kernel command line
+ # looking for ip= lines
+ for p in $(getargs ip=); do
diff --git a/0027-Revert-network-ifup.sh-do-not-default-to-dhcp-for-in.patch b/0027-Revert-network-ifup.sh-do-not-default-to-dhcp-for-in.patch
new file mode 100644
index 0000000..992f0a3
--- /dev/null
+++ b/0027-Revert-network-ifup.sh-do-not-default-to-dhcp-for-in.patch
@@ -0,0 +1,33 @@
+From c9aa3cc950ebec597e51cbc0899777c2a99ca276 Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Fri, 15 Jun 2012 11:56:05 +0200
+Subject: [PATCH] Revert "network/ifup.sh: do not default to dhcp, for
+ interfaces without ip=..."
+
+This reverts commit ede0532c580fdbace548511b07857fb2e004b299.
+---
+ modules.d/40network/ifup.sh | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+diff --git a/modules.d/40network/ifup.sh b/modules.d/40network/ifup.sh
+index 245b450..31eb966 100755
+--- a/modules.d/40network/ifup.sh
++++ b/modules.d/40network/ifup.sh
+@@ -216,6 +216,17 @@ if [ "$netif" = "$vlanname" ] && [ ! -e /tmp/net.$vlanname.up ]; then
+ ip link add dev "$vlanname" link "$phydevice" type vlan id "$(get_vid $vlanname; echo $?)"
+ fi
+
++# No ip lines default to dhcp
++ip=$(getarg ip)
++
++if [ -z "$ip" ]; then
++ if [ "$netroot" = "dhcp6" ]; then
++ do_dhcp -6
++ else
++ do_dhcp -4
++ fi
++fi
++
+ # Specific configuration, spin through the kernel command line
+ # looking for ip= lines
+ for p in $(getargs ip=); do
diff --git a/0028-resolve-conflict-between-cms-network-rules-and-defau.patch b/0028-resolve-conflict-between-cms-network-rules-and-defau.patch
new file mode 100644
index 0000000..2bf6bc1
--- /dev/null
+++ b/0028-resolve-conflict-between-cms-network-rules-and-defau.patch
@@ -0,0 +1,36 @@
+From 8fab6e0463e0b0c70327c2733911098aa56137a7 Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Tue, 12 Jun 2012 14:40:43 +0200
+Subject: [PATCH] resolve conflict between cms network rules and default rules
+
+---
+ modules.d/40network/net-genrules.sh | 2 +-
+ modules.d/80cms/cmssetup.sh | 2 ++
+ 2 files changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/modules.d/40network/net-genrules.sh b/modules.d/40network/net-genrules.sh
+index 2d3dff2..99d0fe5 100755
+--- a/modules.d/40network/net-genrules.sh
++++ b/modules.d/40network/net-genrules.sh
+@@ -53,7 +53,7 @@ fix_bootif() {
+
+ # Default: We don't know the interface to use, handle all
+ else
+- printf 'SUBSYSTEM=="net", RUN+="%s"\n' "/sbin/initqueue --onetime $ifup"
++ printf 'SUBSYSTEM=="net", RUN+="%s"\n' "/sbin/initqueue --onetime $ifup" > /etc/udev/rules.d/61-default-net.rules
+ fi
+
+ } > /etc/udev/rules.d/60-net.rules
+diff --git a/modules.d/80cms/cmssetup.sh b/modules.d/80cms/cmssetup.sh
+index 41c853c..2208803 100755
+--- a/modules.d/80cms/cmssetup.sh
++++ b/modules.d/80cms/cmssetup.sh
+@@ -166,6 +166,8 @@ processcmsfile()
+ fi
+
+ printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="%s", KERNELS=="%s", ENV{INTERFACE}=="?*", RUN+="/sbin/initqueue --onetime --unique --name cmsifup-$env{INTERFACE} /sbin/cmsifup $env{INTERFACE}"\n' "$driver" "$devbusid" > /etc/udev/rules.d/99-cms.rules
++ # remove the default net rules
++ rm -f /etc/udev/rules.d/61-default-net.rules
+ [[ -f /etc/udev/rules.d/60-net.rules ]] \
+ || printf 'SUBSYSTEM=="net", ACTION=="online", RUN+="/sbin/initqueue --onetime --env netif=$env{INTERFACE} source_hook initqueue/online"\n' >> /etc/udev/rules.d/99-cms.rules
+
diff --git a/0029-fixed-instmods-return-code-and-set-pipefail-globally.patch b/0029-fixed-instmods-return-code-and-set-pipefail-globally.patch
new file mode 100644
index 0000000..197519e
--- /dev/null
+++ b/0029-fixed-instmods-return-code-and-set-pipefail-globally.patch
@@ -0,0 +1,108 @@
+From 7abd426438984f9c3112fd409e9c019408fe85a4 Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Mon, 18 Jun 2012 12:51:21 +0200
+Subject: [PATCH] fixed instmods() return code and set pipefail globally
+
+---
+ dracut-functions.sh | 21 +++++++++------------
+ dracut.sh | 2 ++
+ 2 files changed, 11 insertions(+), 12 deletions(-)
+
+diff --git a/dracut-functions.sh b/dracut-functions.sh
+index 7439131..68c81f2 100755
+--- a/dracut-functions.sh
++++ b/dracut-functions.sh
+@@ -1028,11 +1028,11 @@ install_kmod_with_fw() {
+ _kmod=${_kmod/-/_}
+ if [[ "$_kmod" =~ $omit_drivers ]]; then
+ dinfo "Omitting driver $_kmod"
+- return 1
++ return 0
+ fi
+ if [[ "${1##*/lib/modules/$kernel/}" =~ $omit_drivers ]]; then
+ dinfo "Omitting driver $_kmod"
+- return 1
++ return 0
+ fi
+ fi
+
+@@ -1073,16 +1073,13 @@ install_kmod_with_fw() {
+ # rest of args = arguments to modprobe
+ # _fderr specifies FD passed from surrounding scope
+ for_each_kmod_dep() {
+- local _func=$1 _kmod=$2 _cmd _modpath _options _found=0
++ local _func=$1 _kmod=$2 _cmd _modpath _options
+ shift 2
+ modprobe "$@" --ignore-install --show-depends $_kmod 2>&${_fderr} | (
+ while read _cmd _modpath _options; do
+ [[ $_cmd = insmod ]] || continue
+ $_func ${_modpath} || exit $?
+- _found=1
+ done
+- [[ $_found -eq 0 ]] && exit 1
+- exit 0
+ )
+ }
+
+@@ -1127,14 +1124,16 @@ instmods() {
+ ( [[ "$_mpargs" ]] && echo $_mpargs
+ cat "${srcmods}/modules.${_mod#=}" ) \
+ | instmods
++ ((_ret+=$?))
+ else
+ ( [[ "$_mpargs" ]] && echo $_mpargs
+- find "$srcmods" -path "*/${_mod#=}/*" -printf '%f\n' ) \
++ find "$srcmods" -type f -path "*/${_mod#=}/*" -printf '%f\n' ) \
+ | instmods
++ ((_ret+=$?))
+ fi
+ ;;
+ --*) _mpargs+=" $_mod" ;;
+- i2o_scsi) return ;; # Do not load this diagnostic-only module
++ i2o_scsi) return 0;; # Do not load this diagnostic-only module
+ *)
+ _mod=${_mod##*/}
+ # if we are already installed, skip this module and go on
+@@ -1143,14 +1142,14 @@ instmods() {
+
+ if [[ $omit_drivers ]] && [[ "$1" =~ $omit_drivers ]]; then
+ dinfo "Omitting driver ${_mod##$srcmods}"
+- return
++ return 0
+ fi
+ # If we are building a host-specific initramfs and this
+ # module is not already loaded, move on to the next one.
+ [[ $hostonly ]] \
+ && ! [[ -d $(echo /sys/module/${_mod//-/_}|{ read a b; echo $a; }) ]] \
+ && ! [[ "$add_drivers" =~ " ${_mod} " ]] \
+- && return
++ && return 0
+
+ # We use '-d' option in modprobe only if modules prefix path
+ # differs from default '/'. This allows us to use Dracut with
+@@ -1193,12 +1192,10 @@ instmods() {
+ }
+
+ local _ret _filter_not_found='FATAL: Module .* not found.'
+- set -o pipefail
+ # Capture all stderr from modprobe to _fderr. We could use {var}>...
+ # redirections, but that would make dracut require bash4 at least.
+ eval "( instmods_1 \"\$@\" ) ${_fderr}>&1" \
+ | while read line; do [[ "$line" =~ $_filter_not_found ]] || echo $line;done | derror
+ _ret=$?
+- set +o pipefail
+ return $_ret
+ }
+diff --git a/dracut.sh b/dracut.sh
+index 64cd75e..919f78e 100755
+--- a/dracut.sh
++++ b/dracut.sh
+@@ -26,6 +26,8 @@
+ # store for logging
+ dracut_args="$@"
+
++set -o pipefail
++
+ usage() {
+ [[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
+ if [[ -f $dracutbasedir/dracut-version.sh ]]; then
diff --git a/0030-Set-some-global-variables-in-dracut-functions.sh.patch b/0030-Set-some-global-variables-in-dracut-functions.sh.patch
new file mode 100644
index 0000000..c0f0383
--- /dev/null
+++ b/0030-Set-some-global-variables-in-dracut-functions.sh.patch
@@ -0,0 +1,109 @@
+From 8d95b8b338d65188c517b3bda8a4697867c6ef01 Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Mon, 18 Jun 2012 12:52:39 +0200
+Subject: [PATCH] Set some global variables in dracut-functions.sh
+
+---
+ dracut-functions.sh | 34 +++++++++++++++++++++++++++++++---
+ dracut.sh | 22 ----------------------
+ 2 files changed, 31 insertions(+), 25 deletions(-)
+
+diff --git a/dracut-functions.sh b/dracut-functions.sh
+index 68c81f2..1137919 100755
+--- a/dracut-functions.sh
++++ b/dracut-functions.sh
+@@ -20,6 +20,9 @@
+ # along with this program. If not, see <http://www.gnu.org/licenses/>.
+ #
+
++# Generic substring function. If $2 is in $1, return 0.
++strstr() { [ "${1#*$2*}" != "$1" ]; }
++
+ if ! [[ $dracutbasedir ]]; then
+ dracutbasedir=${BASH_SOURCE[0]%/*}
+ [[ $dracutbasedir = "dracut-functions" ]] && dracutbasedir="."
+@@ -27,6 +30,34 @@ if ! [[ $dracutbasedir ]]; then
+ dracutbasedir="$(readlink -f $dracutbasedir)"
+ fi
+
++# Detect lib paths
++if ! [[ $libdirs ]] ; then
++ if strstr "$(ldd /bin/sh)" "/lib64/" &>/dev/null \
++ && [[ -d /lib64 ]]; then
++ libdirs+=" /lib64"
++ [[ -d /usr/lib64 ]] && libdirs+=" /usr/lib64"
++ else
++ libdirs+=" /lib"
++ [[ -d /usr/lib ]] && libdirs+=" /usr/lib"
++ fi
++ export libdirs
++fi
++
++if ! [[ $kernel ]]; then
++ kernel=$(uname -r)
++ export kernel
++fi
++
++srcmods="/lib/modules/$kernel/"
++[[ $drivers_dir ]] && {
++ if vercmp $(modprobe --version | cut -d' ' -f3) lt 3.7; then
++ dfatal 'To use --kmoddir option module-init-tools >= 3.7 is required.'
++ exit 1
++ fi
++ srcmods="$drivers_dir"
++}
++export srcmods
++
+ if ! type dinfo >/dev/null 2>&1; then
+ . "$dracutbasedir/dracut-logger.sh"
+ dlog_init
+@@ -41,9 +72,6 @@ fi
+ export hookdirs
+ }
+
+-# Generic substring function. If $2 is in $1, return 0.
+-strstr() { [ "${1#*$2*}" != "$1" ]; }
+-
+ # Create all subdirectories for given path without creating the last element.
+ # $1 = path
+ mksubdirs() { mkdir -m 0755 -p ${1%/*}; }
+diff --git a/dracut.sh b/dracut.sh
+index 919f78e..5600ec0 100755
+--- a/dracut.sh
++++ b/dracut.sh
+@@ -531,18 +531,6 @@ ddebug "Executing $0 $dracut_args"
+ exit 0
+ }
+
+-# Detect lib paths
+-if ! [[ $libdirs ]] ; then
+- if strstr "$(ldd /bin/sh)" "/lib64/" &>/dev/null \
+- && [[ -d /lib64 ]]; then
+- libdirs+=" /lib64"
+- [[ -d /usr/lib64 ]] && libdirs+=" /usr/lib64"
+- else
+- libdirs+=" /lib"
+- [[ -d /usr/lib ]] && libdirs+=" /usr/lib"
+- fi
+-fi
+-
+ # This is kinda legacy -- eventually it should go away.
+ case $dracutmodules in
+ ""|auto) dracutmodules="all" ;;
+@@ -550,16 +538,6 @@ esac
+
+ abs_outfile=$(readlink -f "$outfile") && outfile="$abs_outfile"
+
+-srcmods="/lib/modules/$kernel/"
+-[[ $drivers_dir ]] && {
+- if vercmp $(modprobe --version | cut -d' ' -f3) lt 3.7; then
+- dfatal 'To use --kmoddir option module-init-tools >= 3.7 is required.'
+- exit 1
+- fi
+- srcmods="$drivers_dir"
+-}
+-export srcmods
+-
+ [[ -f $srcmods/modules.dep ]] || {
+ dfatal "$srcmods/modules.dep is missing. Did you run depmod?"
+ exit 1
diff --git a/0031-iscsi-module-setup.sh-only-install-s390-driver-on-s3.patch b/0031-iscsi-module-setup.sh-only-install-s390-driver-on-s3.patch
new file mode 100644
index 0000000..35f87cd
--- /dev/null
+++ b/0031-iscsi-module-setup.sh-only-install-s390-driver-on-s3.patch
@@ -0,0 +1,33 @@
+From 4f9f76cd629cfe7c31586eb2bfd0d4c61322db86 Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Mon, 18 Jun 2012 13:26:55 +0200
+Subject: [PATCH] iscsi/module-setup.sh: only install s390 driver on s390 arch
+
+---
+ modules.d/95iscsi/module-setup.sh | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/modules.d/95iscsi/module-setup.sh b/modules.d/95iscsi/module-setup.sh
+index bfd9d73..fefc240 100755
+--- a/modules.d/95iscsi/module-setup.sh
++++ b/modules.d/95iscsi/module-setup.sh
+@@ -37,6 +37,8 @@ depends() {
+ }
+
+ installkernel() {
++ local _arch=$(uname -m)
++
+ instmods iscsi_tcp iscsi_ibft crc32c bnx2i iscsi_boot_sysfs qla4xxx cxgb3i cxgb4i be2iscsi
+ iscsi_module_filter() {
+ local _iscsifuncs='iscsi_register_transport'
+@@ -47,8 +49,9 @@ installkernel() {
+ *.ko.xz) [[ $(xz -dc <$_f) =~ $_iscsifuncs ]] && echo "$_f" ;;
+ esac
+ done
++ return 0;
+ }
+- { find_kernel_modules_by_path drivers/scsi; find_kernel_modules_by_path drivers/s390/scsi; } \
++ { find_kernel_modules_by_path drivers/scsi; if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then find_kernel_modules_by_path drivers/s390/scsi; fi;} \
+ | iscsi_module_filter | instmods
+ }
+
diff --git a/0032-plymouth-fixed-inst_libdir_file-call.patch b/0032-plymouth-fixed-inst_libdir_file-call.patch
new file mode 100644
index 0000000..d2f5273
--- /dev/null
+++ b/0032-plymouth-fixed-inst_libdir_file-call.patch
@@ -0,0 +1,33 @@
+From 0efc6c716a0f4e0def943e3c661decc75fe6f958 Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Mon, 18 Jun 2012 13:45:13 +0200
+Subject: [PATCH] plymouth: fixed inst_libdir_file() call
+
+https://bugzilla.redhat.com/show_bug.cgi?id=831349
+---
+ modules.d/50plymouth/plymouth-populate-initrd.sh | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/modules.d/50plymouth/plymouth-populate-initrd.sh b/modules.d/50plymouth/plymouth-populate-initrd.sh
+index 7ab1a5d..1e2ffe7 100755
+--- a/modules.d/50plymouth/plymouth-populate-initrd.sh
++++ b/modules.d/50plymouth/plymouth-populate-initrd.sh
+@@ -11,8 +11,9 @@ dracut_install /bin/plymouth \
+
+ mkdir -m 0755 -p "${initdir}/usr/share/plymouth"
+
++inst_libdir_file "plymouth/text.so" "plymouth/details.so"
++
+ if [[ $hostonly ]]; then
+- inst_libdir_file "plymouth/text.so" "plymouth/details.so"
+ dracut_install \
+ "/usr/share/plymouth/themes/details/details.plymouth" \
+ "/usr/share/plymouth/themes/text/text.plymouth" \
+@@ -37,7 +38,6 @@ else
+ mkdir -m 0755 -p "${initdir}/$THEME_DIR"
+ dracut_install "$x"
+ done
+- inst_libdir_file "/plymouth/{text,details}.so"
+ (
+ cd ${initdir}/usr/share/plymouth/themes;
+ ln -s text/text.plymouth default.plymouth 2>&1;
diff --git a/0033-add-04watchdog-dracut-module.patch b/0033-add-04watchdog-dracut-module.patch
new file mode 100644
index 0000000..0adbaf8
--- /dev/null
+++ b/0033-add-04watchdog-dracut-module.patch
@@ -0,0 +1,80 @@
+From ef914f7d833b7ea7a5916e7d56c9e9c158d3783a Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Mon, 18 Jun 2012 19:17:22 +0200
+Subject: [PATCH] add 04watchdog dracut module
+
+---
+ dracut.spec | 1 +
+ modules.d/04watchdog/module-setup.sh | 23 +++++++++++++++++++++++
+ modules.d/04watchdog/watchdog.sh | 6 ++++++
+ modules.d/99base/dracut-lib.sh | 2 ++
+ 4 files changed, 32 insertions(+)
+ create mode 100755 modules.d/04watchdog/module-setup.sh
+ create mode 100755 modules.d/04watchdog/watchdog.sh
+
+diff --git a/dracut.spec b/dracut.spec
+index eb5df2c..6e8c733 100644
+--- a/dracut.spec
++++ b/dracut.spec
+@@ -254,6 +254,7 @@ rm -rf $RPM_BUILD_ROOT
+ %{_mandir}/man5/dracut.conf.5*
+ %{dracutlibdir}/modules.d/00bootchart
+ %{dracutlibdir}/modules.d/00dash
++%{dracutlibdir}/modules.d/04watchdog
+ %{dracutlibdir}/modules.d/05busybox
+ %{dracutlibdir}/modules.d/10i18n
+ %{dracutlibdir}/modules.d/30convertfs
+diff --git a/modules.d/04watchdog/module-setup.sh b/modules.d/04watchdog/module-setup.sh
+new file mode 100755
+index 0000000..eb46143
+--- /dev/null
++++ b/modules.d/04watchdog/module-setup.sh
+@@ -0,0 +1,23 @@
++#!/bin/bash
++# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
++# ex: ts=8 sw=4 sts=4 et filetype=sh
++
++check() {
++ return 255
++}
++
++depends() {
++ return 0
++}
++
++install() {
++ inst_hook cmdline 00 "$moddir/watchdog.sh"
++ inst_hook cmdline 50 "$moddir/watchdog.sh"
++ inst_hook pre-trigger 00 "$moddir/watchdog.sh"
++ inst_hook initqueue 00 "$moddir/watchdog.sh"
++ inst_hook mount 00 "$moddir/watchdog.sh"
++ inst_hook mount 50 "$moddir/watchdog.sh"
++ inst_hook pre-pivot 00 "$moddir/watchdog.sh"
++ inst_hook cleanup 00 "$moddir/watchdog.sh"
++}
++
+diff --git a/modules.d/04watchdog/watchdog.sh b/modules.d/04watchdog/watchdog.sh
+new file mode 100755
+index 0000000..712969f
+--- /dev/null
++++ b/modules.d/04watchdog/watchdog.sh
+@@ -0,0 +1,6 @@
++#!/bin/sh
++if [ -e /dev/watchdog ]; then
++ >/dev/watchdog
++else
++ modprobe ib700wdt
++fi
+diff --git a/modules.d/99base/dracut-lib.sh b/modules.d/99base/dracut-lib.sh
+index 3ecba9a..8cfd7b3 100755
+--- a/modules.d/99base/dracut-lib.sh
++++ b/modules.d/99base/dracut-lib.sh
+@@ -832,6 +832,8 @@ emergency_shell()
+ fi
+ [ -c "$_ctty" ] || _ctty=/dev/tty1
+ strstr "$(setsid --help 2>/dev/null)" "ctty" && CTTY="-c"
++ # stop watchdog
++ echo 'V' > /dev/watchdog
+ setsid $CTTY /bin/sh -i -l 0<$_ctty 1>$_ctty 2>&1
+ else
+ warn "$action has failed. To debug this issue add \"rd.shell\" to the kernel command line."
diff --git a/0034-TEST-01-BASIC-add-watchdog.patch b/0034-TEST-01-BASIC-add-watchdog.patch
new file mode 100644
index 0000000..833ed58
--- /dev/null
+++ b/0034-TEST-01-BASIC-add-watchdog.patch
@@ -0,0 +1,61 @@
+From c8f3a1c057ffd4ea288f9e38d9e396eebdafcd0c Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Mon, 18 Jun 2012 19:20:16 +0200
+Subject: [PATCH] TEST-01-BASIC: add watchdog
+
+---
+ test/TEST-01-BASIC/test-init.sh | 3 ++-
+ test/TEST-01-BASIC/test.sh | 11 +++++++----
+ 2 files changed, 9 insertions(+), 5 deletions(-)
+
+diff --git a/test/TEST-01-BASIC/test-init.sh b/test/TEST-01-BASIC/test-init.sh
+index f8d6693..5fc02d9 100755
+--- a/test/TEST-01-BASIC/test-init.sh
++++ b/test/TEST-01-BASIC/test-init.sh
+@@ -1,10 +1,11 @@
+ #!/bin/sh
++>/dev/watchdog
+ export PATH=/sbin:/bin:/usr/sbin:/usr/bin
+ strstr() { [ "${1#*$2*}" != "$1" ]; }
+ CMDLINE=$(while read line; do echo $line;done < /proc/cmdline)
+ plymouth --quit
+ exec >/dev/console 2>&1
+-echo "dracut-root-block-success" >/dev/sda1
++echo "dracut-root-block-success" >/dev/sdb
+ export TERM=linux
+ export PS1='initramfs-test:\w\$ '
+ [ -f /etc/mtab ] || ln -sfn /proc/mounts /etc/mtab
+diff --git a/test/TEST-01-BASIC/test.sh b/test/TEST-01-BASIC/test.sh
+index 46e75c7..6c39d7b 100755
+--- a/test/TEST-01-BASIC/test.sh
++++ b/test/TEST-01-BASIC/test.sh
+@@ -7,13 +7,16 @@ KVERSION=${KVERSION-$(uname -r)}
+ #DEBUGFAIL="rd.shell rd.break"
+
+ test_run() {
++ dd if=/dev/zero of=$TESTDIR/result bs=1M count=1
+ $testdir/run-qemu \
+ -hda $TESTDIR/root.ext3 \
++ -hdb $TESTDIR/result \
+ -m 256M -nographic \
+ -net none -kernel /boot/vmlinuz-$KVERSION \
++ -watchdog ib700 -watchdog-action poweroff \
+ -append "root=LABEL=dracut rw quiet rd.retry=3 rd.info console=ttyS0,115200n81 selinux=0 rd.debug $DEBUGFAIL" \
+- -initrd $TESTDIR/initramfs.testing
+- grep -m 1 -q dracut-root-block-success $TESTDIR/root.ext3 || return 1
++ -initrd $TESTDIR/initramfs.testing || return 1
++ grep -m 1 -q dracut-root-block-success $TESTDIR/result || return 1
+ }
+
+ test_setup() {
+@@ -81,8 +84,8 @@ test_setup() {
+ inst_simple ./99-idesymlinks.rules /etc/udev/rules.d/99-idesymlinks.rules
+ )
+ sudo $basedir/dracut.sh -l -i $TESTDIR/overlay / \
+- -a "debug" \
+- -d "piix ide-gd_mod ata_piix ext3 sd_mod" \
++ -a "debug watchdog" \
++ -d "piix ide-gd_mod ata_piix ext3 sd_mod ib700wdt" \
+ -f $TESTDIR/initramfs.testing $KVERSION || return 1
+
+ # -o "plymouth network md dmraid multipath fips caps crypt btrfs resume dmsquash-live dm"
diff --git a/0035-TEST-20-NFS-add-watchdog.patch b/0035-TEST-20-NFS-add-watchdog.patch
new file mode 100644
index 0000000..7fcabae
--- /dev/null
+++ b/0035-TEST-20-NFS-add-watchdog.patch
@@ -0,0 +1,62 @@
+From 483b1e3aa83c5bd56b2f2c75144b0a8c276d5bec Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Mon, 18 Jun 2012 19:13:09 +0200
+Subject: [PATCH] TEST-20-NFS: add watchdog
+
+---
+ test/TEST-20-NFS/server-init.sh | 2 +-
+ test/TEST-20-NFS/test.sh | 10 ++++++----
+ 2 files changed, 7 insertions(+), 5 deletions(-)
+
+diff --git a/test/TEST-20-NFS/server-init.sh b/test/TEST-20-NFS/server-init.sh
+index 26a2abd..a60a013 100755
+--- a/test/TEST-20-NFS/server-init.sh
++++ b/test/TEST-20-NFS/server-init.sh
+@@ -31,6 +31,6 @@ dhcpd -cf /etc/dhcpd.conf -lf /var/lib/dhcpd/dhcpd.leases
+ #sh -i
+ # Wait forever for the VM to die
+ echo "Serving NFS mounts"
+-while sleep 60; do sleep 60; done
++while sleep 30; do >/dev/watchdog; done
+ mount -n -o remount,ro /
+ poweroff -f
+diff --git a/test/TEST-20-NFS/test.sh b/test/TEST-20-NFS/test.sh
+index a6bde0e..ea65c2a 100755
+--- a/test/TEST-20-NFS/test.sh
++++ b/test/TEST-20-NFS/test.sh
+@@ -18,6 +18,7 @@ run_server() {
+ -net nic,macaddr=52:54:00:12:34:56,model=e1000 \
+ -net socket,listen=127.0.0.1:12320 \
+ -serial $SERIAL \
++ -watchdog ib700 -watchdog-action poweroff \
+ -kernel /boot/vmlinuz-$KVERSION \
+ -append "root=/dev/sda rw quiet console=ttyS0,115200n81 selinux=0" \
+ -initrd $TESTDIR/initramfs.server \
+@@ -53,6 +54,7 @@ client_test() {
+ -net nic,macaddr=$mac,model=e1000 \
+ -net socket,connect=127.0.0.1:12320 \
+ -kernel /boot/vmlinuz-$KVERSION \
++ -watchdog ib700 -watchdog-action poweroff \
+ -append "$cmdline $DEBUGFAIL rd.debug rd.retry=10 rd.info quiet ro console=ttyS0,115200n81 selinux=0" \
+ -initrd $TESTDIR/initramfs.testing
+
+@@ -307,15 +309,15 @@ test_setup() {
+
+ # Make server's dracut image
+ $basedir/dracut.sh -l -i $TESTDIR/overlay / \
+- -m "dash udev-rules base rootfs-block debug kernel-modules" \
+- -d "piix ide-gd_mod ata_piix ext3 sd_mod e1000" \
++ -m "dash udev-rules base rootfs-block debug kernel-modules watchdog" \
++ -d "piix ide-gd_mod ata_piix ext3 sd_mod e1000 ib700wdt" \
+ -f $TESTDIR/initramfs.server $KVERSION || return 1
+
+ # Make client's dracut image
+ $basedir/dracut.sh -l -i $TESTDIR/overlay / \
+ -o "plymouth" \
+- -a "debug" \
+- -d "piix ide-gd_mod ata_piix sd_mod e1000 nfs sunrpc" \
++ -a "debug watchdog" \
++ -d "piix ide-gd_mod ata_piix sd_mod e1000 nfs sunrpc ib700wdt" \
+ -f $TESTDIR/initramfs.testing $KVERSION || return 1
+ }
+
diff --git a/0036-TEST-50-MULTINIC-add-watchdog.patch b/0036-TEST-50-MULTINIC-add-watchdog.patch
new file mode 100644
index 0000000..b18a288
--- /dev/null
+++ b/0036-TEST-50-MULTINIC-add-watchdog.patch
@@ -0,0 +1,84 @@
+From 2dbd71b77a72a88cd4b8ccd50a40de3b7bfd1dd0 Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Mon, 18 Jun 2012 19:22:35 +0200
+Subject: [PATCH] TEST-50-MULTINIC: add watchdog
+
+---
+ test/TEST-50-MULTINIC/server-init.sh | 2 +-
+ test/TEST-50-MULTINIC/test.sh | 34 ++++++++++++++++++----------------
+ 2 files changed, 19 insertions(+), 17 deletions(-)
+
+diff --git a/test/TEST-50-MULTINIC/server-init.sh b/test/TEST-50-MULTINIC/server-init.sh
+index 39f6a1d..c02d84c 100755
+--- a/test/TEST-50-MULTINIC/server-init.sh
++++ b/test/TEST-50-MULTINIC/server-init.sh
+@@ -26,6 +26,6 @@ dhcpd -cf /etc/dhcpd.conf -lf /var/lib/dhcpd/dhcpd.leases
+ #sh -i
+ # Wait forever for the VM to die
+ echo "Serving NFS mounts"
+-while sleep 60; do sleep 60; done
++while sleep 30; do echo >/dev/watchdog; done
+ mount -n -o remount,ro /
+ poweroff -f
+diff --git a/test/TEST-50-MULTINIC/test.sh b/test/TEST-50-MULTINIC/test.sh
+index 6efa8ef..1655608 100755
+--- a/test/TEST-50-MULTINIC/test.sh
++++ b/test/TEST-50-MULTINIC/test.sh
+@@ -13,12 +13,13 @@ run_server() {
+ echo "MULTINIC TEST SETUP: Starting DHCP/NFS server"
+
+ $testdir/run-qemu -hda $TESTDIR/server.ext3 -m 512M -nographic \
+- -net nic,macaddr=52:54:00:12:34:56,model=e1000 \
+- -net socket,listen=127.0.0.1:12350 \
+- -serial $SERIAL \
+- -kernel /boot/vmlinuz-$KVERSION \
+- -append "selinux=0 root=/dev/sda rd.debug rd.info rw quiet console=ttyS0,115200n81" \
+- -initrd $TESTDIR/initramfs.server -pidfile $TESTDIR/server.pid -daemonize || return 1
++ -net nic,macaddr=52:54:00:12:34:56,model=e1000 \
++ -net socket,listen=127.0.0.1:12350 \
++ -serial $SERIAL \
++ -watchdog ib700 -watchdog-action poweroff \
++ -kernel /boot/vmlinuz-$KVERSION \
++ -append "selinux=0 root=/dev/sda rd.debug rd.info rw quiet console=ttyS0,115200n81" \
++ -initrd $TESTDIR/initramfs.server -pidfile $TESTDIR/server.pid -daemonize || return 1
+ sudo chmod 644 $TESTDIR/server.pid || return 1
+
+ # Cleanup the terminal if we have one
+@@ -50,9 +51,10 @@ client_test() {
+ -net nic,macaddr=52:54:00:12:34:$mac3,model=e1000 \
+ -net socket,connect=127.0.0.1:12350 \
+ -hdc /dev/null \
+- -kernel /boot/vmlinuz-$KVERSION \
+- -append "$cmdline $DEBUGFAIL rd.retry=5 rd.debug rd.info ro quiet console=ttyS0,115200n81 selinux=0 rd.copystate" \
+- -initrd $TESTDIR/initramfs.testing
++ -watchdog ib700 -watchdog-action poweroff \
++ -kernel /boot/vmlinuz-$KVERSION \
++ -append "$cmdline $DEBUGFAIL rd.retry=5 rd.debug rd.info ro quiet console=ttyS0,115200n81 selinux=0 rd.copystate rd.chroot init=/sbin/init" \
++ -initrd $TESTDIR/initramfs.testing
+
+ if [[ $? -ne 0 ]] || ! grep -m 1 -q OK $TESTDIR/client.img; then
+ echo "CLIENT TEST END: $test_name [FAILED - BAD EXIT]"
+@@ -261,16 +263,16 @@ test_setup() {
+
+ # Make server's dracut image
+ $basedir/dracut.sh -l -i $TESTDIR/overlay / \
+- -m "dash udev-rules base rootfs-block debug kernel-modules" \
+- -d "piix ide-gd_mod ata_piix ext3 sd_mod e1000" \
+- -f $TESTDIR/initramfs.server $KVERSION || return 1
++ -m "dash udev-rules base rootfs-block debug kernel-modules watchdog" \
++ -d "piix ide-gd_mod ata_piix ext3 sd_mod e1000 ib700wdt" \
++ -f $TESTDIR/initramfs.server $KVERSION || return 1
+
+ # Make client's dracut image
+ $basedir/dracut.sh -l -i $TESTDIR/overlay / \
+- -o "plymouth" \
+- -a "debug" \
+- -d "piix sd_mod sr_mod ata_piix ide-gd_mod e1000 nfs sunrpc" \
+- -f $TESTDIR/initramfs.testing $KVERSION || return 1
++ -o "plymouth" \
++ -a "debug watchdog" \
++ -d "piix sd_mod sr_mod ata_piix ide-gd_mod e1000 nfs sunrpc ib700wdt" \
++ -f $TESTDIR/initramfs.testing $KVERSION || return 1
+ }
+
+ kill_server() {
diff --git a/0037-TEST-20-NFS-libnss-cleanup.patch b/0037-TEST-20-NFS-libnss-cleanup.patch
new file mode 100644
index 0000000..5c3fe29
--- /dev/null
+++ b/0037-TEST-20-NFS-libnss-cleanup.patch
@@ -0,0 +1,138 @@
+From 9f88b0370dc9433b87686f67c1156f2080b35a1d Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Mon, 18 Jun 2012 19:23:25 +0200
+Subject: [PATCH] TEST-20-NFS: libnss cleanup
+
+---
+ test/TEST-20-NFS/test.sh | 75 +++++++++++++++++++++++++++++++++-------------
+ 1 file changed, 55 insertions(+), 20 deletions(-)
+
+diff --git a/test/TEST-20-NFS/test.sh b/test/TEST-20-NFS/test.sh
+index ea65c2a..faa2bb3 100755
+--- a/test/TEST-20-NFS/test.sh
++++ b/test/TEST-20-NFS/test.sh
+@@ -211,10 +211,37 @@ test_setup() {
+ mkdir $TESTDIR/mnt
+ sudo mount -o loop $TESTDIR/server.ext3 $TESTDIR/mnt
+
+- kernel=$KVERSION
+- (
++
++ export kernel=$KVERSION
++ export srcmods="/lib/modules/$kernel/"
++ # Detect lib paths
++
++ . $basedir/dracut-functions.sh
++ if ! [[ $libdirs ]] ; then
++ if strstr "$(ldd /bin/sh)" "/lib64/" &>/dev/null \
++ && [[ -d /lib64 ]]; then
++ libdirs+=" /lib64"
++ [[ -d /usr/lib64 ]] && libdirs+=" /usr/lib64"
++ else
++ libdirs+=" /lib"
++ [[ -d /usr/lib ]] && libdirs+=" /usr/lib"
++ fi
++ fi
++
++ (
+ initdir=$TESTDIR/mnt
+- . $basedir/dracut-functions.sh
++
++ for _f in modules.builtin.bin modules.builtin; do
++ [[ $srcmods/$_f ]] && break
++ done || {
++ dfatal "No modules.builtin.bin and modules.builtin found!"
++ return 1
++ }
++
++ for _f in modules.builtin.bin modules.builtin modules.order; do
++ [[ $srcmods/$_f ]] && inst_simple "$srcmods/$_f" "/lib/modules/$kernel/$_f"
++ done
++
+ dracut_install sh ls shutdown poweroff stty cat ps ln ip \
+ dmesg mkdir cp ping exportfs \
+ modprobe rpc.nfsd rpc.mountd showmount tcpdump \
+@@ -235,26 +262,28 @@ test_setup() {
+ inst ./dhcpd.conf /etc/dhcpd.conf
+ dracut_install /etc/nsswitch.conf /etc/rpc /etc/protocols
+ dracut_install rpc.idmapd /etc/idmapd.conf
+- if ldd $(type -P rpc.idmapd) |grep -q lib64; then
+- LIBDIR="/lib64"
+- else
+- LIBDIR="/lib"
+- fi
+
+- dracut_install $(ls {/usr,}$LIBDIR/libnfsidmap*.so* 2>/dev/null )
+- dracut_install $(ls {/usr,}$LIBDIR/libnss*.so 2>/dev/null)
++ inst_libdir_file 'libnfsidmap_nsswitch.so*'
++ inst_libdir_file 'libnfsidmap/*.so*'
++ inst_libdir_file 'libnfsidmap*.so*'
++
++ _nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
++ | tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
++ _nsslibs=${_nsslibs#|}
++ _nsslibs=${_nsslibs%|}
++
++ inst_libdir_file -n "$_nsslibs" 'libnss*.so*'
++
+ (
+ cd "$initdir";
+- mkdir -p dev sys proc etc var/run tmp var/lib/{dhcpd,rpcbind}
++ mkdir -p dev sys proc run etc var/run tmp var/lib/{dhcpd,rpcbind}
+ mkdir -p var/lib/nfs/{v4recovery,rpc_pipefs}
+ chmod 777 var/lib/rpcbind var/lib/nfs
+ )
+ inst /etc/nsswitch.conf /etc/nsswitch.conf
++
+ inst /etc/passwd /etc/passwd
+ inst /etc/group /etc/group
+- for i in /lib*/libnss_files**;do
+- inst_library $i
+- done
+
+ /sbin/depmod -a -b "$initdir" $kernel
+ cp -a /etc/ld.so.conf* $initdir/etc
+@@ -266,7 +295,6 @@ test_setup() {
+ mkdir -p $initdir
+
+ (
+- . $basedir/dracut-functions.sh
+ dracut_install sh shutdown poweroff stty cat ps ln ip \
+ mount dmesg mkdir cp ping grep
+ for _terminfodir in /lib/terminfo /etc/terminfo /usr/share/terminfo; do
+@@ -276,15 +304,23 @@ test_setup() {
+ inst ./client-init.sh /sbin/init
+ (
+ cd "$initdir"
+- mkdir -p dev sys proc etc
++ mkdir -p dev sys proc etc run
+ mkdir -p var/lib/nfs/rpc_pipefs
+ )
+ inst /etc/nsswitch.conf /etc/nsswitch.conf
+ inst /etc/passwd /etc/passwd
+ inst /etc/group /etc/group
+- for i in /lib*/libnss_files*;do
+- inst_library $i
+- done
++
++ inst_libdir_file 'libnfsidmap_nsswitch.so*'
++ inst_libdir_file 'libnfsidmap/*.so*'
++ inst_libdir_file 'libnfsidmap*.so*'
++
++ _nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
++ | tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
++ _nsslibs=${_nsslibs#|}
++ _nsslibs=${_nsslibs%|}
++
++ inst_libdir_file -n "$_nsslibs" 'libnss*.so*'
+
+ cp -a /etc/ld.so.conf* $initdir/etc
+ sudo ldconfig -r "$initdir"
+@@ -301,7 +337,6 @@ test_setup() {
+ (
+ initdir=$TESTDIR/overlay
+ mkdir $TESTDIR/overlay
+- . $basedir/dracut-functions.sh
+ dracut_install poweroff shutdown
+ inst_hook emergency 000 ./hard-off.sh
+ inst_simple ./99-idesymlinks.rules /etc/udev/rules.d/99-idesymlinks.rules
diff --git a/0038-TEST-50-MULTINIC-libnss-cleanup.patch b/0038-TEST-50-MULTINIC-libnss-cleanup.patch
new file mode 100644
index 0000000..607d63e
--- /dev/null
+++ b/0038-TEST-50-MULTINIC-libnss-cleanup.patch
@@ -0,0 +1,351 @@
+From d6862983155c31896ac46dc9d43f4086850a0d44 Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Mon, 18 Jun 2012 19:28:44 +0200
+Subject: [PATCH] TEST-50-MULTINIC: libnss cleanup
+
+---
+ test/TEST-50-MULTINIC/test.sh | 235 +++++++++++++++++++----------------------
+ 1 file changed, 110 insertions(+), 125 deletions(-)
+
+diff --git a/test/TEST-50-MULTINIC/test.sh b/test/TEST-50-MULTINIC/test.sh
+index 1655608..5c7ca6c 100755
+--- a/test/TEST-50-MULTINIC/test.sh
++++ b/test/TEST-50-MULTINIC/test.sh
+@@ -1,4 +1,6 @@
+ #!/bin/bash
++# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
++# ex: ts=8 sw=4 sts=4 et filetype=sh
+ TEST_DESCRIPTION="root filesystem on NFS with multiple nics"
+
+ KVERSION=${KVERSION-$(uname -r)}
+@@ -41,15 +43,15 @@ client_test() {
+
+ # Need this so kvm-qemu will boot (needs non-/dev/zero local disk)
+ if ! dd if=/dev/zero of=$TESTDIR/client.img bs=1M count=1; then
+- echo "Unable to make client sda image" 1>&2
+- return 1
++ echo "Unable to make client sda image" 1>&2
++ return 1
+ fi
+
+ $testdir/run-qemu -hda $TESTDIR/client.img -m 512M -nographic \
+- -net nic,macaddr=52:54:00:12:34:$mac1,model=e1000 \
+- -net nic,macaddr=52:54:00:12:34:$mac2,model=e1000 \
+- -net nic,macaddr=52:54:00:12:34:$mac3,model=e1000 \
+- -net socket,connect=127.0.0.1:12350 \
++ -net nic,macaddr=52:54:00:12:34:$mac1,model=e1000 \
++ -net nic,macaddr=52:54:00:12:34:$mac2,model=e1000 \
++ -net nic,macaddr=52:54:00:12:34:$mac3,model=e1000 \
++ -net socket,connect=127.0.0.1:12350 \
+ -hdc /dev/null \
+ -watchdog ib700 -watchdog-action poweroff \
+ -kernel /boot/vmlinuz-$KVERSION \
+@@ -57,17 +59,17 @@ client_test() {
+ -initrd $TESTDIR/initramfs.testing
+
+ if [[ $? -ne 0 ]] || ! grep -m 1 -q OK $TESTDIR/client.img; then
+- echo "CLIENT TEST END: $test_name [FAILED - BAD EXIT]"
+- return 1
++ echo "CLIENT TEST END: $test_name [FAILED - BAD EXIT]"
++ return 1
+ fi
+
+
+ for i in $check ; do
+- echo $i
+- if ! grep -m 1 -q $i $TESTDIR/client.img; then
+- echo "CLIENT TEST END: $test_name [FAILED - BAD IF]"
+- return 1
+- fi
++ echo $i
++ if ! grep -m 1 -q $i $TESTDIR/client.img; then
++ echo "CLIENT TEST END: $test_name [FAILED - BAD IF]"
++ return 1
++ fi
+ done
+
+ echo "CLIENT TEST END: $test_name [OK]"
+@@ -77,8 +79,8 @@ client_test() {
+
+ test_run() {
+ if ! run_server; then
+- echo "Failed to start server" 1>&2
+- return 1
++ echo "Failed to start server" 1>&2
++ return 1
+ fi
+ test_client || { kill_server; return 1; }
+ }
+@@ -90,33 +92,33 @@ test_client() {
+
+ # PXE Style BOOTIF=
+ client_test "MULTINIC root=nfs BOOTIF=" \
+- 00 01 02 \
+- "root=nfs:192.168.50.1:/nfs/client BOOTIF=52-54-00-12-34-00" \
+- "eth0" || return 1
++ 00 01 02 \
++ "root=nfs:192.168.50.1:/nfs/client BOOTIF=52-54-00-12-34-00" \
++ "eth0" || return 1
+
+ # PXE Style BOOTIF= with dhcp root-path
+ client_test "MULTINIC root=dhcp BOOTIF=" \
+- 00 01 02 \
+- "root=dhcp BOOTIF=52-54-00-12-34-02" \
+- "eth2" || return 1
++ 00 01 02 \
++ "root=dhcp BOOTIF=52-54-00-12-34-02" \
++ "eth2" || return 1
+
+ # Multinic case, where only one nic works
+ client_test "MULTINIC root=nfs ip=dhcp" \
+- FF 00 FE \
+- "root=nfs:192.168.50.1:/nfs/client ip=dhcp" \
+- "eth1" || return 1
++ FF 00 FE \
++ "root=nfs:192.168.50.1:/nfs/client ip=dhcp" \
++ "eth1" || return 1
+
+ # Require two interfaces
+ client_test "MULTINIC root=nfs ip=eth1:dhcp ip=eth2:dhcp bootdev=eth1" \
+- 00 01 02 \
+- "root=nfs:192.168.50.1:/nfs/client ip=eth1:dhcp ip=eth2:dhcp bootdev=eth1" \
+- "eth1 eth2" || return 1
++ 00 01 02 \
++ "root=nfs:192.168.50.1:/nfs/client ip=eth1:dhcp ip=eth2:dhcp bootdev=eth1" \
++ "eth1 eth2" || return 1
+
+ # Require three interfaces with dhcp root-path
+ client_test "MULTINIC root=dhcp ip=eth0:dhcp ip=eth1:dhcp ip=eth2:dhcp bootdev=eth2" \
+- 00 01 02 \
+- "root=dhcp ip=eth0:dhcp ip=eth1:dhcp ip=eth2:dhcp bootdev=eth2" \
+- "eth0 eth1 eth2" || return 1
++ 00 01 02 \
++ "root=dhcp ip=eth0:dhcp ip=eth1:dhcp ip=eth2:dhcp bootdev=eth2" \
++ "eth0 eth1 eth2" || return 1
+
+ kill_server
+ return 0
+@@ -129,86 +131,70 @@ test_setup() {
+ mkdir $TESTDIR/mnt
+ sudo mount -o loop $TESTDIR/server.ext3 $TESTDIR/mnt
+
+- export kernel=$KVERSION
+- export srcmods="/lib/modules/$kernel/"
+- # Detect lib paths
+-
+ . $basedir/dracut-functions.sh
+- if ! [[ $libdirs ]] ; then
+- if strstr "$(ldd /bin/sh)" "/lib64/" &>/dev/null \
+- && [[ -d /lib64 ]]; then
+- libdirs+=" /lib64"
+- [[ -d /usr/lib64 ]] && libdirs+=" /usr/lib64"
+- else
+- libdirs+=" /lib"
+- [[ -d /usr/lib ]] && libdirs+=" /usr/lib"
+- fi
+- fi
+
+ (
+- initdir=$TESTDIR/mnt
+-
+- for _f in modules.builtin.bin modules.builtin; do
+- [[ $srcmods/$_f ]] && break
+- done || {
+- dfatal "No modules.builtin.bin and modules.builtin found!"
+- return 1
+- }
++ initdir=$TESTDIR/mnt
++
++ (
++ cd "$initdir";
++ mkdir -p dev sys proc run etc var/run tmp var/lib/{dhcpd,rpcbind}
++ mkdir -p var/lib/nfs/{v4recovery,rpc_pipefs}
++ chmod 777 var/lib/rpcbind var/lib/nfs
++ )
++
++ for _f in modules.builtin.bin modules.builtin; do
++ [[ $srcmods/$_f ]] && break
++ done || {
++ dfatal "No modules.builtin.bin and modules.builtin found!"
++ return 1
++ }
+
+ for _f in modules.builtin.bin modules.builtin modules.order; do
+- [[ $srcmods/$_f ]] && inst_simple "$srcmods/$_f" "/lib/modules/$kernel/$_f"
+- done
++ [[ $srcmods/$_f ]] && inst_simple "$srcmods/$_f" "/lib/modules/$kernel/$_f"
++ done
+
+- dracut_install sh ls shutdown poweroff stty cat ps ln ip \
+- dmesg mkdir cp ping exportfs \
+- modprobe rpc.nfsd rpc.mountd showmount tcpdump \
+- /etc/services sleep mount chmod
++ dracut_install sh ls shutdown poweroff stty cat ps ln ip \
++ dmesg mkdir cp ping exportfs \
++ modprobe rpc.nfsd rpc.mountd showmount tcpdump \
++ /etc/services sleep mount chmod
+ for _terminfodir in /lib/terminfo /etc/terminfo /usr/share/terminfo; do
+- [ -f ${_terminfodir}/l/linux ] && break
+- done
+- dracut_install -o ${_terminfodir}/l/linux
+- type -P portmap >/dev/null && dracut_install portmap
+- type -P rpcbind >/dev/null && dracut_install rpcbind
+- [ -f /etc/netconfig ] && dracut_install /etc/netconfig
+- type -P dhcpd >/dev/null && dracut_install dhcpd
+- [ -x /usr/sbin/dhcpd3 ] && inst /usr/sbin/dhcpd3 /usr/sbin/dhcpd
+- instmods nfsd sunrpc ipv6 lockd
+- inst ./server-init.sh /sbin/init
+- inst ./hosts /etc/hosts
+- inst ./exports /etc/exports
+- inst ./dhcpd.conf /etc/dhcpd.conf
+- dracut_install /etc/nsswitch.conf /etc/rpc /etc/protocols
+- dracut_install rpc.idmapd /etc/idmapd.conf
+-
+- inst_libdir_file 'libnfsidmap_nsswitch.so*'
+- inst_libdir_file 'libnfsidmap/*.so*'
+- inst_libdir_file 'libnfsidmap*.so*'
++ [ -f ${_terminfodir}/l/linux ] && break
++ done
++ dracut_install -o ${_terminfodir}/l/linux
++ type -P portmap >/dev/null && dracut_install portmap
++ type -P rpcbind >/dev/null && dracut_install rpcbind
++ [ -f /etc/netconfig ] && dracut_install /etc/netconfig
++ type -P dhcpd >/dev/null && dracut_install dhcpd
++ [ -x /usr/sbin/dhcpd3 ] && inst /usr/sbin/dhcpd3 /usr/sbin/dhcpd
++ instmods nfsd sunrpc ipv6 lockd
++ inst ./server-init.sh /sbin/init
++ inst ./hosts /etc/hosts
++ inst ./exports /etc/exports
++ inst ./dhcpd.conf /etc/dhcpd.conf
++ dracut_install /etc/nsswitch.conf /etc/rpc /etc/protocols
++
++ dracut_install rpc.idmapd /etc/idmapd.conf
++
++ inst_libdir_file 'libnfsidmap_nsswitch.so*'
++ inst_libdir_file 'libnfsidmap/*.so*'
++ inst_libdir_file 'libnfsidmap*.so*'
+
+ _nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
+- | tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
++ | tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
+ _nsslibs=${_nsslibs#|}
+ _nsslibs=${_nsslibs%|}
+
+- inst_libdir_file -n "$_nsslibs" 'libnss*.so*'
++ inst_libdir_file -n "$_nsslibs" 'libnss*.so*'
+
+- (
+- cd "$initdir";
+- mkdir -p dev sys proc etc var/run tmp var/lib/{dhcpd,rpcbind}
+- mkdir -p var/lib/nfs/{v4recovery,rpc_pipefs}
+- chmod 777 var/lib/rpcbind var/lib/nfs
+- )
++ inst /etc/nsswitch.conf /etc/nsswitch.conf
++ inst /etc/passwd /etc/passwd
++ inst /etc/group /etc/group
+
+- inst /etc/nsswitch.conf /etc/nsswitch.conf
+- inst /etc/passwd /etc/passwd
+- inst /etc/group /etc/group
+- for i in /lib*/libnss_files**;do
+- inst_library $i
+- done
++ /sbin/depmod -a -b "$initdir" $kernel
+
+- /sbin/depmod -a -b "$initdir" $kernel
+-
+- cp -a /etc/ld.so.conf* $initdir/etc
+- sudo ldconfig -r "$initdir"
++ cp -a /etc/ld.so.conf* $initdir/etc
++ sudo ldconfig -r "$initdir"
+ )
+
+ # Make client root inside server root
+@@ -216,49 +202,48 @@ test_setup() {
+ mkdir -p $initdir
+
+ (
+- dracut_install sh shutdown poweroff stty cat ps ln ip \
++ dracut_install sh shutdown poweroff stty cat ps ln ip \
+ mount dmesg mkdir cp ping grep ls
+ for _terminfodir in /lib/terminfo /etc/terminfo /usr/share/terminfo; do
+- [ -f ${_terminfodir}/l/linux ] && break
+- done
+- dracut_install -o ${_terminfodir}/l/linux
+- inst ./client-init.sh /sbin/init
+- (
+- cd "$initdir"
+- mkdir -p dev sys proc etc run
+- mkdir -p var/lib/nfs/rpc_pipefs
+- )
+- inst /etc/nsswitch.conf /etc/nsswitch.conf
+- inst /etc/passwd /etc/passwd
+- inst /etc/group /etc/group
+-
+- inst_libdir_file 'libnfsidmap_nsswitch.so*'
+- inst_libdir_file 'libnfsidmap/*.so*'
+- inst_libdir_file 'libnfsidmap*.so*'
++ [ -f ${_terminfodir}/l/linux ] && break
++ done
++ dracut_install -o ${_terminfodir}/l/linux
++ inst ./client-init.sh /sbin/init
++ (
++ cd "$initdir"
++ mkdir -p dev sys proc etc run
++ mkdir -p var/lib/nfs/rpc_pipefs
++ )
++ inst /etc/nsswitch.conf /etc/nsswitch.conf
++ inst /etc/passwd /etc/passwd
++ inst /etc/group /etc/group
++
++ dracut_install rpc.idmapd /etc/idmapd.conf
++ inst_libdir_file 'libnfsidmap_nsswitch.so*'
++ inst_libdir_file 'libnfsidmap/*.so*'
++ inst_libdir_file 'libnfsidmap*.so*'
+
+ _nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
+- | tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
++ | tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
+ _nsslibs=${_nsslibs#|}
+ _nsslibs=${_nsslibs%|}
+
+- inst_libdir_file -n "$_nsslibs" 'libnss*.so*'
++ inst_libdir_file -n "$_nsslibs" 'libnss*.so*'
+
+- cp -a /etc/ld.so.conf* $initdir/etc
+- sudo ldconfig -r "$initdir"
++ cp -a /etc/ld.so.conf* $initdir/etc
++ sudo ldconfig -r "$initdir"
+ )
+
+- chroot $initdir
+-
+ sudo umount $TESTDIR/mnt
+ rm -fr $TESTDIR/mnt
+
+ # Make an overlay with needed tools for the test harness
+ (
+- initdir=$TESTDIR/overlay
+- mkdir $TESTDIR/overlay
+- dracut_install poweroff shutdown
+- inst_hook emergency 000 ./hard-off.sh
+- inst_simple ./99-idesymlinks.rules /etc/udev/rules.d/99-idesymlinks.rules
++ initdir=$TESTDIR/overlay
++ mkdir $TESTDIR/overlay
++ dracut_install poweroff shutdown
++ inst_hook emergency 000 ./hard-off.sh
++ inst_simple ./99-idesymlinks.rules /etc/udev/rules.d/99-idesymlinks.rules
+ )
+
+ # Make server's dracut image
+@@ -277,8 +262,8 @@ test_setup() {
+
+ kill_server() {
+ if [[ -s $TESTDIR/server.pid ]]; then
+- sudo kill -TERM $(cat $TESTDIR/server.pid)
+- rm -f $TESTDIR/server.pid
++ sudo kill -TERM $(cat $TESTDIR/server.pid)
++ rm -f $TESTDIR/server.pid
+ fi
+ }
+
diff --git a/0039-disable-TEST-16-DMSQUASH-for-now.patch b/0039-disable-TEST-16-DMSQUASH-for-now.patch
new file mode 100644
index 0000000..ebefab6
--- /dev/null
+++ b/0039-disable-TEST-16-DMSQUASH-for-now.patch
@@ -0,0 +1,22 @@
+From f48f9341a5a5b7f4e14d4419ce7f969e665d9c42 Mon Sep 17 00:00:00 2001
+From: Harald Hoyer <harald@redhat.com>
+Date: Mon, 18 Jun 2012 19:20:39 +0200
+Subject: [PATCH] disable TEST-16-DMSQUASH for now
+
+---
+ test/TEST-16-DMSQUASH/test.sh | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/test/TEST-16-DMSQUASH/test.sh b/test/TEST-16-DMSQUASH/test.sh
+index 9a10058..3816c18 100755
+--- a/test/TEST-16-DMSQUASH/test.sh
++++ b/test/TEST-16-DMSQUASH/test.sh
+@@ -11,7 +11,7 @@ test_check() {
+ echo "python-imgcreate not installed"
+ return 1
+ fi
+- return 0
++ return 1
+ }
+
+ test_run() {
diff --git a/dracut.spec b/dracut.spec
index e1d9bca..b497276 100644
--- a/dracut.spec
+++ b/dracut.spec
@@ -10,7 +10,7 @@
Name: dracut
Version: 019
-Release: 16.git20120611%{?dist}
+Release: 40.git20120618%{?dist}
Summary: Initramfs generator using udev
%if 0%{?fedora} || 0%{?rhel}
@@ -39,6 +39,30 @@ Patch12: 0012-dracut.sh-mkdir-of-libdirs-at-then-end.patch
Patch13: 0013-dm-check-for-presence-of-dmsetup.patch
Patch14: 0014-mdraid-md-shutdown.sh-check-for-presence-of-mdadm.patch
Patch15: 0015-network-ifup.sh-default-to-dhcp-for-BOOTIF.patch
+Patch16: 0016-dracut.sh-mkdir-initdir-lib-dracut.patch
+Patch17: 0017-fix-ifup-for-static-ipv6.patch
+Patch18: 0018-ifcfg-fix-output-for-ipv6-static-addressing.patch
+Patch19: 0019-add-PARTUUID-as-root-PARTUUID-partition-uuid-paramet.patch
+Patch20: 0020-Debian-multiarch-support.patch
+Patch21: 0021-dracut-functions.sh-fixup-inst_libdir_file-again.patch
+Patch22: 0022-dracut.sh-output-unknown-argument.patch
+Patch23: 0023-dracut.sh-unset-some-variables.patch
+Patch24: 0024-nfs-extend-libnss-wildcard.patch
+Patch25: 0025-TEST-50-MULTINIC-install-correct-nss-libs.patch
+Patch26: 0026-Revert-network-ifup.sh-default-to-dhcp-for-BOOTIF.patch
+Patch27: 0027-Revert-network-ifup.sh-do-not-default-to-dhcp-for-in.patch
+Patch28: 0028-resolve-conflict-between-cms-network-rules-and-defau.patch
+Patch29: 0029-fixed-instmods-return-code-and-set-pipefail-globally.patch
+Patch30: 0030-Set-some-global-variables-in-dracut-functions.sh.patch
+Patch31: 0031-iscsi-module-setup.sh-only-install-s390-driver-on-s3.patch
+Patch32: 0032-plymouth-fixed-inst_libdir_file-call.patch
+Patch33: 0033-add-04watchdog-dracut-module.patch
+Patch34: 0034-TEST-01-BASIC-add-watchdog.patch
+Patch35: 0035-TEST-20-NFS-add-watchdog.patch
+Patch36: 0036-TEST-50-MULTINIC-add-watchdog.patch
+Patch37: 0037-TEST-20-NFS-libnss-cleanup.patch
+Patch38: 0038-TEST-50-MULTINIC-libnss-cleanup.patch
+Patch39: 0039-disable-TEST-16-DMSQUASH-for-now.patch
BuildArch: noarch
@@ -270,6 +294,7 @@ rm -rf $RPM_BUILD_ROOT
%{_mandir}/man5/dracut.conf.5*
%{dracutlibdir}/modules.d/00bootchart
%{dracutlibdir}/modules.d/00dash
+%{dracutlibdir}/modules.d/04watchdog
%{dracutlibdir}/modules.d/05busybox
%{dracutlibdir}/modules.d/10i18n
%{dracutlibdir}/modules.d/30convertfs
@@ -358,6 +383,9 @@ rm -rf $RPM_BUILD_ROOT
%dir /var/lib/dracut/overlay
%changelog
+* Mon Jun 18 2012 Harald Hoyer <harald@redhat.com> 019-40.git20120618
+- new upstream version
+
* Mon Jun 11 2012 Harald Hoyer <harald@redhat.com> 019-16.git20120611
- new upstream version