# -*- cfg-sha: ac783e64ca20c977a7c1c42e72e6dce151b31aa9aecfbfa121b45e49e938f418

# BSD LICENSE

# Copyright (C) IBM Corporation 2014.

# Redistribution and use in source and binary forms, with or without

# modification, are permitted provided that the following conditions

# are met:

# * Redistributions of source code must retain the above copyright

# notice, this list of conditions and the following disclaimer.

# * Redistributions in binary form must reproduce the above copyright

# notice, this list of conditions and the following disclaimer in

# the documentation and/or other materials provided with the

# distribution.

# * Neither the name of IBM Corporation nor the names of its

# contributors may be used to endorse or promote products derived

# from this software without specific prior written permission.

# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT

# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# SPDX-License-Identifier: BSD-3-Clause

# Copyright(c) 2010-2016 Intel Corporation

# SPDX-License-Identifier: BSD-3-Clause

# Copyright(c) 2010-2017 Intel Corporation

# RTE_EXEC_ENV values are the directories in mk/exec-env/

CONFIG_RTE_EXEC_ENV="linuxapp"

# RTE_ARCH values are architecture we compile for. directories in mk/arch/

CONFIG_RTE_ARCH="ppc_64"

# machine can define specific variables or action for a specific board

# RTE_MACHINE values are architecture we compile for. directories in mk/machine/

CONFIG_RTE_MACHINE="power8"

# The compiler we use.

# RTE_TOOLCHAIN values are architecture we compile for. directories in mk/toolchain/

CONFIG_RTE_TOOLCHAIN="gcc"

# Use intrinsics or assembly code for key routines

CONFIG_RTE_FORCE_INTRINSICS=n

# Machine forces strict alignment constraints.

CONFIG_RTE_ARCH_STRICT_ALIGN=n

# Compile to share library

CONFIG_RTE_BUILD_SHARED_LIB=y

# Use newest code breaking previous ABI

CONFIG_RTE_NEXT_ABI=n

# Major ABI to overwrite library specific LIBABIVER

CONFIG_RTE_MAJOR_ABI=

# Machine's cache line size

CONFIG_RTE_CACHE_LINE_SIZE=128

# Memory model

CONFIG_RTE_USE_C11_MEM_MODEL=n

# Compile Environment Abstraction Layer

CONFIG_RTE_LIBRTE_EAL=y

CONFIG_RTE_MAX_LCORE=256

CONFIG_RTE_MAX_NUMA_NODES=32

CONFIG_RTE_MAX_HEAPS=32

CONFIG_RTE_MAX_MEMSEG_LISTS=64

# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages

# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller

CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192

CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768

# a "type" is a combination of page size and NUMA node. total number of memseg

# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split

# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or

# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of

# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller

CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768

CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072

# global maximum usable amount of VA, in megabytes

CONFIG_RTE_MAX_MEM_MB=524288

CONFIG_RTE_MAX_MEMZONE=2560

CONFIG_RTE_MAX_TAILQ=32

CONFIG_RTE_ENABLE_ASSERT=n

CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO

CONFIG_RTE_LOG_HISTORY=256

CONFIG_RTE_BACKTRACE=y

CONFIG_RTE_LIBEAL_USE_HPET=n

CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n

CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n

CONFIG_RTE_EAL_IGB_UIO=n

CONFIG_RTE_EAL_VFIO=y

CONFIG_RTE_MAX_VFIO_GROUPS=64

CONFIG_RTE_MAX_VFIO_CONTAINERS=64

CONFIG_RTE_MALLOC_DEBUG=n

CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=y

CONFIG_RTE_USE_LIBBSD=n

# Recognize/ignore architecture we compile for. AVX/AVX512 CPU flags for performance/power testing.

# AVX512 is marked as experimental for now, will enable it after enough

# field test and possible optimization.

CONFIG_RTE_ENABLE_AVX=y

CONFIG_RTE_ENABLE_AVX512=n

# Default driver path (or "" to disable)

CONFIG_RTE_EAL_PMD_PATH="/usr/lib64/dpdk-pmds"

# Compile Environment Abstraction Layer to support Vmware TSC map

CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n

# Compile architecture we compile for. PCI library

CONFIG_RTE_LIBRTE_PCI=y

# Compile architecture we compile for. argument parser library

CONFIG_RTE_LIBRTE_KVARGS=y

# Compile generic ethernet library

CONFIG_RTE_LIBRTE_ETHER=y

CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n

CONFIG_RTE_MAX_ETHPORTS=32

CONFIG_RTE_MAX_QUEUES_PER_PORT=1024

CONFIG_RTE_LIBRTE_IEEE1588=n

CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16

CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y

CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n

# Turn off Tx preparation stage

# Warning: rte_eth_tx_prepare() can be safely disabled only if using a

# driver which do not implement any Tx preparation.

CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n

# Common libraries, before Bus/PMDs

CONFIG_RTE_LIBRTE_COMMON_DPAAX=n

# Compile architecture we compile for. Intel FPGA bus

CONFIG_RTE_LIBRTE_IFPGA_BUS=n

# Compile PCI bus driver

CONFIG_RTE_LIBRTE_PCI_BUS=y

# Compile architecture we compile for. vdev bus

CONFIG_RTE_LIBRTE_VDEV_BUS=y

# Compile ARK PMD

CONFIG_RTE_LIBRTE_ARK_PMD=n

CONFIG_RTE_LIBRTE_ARK_PAD_TX=y

CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n

CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n

CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n

CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n

# Compile Aquantia Atlantic PMD driver

CONFIG_RTE_LIBRTE_ATLANTIC_PMD=n

# Compile AMD PMD

CONFIG_RTE_LIBRTE_AXGBE_PMD=n

CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n

# Compile burst-oriented Broadcom PMD driver

CONFIG_RTE_LIBRTE_BNX2X_PMD=n

CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n

CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n

CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n

CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n

# Compile burst-oriented Broadcom BNXT PMD driver

CONFIG_RTE_LIBRTE_BNXT_PMD=n

# Compile burst-oriented Chelsio Terminator (CXGBE) PMD

CONFIG_RTE_LIBRTE_CXGBE_PMD=n

CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n

CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n

CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n

CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n

CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n

CONFIG_RTE_LIBRTE_CXGBE_TPUT=y

# NXP DPAA Bus

CONFIG_RTE_LIBRTE_DPAA_BUS=n

CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n

CONFIG_RTE_LIBRTE_DPAA_PMD=n

CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n

# Compile NXP DPAA2 FSL-MC Bus

CONFIG_RTE_LIBRTE_FSLMC_BUS=n

# Compile Support Libraries for NXP DPAA2

CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n

CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y

# Compile burst-oriented NXP DPAA2 PMD driver

CONFIG_RTE_LIBRTE_DPAA2_PMD=n

CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n

# Compile NXP ENETC PMD Driver

CONFIG_RTE_LIBRTE_ENETC_PMD=n

# Compile burst-oriented Amazon ENA PMD driver

CONFIG_RTE_LIBRTE_ENA_PMD=n

CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n

CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n

CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n

CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n

# Compile burst-oriented Cisco ENIC PMD driver

CONFIG_RTE_LIBRTE_ENIC_PMD=n

# Compile burst-oriented IGB & EM PMD drivers

CONFIG_RTE_LIBRTE_EM_PMD=n

CONFIG_RTE_LIBRTE_IGB_PMD=n

CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n

CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n

CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n

CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n

# Compile burst-oriented IXGBE PMD driver

CONFIG_RTE_LIBRTE_IXGBE_PMD=n

CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n

CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n

CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n

CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n

CONFIG_RTE_IXGBE_INC_VECTOR=y

CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n

# Compile burst-oriented I40E PMD driver

CONFIG_RTE_LIBRTE_I40E_PMD=y

CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n

CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n

CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n

CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y

CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y

CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n

CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64

CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4

# Compile burst-oriented FM10K PMD

CONFIG_RTE_LIBRTE_FM10K_PMD=n

CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n

CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n

CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n

CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y

CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y

# Compile burst-oriented AVF PMD driver

CONFIG_RTE_LIBRTE_AVF_PMD=n

CONFIG_RTE_LIBRTE_AVF_INC_VECTOR=y

CONFIG_RTE_LIBRTE_AVF_DEBUG_TX=n

CONFIG_RTE_LIBRTE_AVF_DEBUG_TX_FREE=n

CONFIG_RTE_LIBRTE_AVF_DEBUG_RX=n

CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n

# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD

CONFIG_RTE_LIBRTE_MLX4_PMD=n

CONFIG_RTE_LIBRTE_MLX4_DEBUG=n

CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n

# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield

# (MLX5) PMD

CONFIG_RTE_LIBRTE_MLX5_PMD=n

CONFIG_RTE_LIBRTE_MLX5_DEBUG=n

CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS=n

# Compile burst-oriented Netronome NFP PMD driver

CONFIG_RTE_LIBRTE_NFP_PMD=n

CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n

CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n

# QLogic 10G/25G/40G/50G/100G PMD

CONFIG_RTE_LIBRTE_QEDE_PMD=n

CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n

CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n

#Provides abs path/name of architecture we compile for. firmware file.

#Empty string denotes driver will use default firmware

CONFIG_RTE_LIBRTE_QEDE_FW=""

# Compile burst-oriented Solarflare libefx-based PMD

CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n

CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n

# Compile software PMD backed by SZEDATA2 device

CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n

# Compile burst-oriented Cavium Thunderx NICVF PMD driver

CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=n

CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n

CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n

# Compile burst-oriented Cavium LiquidIO PMD driver

CONFIG_RTE_LIBRTE_LIO_PMD=n

CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n

CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n

CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n

CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n

# Compile burst-oriented Cavium OCTEONTX network PMD driver

CONFIG_RTE_LIBRTE_OCTEONTX_PMD=n

# Compile WRS accelerated virtual port (AVP) guest PMD driver

CONFIG_RTE_LIBRTE_AVP_PMD=n

CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n

CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n

CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n

# Compile burst-oriented VIRTIO PMD driver

CONFIG_RTE_LIBRTE_VIRTIO_PMD=y

CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n

CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n

CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n

# Compile virtio device emulation inside virtio PMD driver

CONFIG_RTE_VIRTIO_USER=n

# Compile burst-oriented VMXNET3 PMD driver

CONFIG_RTE_LIBRTE_VMXNET3_PMD=n

CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n

CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n

CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n

# Compile software PMD backed by AF_PACKET sockets (Linux only)

CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n

# Compile link bonding PMD library

CONFIG_RTE_LIBRTE_PMD_BOND=n

CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n

CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n

# Compile fail-safe PMD

CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y

# Compile Marvell PMD driver

CONFIG_RTE_LIBRTE_MVPP2_PMD=n

# Compile Marvell MVNETA PMD driver

CONFIG_RTE_LIBRTE_MVNETA_PMD=n

# Compile support for VMBus library

CONFIG_RTE_LIBRTE_VMBUS=n

# Compile native PMD for Hyper-V/Azure

CONFIG_RTE_LIBRTE_NETVSC_PMD=n

CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n

CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n

CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n

# Compile virtual device driver for NetVSC on Hyper-V/Azure

CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n

# Compile null PMD

CONFIG_RTE_LIBRTE_PMD_NULL=n

# Compile software PMD backed by PCAP files

CONFIG_RTE_LIBRTE_PMD_PCAP=n

# Compile example software rings based PMD

CONFIG_RTE_LIBRTE_PMD_RING=y

CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16

CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16

# Compile SOFTNIC PMD

CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n

# Compile architecture we compile for. TAP PMD

# It is enabled by default for Linux only.

CONFIG_RTE_LIBRTE_PMD_TAP=y

# Do prefetch of packet data within PMD driver receive function

CONFIG_RTE_PMD_PACKET_PREFETCH=y

# Compile generic wireless base band device library

# EXPERIMENTAL: API may change without prior notice

CONFIG_RTE_LIBRTE_BBDEV=n

CONFIG_RTE_BBDEV_MAX_DEVS=128

CONFIG_RTE_BBDEV_OFFLOAD_COST=n

# Compile PMD for NULL bbdev device

CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y

# Compile PMD for turbo software bbdev device

CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=n

# Compile generic crypto device library

CONFIG_RTE_LIBRTE_CRYPTODEV=n

CONFIG_RTE_CRYPTO_MAX_DEVS=64

# Compile PMD for ARMv8 Crypto device

CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n

CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n

# Compile NXP CAAM JR crypto Driver

CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n

CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n

# Compile NXP DPAA2 crypto sec driver for CAAM HW

CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n

# NXP DPAA caam - crypto driver

CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n

CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4

# Compile PMD for Cavium OCTEON TX crypto device

CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y

# Compile PMD for QuickAssist based devices - see docs for details

CONFIG_RTE_LIBRTE_PMD_QAT=n

CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n

# Max. number of QuickAssist devices, which can be detected and attached

CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48

CONFIG_RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS=16

CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536

# Compile PMD for virtio crypto devices

CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=n

# Number of maximum virtio crypto devices

CONFIG_RTE_MAX_VIRTIO_CRYPTO=32

# Compile PMD for AESNI backed device

CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n

# Compile PMD for Software backed device

CONFIG_RTE_LIBRTE_PMD_OPENSSL=n

# Compile PMD for AESNI GCM device

CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n

# Compile PMD for SNOW 3G device

CONFIG_RTE_LIBRTE_PMD_SNOW3G=n

CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n

# Compile PMD for KASUMI device

CONFIG_RTE_LIBRTE_PMD_KASUMI=n

# Compile PMD for ZUC device

CONFIG_RTE_LIBRTE_PMD_ZUC=n

# Compile PMD for Crypto Scheduler device

CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=n

# Compile PMD for NULL Crypto device

CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n

# Compile PMD for AMD CCP crypto device

CONFIG_RTE_LIBRTE_PMD_CCP=n

# Compile PMD for Marvell Crypto device

CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n

# Compile generic security library

CONFIG_RTE_LIBRTE_SECURITY=n

# Compile generic compression device library

CONFIG_RTE_LIBRTE_COMPRESSDEV=n

CONFIG_RTE_COMPRESS_MAX_DEVS=64

# Compile compressdev unit test

CONFIG_RTE_COMPRESSDEV_TEST=n

# Compile PMD for Octeontx ZIPVF compression device

CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=n

# Compile PMD for ISA-L compression device

CONFIG_RTE_LIBRTE_PMD_ISAL=n

# Compile PMD for ZLIB compression device

CONFIG_RTE_LIBRTE_PMD_ZLIB=n

# Compile generic event device library

CONFIG_RTE_LIBRTE_EVENTDEV=n

CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n

CONFIG_RTE_EVENT_MAX_DEVS=16

CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64

CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32

CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024

CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32

CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32

# Compile PMD for skeleton event device

CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=n

CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n

# Compile PMD for software event device

CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=n

# Compile PMD for distributed software event device

CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=n

# Compile PMD for octeontx sso event device

CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=n

# Compile PMD for OPDL event device

CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=n

# Compile PMD for NXP DPAA event device

CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n

# Compile PMD for NXP DPAA2 event device

CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n

# Compile raw device support

# EXPERIMENTAL: API may change without prior notice

CONFIG_RTE_LIBRTE_RAWDEV=n

CONFIG_RTE_RAWDEV_MAX_DEVS=10

CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=n

# Compile PMD for NXP DPAA2 CMDIF raw device

CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n

# Compile PMD for NXP DPAA2 QDMA raw device

CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n

# Compile PMD for Intel FPGA raw device

CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n

# Compile librte_ring

CONFIG_RTE_LIBRTE_RING=y

# Compile librte_mempool

CONFIG_RTE_LIBRTE_MEMPOOL=y

CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512

CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n

# Compile Mempool drivers

CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y

CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64

CONFIG_RTE_DRIVER_MEMPOOL_RING=y

CONFIG_RTE_DRIVER_MEMPOOL_STACK=y

# Compile PMD for octeontx fpa mempool device

CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=n

# Compile librte_mbuf

CONFIG_RTE_LIBRTE_MBUF=y

CONFIG_RTE_LIBRTE_MBUF_DEBUG=n

CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"

CONFIG_RTE_MBUF_REFCNT_ATOMIC=y

CONFIG_RTE_PKTMBUF_HEADROOM=128

# Compile librte_timer

CONFIG_RTE_LIBRTE_TIMER=n

CONFIG_RTE_LIBRTE_TIMER_DEBUG=n

# Compile librte_cfgfile

CONFIG_RTE_LIBRTE_CFGFILE=n

# Compile librte_cmdline

CONFIG_RTE_LIBRTE_CMDLINE=y

CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n

# Compile librte_hash

CONFIG_RTE_LIBRTE_HASH=y

CONFIG_RTE_LIBRTE_HASH_DEBUG=n

# Compile librte_efd

CONFIG_RTE_LIBRTE_EFD=n

# Compile librte_member

CONFIG_RTE_LIBRTE_MEMBER=y

# Compile librte_jobstats

CONFIG_RTE_LIBRTE_JOBSTATS=n

# Compile architecture we compile for. device metrics library

CONFIG_RTE_LIBRTE_METRICS=y

# Compile architecture we compile for. bitrate statistics library

CONFIG_RTE_LIBRTE_BITRATE=y

# Compile architecture we compile for. latency statistics library

CONFIG_RTE_LIBRTE_LATENCY_STATS=y

# Compile librte_telemetry

CONFIG_RTE_LIBRTE_TELEMETRY=n

# Compile librte_lpm

CONFIG_RTE_LIBRTE_LPM=n

CONFIG_RTE_LIBRTE_LPM_DEBUG=n

# Compile librte_acl

CONFIG_RTE_LIBRTE_ACL=n

CONFIG_RTE_LIBRTE_ACL_DEBUG=n

# Compile librte_power

CONFIG_RTE_LIBRTE_POWER=n

CONFIG_RTE_LIBRTE_POWER_DEBUG=n

CONFIG_RTE_MAX_LCORE_FREQS=64

# Compile librte_net

CONFIG_RTE_LIBRTE_NET=y

# Compile librte_ip_frag

CONFIG_RTE_LIBRTE_IP_FRAG=y

CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n

CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4

CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n

# Compile GRO library

CONFIG_RTE_LIBRTE_GRO=y

# Compile GSO library

CONFIG_RTE_LIBRTE_GSO=y

# Compile librte_meter

CONFIG_RTE_LIBRTE_METER=y

# Compile librte_classify

CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=n

# Compile librte_sched

CONFIG_RTE_LIBRTE_SCHED=n

CONFIG_RTE_SCHED_DEBUG=n

CONFIG_RTE_SCHED_RED=n

CONFIG_RTE_SCHED_COLLECT_STATS=n

CONFIG_RTE_SCHED_SUBPORT_TC_OV=n

CONFIG_RTE_SCHED_PORT_N_GRINDERS=8

CONFIG_RTE_SCHED_VECTOR=n

# Compile architecture we compile for. distributor library

CONFIG_RTE_LIBRTE_DISTRIBUTOR=n

# Compile architecture we compile for. reorder library

CONFIG_RTE_LIBRTE_REORDER=n

# Compile librte_port

CONFIG_RTE_LIBRTE_PORT=n

CONFIG_RTE_PORT_STATS_COLLECT=n

CONFIG_RTE_PORT_PCAP=n

# Compile librte_table

CONFIG_RTE_LIBRTE_TABLE=n

CONFIG_RTE_TABLE_STATS_COLLECT=n

# Compile librte_pipeline

CONFIG_RTE_LIBRTE_PIPELINE=n

CONFIG_RTE_PIPELINE_STATS_COLLECT=n

# Compile librte_kni

CONFIG_RTE_LIBRTE_KNI=n

CONFIG_RTE_LIBRTE_PMD_KNI=n

CONFIG_RTE_KNI_KMOD=n

CONFIG_RTE_KNI_KMOD_ETHTOOL=n

CONFIG_RTE_KNI_PREEMPT_DEFAULT=y

# Compile architecture we compile for. pdump library

CONFIG_RTE_LIBRTE_PDUMP=y

# Compile vhost user library

CONFIG_RTE_LIBRTE_VHOST=y

CONFIG_RTE_LIBRTE_VHOST_NUMA=y

CONFIG_RTE_LIBRTE_VHOST_DEBUG=n

# Compile vhost PMD

# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.

CONFIG_RTE_LIBRTE_PMD_VHOST=y

# Compile IFC driver

# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO

# should be enabled.

CONFIG_RTE_LIBRTE_IFC_PMD=n

# Compile librte_bpf

CONFIG_RTE_LIBRTE_BPF=n

# allow load BPF from ELF files (requires libelf)

CONFIG_RTE_LIBRTE_BPF_ELF=n

# Compile architecture we compile for. test application

CONFIG_RTE_APP_TEST=y

CONFIG_RTE_APP_TEST_RESOURCE_TAR=n

# Compile architecture we compile for. procinfo application

CONFIG_RTE_PROC_INFO=y

# Compile architecture we compile for. PMD test application

CONFIG_RTE_TEST_PMD=y

CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n

CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n

# Compile architecture we compile for. bbdev test application

CONFIG_RTE_TEST_BBDEV=n

# Compile architecture we compile for. crypto performance application

CONFIG_RTE_APP_CRYPTO_PERF=n

# Compile architecture we compile for. eventdev application

CONFIG_RTE_APP_EVENTDEV=n

CONFIG_RTE_EXEC_ENV_LINUXAPP=y

CONFIG_RTE_LIBRTE_VHOST_POSTCOPY=n

# Common libraries, before Bus/PMDs

# NXP DPAA BUS and drivers

# NXP FSLMC BUS and DPAA2 drivers

# NXP ENETC PMD Driver

CONFIG_RTE_ARCH_PPC_64=y

CONFIG_RTE_ARCH_64=y

CONFIG_RTE_TOOLCHAIN_GCC=y

# Note: Power doesn't have this support

# Note: Initially, all of architecture we compile for. PMD drivers compilation are turned off on Power

# Will turn on them only after architecture we compile for. successful testing on Power

CONFIG_RTE_LIBRTE_PMD_XENVIRT=n