# -*- cfg-sha: 4d1578565c23e449d8e5c1c18e88181f05769b5132b7f22dcbed6bce900e9d0c

# BSD LICENSE

# Copyright (C) IBM Corporation 2014.

# Redistribution and use in source and binary forms, with or without

# modification, are permitted provided that the following conditions

# are met:

# * Redistributions of source code must retain the above copyright

# notice, this list of conditions and the following disclaimer.

# * Redistributions in binary form must reproduce the above copyright

# notice, this list of conditions and the following disclaimer in

# the documentation and/or other materials provided with the

# distribution.

# * Neither the name of IBM Corporation nor the names of its

# contributors may be used to endorse or promote products derived

# from this software without specific prior written permission.

# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT

# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# BSD LICENSE

# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.

# All rights reserved.

# Redistribution and use in source and binary forms, with or without

# modification, are permitted provided that the following conditions

# are met:

# * Redistributions of source code must retain the above copyright

# notice, this list of conditions and the following disclaimer.

# * Redistributions in binary form must reproduce the above copyright

# notice, this list of conditions and the following disclaimer in

# the documentation and/or other materials provided with the

# distribution.

# * Neither the name of Intel Corporation nor the names of its

# contributors may be used to endorse or promote products derived

# from this software without specific prior written permission.

# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT

# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# BSD LICENSE

# Copyright(c) 2010-2017 Intel Corporation. All rights reserved.

# All rights reserved.

# Redistribution and use in source and binary forms, with or without

# modification, are permitted provided that the following conditions

# are met:

# * Redistributions of source code must retain the above copyright

# notice, this list of conditions and the following disclaimer.

# * Redistributions in binary form must reproduce the above copyright

# notice, this list of conditions and the following disclaimer in

# the documentation and/or other materials provided with the

# distribution.

# * Neither the name of Intel Corporation nor the names of its

# contributors may be used to endorse or promote products derived

# from this software without specific prior written permission.

# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT

# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# RTE_EXEC_ENV values are the directories in mk/exec-env/

CONFIG_RTE_EXEC_ENV="linuxapp"

# RTE_ARCH values are architecture we compile for. directories in mk/arch/

CONFIG_RTE_ARCH="ppc_64"

# machine can define specific variables or action for a specific board

# RTE_MACHINE values are architecture we compile for. directories in mk/machine/

CONFIG_RTE_MACHINE="power8"

# The compiler we use.

# RTE_TOOLCHAIN values are architecture we compile for. directories in mk/toolchain/

CONFIG_RTE_TOOLCHAIN="gcc"

# Use intrinsics or assembly code for key routines

CONFIG_RTE_FORCE_INTRINSICS=n

# Machine forces strict alignment constraints.

CONFIG_RTE_ARCH_STRICT_ALIGN=n

# Compile to share library

CONFIG_RTE_BUILD_SHARED_LIB=y

# Use newest code breaking previous ABI

CONFIG_RTE_NEXT_ABI=n

# Major ABI to overwrite library specific LIBABIVER

CONFIG_RTE_MAJOR_ABI=

# Machine's cache line size

CONFIG_RTE_CACHE_LINE_SIZE=128

# Compile Environment Abstraction Layer

CONFIG_RTE_LIBRTE_EAL=y

CONFIG_RTE_MAX_LCORE=256

CONFIG_RTE_MAX_NUMA_NODES=32

CONFIG_RTE_MAX_MEMSEG=256

CONFIG_RTE_MAX_MEMZONE=2560

CONFIG_RTE_MAX_TAILQ=32

CONFIG_RTE_ENABLE_ASSERT=n

CONFIG_RTE_LOG_LEVEL=RTE_LOG_INFO

CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO

CONFIG_RTE_LOG_HISTORY=256

CONFIG_RTE_BACKTRACE=y

CONFIG_RTE_LIBEAL_USE_HPET=n

CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n

CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n

CONFIG_RTE_EAL_IGB_UIO=n

CONFIG_RTE_EAL_VFIO=y

CONFIG_RTE_MALLOC_DEBUG=n

CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=y

# Recognize/ignore architecture we compile for. AVX/AVX512 CPU flags for performance/power testing.

# AVX512 is marked as experimental for now, will enable it after enough

# field test and possible optimization.

CONFIG_RTE_ENABLE_AVX=y

CONFIG_RTE_ENABLE_AVX512=n

# Default driver path (or "" to disable)

CONFIG_RTE_EAL_PMD_PATH="/usr/lib64/dpdk-pmds"

# Compile Environment Abstraction Layer to support Vmware TSC map

CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n

# Compile architecture we compile for. PCI library

CONFIG_RTE_LIBRTE_PCI=y

# Compile architecture we compile for. argument parser library

CONFIG_RTE_LIBRTE_KVARGS=y

# Compile generic ethernet library

CONFIG_RTE_LIBRTE_ETHER=y

CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n

CONFIG_RTE_MAX_ETHPORTS=32

CONFIG_RTE_MAX_QUEUES_PER_PORT=1024

CONFIG_RTE_LIBRTE_IEEE1588=n

CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16

CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y

CONFIG_RTE_ETHDEV_PROFILE_ITT_WASTED_RX_ITERATIONS=n

# Turn off Tx preparation stage

# Warning: rte_eth_tx_prepare() can be safely disabled only if using a

# driver which do not implement any Tx preparation.

CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n

# Compile PCI bus driver

CONFIG_RTE_LIBRTE_PCI_BUS=y

# Compile architecture we compile for. vdev bus

CONFIG_RTE_LIBRTE_VDEV_BUS=y

# Compile burst-oriented Amazon ENA PMD driver

CONFIG_RTE_LIBRTE_ENA_PMD=n

CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n

CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n

CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n

CONFIG_RTE_LIBRTE_ENA_DEBUG_DRIVER=n

CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n

# Compile burst-oriented IGB & EM PMD drivers

CONFIG_RTE_LIBRTE_EM_PMD=n

CONFIG_RTE_LIBRTE_IGB_PMD=n

CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n

CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n

CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n

CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n

CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n

CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n

# Compile burst-oriented IXGBE PMD driver

CONFIG_RTE_LIBRTE_IXGBE_PMD=n

CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n

CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n

CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n

CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n

CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n

CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n

CONFIG_RTE_IXGBE_INC_VECTOR=y

CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n

# Compile burst-oriented I40E PMD driver

CONFIG_RTE_LIBRTE_I40E_PMD=y

CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n

CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n

CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n

CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y

CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y

CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n

CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64

CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4

CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4

# interval up to 8160 us, aligned to 2 (or default value)

CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1

# Compile burst-oriented FM10K PMD

CONFIG_RTE_LIBRTE_FM10K_PMD=n

CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n

CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n

CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n

CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n

CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n

CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y

CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y

# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD

CONFIG_RTE_LIBRTE_MLX4_PMD=n

CONFIG_RTE_LIBRTE_MLX4_DEBUG=n

CONFIG_RTE_LIBRTE_MLX4_DEBUG_BROKEN_VERBS=n

CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8

# Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD

CONFIG_RTE_LIBRTE_MLX5_PMD=n

CONFIG_RTE_LIBRTE_MLX5_DEBUG=n

CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8

# Compile burst-oriented Broadcom PMD driver

CONFIG_RTE_LIBRTE_BNX2X_PMD=n

CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n

CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n

CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n

CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n

CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n

CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n

# Compile burst-oriented Chelsio Terminator (CXGBE) PMD

CONFIG_RTE_LIBRTE_CXGBE_PMD=n

CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n

CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n

CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n

CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n

CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n

CONFIG_RTE_LIBRTE_CXGBE_TPUT=y

# Compile burst-oriented Cisco ENIC PMD driver

CONFIG_RTE_LIBRTE_ENIC_PMD=n

CONFIG_RTE_LIBRTE_ENIC_DEBUG=n

CONFIG_RTE_LIBRTE_ENIC_DEBUG_FLOW=n

# Compile burst-oriented Netronome NFP PMD driver

CONFIG_RTE_LIBRTE_NFP_PMD=n

CONFIG_RTE_LIBRTE_NFP_DEBUG=n

# Compile Marvell PMD driver

CONFIG_RTE_LIBRTE_MRVL_PMD=n

# Compile burst-oriented Broadcom BNXT PMD driver

CONFIG_RTE_LIBRTE_BNXT_PMD=n

# Compile burst-oriented Solarflare libefx-based PMD

CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n

CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n

# Compile SOFTNIC PMD

CONFIG_RTE_LIBRTE_PMD_SOFTNIC=y

# Compile software PMD backed by SZEDATA2 device

CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n

# Defines firmware type address space.

# See documentation for supported values.

# Other values raise compile time error.

CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0

# Compile burst-oriented Cavium Thunderx NICVF PMD driver

CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=n

CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_INIT=n

CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n

CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n

CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_DRIVER=n

CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_MBOX=n

# Compile burst-oriented Cavium LiquidIO PMD driver

CONFIG_RTE_LIBRTE_LIO_PMD=n

CONFIG_RTE_LIBRTE_LIO_DEBUG_DRIVER=n

CONFIG_RTE_LIBRTE_LIO_DEBUG_INIT=n

CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n

CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n

CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n

CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n

# NXP DPAA Bus

CONFIG_RTE_LIBRTE_DPAA_BUS=n

CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n

CONFIG_RTE_LIBRTE_DPAA_PMD=n

# Compile burst-oriented Cavium OCTEONTX network PMD driver

CONFIG_RTE_LIBRTE_OCTEONTX_PMD=n

CONFIG_RTE_LIBRTE_OCTEONTX_DEBUG_INIT=n

CONFIG_RTE_LIBRTE_OCTEONTX_DEBUG_RX=n

CONFIG_RTE_LIBRTE_OCTEONTX_DEBUG_TX=n

CONFIG_RTE_LIBRTE_OCTEONTX_DEBUG_DRIVER=n

CONFIG_RTE_LIBRTE_OCTEONTX_DEBUG_MBOX=n

# Compile NXP DPAA2 FSL-MC Bus

CONFIG_RTE_LIBRTE_FSLMC_BUS=n

# Compile Support Libraries for NXP DPAA2

CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n

CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y

# Compile burst-oriented NXP DPAA2 PMD driver

CONFIG_RTE_LIBRTE_DPAA2_PMD=n

CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n

CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n

CONFIG_RTE_LIBRTE_DPAA2_DEBUG_RX=n

CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX=n

CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n

# Compile burst-oriented VIRTIO PMD driver

CONFIG_RTE_LIBRTE_VIRTIO_PMD=y

CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n

CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n

CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n

CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n

CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n

# Compile virtio device emulation inside virtio PMD driver

CONFIG_RTE_VIRTIO_USER=y

# Compile burst-oriented VMXNET3 PMD driver

CONFIG_RTE_LIBRTE_VMXNET3_PMD=n

CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n

CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n

CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n

CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n

CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n

# Compile example software rings based PMD

CONFIG_RTE_LIBRTE_PMD_RING=y

CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16

CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16

# Compile software PMD backed by PCAP files

CONFIG_RTE_LIBRTE_PMD_PCAP=n

# Compile link bonding PMD library

CONFIG_RTE_LIBRTE_PMD_BOND=n

CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n

CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n

# QLogic 10G/25G/40G/50G/100G PMD

CONFIG_RTE_LIBRTE_QEDE_PMD=n

CONFIG_RTE_LIBRTE_QEDE_DEBUG_INIT=n

CONFIG_RTE_LIBRTE_QEDE_DEBUG_INFO=n

CONFIG_RTE_LIBRTE_QEDE_DEBUG_DRIVER=n

CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n

CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n

CONFIG_RTE_LIBRTE_QEDE_VF_TX_SWITCH=y

#Provides abs path/name of architecture we compile for. firmware file.

#Empty string denotes driver will use default firmware

CONFIG_RTE_LIBRTE_QEDE_FW=""

# Compile software PMD backed by AF_PACKET sockets (Linux only)

CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n

# Compile ARK PMD

CONFIG_RTE_LIBRTE_ARK_PMD=n

CONFIG_RTE_LIBRTE_ARK_PAD_TX=y

CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n

CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n

CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n

CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n

# Compile WRS accelerated virtual port (AVP) guest PMD driver

CONFIG_RTE_LIBRTE_AVP_PMD=n

CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n

CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n

CONFIG_RTE_LIBRTE_AVP_DEBUG_DRIVER=y

CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n

# Compile architecture we compile for. TAP PMD

# It is enabled by default for Linux only.

CONFIG_RTE_LIBRTE_PMD_TAP=n

# Compile null PMD

CONFIG_RTE_LIBRTE_PMD_NULL=n

# Compile fail-safe PMD

CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y

# Do prefetch of packet data within PMD driver receive function

CONFIG_RTE_PMD_PACKET_PREFETCH=y

# Compile generic crypto device library

CONFIG_RTE_LIBRTE_CRYPTODEV=y

CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n

CONFIG_RTE_CRYPTO_MAX_DEVS=64

CONFIG_RTE_CRYPTODEV_NAME_LEN=64

# Compile PMD for ARMv8 Crypto device

CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n

CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n

# Compile NXP DPAA2 crypto sec driver for CAAM HW

CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n

CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n

CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n

CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n

# NXP DPAA caam - crypto driver

CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n

CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_INIT=n

CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_DRIVER=n

CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_RX=n

# Compile PMD for QuickAssist based devices

CONFIG_RTE_LIBRTE_PMD_QAT=n

CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n

CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n

CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n

CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n

# Number of sessions to create in architecture we compile for. session memory pool

# on a single QuickAssist device.

CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048

# Compile PMD for AESNI backed device

CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n

CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n

# Compile PMD for Software backed device

CONFIG_RTE_LIBRTE_PMD_OPENSSL=n

CONFIG_RTE_LIBRTE_PMD_OPENSSL_DEBUG=n

# Compile PMD for AESNI GCM device

CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n

CONFIG_RTE_LIBRTE_PMD_AESNI_GCM_DEBUG=n

# Compile PMD for SNOW 3G device

CONFIG_RTE_LIBRTE_PMD_SNOW3G=n

CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n

# Compile PMD for KASUMI device

CONFIG_RTE_LIBRTE_PMD_KASUMI=n

CONFIG_RTE_LIBRTE_PMD_KASUMI_DEBUG=n

# Compile PMD for ZUC device

CONFIG_RTE_LIBRTE_PMD_ZUC=n

CONFIG_RTE_LIBRTE_PMD_ZUC_DEBUG=n

# Compile PMD for Crypto Scheduler device

CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=n

CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER_DEBUG=n

# Compile PMD for NULL Crypto device

CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n

# Compile PMD for Marvell Crypto device

CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO=n

CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO_DEBUG=n

# Compile generic security library

CONFIG_RTE_LIBRTE_SECURITY=y

# Compile generic event device library

CONFIG_RTE_LIBRTE_EVENTDEV=y

CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n

CONFIG_RTE_EVENT_MAX_DEVS=16

CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64

# Compile PMD for skeleton event device

CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=n

CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n

# Compile PMD for software event device

CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=n

CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV_DEBUG=n

# Compile PMD for octeontx sso event device

CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=n

CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF_DEBUG=n

# Compile librte_ring

CONFIG_RTE_LIBRTE_RING=y

# Compile librte_mempool

CONFIG_RTE_LIBRTE_MEMPOOL=y

CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512

CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n

# Compile Mempool drivers

CONFIG_RTE_DRIVER_MEMPOOL_RING=y

CONFIG_RTE_DRIVER_MEMPOOL_STACK=y

# Compile PMD for octeontx fpa mempool device

CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y

CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL_DEBUG=n

# Compile librte_mbuf

CONFIG_RTE_LIBRTE_MBUF=y

CONFIG_RTE_LIBRTE_MBUF_DEBUG=n

CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"

CONFIG_RTE_MBUF_REFCNT_ATOMIC=y

CONFIG_RTE_PKTMBUF_HEADROOM=128

# Compile librte_timer

CONFIG_RTE_LIBRTE_TIMER=y

CONFIG_RTE_LIBRTE_TIMER_DEBUG=n

# Compile librte_cfgfile

CONFIG_RTE_LIBRTE_CFGFILE=y

# Compile librte_cmdline

CONFIG_RTE_LIBRTE_CMDLINE=y

CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n

# Compile librte_hash

CONFIG_RTE_LIBRTE_HASH=y

CONFIG_RTE_LIBRTE_HASH_DEBUG=n

# Compile librte_efd

CONFIG_RTE_LIBRTE_EFD=y

# Compile librte_member

CONFIG_RTE_LIBRTE_MEMBER=y

# Compile librte_jobstats

CONFIG_RTE_LIBRTE_JOBSTATS=y

# Compile architecture we compile for. device metrics library

CONFIG_RTE_LIBRTE_METRICS=y

# Compile architecture we compile for. bitrate statistics library

CONFIG_RTE_LIBRTE_BITRATE=y

# Compile architecture we compile for. latency statistics library

CONFIG_RTE_LIBRTE_LATENCY_STATS=y

# Compile librte_lpm

CONFIG_RTE_LIBRTE_LPM=y

CONFIG_RTE_LIBRTE_LPM_DEBUG=n

# Compile librte_acl

CONFIG_RTE_LIBRTE_ACL=y

CONFIG_RTE_LIBRTE_ACL_DEBUG=n

# Compile librte_power

CONFIG_RTE_LIBRTE_POWER=y

CONFIG_RTE_LIBRTE_POWER_DEBUG=n

CONFIG_RTE_MAX_LCORE_FREQS=64

# Compile librte_net

CONFIG_RTE_LIBRTE_NET=y

# Compile librte_ip_frag

CONFIG_RTE_LIBRTE_IP_FRAG=y

CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n

CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4

CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n

# Compile GRO library

CONFIG_RTE_LIBRTE_GRO=y

# Compile GSO library

CONFIG_RTE_LIBRTE_GSO=y

# Compile librte_meter

CONFIG_RTE_LIBRTE_METER=y

# Compile librte_classify

CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y

# Compile librte_sched

CONFIG_RTE_LIBRTE_SCHED=y

CONFIG_RTE_SCHED_DEBUG=n

CONFIG_RTE_SCHED_RED=n

CONFIG_RTE_SCHED_COLLECT_STATS=n

CONFIG_RTE_SCHED_SUBPORT_TC_OV=n

CONFIG_RTE_SCHED_PORT_N_GRINDERS=8

CONFIG_RTE_SCHED_VECTOR=n

# Compile architecture we compile for. distributor library

CONFIG_RTE_LIBRTE_DISTRIBUTOR=y

# Compile architecture we compile for. reorder library

CONFIG_RTE_LIBRTE_REORDER=y

# Compile librte_port

CONFIG_RTE_LIBRTE_PORT=y

CONFIG_RTE_PORT_STATS_COLLECT=n

CONFIG_RTE_PORT_PCAP=n

# Compile librte_table

CONFIG_RTE_LIBRTE_TABLE=y

CONFIG_RTE_TABLE_STATS_COLLECT=n

# Compile librte_pipeline

CONFIG_RTE_LIBRTE_PIPELINE=y

CONFIG_RTE_PIPELINE_STATS_COLLECT=n

# Compile librte_kni

CONFIG_RTE_LIBRTE_KNI=n

CONFIG_RTE_LIBRTE_PMD_KNI=n

CONFIG_RTE_KNI_KMOD=n

CONFIG_RTE_KNI_KMOD_ETHTOOL=n

CONFIG_RTE_KNI_PREEMPT_DEFAULT=y

# Compile architecture we compile for. pdump library

CONFIG_RTE_LIBRTE_PDUMP=y

# Compile vhost user library

CONFIG_RTE_LIBRTE_VHOST=y

CONFIG_RTE_LIBRTE_VHOST_NUMA=y

CONFIG_RTE_LIBRTE_VHOST_DEBUG=n

# Compile vhost PMD

# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.

CONFIG_RTE_LIBRTE_PMD_VHOST=y

# Compile architecture we compile for. test application

CONFIG_RTE_APP_TEST=y

CONFIG_RTE_APP_TEST_RESOURCE_TAR=n

# Compile architecture we compile for. PMD test application

CONFIG_RTE_TEST_PMD=y

CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n

CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n

# Compile architecture we compile for. crypto performance application

CONFIG_RTE_APP_CRYPTO_PERF=y

# Compile architecture we compile for. eventdev application

CONFIG_RTE_APP_EVENTDEV=y

CONFIG_RTE_EXEC_ENV_LINUXAPP=y

CONFIG_RTE_ARCH_PPC_64=y

CONFIG_RTE_ARCH_64=y

CONFIG_RTE_TOOLCHAIN_GCC=y

# Note: Power doesn't have this support

# Note: Initially, all of architecture we compile for. PMD drivers compilation are turned off on Power

# Will turn on them only after architecture we compile for. successful testing on Power

CONFIG_RTE_LIBRTE_PMD_XENVIRT=n