diff --git a/SOURCES/0209.patch b/SOURCES/0209.patch
new file mode 100644
index 0000000..263d09e
--- /dev/null
+++ b/SOURCES/0209.patch
@@ -0,0 +1,66 @@
+From 7e148e3b6f922e5eb1dcb7fc3c1fed715004e2ab Mon Sep 17 00:00:00 2001
+From: Lee Duncan <lduncan@suse.com>
+Date: Mon, 25 Mar 2019 16:49:19 -0700
+Subject: [PATCH] Dracut: only login to one target at a time
+
+For handling the configuration where there are two
+paths to an iscsi root target, each using a different
+NIC. In such a case, the initramfs was trying to configure
+the first NIC, then call iscsiroot to login to both targets,
+which would fail for the 2nd target, since the path to the
+2nd target was not yet configured. This would eventually
+work after a timeout. But it's better to login to just
+one target at a time.
+This change makes the initramfs handle multiple paths to an
+iscsi target better by logging into only one target at a time,
+rather than trying to login to all targets when only one of
+several NICs is up.
+
+This can be further optimized by using the initrd parameter
+"rd.iscsi.testroute", which would skip iscsiadm login attempts
+for targets to which no route exists.
+
+If the script is called again via the timeout initqueue,
+we try "iscsiadm -L onboot" again, hoping that some targets
+may now have become reachable.
+---
+ modules.d/95iscsi/iscsiroot.sh | 12 +++++++++---
+ 1 file changed, 9 insertions(+), 3 deletions(-)
+
+diff --git a/modules.d/95iscsi/iscsiroot.sh b/modules.d/95iscsi/iscsiroot.sh
+index 4efc1d12..f3f88259 100755
+--- a/modules.d/95iscsi/iscsiroot.sh
++++ b/modules.d/95iscsi/iscsiroot.sh
+@@ -228,7 +228,7 @@ handle_netroot()
+ fi
+ [ -n "$iscsi_param" ] && for param in $iscsi_param; do EXTRA="$EXTRA --name=${param%=*} --value=${param#*=}"; done
+
+- iscsiadm -m node -T $target \
++ CMD="iscsiadm -m node -T $target \
+ ${iscsi_iface_name:+-I $iscsi_iface_name} \
+ -p $iscsi_target_ip${iscsi_target_port:+:$iscsi_target_port} \
+ --op=update \
+@@ -238,14 +238,20 @@ handle_netroot()
+ ${iscsi_in_username:+--name=node.session.auth.username_in --value=$iscsi_in_username} \
+ ${iscsi_in_password:+--name=node.session.auth.password_in --value=$iscsi_in_password} \
+ $EXTRA \
+- $NULL
++ $NULL"
++ $CMD
++ if [ "$netif" != "timeout" ]; then
++ $CMD --login
++ fi
+ ;;
+ *)
+ ;;
+ esac
+ done
+
+- iscsiadm -m node -L onboot || :
++ if [ "$netif" = "timeout" ]; then
++ iscsiadm -m node -L onboot || :
++ fi
+ > $hookdir/initqueue/work
+
+ netroot_enc=$(str_replace "$1" '/' '\2f')
+
diff --git a/SOURCES/0210.patch b/SOURCES/0210.patch
new file mode 100644
index 0000000..ba85405
--- /dev/null
+++ b/SOURCES/0210.patch
@@ -0,0 +1,39 @@
+From 96fc660c9170fbea5ac80235ab7d0e7cfdbe243e Mon Sep 17 00:00:00 2001
+From: Martin Wilck <mwilck@suse.de>
+Date: Thu, 21 Mar 2019 16:27:04 +0100
+Subject: [PATCH] iscsi: don't continue waiting if the root device is present
+
+dracut waits for every iscsiroot connection to be established
+before switching root. This is not necessary in multipath scenarios,
+where a single path is usually sufficient to set up the root device,
+and where users expect booting to succeed unless all paths are down.
+
+Don't wait for the iscsi portal to start if the root device has
+already been found.
+---
+ modules.d/95iscsi/parse-iscsiroot.sh | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/modules.d/95iscsi/parse-iscsiroot.sh b/modules.d/95iscsi/parse-iscsiroot.sh
+index f00a83bb..8d6e3e8c 100755
+--- a/modules.d/95iscsi/parse-iscsiroot.sh
++++ b/modules.d/95iscsi/parse-iscsiroot.sh
+@@ -84,7 +84,7 @@ if [ -n "$iscsi_firmware" ]; then
+ modprobe -b -q iscsi_boot_sysfs 2>/dev/null
+ modprobe -b -q iscsi_ibft
+ # if no ip= is given, but firmware
+- echo "[ -f '/tmp/iscsistarted-firmware' ]" > $hookdir/initqueue/finished/iscsi_started.sh
++ echo "${DRACUT_SYSTEMD+systemctl is-active initrd-root-device.target || }[ -f '/tmp/iscsistarted-firmware' ]" > $hookdir/initqueue/finished/iscsi_started.sh
+ initqueue --unique --online /sbin/iscsiroot online "iscsi:" "$NEWROOT"
+ initqueue --unique --onetime --timeout /sbin/iscsiroot timeout "iscsi:" "$NEWROOT"
+ initqueue --unique --onetime --settled /sbin/iscsiroot online "iscsi:" "'$NEWROOT'"
+@@ -145,7 +145,7 @@ for nroot in $(getargs netroot); do
+ type parse_iscsi_root >/dev/null 2>&1 || . /lib/net-lib.sh
+ parse_iscsi_root "$nroot" || return 1
+ netroot_enc=$(str_replace "$nroot" '/' '\2f')
+- echo "[ -f '/tmp/iscsistarted-$netroot_enc' ]" > $hookdir/initqueue/finished/iscsi_started.sh
++ echo "${DRACUT_SYSTEMD+systemctl is-active initrd-root-device.target || }[ -f '/tmp/iscsistarted-$netroot_enc' ]" > $hookdir/initqueue/finished/iscsi_started.sh
+ done
+
+ # Done, all good!
+
diff --git a/SOURCES/0211.patch b/SOURCES/0211.patch
new file mode 100644
index 0000000..59fe258
--- /dev/null
+++ b/SOURCES/0211.patch
@@ -0,0 +1,24 @@
+From 5e06ab6cc6398fb82b8cd1dbc8da9969d874bb75 Mon Sep 17 00:00:00 2001
+From: Martin Wilck <mwilck@suse.de>
+Date: Thu, 21 Mar 2019 21:31:15 +0100
+Subject: [PATCH] network: stop waiting for interfaces if root device is
+ present
+
+---
+ modules.d/35network-legacy/net-genrules.sh | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/modules.d/35network-legacy/net-genrules.sh b/modules.d/35network-legacy/net-genrules.sh
+index e6035e5e..0d4ef27b 100755
+--- a/modules.d/35network-legacy/net-genrules.sh
++++ b/modules.d/35network-legacy/net-genrules.sh
+@@ -96,7 +96,7 @@ command -v fix_bootif >/dev/null || . /lib/net-lib.sh
+
+ for iface in $IFACES; do
+ if [ "$bootdev" = "$iface" ] || [ "$NEEDNET" = "1" ]; then
+- echo "[ -f /tmp/net.${iface}.did-setup ]" >$hookdir/initqueue/finished/wait-$iface.sh
++ echo "${DRACUT_SYSTEMD+systemctl is-active initrd-root-device.target || }[ -f /tmp/net.${iface}.did-setup ]" >$hookdir/initqueue/finished/wait-$iface.sh
+ fi
+ done
+ # Default: We don't know the interface to use, handle all
+
diff --git a/SOURCES/0212.patch b/SOURCES/0212.patch
new file mode 100644
index 0000000..d3dc6de
--- /dev/null
+++ b/SOURCES/0212.patch
@@ -0,0 +1,39 @@
+From 032129d0eb47d08eff7bd8b4c82a835a8929e9d3 Mon Sep 17 00:00:00 2001
+From: Martin Wilck <mwilck@suse.de>
+Date: Thu, 4 Apr 2019 15:29:04 +0200
+Subject: [PATCH] iscsiroot: parse_iscsi_root overwrites command line args
+
+iscsi_target_name, iscsi_target_ip, iscsi_target_port are
+unconditionally overwritten by parse_iscsi_root. Don't set
+them here, for code clarity.
+---
+ modules.d/95iscsi/iscsiroot.sh | 8 ++------
+ 1 file changed, 2 insertions(+), 6 deletions(-)
+
+diff --git a/modules.d/95iscsi/iscsiroot.sh b/modules.d/95iscsi/iscsiroot.sh
+index f3f88259..45db89c1 100755
+--- a/modules.d/95iscsi/iscsiroot.sh
++++ b/modules.d/95iscsi/iscsiroot.sh
+@@ -92,12 +92,6 @@ handle_netroot()
+ # override conf settings by command line options
+ arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=)
+ [ -n "$arg" ] && iscsi_initiator=$arg
+- arg=$(getargs rd.iscsi.target.name -d iscsi_target_name=)
+- [ -n "$arg" ] && iscsi_target_name=$arg
+- arg=$(getarg rd.iscsi.target.ip -d iscsi_target_ip)
+- [ -n "$arg" ] && iscsi_target_ip=$arg
+- arg=$(getarg rd.iscsi.target.port -d iscsi_target_port=)
+- [ -n "$arg" ] && iscsi_target_port=$arg
+ arg=$(getarg rd.iscsi.target.group -d iscsi_target_group=)
+ [ -n "$arg" ] && iscsi_target_group=$arg
+ arg=$(getarg rd.iscsi.username -d iscsi_username=)
+@@ -112,6 +106,8 @@ handle_netroot()
+ iscsi_param="$iscsi_param $p"
+ done
+
++ # this sets iscsi_target_name and possibly overwrites most
++ # parameters read from the command line above
+ parse_iscsi_root "$1" || return 1
+
+ # Bail out early, if there is no route to the destination
+
diff --git a/SOURCES/0213.patch b/SOURCES/0213.patch
new file mode 100644
index 0000000..ae02bfa
--- /dev/null
+++ b/SOURCES/0213.patch
@@ -0,0 +1,42 @@
+From a590dfb3670a68b9eebc3e0ea617c5cf192c51ae Mon Sep 17 00:00:00 2001
+From: Martin Wilck <mwilck@suse.de>
+Date: Thu, 4 Apr 2019 15:40:14 +0200
+Subject: [PATCH] iscsiroot: there's never more than one target per call
+
+iscsi_target_name is set by iscsi_root, and thus can't have
+more than one member. This allows us to get rid of one bashism
+in iscsiroot.sh.
+---
+ modules.d/95iscsi/iscsiroot.sh | 11 +++--------
+ 1 file changed, 3 insertions(+), 8 deletions(-)
+
+diff --git a/modules.d/95iscsi/iscsiroot.sh b/modules.d/95iscsi/iscsiroot.sh
+index 45db89c1..a334b76e 100755
+--- a/modules.d/95iscsi/iscsiroot.sh
++++ b/modules.d/95iscsi/iscsiroot.sh
+@@ -213,10 +213,8 @@ handle_netroot()
+ targets=$(iscsiadm -m discovery -t st -p $iscsi_target_ip:${iscsi_target_port:+$iscsi_target_port} | sed 's/^.*iqn/iqn/')
+ [ -z "$targets" ] && echo "Target discovery to $iscsi_target_ip:${iscsi_target_port:+$iscsi_target_port} failed with status $?" && exit 1
+
+- for target in $iscsi_target_name; do
+- case "$targets" in
+- *$target*)
+- EXTRA=""
++ for target in $targets; do
++ if [ "$target" = "$iscsi_target_name" ]; then
+ if [ -n "$iscsi_iface_name" ]; then
+ iscsiadm -m iface -I $iscsi_iface_name --op=new
+ EXTRA=" ${iscsi_netdev_name:+--name=iface.net_ifacename --value=$iscsi_netdev_name} "
+@@ -239,10 +237,7 @@ handle_netroot()
+ if [ "$netif" != "timeout" ]; then
+ $CMD --login
+ fi
+- ;;
+- *)
+- ;;
+- esac
++ fi
+ done
+
+ if [ "$netif" = "timeout" ]; then
+
diff --git a/SOURCES/0214.patch b/SOURCES/0214.patch
new file mode 100644
index 0000000..5a5df3a
--- /dev/null
+++ b/SOURCES/0214.patch
@@ -0,0 +1,55 @@
+From 261d278332e0af85a0311a75d7b81c6cf35e4816 Mon Sep 17 00:00:00 2001
+From: Martin Wilck <mwilck@suse.de>
+Date: Thu, 4 Apr 2019 16:16:40 +0200
+Subject: [PATCH] iscsiroot: try targets only once
+
+In multipath scenarios, "iscsiadm -m node" may contain
+several records with the same target.
+There's no point in trying "iscsiadm --login" multiple
+time for the same target, through the same portal.
+
+Moreover, warn if the desired target is not on the node
+list.
+---
+ modules.d/95iscsi/iscsiroot.sh | 8 +++++++-
+ 1 file changed, 7 insertions(+), 1 deletion(-)
+
+diff --git a/modules.d/95iscsi/iscsiroot.sh b/modules.d/95iscsi/iscsiroot.sh
+index a334b76e..e8e0b4b8 100755
+--- a/modules.d/95iscsi/iscsiroot.sh
++++ b/modules.d/95iscsi/iscsiroot.sh
+@@ -87,7 +87,7 @@ handle_netroot()
+ local iscsi_in_username iscsi_in_password
+ local iscsi_iface_name iscsi_netdev_name
+ local iscsi_param param
+- local p
++ local p found
+
+ # override conf settings by command line options
+ arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=)
+@@ -213,6 +213,7 @@ handle_netroot()
+ targets=$(iscsiadm -m discovery -t st -p $iscsi_target_ip:${iscsi_target_port:+$iscsi_target_port} | sed 's/^.*iqn/iqn/')
+ [ -z "$targets" ] && echo "Target discovery to $iscsi_target_ip:${iscsi_target_port:+$iscsi_target_port} failed with status $?" && exit 1
+
++ found=
+ for target in $targets; do
+ if [ "$target" = "$iscsi_target_name" ]; then
+ if [ -n "$iscsi_iface_name" ]; then
+@@ -237,11 +238,16 @@ handle_netroot()
+ if [ "$netif" != "timeout" ]; then
+ $CMD --login
+ fi
++ found=yes
++ break
+ fi
+ done
+
+ if [ "$netif" = "timeout" ]; then
+ iscsiadm -m node -L onboot || :
++ elif [ "$found" != yes ]; then
++ warn "iSCSI target \"$iscsi_target_name\" not found on portal $iscsi_target_ip:$iscsi_target_port"
++ return 1
+ fi
+ > $hookdir/initqueue/work
+
+
diff --git a/SOURCES/0215.patch b/SOURCES/0215.patch
new file mode 100644
index 0000000..496a7ac
--- /dev/null
+++ b/SOURCES/0215.patch
@@ -0,0 +1,77 @@
+From 0df65c3c001fb5656838274b172c247c41dc0442 Mon Sep 17 00:00:00 2001
+From: Martin Wilck <mwilck@suse.de>
+Date: Thu, 4 Apr 2019 17:12:07 +0200
+Subject: [PATCH] iscsiroot: remove bashisms
+
+According to the dracut README, module code to be run in
+the initrd must be POSIX-compliant. Replace remaining
+bashisms (as reported by checkbashisms) with POSIX compliant
+code.
+
+The use of "type" is not strictly POSIX compliant, but it's
+all over the place in dracut code. dash supports it, anyway.
+---
+ modules.d/95iscsi/iscsiroot.sh | 26 +++++++++++++-------------
+ 1 file changed, 13 insertions(+), 13 deletions(-)
+
+diff --git a/modules.d/95iscsi/iscsiroot.sh b/modules.d/95iscsi/iscsiroot.sh
+index e8e0b4b8..4ab0b6a0 100755
+--- a/modules.d/95iscsi/iscsiroot.sh
++++ b/modules.d/95iscsi/iscsiroot.sh
+@@ -54,11 +54,11 @@ handle_firmware()
+ if ! iscsiadm -m fw; then
+ warn "iscsiadm: Could not get list of targets from firmware."
+ else
+- ifaces=( $(echo /sys/firmware/ibft/ethernet*) )
++ ifaces=$(set -- /sys/firmware/ibft/ethernet*; echo $#)
+ retry=$(cat /tmp/session-retry)
+
+- if [ $retry -lt ${#ifaces[*]} ]; then
+- let retry++
++ if [ $retry -lt $ifaces ]; then
++ retry=$((retry+1))
+ echo $retry > /tmp/session-retry
+ return 1
+ else
+@@ -88,6 +88,7 @@ handle_netroot()
+ local iscsi_iface_name iscsi_netdev_name
+ local iscsi_param param
+ local p found
++ local login_retry_max_seen=
+
+ # override conf settings by command line options
+ arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=)
+@@ -103,7 +104,9 @@ handle_netroot()
+ arg=$(getarg rd.iscsi.in.password -d iscsi_in_password=)
+ [ -n "$arg" ] && iscsi_in_password=$arg
+ for p in $(getargs rd.iscsi.param -d iscsi_param); do
+- iscsi_param="$iscsi_param $p"
++ [ "${p%=*}" = node.session.initial_login_retry_max ] && \
++ login_retry_max_seen=yes
++ iscsi_param="$iscsi_param $p"
+ done
+
+ # this sets iscsi_target_name and possibly overwrites most
+@@ -116,15 +119,12 @@ handle_netroot()
+ fi
+
+ #limit iscsistart login retries
+- case "$iscsi_param" in
+- *node.session.initial_login_retry_max*) ;;
+- *)
+- retries=$(getargnum 3 0 10000 rd.iscsi.login_retry_max)
+- if [ $retries -gt 0 ]; then
+- iscsi_param="${iscsi_param% } node.session.initial_login_retry_max=$retries"
+- fi
+- ;;
+- esac
++ if [ "$login_retry_max_seen" != yes ]; then
++ retries=$(getargnum 3 0 10000 rd.iscsi.login_retry_max)
++ if [ $retries -gt 0 ]; then
++ iscsi_param="${iscsi_param% } node.session.initial_login_retry_max=$retries"
++ fi
++ fi
+
+ # XXX is this needed?
+ getarg ro && iscsirw=ro
+
diff --git a/SOURCES/0216.patch b/SOURCES/0216.patch
new file mode 100644
index 0000000..3e51ddb
--- /dev/null
+++ b/SOURCES/0216.patch
@@ -0,0 +1,44 @@
+From ee0bba8d350920b8beb4c0629262ec359983ad65 Mon Sep 17 00:00:00 2001
+From: Martin Wilck <mwilck@suse.de>
+Date: Tue, 1 Oct 2019 12:02:04 +0200
+Subject: [PATCH] fixup "Dracut: only login to one target at a time"
+
+On SLE15-SP1 at least, iscsiadm doesn't support combining --op and --login":
+
+> # iscsiadm -m node -T iqn.2018-06.de.suse.zeus:01 --op=update --name=node.startup --value=onboot --login
+> iscsiadm: Invalid parameters. Login/logout and op passed in
+
+This breaks iSCSI login in initrd, and thus, iSCSI boot.
+
+Fix it by not coalescing everything into a single iscsiadm command.
+Fixes: a59b776bc215 ("Dracut: only login to one target at a time")
+References: bsc#1152650
+---
+ modules.d/95iscsi/iscsiroot.sh | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/modules.d/95iscsi/iscsiroot.sh b/modules.d/95iscsi/iscsiroot.sh
+index 4ab0b6a0..6a12a108 100755
+--- a/modules.d/95iscsi/iscsiroot.sh
++++ b/modules.d/95iscsi/iscsiroot.sh
+@@ -225,8 +225,8 @@ handle_netroot()
+
+ CMD="iscsiadm -m node -T $target \
+ ${iscsi_iface_name:+-I $iscsi_iface_name} \
+- -p $iscsi_target_ip${iscsi_target_port:+:$iscsi_target_port} \
+- --op=update \
++ -p $iscsi_target_ip${iscsi_target_port:+:$iscsi_target_port}"
++ __op="--op=update \
+ --name=node.startup --value=onboot \
+ ${iscsi_username:+ --name=node.session.auth.username --value=$iscsi_username} \
+ ${iscsi_password:+ --name=node.session.auth.password --value=$iscsi_password} \
+@@ -234,7 +234,7 @@ handle_netroot()
+ ${iscsi_in_password:+--name=node.session.auth.password_in --value=$iscsi_in_password} \
+ $EXTRA \
+ $NULL"
+- $CMD
++ $CMD $__op
+ if [ "$netif" != "timeout" ]; then
+ $CMD --login
+ fi
+
diff --git a/SOURCES/0217.patch b/SOURCES/0217.patch
new file mode 100644
index 0000000..f80cc76
--- /dev/null
+++ b/SOURCES/0217.patch
@@ -0,0 +1,37 @@
+From 934e69b64f4eff5df84d0d94a39aca1933bf3419 Mon Sep 17 00:00:00 2001
+From: Martin Wilck <mwilck@suse.de>
+Date: Fri, 27 Sep 2019 13:26:10 +0200
+Subject: [PATCH] 35network-legacy: only skip waiting for interfaces if netroot
+ is set
+
+Commmit 8a33e52e2f94 assumes that dracut's work is done if a root device
+is found. This holds usually for booting computers, but it may be wrong
+for other environments.
+
+Only short-cut the waiting if $netroot is also set.
+
+Fixes: 8a33e52e2f94 ("network: stop waiting for interfaces if root device is present")
+References: bsc#1152006
+
+Resolves: rhbz#2115199
+---
+ modules.d/35network-legacy/net-genrules.sh | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/modules.d/35network-legacy/net-genrules.sh b/modules.d/35network-legacy/net-genrules.sh
+index 0d4ef27b..d531bb56 100755
+--- a/modules.d/35network-legacy/net-genrules.sh
++++ b/modules.d/35network-legacy/net-genrules.sh
+@@ -96,7 +96,11 @@ command -v fix_bootif >/dev/null || . /lib/net-lib.sh
+
+ for iface in $IFACES; do
+ if [ "$bootdev" = "$iface" ] || [ "$NEEDNET" = "1" ]; then
+- echo "${DRACUT_SYSTEMD+systemctl is-active initrd-root-device.target || }[ -f /tmp/net.${iface}.did-setup ]" >$hookdir/initqueue/finished/wait-$iface.sh
++ if [ -n "$netroot" ] && [ -n "$DRACUT_SYSTEMD" ]; then
++ echo "systemctl is-active initrd-root-device.target || [ -f /tmp/net.${iface}.did-setup ]"
++ else
++ echo "[ -f /tmp/net.${iface}.did-setup ]"
++ fi >$hookdir/initqueue/finished/wait-$iface.sh
+ fi
+ done
+ # Default: We don't know the interface to use, handle all
diff --git a/SOURCES/0218.patch b/SOURCES/0218.patch
new file mode 100644
index 0000000..c108c35
--- /dev/null
+++ b/SOURCES/0218.patch
@@ -0,0 +1,27 @@
+From c14d276bc5dd17d881478bbce57d54e3c4ffb094 Mon Sep 17 00:00:00 2001
+From: Pavel Valena <pvalena@redhat.com>
+Date: Tue, 6 Dec 2022 20:35:52 +0100
+Subject: [PATCH] fix(80lvmthinpool-monitor): use systemsctl instead of
+ $SYSTEMCTL
+
+as the change is not backported to RHEL-8.
+
+rhel-only
+
+Resolves: #2141480
+---
+ modules.d/80lvmthinpool-monitor/module-setup.sh | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/modules.d/80lvmthinpool-monitor/module-setup.sh b/modules.d/80lvmthinpool-monitor/module-setup.sh
+index ca015bdc..550f3f16 100755
+--- a/modules.d/80lvmthinpool-monitor/module-setup.sh
++++ b/modules.d/80lvmthinpool-monitor/module-setup.sh
+@@ -20,5 +20,5 @@ install() {
+ inst_script "$moddir/start-thinpool-monitor.sh" "/bin/start-thinpool-monitor"
+
+ inst "$moddir/start-thinpool-monitor.service" "$systemdsystemunitdir/start-thinpool-monitor.service"
+- $SYSTEMCTL -q --root "$initdir" add-wants initrd.target start-thinpool-monitor.service
++ systemctl -q --root "$initdir" add-wants initrd.target start-thinpool-monitor.service
+ }
+
diff --git a/SOURCES/0219.patch b/SOURCES/0219.patch
new file mode 100644
index 0000000..5bfca81
--- /dev/null
+++ b/SOURCES/0219.patch
@@ -0,0 +1,101 @@
+From 3aca4acaea9569573d3d0e83c3c7998b56ea74c4 Mon Sep 17 00:00:00 2001
+From: Hari Bathini <hbathini@linux.ibm.com>
+Date: Tue, 12 Jul 2022 13:55:47 +0530
+Subject: [PATCH] fix(squash): build ld cache for squash loader
+
+Commit dc21638c3f0a fixes kdump kernel crash, due to non-conventional
+library path in powerpc, by copying /etc/ld.so.cache under initdir.
+While that works in general, it is vulnerable to failure because of
+missing links, when the CPU is reconfigured to run in compatibility
+mode of older CPU version. Avoid this by running ldconfig for squash
+loader to create the necessary links & ld cache for it. Doing this
+also saves a few kilobyes of space as the copied ld cache is bigger
+in size than the one needed for squash loader environment.
+
+Fixes: dc21638c3f0a ("fix(squash): keep ld cache under initdir")
+Cc: Pingfan Liu <piliu@redhat.com>
+Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
+
+(Cherry-picked from f5e8250a06b5a53f6fd8e47ec976db933c91b3cd)
+
+Resolves: #2055026
+---
+ dracut-init.sh | 14 ++++++++++++++
+ dracut.sh | 11 +----------
+ modules.d/99squash/module-setup.sh | 8 +++-----
+ 3 files changed, 18 insertions(+), 15 deletions(-)
+
+diff --git a/dracut-init.sh b/dracut-init.sh
+index 032c38c2..5df2e583 100644
+--- a/dracut-init.sh
++++ b/dracut-init.sh
+@@ -443,6 +443,20 @@ inst_rules_wildcard() {
+ [[ $_found ]] || dinfo "Skipping udev rule: $_rule"
+ }
+
++# make sure that library links are correct and up to date
++build_ld_cache() {
++ for f in "$dracutsysrootdir"/etc/ld.so.conf "$dracutsysrootdir"/etc/ld.so.conf.d/*; do
++ [[ -f $f ]] && inst_simple "${f#$dracutsysrootdir}"
++ done
++ if ! $DRACUT_LDCONFIG -r "$initdir" -f /etc/ld.so.conf; then
++ if [[ $EUID == 0 ]]; then
++ derror "ldconfig exited ungracefully"
++ else
++ derror "ldconfig might need uid=0 (root) for chroot()"
++ fi
++ fi
++}
++
+ prepare_udev_rules() {
+ [ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; })
+
+diff --git a/dracut.sh b/dracut.sh
+index 702b2f78..57f51e91 100755
+--- a/dracut.sh
++++ b/dracut.sh
+@@ -1601,16 +1601,7 @@ done
+
+ if [[ $kernel_only != yes ]]; then
+ # make sure that library links are correct and up to date
+- for f in /etc/ld.so.conf /etc/ld.so.conf.d/*; do
+- [[ -f $f ]] && inst_simple "$f"
+- done
+- if ! ldconfig -r "$initdir"; then
+- if [[ $EUID = 0 ]]; then
+- derror "ldconfig exited ungracefully"
+- else
+- derror "ldconfig might need uid=0 (root) for chroot()"
+- fi
+- fi
++ build_ld_cache
+ fi
+
+ if [[ $do_hardlink = yes ]] && command -v hardlink >/dev/null; then
+diff --git a/modules.d/99squash/module-setup.sh b/modules.d/99squash/module-setup.sh
+index e73d3184..8a0923fb 100644
+--- a/modules.d/99squash/module-setup.sh
++++ b/modules.d/99squash/module-setup.sh
+@@ -28,11 +28,6 @@ installpost() {
+ [[ "$squash_dir" == "$i"/* ]] || mv "$i" "$squash_dir"/
+ done
+
+- # initdir also needs ld.so.* to make ld.so work
+- inst /etc/ld.so.cache
+- inst /etc/ld.so.conf
+- inst_dir /etc/ld.so.conf.d
+-
+ # Create mount points for squash loader
+ mkdir -p "$initdir"/squash/
+ mkdir -p "$squash_dir"/squash/
+@@ -68,6 +63,9 @@ installpost() {
+ ln_r /usr/bin /bin
+ ln_r /usr/sbin /sbin
+ inst_simple "$moddir"/init-squash.sh /init
++
++ # make sure that library links are correct and up to date for squash loader
++ build_ld_cache
+ }
+
+ install() {
+
diff --git a/SOURCES/0220.patch b/SOURCES/0220.patch
new file mode 100644
index 0000000..10ca1dc
--- /dev/null
+++ b/SOURCES/0220.patch
@@ -0,0 +1,31 @@
+From 82a47345a8e7d54616481098b7b16de6e7fba83b Mon Sep 17 00:00:00 2001
+From: Beniamino Galvani <bgalvani@redhat.com>
+Date: Mon, 9 Aug 2021 09:01:32 +0200
+Subject: [PATCH] fix(network-manager): write DHCP filename option to dhcpopts
+ file
+
+Anaconda parses the 'filename' variable [1] set in /tmp/net.$netif.dhcpopts to
+determine the name of the kickstart file to use.
+
+[1] https://github.com/rhinstaller/anaconda/blob/anaconda-35.21-1/dracut/fetch-kickstart-net.sh#L31-L34
+
+(Cherry-picked from commit 1513505db452f9425ae1d25b9bb28c176d9c7ed9)
+
+Resolves: #1991449
+---
+ modules.d/35network-manager/nm-run.sh | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/modules.d/35network-manager/nm-run.sh b/modules.d/35network-manager/nm-run.sh
+index 61752384..94c19545 100755
+--- a/modules.d/35network-manager/nm-run.sh
++++ b/modules.d/35network-manager/nm-run.sh
+@@ -22,7 +22,7 @@ do
+ state=/run/NetworkManager/devices/$(cat $_i/ifindex)
+ grep -q connection-uuid= $state 2>/dev/null || continue
+ ifname=${_i##*/}
+- sed -n 's/root-path/new_root_path/p;s/next-server/new_next_server/p' <$state >/tmp/dhclient.$ifname.dhcpopts
++ sed -n 's/root-path/new_root_path/p;s/next-server/new_next_server/p;s/dhcp-bootfile/filename/p' <$state >/tmp/dhclient.$ifname.dhcpopts
+ source_hook initqueue/online $ifname
+ /sbin/netroot $ifname
+ done
diff --git a/SOURCES/0221.patch b/SOURCES/0221.patch
new file mode 100644
index 0000000..13c2971
--- /dev/null
+++ b/SOURCES/0221.patch
@@ -0,0 +1,26 @@
+From 7e401546ec38b3b5858136e93aeeffb93e496556 Mon Sep 17 00:00:00 2001
+From: Lukas Nykryn <lnykryn@redhat.com>
+Date: Tue, 10 Jan 2023 10:43:50 +0100
+Subject: [PATCH] fix(dracut-init): use ldconfig directly instead of
+ DRACUT_LDCONFIG
+
+RHEL-only
+Resolves: #2141480
+---
+ dracut-init.sh | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/dracut-init.sh b/dracut-init.sh
+index 5df2e583..b6708288 100644
+--- a/dracut-init.sh
++++ b/dracut-init.sh
+@@ -448,7 +448,7 @@ build_ld_cache() {
+ for f in "$dracutsysrootdir"/etc/ld.so.conf "$dracutsysrootdir"/etc/ld.so.conf.d/*; do
+ [[ -f $f ]] && inst_simple "${f#$dracutsysrootdir}"
+ done
+- if ! $DRACUT_LDCONFIG -r "$initdir" -f /etc/ld.so.conf; then
++ if ! ldconfig -r "$initdir" -f /etc/ld.so.conf; then
+ if [[ $EUID == 0 ]]; then
+ derror "ldconfig exited ungracefully"
+ else
+
diff --git a/SOURCES/0222.patch b/SOURCES/0222.patch
new file mode 100644
index 0000000..2876131
--- /dev/null
+++ b/SOURCES/0222.patch
@@ -0,0 +1,47 @@
+From a7eaedb1679d871c213753fad872d65b23070240 Mon Sep 17 00:00:00 2001
+From: Pavel Valena <pvalena@redhat.com>
+Date: Thu, 19 Jan 2023 16:04:19 +0100
+Subject: [PATCH] fix(dracut-init.sh): backport common paths
+
+While backporting, some paths might be expected to be defined.
+Backporting these paths as a preemptive measure (there's no test)
+to avoid possible regressions when they're undefined.
+
+(Cherry-picked from a01204202b3014c0c761c93bc7de8bf35e6dc5ef
+and 18d36fabf5ab20404e63ae56f166a5a53a874ba9)
+
+RHEL-only
+Resolves: #2141480
+---
+ dracut-init.sh | 4 ++++
+ dracut.sh | 2 ++
+ 2 files changed, 6 insertions(+)
+
+diff --git a/dracut-init.sh b/dracut-init.sh
+index b6708288..50f9cf98 100644
+--- a/dracut-init.sh
++++ b/dracut-init.sh
+@@ -79,6 +79,10 @@ export srcmods
+ export hookdirs
+ }
+
++DRACUT_LDD=${DRACUT_LDD:-ldd}
++DRACUT_TESTBIN=${DRACUT_TESTBIN:-/bin/sh}
++DRACUT_LDCONFIG=${DRACUT_LDCONFIG:-ldconfig}
++
+ . $dracutbasedir/dracut-functions.sh
+
+ # Detect lib paths
+diff --git a/dracut.sh b/dracut.sh
+index 57f51e91..f58559e8 100755
+--- a/dracut.sh
++++ b/dracut.sh
+@@ -730,6 +730,8 @@ done
+ export PATH="${NPATH#:}"
+ unset NPATH
+
++export SYSTEMCTL=${SYSTEMCTL:-systemctl}
++
+ # these options add to the stuff in the config file
+ (( ${#add_dracutmodules_l[@]} )) && add_dracutmodules+=" ${add_dracutmodules_l[@]} "
+ (( ${#force_add_dracutmodules_l[@]} )) && force_add_dracutmodules+=" ${force_add_dracutmodules_l[@]} "
diff --git a/SPECS/dracut.spec b/SPECS/dracut.spec
index 54b94f4..0cdb185 100644
--- a/SPECS/dracut.spec
+++ b/SPECS/dracut.spec
@@ -5,7 +5,7 @@
# strip the automatically generated dep here and instead co-own the
# directory.
%global __requires_exclude pkg-config
-%define dist_free_release 209.git20220815
+%define dist_free_release 223.git20230119
Name: dracut
Version: 049
@@ -236,6 +236,20 @@ Patch205: 0205.patch
Patch206: 0206.patch
Patch207: 0207.patch
Patch208: 0208.patch
+Patch209: 0209.patch
+Patch210: 0210.patch
+Patch211: 0211.patch
+Patch212: 0212.patch
+Patch213: 0213.patch
+Patch214: 0214.patch
+Patch215: 0215.patch
+Patch216: 0216.patch
+Patch217: 0217.patch
+Patch218: 0218.patch
+Patch219: 0219.patch
+Patch220: 0220.patch
+Patch221: 0221.patch
+Patch222: 0222.patch
Source1: https://www.gnu.org/licenses/lgpl-2.1.txt
@@ -690,6 +704,26 @@ echo '# Since rhel-8.3 dracut moved to use NetworkManager
add_dracutmodules+=" network-legacy "' > /etc/dracut.conf.d/50-network-legacy.conf
%changelog
+* Thu Jan 19 2023 Pavel Valena <pvalena@redhat.com> - 049-223.git20230119
+- fix(dracut-init): use ldconfig directly instead of
+- fix(dracut-init.sh): backport common paths
+
+* Wed Dec 14 2022 Pavel Valena <pvalena@redhat.com> - 049-221.git20221214
+- fix(80lvmthinpool-monitor): use systemsctl instead of
+- fix(squash): build ld cache for squash loader
+- fix(network-manager): write DHCP filename option to dhcpopts
+
+* Thu Oct 20 2022 Pavel Valena <pvalena@redhat.com> - 049-218.git20221019
+- Dracut: only login to one target at a time
+- iscsi: don't continue waiting if the root device is present
+- network: stop waiting for interfaces if root device is
+- iscsiroot: parse_iscsi_root overwrites command line args
+- iscsiroot: there's never more than one target per call
+- iscsiroot: try targets only once
+- iscsiroot: remove bashisms
+- fixup "Dracut: only login to one target at a time"
+- 35network-legacy: only skip waiting for interfaces if netroot
+
* Mon Aug 15 2022 Pavel Valena <pvalena@redhat.com> - 049-209.git20220815
- fix(95iscsi): Fix network setup
- fix(dracut-systemd): correct service dependencies