diff --git a/.device-mapper-multipath.metadata b/.device-mapper-multipath.metadata new file mode 100644 index 0000000..4fb0280 --- /dev/null +++ b/.device-mapper-multipath.metadata @@ -0,0 +1 @@ +a8afc76e75aeaba7e21c066ca95e236be3bfc5b4 SOURCES/multipath-tools-0.8.6.tgz diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..4d2c931 --- /dev/null +++ b/.gitignore @@ -0,0 +1 @@ +SOURCES/multipath-tools-0.8.6.tgz diff --git a/SOURCES/0001-RH-fixup-udev-rules-for-redhat.patch b/SOURCES/0001-RH-fixup-udev-rules-for-redhat.patch new file mode 100644 index 0000000..e84f9e0 --- /dev/null +++ b/SOURCES/0001-RH-fixup-udev-rules-for-redhat.patch @@ -0,0 +1,63 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Thu, 13 Apr 2017 07:22:23 -0500 +Subject: [PATCH] RH: fixup udev rules for redhat + +The multipath rules need to run after scsi_id is run. This means moving +them after 60-persistent-storage.rules for redhat. Redhat also uses a +different naming scheme for partitions than SuSE. + +Signed-off-by: Benjamin Marzinski +--- + Makefile.inc | 2 +- + kpartx/kpartx.rules | 2 +- + multipath/Makefile | 4 ++-- + 3 files changed, 4 insertions(+), 4 deletions(-) + +diff --git a/Makefile.inc b/Makefile.inc +index f1e23131..c593fd3b 100644 +--- a/Makefile.inc ++++ b/Makefile.inc +@@ -55,7 +55,7 @@ endif + prefix = + exec_prefix = $(prefix) + usr_prefix = $(prefix) +-bindir = $(exec_prefix)/sbin ++bindir = $(exec_prefix)/usr/sbin + libudevdir = $(prefix)/$(SYSTEMDPATH)/udev + udevrulesdir = $(libudevdir)/rules.d + multipathdir = $(TOPDIR)/libmultipath +diff --git a/kpartx/kpartx.rules b/kpartx/kpartx.rules +index d7527d7d..0e0d70d5 100644 +--- a/kpartx/kpartx.rules ++++ b/kpartx/kpartx.rules +@@ -36,6 +36,6 @@ LABEL="mpath_kpartx_end" + GOTO="kpartx_end" + + LABEL="run_kpartx" +-RUN+="/sbin/kpartx -un -p -part /dev/$name" ++RUN+="/sbin/kpartx -un /dev/$name" + + LABEL="kpartx_end" +diff --git a/multipath/Makefile b/multipath/Makefile +index 0828a8f7..b9bbb3cf 100644 +--- a/multipath/Makefile ++++ b/multipath/Makefile +@@ -24,7 +24,7 @@ install: + $(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)/ + $(INSTALL_PROGRAM) -d $(DESTDIR)$(udevrulesdir) + $(INSTALL_PROGRAM) -m 644 11-dm-mpath.rules $(DESTDIR)$(udevrulesdir) +- $(INSTALL_PROGRAM) -m 644 $(EXEC).rules $(DESTDIR)$(libudevdir)/rules.d/56-multipath.rules ++ $(INSTALL_PROGRAM) -m 644 $(EXEC).rules $(DESTDIR)$(libudevdir)/rules.d/62-multipath.rules + $(INSTALL_PROGRAM) -d $(DESTDIR)$(man8dir) + $(INSTALL_PROGRAM) -m 644 $(EXEC).8.gz $(DESTDIR)$(man8dir) + $(INSTALL_PROGRAM) -d $(DESTDIR)$(man5dir) +@@ -33,7 +33,7 @@ install: + uninstall: + $(RM) $(DESTDIR)$(bindir)/$(EXEC) + $(RM) $(DESTDIR)$(udevrulesdir)/11-dm-mpath.rules +- $(RM) $(DESTDIR)$(libudevdir)/rules.d/56-multipath.rules ++ $(RM) $(DESTDIR)$(libudevdir)/rules.d/62-multipath.rules + $(RM) $(DESTDIR)$(man8dir)/$(EXEC).8.gz + $(RM) $(DESTDIR)$(man5dir)/$(EXEC).conf.5.gz + diff --git a/SOURCES/0002-RH-Remove-the-property-blacklist-exception-builtin.patch b/SOURCES/0002-RH-Remove-the-property-blacklist-exception-builtin.patch new file mode 100644 index 0000000..dcb1491 --- /dev/null +++ b/SOURCES/0002-RH-Remove-the-property-blacklist-exception-builtin.patch @@ -0,0 +1,101 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Wed, 2 Jul 2014 12:49:53 -0500 +Subject: [PATCH] RH: Remove the property blacklist exception builtin + +Multipath set the default property blacklist exceptions to +(ID_SCSI_VPD|ID_WWN). This has the effect of blacklisting some internal +devices. These devices may never have multiple paths, but it is nice +to be able to set multipath up on them all the same. This patch simply +removes the default, and makes it so that if no property +blacklist_exception is given, then devices aren't failed for not matching +it. + +Signed-off-by: Benjamin Marzinski +--- + libmultipath/blacklist.c | 6 ++---- + multipath/multipath.conf.5 | 11 ++++++----- + tests/blacklist.c | 7 ++----- + 3 files changed, 10 insertions(+), 14 deletions(-) + +diff --git a/libmultipath/blacklist.c b/libmultipath/blacklist.c +index 6c6a5979..785f5ee9 100644 +--- a/libmultipath/blacklist.c ++++ b/libmultipath/blacklist.c +@@ -201,9 +201,6 @@ setup_default_blist (struct config * conf) + if (store_ble(conf->blist_devnode, "!^(sd[a-z]|dasd[a-z]|nvme[0-9])", ORIGIN_DEFAULT)) + return 1; + +- if (store_ble(conf->elist_property, "(SCSI_IDENT_|ID_WWN)", ORIGIN_DEFAULT)) +- return 1; +- + vector_foreach_slot (conf->hwtable, hwe, i) { + if (hwe->bl_product) { + if (find_blacklist_device(conf->blist_device, +@@ -407,7 +404,8 @@ filter_property(const struct config *conf, struct udev_device *udev, + *uid_attribute != '\0'; + bool uid_attr_seen = false; + +- r = MATCH_PROPERTY_BLIST_MISSING; ++ if (VECTOR_SIZE(conf->elist_property)) ++ r = MATCH_PROPERTY_BLIST_MISSING; + udev_list_entry_foreach(list_entry, + udev_device_get_properties_list_entry(udev)) { + +diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5 +index 064e4826..0d2bce09 100644 +--- a/multipath/multipath.conf.5 ++++ b/multipath/multipath.conf.5 +@@ -1347,9 +1347,14 @@ keywords. Both are regular expressions. For a full description of these keywords + Regular expression for an udev property. All + devices that have matching udev properties will be excluded/included. + The handling of the \fIproperty\fR keyword is special, +-because devices \fBmust\fR have at least one whitelisted udev property; ++because if a property blacklist_exception is set, devices \fBmust\fR have at ++least one whitelisted udev property; + otherwise they're treated as blacklisted, and the message + "\fIblacklisted, udev property missing\fR" is displayed in the logs. ++For example, setting the property blacklist_exception to ++\fB(SCSI_IDENT_|ID_WWN)\fR, will cause well-behaved SCSI devices and devices ++that provide a WWN (World Wide Number) to be included, and all others to be ++excluded. This works to exclude most non-multipathable devices. + . + .RS + .PP +@@ -1360,10 +1365,6 @@ Blacklisting by missing properties is only applied to devices which do have the + property specified by \fIuid_attribute\fR (e.g. \fIID_SERIAL\fR) + set. Previously, it was applied to every device, possibly causing devices to be + blacklisted because of temporary I/O error conditions. +-.PP +-The default \fIblacklist exception\fR is: \fB(SCSI_IDENT_|ID_WWN)\fR, causing +-well-behaved SCSI devices and devices that provide a WWN (World Wide Number) +-to be included, and all others to be excluded. + .RE + .TP + .B protocol +diff --git a/tests/blacklist.c b/tests/blacklist.c +index 882aa3a1..6a22b660 100644 +--- a/tests/blacklist.c ++++ b/tests/blacklist.c +@@ -375,9 +375,8 @@ static void test_property_missing(void **state) + { + static struct udev_device udev = { "sdb", { "ID_FOO", "ID_BAZ", "ID_BAR", "ID_SERIAL", NULL } }; + conf.blist_property = blist_property_wwn; +- expect_condlog(3, "sdb: blacklisted, udev property missing\n"); + assert_int_equal(filter_property(&conf, &udev, 3, "ID_SERIAL"), +- MATCH_PROPERTY_BLIST_MISSING); ++ MATCH_NOTHING); + assert_int_equal(filter_property(&conf, &udev, 3, "ID_BLAH"), + MATCH_NOTHING); + assert_int_equal(filter_property(&conf, &udev, 3, ""), +@@ -469,9 +468,7 @@ static void test_filter_path_missing1(void **state) + conf.blist_device = blist_device_foo_bar; + conf.blist_protocol = blist_protocol_fcp; + conf.blist_wwid = blist_wwid_xyzzy; +- expect_condlog(3, "sdb: blacklisted, udev property missing\n"); +- assert_int_equal(filter_path(&conf, &miss1_pp), +- MATCH_PROPERTY_BLIST_MISSING); ++ assert_int_equal(filter_path(&conf, &miss1_pp), MATCH_NOTHING); + } + + /* This one matches the property whitelist, to test the other missing diff --git a/SOURCES/0003-RH-don-t-start-without-a-config-file.patch b/SOURCES/0003-RH-don-t-start-without-a-config-file.patch new file mode 100644 index 0000000..1d5c693 --- /dev/null +++ b/SOURCES/0003-RH-don-t-start-without-a-config-file.patch @@ -0,0 +1,94 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Wed, 15 Oct 2014 10:39:30 -0500 +Subject: [PATCH] RH: don't start without a config file + +If /etc/multipath.conf doesn't exist, don't start multipathd and blacklist +all devices when running multipath. A completely blank configuration file +is almost never what users want. Also, people may have the multipath +packages installed but don't want to use them. This patch provides a +simple way to disable multipath. Simply removing or renaming +/etc/multipath.conf will keep multipath from doing anything. + +Signed-off-by: Benjamin Marzinski +--- + libmultipath/config.c | 13 +++++++++++++ + libmultipath/config.h | 1 + + multipath/multipath.rules | 1 + + multipathd/multipathd.8 | 2 ++ + multipathd/multipathd.service | 1 + + 5 files changed, 18 insertions(+) + +diff --git a/libmultipath/config.c b/libmultipath/config.c +index 30046a17..5f35c3d3 100644 +--- a/libmultipath/config.c ++++ b/libmultipath/config.c +@@ -895,6 +895,19 @@ int _init_config (const char *file, struct config *conf) + goto out; + } + factorize_hwtable(conf->hwtable, builtin_hwtable_size, file); ++ } else { ++ condlog(0, "/etc/multipath.conf does not exist, blacklisting all devices."); ++ if (conf->blist_devnode == NULL) { ++ conf->blist_devnode = vector_alloc(); ++ if (!conf->blist_devnode) { ++ condlog(0, "cannot allocate blacklist\n"); ++ goto out; ++ } ++ } ++ if (store_ble(conf->blist_devnode, ".*", ORIGIN_NO_CONFIG)) { ++ condlog(0, "cannot store default no-config blacklist\n"); ++ goto out; ++ } + } + + conf->processed_main_config = 1; +diff --git a/libmultipath/config.h b/libmultipath/config.h +index 933fe0d1..5f01c1fc 100644 +--- a/libmultipath/config.h ++++ b/libmultipath/config.h +@@ -9,6 +9,7 @@ + + #define ORIGIN_DEFAULT 0 + #define ORIGIN_CONFIG 1 ++#define ORIGIN_NO_CONFIG 2 + + enum devtypes { + DEV_NONE, +diff --git a/multipath/multipath.rules b/multipath/multipath.rules +index 9df11a95..0486bf70 100644 +--- a/multipath/multipath.rules ++++ b/multipath/multipath.rules +@@ -9,6 +9,7 @@ IMPORT{cmdline}="nompath" + ENV{nompath}=="?*", GOTO="end_mpath" + IMPORT{cmdline}="multipath" + ENV{multipath}=="off", GOTO="end_mpath" ++TEST!="/etc/multipath.conf", GOTO="end_mpath" + + ENV{DEVTYPE}!="partition", GOTO="test_dev" + IMPORT{parent}="DM_MULTIPATH_DEVICE_PATH" +diff --git a/multipathd/multipathd.8 b/multipathd/multipathd.8 +index 048a838d..8bd47a80 100644 +--- a/multipathd/multipathd.8 ++++ b/multipathd/multipathd.8 +@@ -39,6 +39,8 @@ map regains its maximum performance and redundancy. + This daemon executes the external \fBmultipath\fR tool when events occur. + In turn, the multipath tool signals the multipathd daemon when it is done with + devmap reconfiguration, so that it can refresh its failed path list. ++ ++In this Linux distribution, multipathd does not run unless a /etc/multipath.conf file exists. + . + . + .\" ---------------------------------------------------------------------------- +diff --git a/multipathd/multipathd.service b/multipathd/multipathd.service +index 7d547fa7..af592057 100644 +--- a/multipathd/multipathd.service ++++ b/multipathd/multipathd.service +@@ -4,6 +4,7 @@ Wants=systemd-udev-trigger.service systemd-udev-settle.service + Before=iscsi.service iscsid.service lvm2-activation-early.service + Before=local-fs-pre.target blk-availability.service shutdown.target + After=multipathd.socket systemd-udev-trigger.service systemd-udev-settle.service ++ConditionPathExists=/etc/multipath.conf + DefaultDependencies=no + Conflicts=shutdown.target + ConditionKernelCommandLine=!nompath diff --git a/SOURCES/0004-RH-Fix-nvme-function-missing-argument.patch b/SOURCES/0004-RH-Fix-nvme-function-missing-argument.patch new file mode 100644 index 0000000..ced7159 --- /dev/null +++ b/SOURCES/0004-RH-Fix-nvme-function-missing-argument.patch @@ -0,0 +1,26 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Fri, 25 Jan 2019 14:54:56 -0600 +Subject: [PATCH] RH: Fix nvme function missing argument + +A future patch will change the compilation options to error when +function declarations have unspecified arguments. + +Signed-off-by: Benjamin Marzinski +--- + libmultipath/nvme/argconfig.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/libmultipath/nvme/argconfig.h b/libmultipath/nvme/argconfig.h +index adb192b6..bfd10ef8 100644 +--- a/libmultipath/nvme/argconfig.h ++++ b/libmultipath/nvme/argconfig.h +@@ -76,7 +76,7 @@ struct argconfig_commandline_options { + extern "C" { + #endif + +-typedef void argconfig_help_func(); ++typedef void argconfig_help_func(void); + void argconfig_append_usage(const char *str); + void argconfig_print_help(const char *program_desc, + const struct argconfig_commandline_options *options); diff --git a/SOURCES/0005-RH-use-rpm-optflags-if-present.patch b/SOURCES/0005-RH-use-rpm-optflags-if-present.patch new file mode 100644 index 0000000..debec54 --- /dev/null +++ b/SOURCES/0005-RH-use-rpm-optflags-if-present.patch @@ -0,0 +1,57 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Wed, 19 Apr 2017 06:10:01 -0500 +Subject: [PATCH] RH: use rpm optflags if present + +Use the passed in optflags when compiling as an RPM, and keep the +default flags as close as possible to the current fedora flags, while +still being generic. + +Signed-off-by: Benjamin Marzinski +--- + Makefile.inc | 24 ++++++++++++++++++------ + 1 file changed, 18 insertions(+), 6 deletions(-) + +diff --git a/Makefile.inc b/Makefile.inc +index c593fd3b..87fb39f2 100644 +--- a/Makefile.inc ++++ b/Makefile.inc +@@ -92,15 +92,27 @@ TEST_CC_OPTION = $(shell \ + echo "$(2)"; \ + fi) + +-STACKPROT := $(call TEST_CC_OPTION,-fstack-protector-strong,-fstack-protector) + ERROR_DISCARDED_QUALIFIERS := $(call TEST_CC_OPTION,-Werror=discarded-qualifiers,) + WNOCLOBBERED := $(call TEST_CC_OPTION,-Wno-clobbered -Wno-error=clobbered,) + +-OPTFLAGS := -O2 -g $(STACKPROT) --param=ssp-buffer-size=4 +-WARNFLAGS := -Werror -Wall -Wextra -Wformat=2 -Werror=implicit-int \ ++ifndef RPM_OPT_FLAGS ++ STACKPROT := $(call TEST_CC_OPTION,-fstack-protector-strong,-fstack-protector) ++ OPTFLAGS := -O2 -g -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions \ ++ $(STACKPROT) -grecord-gcc-switches \ ++ -fasynchronous-unwind-tables --param=ssp-buffer-size=4 ++ ifeq ($(shell test -f /usr/lib/rpm/redhat/redhat-hardened-cc1 && echo 1),1) ++ OPTFLAGS += -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ++ endif ++ ifeq ($(shell test -f /usr/lib/rpm/redhat/redhat-annobin-cc1 && echo 1),1) ++ OPTFLAGS += -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 ++ endif ++else ++ OPTFLAGS := $(RPM_OPT_FLAGS) --param=ssp-buffer-size=4 ++endif ++WARNFLAGS := -Werror -Wextra -Wformat=2 -Werror=implicit-int \ + -Werror=implicit-function-declaration -Werror=format-security \ +- $(WNOCLOBBERED) -Werror=cast-qual $(ERROR_DISCARDED_QUALIFIERS) +-CPPFLAGS := -Wp,-D_FORTIFY_SOURCE=2 ++ $(WNOCLOBBERED) -Werror=cast-qual $(ERROR_DISCARDED_QUALIFIERS) \ ++ -Wstrict-prototypes + CFLAGS := --std=gnu99 $(CFLAGS) $(OPTFLAGS) $(WARNFLAGS) -pipe \ + -DBIN_DIR=\"$(bindir)\" -DLIB_STRING=\"${LIB}\" -DRUN_DIR=\"${RUN}\" \ + -MMD -MP +@@ -138,4 +150,4 @@ check_file = $(shell \ + + %.o: %.c + @echo building $@ because of $? +- $(CC) $(CFLAGS) $(CPPFLAGS) -c -o $@ $< ++ $(CC) $(CFLAGS) -c -o $@ $< diff --git a/SOURCES/0006-RH-add-mpathconf.patch b/SOURCES/0006-RH-add-mpathconf.patch new file mode 100644 index 0000000..d262f55 --- /dev/null +++ b/SOURCES/0006-RH-add-mpathconf.patch @@ -0,0 +1,771 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Thu, 16 Oct 2014 15:49:01 -0500 +Subject: [PATCH] RH: add mpathconf + +mpathconf is a program (largely based on lvmcomf) to help users +configure /etc/multipath.conf and enable or disable multipathing. It +has a couple of built-in options that can be set directly from the +command line. But, mostly it is used to get a multipath.conf file +with the OS defaults, and to enable and disable multipathing via +a single command. + +Signed-off-by: Benjamin Marzinski +--- + libmultipath/config.c | 2 + + multipath/Makefile | 5 + + multipath/mpathconf | 555 ++++++++++++++++++++++++++++++++++++++++++ + multipath/mpathconf.8 | 135 ++++++++++ + 4 files changed, 697 insertions(+) + create mode 100644 multipath/mpathconf + create mode 100644 multipath/mpathconf.8 + +diff --git a/libmultipath/config.c b/libmultipath/config.c +index 5f35c3d3..cee3bbb7 100644 +--- a/libmultipath/config.c ++++ b/libmultipath/config.c +@@ -897,6 +897,8 @@ int _init_config (const char *file, struct config *conf) + factorize_hwtable(conf->hwtable, builtin_hwtable_size, file); + } else { + condlog(0, "/etc/multipath.conf does not exist, blacklisting all devices."); ++ condlog(0, "You can run \"/sbin/mpathconf --enable\" to create"); ++ condlog(0, "/etc/multipath.conf. See man mpathconf(8) for more details"); + if (conf->blist_devnode == NULL) { + conf->blist_devnode = vector_alloc(); + if (!conf->blist_devnode) { +diff --git a/multipath/Makefile b/multipath/Makefile +index b9bbb3cf..e720c7f6 100644 +--- a/multipath/Makefile ++++ b/multipath/Makefile +@@ -18,10 +18,12 @@ $(EXEC): $(OBJS) $(multipathdir)/libmultipath.so $(mpathcmddir)/libmpathcmd.so + $(CC) $(CFLAGS) $(OBJS) -o $(EXEC) $(LDFLAGS) $(LIBDEPS) + $(GZIP) $(EXEC).8 > $(EXEC).8.gz + $(GZIP) $(EXEC).conf.5 > $(EXEC).conf.5.gz ++ $(GZIP) mpathconf.8 > mpathconf.8.gz + + install: + $(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir) + $(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)/ ++ $(INSTALL_PROGRAM) -m 755 mpathconf $(DESTDIR)$(bindir)/ + $(INSTALL_PROGRAM) -d $(DESTDIR)$(udevrulesdir) + $(INSTALL_PROGRAM) -m 644 11-dm-mpath.rules $(DESTDIR)$(udevrulesdir) + $(INSTALL_PROGRAM) -m 644 $(EXEC).rules $(DESTDIR)$(libudevdir)/rules.d/62-multipath.rules +@@ -29,13 +31,16 @@ install: + $(INSTALL_PROGRAM) -m 644 $(EXEC).8.gz $(DESTDIR)$(man8dir) + $(INSTALL_PROGRAM) -d $(DESTDIR)$(man5dir) + $(INSTALL_PROGRAM) -m 644 $(EXEC).conf.5.gz $(DESTDIR)$(man5dir) ++ $(INSTALL_PROGRAM) -m 644 mpathconf.8.gz $(DESTDIR)$(man8dir) + + uninstall: + $(RM) $(DESTDIR)$(bindir)/$(EXEC) + $(RM) $(DESTDIR)$(udevrulesdir)/11-dm-mpath.rules + $(RM) $(DESTDIR)$(libudevdir)/rules.d/62-multipath.rules ++ $(RM) $(DESTDIR)$(bindir)/mpathconf + $(RM) $(DESTDIR)$(man8dir)/$(EXEC).8.gz + $(RM) $(DESTDIR)$(man5dir)/$(EXEC).conf.5.gz ++ $(RM) $(DESTDIR)$(man8dir)/mpathconf.8.gz + + clean: dep_clean + $(RM) core *.o $(EXEC) *.gz +diff --git a/multipath/mpathconf b/multipath/mpathconf +new file mode 100644 +index 00000000..2f4f3eaf +--- /dev/null ++++ b/multipath/mpathconf +@@ -0,0 +1,555 @@ ++#!/bin/bash ++# ++# Copyright (C) 2010 Red Hat, Inc. All rights reserved. ++# ++# This file is part of the device-mapper-multipath package. ++# ++# This copyrighted material is made available to anyone wishing to use, ++# modify, copy, or redistribute it subject to the terms and conditions ++# of the GNU General Public License v.2. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software Foundation, ++# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ ++# ++# Simple editting of /etc/multipath.conf ++# This program was largely ripped off from lvmconf ++# ++ ++unset ENABLE FIND FRIENDLY PROPERTY FOREIGN MODULE MULTIPATHD HAVE_DISABLE HAVE_WWID_DISABLE HAVE_FIND HAVE_BLACKLIST HAVE_EXCEPTIONS HAVE_DEFAULTS HAVE_FRIENDLY HAVE_PROPERTY HAVE_FOREIGN HAVE_MULTIPATHD HAVE_MODULE HAVE_OUTFILE SHOW_STATUS CHANGED_CONFIG WWID_LIST ++ ++DEFAULT_CONFIG="# device-mapper-multipath configuration file ++ ++# For a complete list of the default configuration values, run either: ++# # multipath -t ++# or ++# # multipathd show config ++ ++# For a list of configuration options with descriptions, see the ++# multipath.conf man page. ++ ++defaults { ++ user_friendly_names yes ++ find_multipaths yes ++ enable_foreign \"^$\" ++} ++ ++blacklist_exceptions { ++ property \"(SCSI_IDENT_|ID_WWN)\" ++}" ++ ++CONFIGFILE="/etc/multipath.conf" ++OUTPUTFILE="/etc/multipath.conf" ++MULTIPATHDIR="/etc/multipath" ++TMPFILE="/etc/multipath/.multipath.conf.tmp" ++WWIDS=0 ++ ++function usage ++{ ++ echo "usage: $0 " ++ echo "" ++ echo "Commands:" ++ echo "Enable: --enable " ++ echo "Disable: --disable" ++ echo "Only allow certain wwids (instead of enable): --allow " ++ echo "Set user_friendly_names (Default y): --user_friendly_names " ++ echo "Set find_multipaths (Default y): --find_multipaths " ++ echo "Set default property blacklist (Default y): --property_blacklist " ++ echo "Set enable_foreign to show foreign devices (Default n): --enable_foreign " ++ echo "Load the dm-multipath modules on enable (Default y): --with_module " ++ echo "start/stop/reload multipathd (Default n): --with_multipathd " ++ echo "select output file (Default /etc/multipath.conf): --outfile " ++ echo "" ++} ++ ++function add_wwid ++{ ++ INDEX=0 ++ while [ "$INDEX" -lt "$WWIDS" ] ; do ++ if [ "$1" = "${WWID_LIST[$INDEX]}" ] ; then ++ return ++ fi ++ ((INDEX++)) ++ done ++ WWID_LIST[$WWIDS]="$1" ++ ((WWIDS++)) ++} ++ ++function get_dm_deps ++{ ++ shift 3 ++ while [ -n "$1" -a -n "$2" ]; do ++ MAJOR=$(echo $1 | tr -d '(,') ++ MINOR=$(echo $2 | tr -d ')') ++ UUID=`dmsetup info -c --noheadings -o uuid -j $MAJOR -m $MINOR 2> /dev/null` ++ if [ -n "$UUID" ] ; then ++ set_dm_wwid $UUID ++ fi ++ shift 2 ++ done ++} ++ ++function set_dm_wwid ++{ ++ if [[ "$1" =~ ^part[[:digit:]]+-mpath- ]] ; then ++ add_wwid "${1##part*-mpath-}" ++ elif [[ "$1" =~ ^mpath- ]] ; then ++ add_wwid "${1##mpath-}" ++ else ++ get_dm_deps `dmsetup deps -u $1` ++ fi ++} ++ ++function set_wwid ++{ ++ UUID="" ++ if [[ "$1" =~ ^[[:digit:]]+:[[:digit:]]+$ ]] ; then ++ MAJOR=${1%%:*} ++ MINOR=${1##*:} ++ UUID=`dmsetup info -c --noheadings -o uuid -j $MAJOR -m $MINOR 2> /dev/null` ++ else ++ UUID=`dmsetup info -c --noheadings -o uuid $1 2> /dev/null` ++ fi ++ if [ -n "$UUID" ] ; then ++ set_dm_wwid $UUID ++ else ++ add_wwid "$1" ++ fi ++} ++ ++function parse_args ++{ ++ while [ -n "$1" ]; do ++ case $1 in ++ --enable) ++ ENABLE=1 ++ shift ++ ;; ++ --disable) ++ ENABLE=0 ++ shift ++ ;; ++ --allow) ++ ENABLE=2 ++ if [ -n "$2" ]; then ++ set_wwid $2 ++ shift 2 ++ else ++ usage ++ exit 1 ++ fi ++ ;; ++ --user_friendly_names) ++ if [ -n "$2" ]; then ++ FRIENDLY=$2 ++ shift 2 ++ else ++ usage ++ exit 1 ++ fi ++ ;; ++ --find_multipaths) ++ if [ -n "$2" ]; then ++ FIND=$2 ++ shift 2 ++ else ++ usage ++ exit 1 ++ fi ++ ;; ++ --property_blacklist) ++ if [ -n "$2" ]; then ++ PROPERTY=$2 ++ shift 2 ++ else ++ usage ++ exit 1 ++ fi ++ ;; ++ --enable_foreign) ++ if [ -n "$2" ]; then ++ FOREIGN=$2 ++ shift 2 ++ else ++ usage ++ exit 1 ++ fi ++ ;; ++ --with_module) ++ if [ -n "$2" ]; then ++ MODULE=$2 ++ shift 2 ++ else ++ usage ++ exit 1 ++ fi ++ ;; ++ --with_multipathd) ++ if [ -n "$2" ]; then ++ MULTIPATHD=$2 ++ shift 2 ++ else ++ usage ++ exit 1 ++ fi ++ ;; ++ --outfile) ++ if [ -n "$2" ]; then ++ OUTPUTFILE=$2 ++ HAVE_OUTFILE=1 ++ shift 2 ++ else ++ usage ++ exit 1 ++ fi ++ ;; ++ *) ++ usage ++ exit ++ esac ++ done ++} ++ ++function validate_args ++{ ++ if [ "$ENABLE" = "0" ] && [ -n "$FRIENDLY" -o -n "$FIND" -o -n "$PROPERTY" -o -n "$MODULE" ]; then ++ echo "ignoring extra parameters on disable" ++ FRIENDLY="" ++ FIND="" ++ PROPERTY="" ++ MODULE="" ++ fi ++ if [ -n "$FRIENDLY" ] && [ "$FRIENDLY" != "y" -a "$FRIENDLY" != "n" ]; then ++ echo "--user_friendly_names must be either 'y' or 'n'" ++ exit 1 ++ fi ++ if [ "$FIND" = "y" ]; then ++ FIND="yes" ++ elif [ "$FIND" = "n" ]; then ++ FIND="no" ++ elif [ -n "$FIND" ] && [ "$FIND" != "yes" -a "$FIND" != "no" -a "$FIND" != "strict" -a "$FIND" != "greedy" -a "$FIND" != "smart" ]; then ++ echo "--find_multipaths must be one of 'yes' 'no' 'strict' 'greedy' or 'smart'" ++ exit 1 ++ fi ++ if [ -n "$PROPERTY" ] && [ "$PROPERTY" != "y" -a "$PROPERTY" != "n" ]; then ++ echo "--property_blacklist must be either 'y' or 'n'" ++ exit 1 ++ fi ++ if [ -n "$FOREIGN" ] && [ "$FOREIGN" != "y" -a "$FOREIGN" != "n" ]; then ++ echo "--enable_foreign must be either 'y' or 'n'" ++ exit 1 ++ fi ++ if [ -z "$ENABLE" -a -z "$FIND" -a -z "$FRIENDLY" -a -z "$PROPERTY" ]; then ++ SHOW_STATUS=1 ++ fi ++ if [ -n "$MODULE" ] && [ "$MODULE" != "y" -a "$MODULE" != "n" ]; then ++ echo "--with_module must be either 'y' or 'n'" ++ exit 1 ++ fi ++ if [ -n "$MULTIPATHD" ] && [ "$MULTIPATHD" != "y" -a "$MULTIPATHD" != "n" ]; then ++ echo "--with_multipathd must be either 'y' or 'n'" ++ exit 1 ++ fi ++ if [ "$ENABLE" = 2 -a -z "$HAVE_OUTFILE" ]; then ++ echo "Because --allow makes changes that cannot be automatically reversed," ++ echo "you must set --outfile when you set --allow" ++ exit 1 ++ fi ++} ++ ++function add_blacklist_exceptions ++{ ++ INDEX=0 ++ while [ "$INDEX" -lt "$WWIDS" ] ; do ++ sed -i '/^blacklist_exceptions[[:space:]]*{/ a\ ++ wwid '"\"${WWID_LIST[$INDEX]}\""' ++' $TMPFILE ++ ((INDEX++)) ++ done ++} ++ ++umask 0077 ++ ++parse_args "$@" ++ ++validate_args ++ ++if [ ! -d "$MULTIPATHDIR" ]; then ++ echo "/etc/multipath/ does not exist. failing" ++ exit 1 ++fi ++ ++rm $TMPFILE 2> /dev/null ++echo "$DEFAULT_CONFIG" > $TMPFILE ++if [ -f "$CONFIGFILE" ]; then ++ cp $CONFIGFILE $TMPFILE ++fi ++ ++if grep -q "^blacklist[[:space:]]*{" $TMPFILE ; then ++ HAVE_BLACKLIST=1 ++fi ++ ++if grep -q "^blacklist_exceptions[[:space:]]*{" $TMPFILE ; then ++ HAVE_EXCEPTIONS=1 ++fi ++ ++if grep -q "^defaults[[:space:]]*{" $TMPFILE ; then ++ HAVE_DEFAULTS=1 ++fi ++ ++if [ -z "$MODULE" -o "$MODULE" = "y" ]; then ++ if lsmod | grep -q "dm_multipath" ; then ++ HAVE_MODULE=1 ++ else ++ HAVE_MODULE=0 ++ fi ++fi ++ ++if [ "$MULTIPATHD" = "y" ]; then ++ if /bin/systemctl status multipathd.service > /dev/null 2>&1 ; then ++ HAVE_MULTIPATHD=1 ++ else ++ HAVE_MULTIPATHD=0 ++ fi ++fi ++ ++if [ "$HAVE_BLACKLIST" = "1" ]; then ++ if sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*devnode \"\.\?\*\"" ; then ++ HAVE_DISABLE=1 ++ elif sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*#[[:space:]]*devnode \"\.\?\*\"" ; then ++ HAVE_DISABLE=0 ++ fi ++fi ++ ++if [ "$HAVE_BLACKLIST" = "1" ]; then ++ if sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*wwid \"\.\?\*\"" ; then ++ HAVE_WWID_DISABLE=1 ++ elif sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*#[[:space:]]*wwid \"\.\?\*\"" ; then ++ HAVE_WWID_DISABLE=0 ++ fi ++fi ++ ++if [ "$HAVE_DEFAULTS" = "1" ]; then ++ HAVE_FIND=`sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | sed -n 's/^[[:blank:]]*find_multipaths[[:blank:]]*\([^[:blank:]]*\).*$/\1/p' | sed -n 1p` ++ if [ "$HAVE_FIND" = "1" ]; then ++ HAVE_FIND="yes" ++ elif [ "$HAVE_FIND" = "0" ]; then ++ HAVE_FIND="no" ++ fi ++ if sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*user_friendly_names[[:space:]]*\(yes\|1\)" ; then ++ HAVE_FRIENDLY=1 ++ elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*user_friendly_names[[:space:]]*\(no\|0\)" ; then ++ HAVE_FRIENDLY=0 ++ fi ++ if sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*#[[:space:]]*enable_foreign" ; then ++ HAVE_FOREIGN=0 ++ elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*enable_foreign[[:space:]]*\"\^\$\"" ; then ++ HAVE_FOREIGN=1 ++ elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*enable_foreign" ; then ++ HAVE_FOREIGN=2 ++ fi ++fi ++ ++if [ "$HAVE_EXCEPTIONS" = "1" ]; then ++ if sed -n '/^blacklist_exceptions[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*property[[:space:]]*\"(SCSI_IDENT_|ID_WWN)\"" ; then ++ HAVE_PROPERTY=1 ++ elif sed -n '/^blacklist_exceptions[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*#[[:space:]]*property[[:space:]]*\"(SCSI_IDENT_|ID_WWN)\"" ; then ++ HAVE_PROPERTY=0 ++ fi ++fi ++ ++if [ -n "$SHOW_STATUS" ]; then ++ if [ -z "$HAVE_DISABLE" -o "$HAVE_DISABLE" = 0 ]; then ++ echo "multipath is enabled" ++ else ++ echo "multipath is disabled" ++ fi ++ if [ -z "$HAVE_FIND" ]; then ++ echo "find_multipaths is no" ++ else ++ echo "find_multipaths is $HAVE_FIND" ++ fi ++ if [ -z "$HAVE_FRIENDLY" -o "$HAVE_FRIENDLY" = 0 ]; then ++ echo "user_friendly_names is disabled" ++ else ++ echo "user_friendly_names is enabled" ++ fi ++ if [ -z "$HAVE_PROPERTY" -o "$HAVE_PROPERTY" = 0 ]; then ++ echo "default property blacklist is disabled" ++ else ++ echo "default property blacklist is enabled" ++ fi ++ if [ -z "$HAVE_FOREIGN" -o "$HAVE_FOREIGN" = 0 ]; then ++ echo "enable_foreign is not set (all foreign multipath devices will be shown)" ++ elif [ "$HAVE_FOREIGN" = 1 ]; then ++ echo "enable_foreign is set (no foreign multipath devices will be shown)" ++ else ++ echo "enable_foreign is set (foreign multipath devices may not be shown)" ++ fi ++ if [ -n "$HAVE_MODULE" ]; then ++ if [ "$HAVE_MODULE" = 1 ]; then ++ echo "dm_multipath module is loaded" ++ else ++ echo "dm_multipath module is not loaded" ++ fi ++ fi ++ if [ -z "$HAVE_MULTIPATHD" ]; then ++ if /bin/systemctl status multipathd.service > /dev/null 2>&1 ; then ++ HAVE_MULTIPATHD=1 ++ else ++ HAVE_MULTIPATHD=0 ++ fi ++ fi ++ if [ "$HAVE_MULTIPATHD" = 1 ]; then ++ echo "multipathd is running" ++ else ++ echo "multipathd is not running" ++ fi ++ exit 0 ++fi ++ ++if [ -z "$HAVE_BLACKLIST" ]; then ++ cat >> $TMPFILE <<- _EOF_ ++ ++blacklist { ++} ++_EOF_ ++fi ++ ++if [ -z "$HAVE_DEFAULTS" ]; then ++ cat >> $TMPFILE <<- _EOF_ ++ ++defaults { ++} ++_EOF_ ++fi ++ ++if [ "$ENABLE" = 2 ]; then ++ if [ "$HAVE_DISABLE" = 1 ]; then ++ sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*devnode \"\.\?\*\"/# devnode ".*"/' $TMPFILE ++ fi ++ if [ -z "$HAVE_WWID_DISABLE" ]; then ++ sed -i '/^blacklist[[:space:]]*{/ a\ ++ wwid ".*" ++' $TMPFILE ++ elif [ "$HAVE_WWID_DISABLE" = 0 ]; then ++ sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*#[[:space:]]*wwid \"\.\?\*\"/ wwid ".*"/' $TMPFILE ++ fi ++ if [ "$HAVE_EXCEPTIONS" = 1 ]; then ++ sed -i '/^blacklist_exceptions[[:space:]]*{/,/^}/ {/^[[:space:]]*wwid/ d}' $TMPFILE ++ else ++ cat >> $TMPFILE <<- _EOF_ ++ ++blacklist_exceptions { ++} ++_EOF_ ++ fi ++ add_blacklist_exceptions ++elif [ "$ENABLE" = 1 ]; then ++ if [ "$HAVE_DISABLE" = 1 ]; then ++ sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*devnode \"\.\?\*\"/# devnode ".*"/' $TMPFILE ++ fi ++elif [ "$ENABLE" = 0 ]; then ++ if [ -z "$HAVE_DISABLE" ]; then ++ sed -i '/^blacklist[[:space:]]*{/ a\ ++ devnode ".*" ++' $TMPFILE ++ elif [ "$HAVE_DISABLE" = 0 ]; then ++ sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*#[[:space:]]*devnode \"\.\?\*\"/ devnode ".*"/' $TMPFILE ++ fi ++fi ++ ++if [ -n "$FIND" ]; then ++ if [ -z "$HAVE_FIND" ]; then ++ sed -i '/^defaults[[:space:]]*{/ a\ ++ find_multipaths '"$FIND"' ++' $TMPFILE ++ CHANGED_CONFIG=1 ++ elif [ "$FIND" != "$HAVE_FIND" ]; then ++ sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:blank:]]*find_multipaths[[:blank:]]*[^[:blank:]]*/ find_multipaths '"$FIND"'/' $TMPFILE ++ CHANGED_CONFIG=1 ++ fi ++fi ++ ++if [ "$FRIENDLY" = "n" ]; then ++ if [ "$HAVE_FRIENDLY" = 1 ]; then ++ sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*user_friendly_names[[:space:]]*\(yes\|1\)/ user_friendly_names no/' $TMPFILE ++ CHANGED_CONFIG=1 ++ fi ++elif [ "$FRIENDLY" = "y" ]; then ++ if [ -z "$HAVE_FRIENDLY" ]; then ++ sed -i '/^defaults[[:space:]]*{/ a\ ++ user_friendly_names yes ++' $TMPFILE ++ CHANGED_CONFIG=1 ++ elif [ "$HAVE_FRIENDLY" = 0 ]; then ++ sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*user_friendly_names[[:space:]]*\(no\|0\)/ user_friendly_names yes/' $TMPFILE ++ CHANGED_CONFIG=1 ++ fi ++fi ++ ++if [ "$PROPERTY" = "n" ]; then ++ if [ "$HAVE_PROPERTY" = 1 ]; then ++ sed -i '/^blacklist_exceptions[[:space:]]*{/,/^}/ s/^[[:space:]]*property[[:space:]]*\"(SCSI_IDENT_|ID_WWN)\"/# property \"(SCSI_IDENT_|ID_WWN)\"/' $TMPFILE ++ CHANGED_CONFIG=1 ++ fi ++elif [ "$PROPERTY" = "y" ]; then ++ if [ -z "$HAVE_PROPERTY" ]; then ++ sed -i '/^blacklist_exceptions[[:space:]]*{/ a\ ++ property "(SCSI_IDENT_|ID_WWN)" ++' $TMPFILE ++ CHANGED_CONFIG=1 ++ elif [ "$HAVE_PROPERTY" = 0 ]; then ++ sed -i '/^blacklist_exceptions[[:space:]]*{/,/^}/ s/^[[:space:]]*#[[:space:]]*property[[:space:]]*\"(SCSI_IDENT_|ID_WWN)\"/ property \"(SCSI_IDENT_|ID_WWN)\"/' $TMPFILE ++ CHANGED_CONFIG=1 ++ fi ++fi ++ ++if [ "$FOREIGN" = "y" ]; then ++ if [ "$HAVE_FOREIGN" = 1 -o "$HAVE_FOREIGN" = 2 ]; then ++ sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*enable_foreign/# enable_foreign/' $TMPFILE ++ CHANGED_CONFIG=1 ++ fi ++elif [ "$FOREIGN" = "n" ]; then ++ if [ -z "$HAVE_FOREIGN" ]; then ++ sed -i '/^defaults[[:space:]]*{/ a\ ++ enable_foreign "^$" ++' $TMPFILE ++ CHANGED_CONFIG=1 ++ elif [ "$HAVE_FOREIGN" = 0 -o "$HAVE_FOREIGN" = 2 ]; then ++ sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*#\?[[:space:]]*enable_foreign.*$/ enable_foreign "^$"/' $TMPFILE ++ CHANGED_CONFIG=1 ++ fi ++fi ++ ++if [ -f "$OUTPUTFILE" ]; then ++ cp $OUTPUTFILE $OUTPUTFILE.old ++ if [ $? != 0 ]; then ++ echo "failed to backup old config file, $OUTPUTFILE not updated" ++ exit 1 ++ fi ++fi ++ ++cp $TMPFILE $OUTPUTFILE ++if [ $? != 0 ]; then ++ echo "failed to copy new config file into place, check $OUTPUTFILE is still OK" ++ exit 1 ++fi ++ ++rm -f $TMPFILE ++ ++if [ "$ENABLE" = 1 ]; then ++ if [ "$HAVE_MODULE" = 0 ]; then ++ modprobe dm_multipath ++ fi ++ if [ "$HAVE_MULTIPATHD" = 0 ]; then ++ systemctl start multipathd.service ++ fi ++elif [ "$ENABLE" = 0 ]; then ++ if [ "$HAVE_MULTIPATHD" = 1 ]; then ++ systemctl stop multipathd.service ++ fi ++elif [ -n "$CHANGED_CONFIG" -a "$HAVE_MULTIPATHD" = 1 ]; then ++ systemctl reload multipathd.service ++fi +diff --git a/multipath/mpathconf.8 b/multipath/mpathconf.8 +new file mode 100644 +index 00000000..83515eb4 +--- /dev/null ++++ b/multipath/mpathconf.8 +@@ -0,0 +1,135 @@ ++.TH MPATHCONF 8 "June 2010" "" "Linux Administrator's Manual" ++.SH NAME ++mpathconf - A tool for configuring device-mapper-multipath ++.SH SYNOPSIS ++.B mpathconf ++.RB [\| commands \|] ++.RB [\| options \|] ++.SH DESCRIPTION ++.B mpathconf ++is a utility that creates or modifies ++.B /etc/multipath.conf. ++It can enable or disable multipathing and configure some common options. ++.B mpathconf ++can also load the ++.B dm_multipath ++module, start and stop the ++.B multipathd ++daemon, and configure the ++.B multipathd ++service to start automatically or not. If ++.B mpathconf ++is called with no commands, it will display the current configuration, but ++will not create of modify ++.B /etc/multipath.conf ++ ++The default options for mpathconf are ++.B --with_module ++The ++.B --with_multipathd ++option is not set by default. Enabling multipathing will load the ++.B dm_multipath ++module but it will not immediately start it. This is so ++that users can manually edit their config file if necessary, before starting ++.B multipathd. ++ ++If ++.B /etc/multipath.conf ++already exists, mpathconf will edit it. If it does not exist, mpathconf will ++create a default file with ++.B user_friendly_names ++set and ++.B find_multipaths ++set to \fByes\fP. To disable these, use the ++.B --user_friendly_names n ++and ++.B --find_multipaths n ++options ++.SH COMMANDS ++.TP ++.B --enable ++Removes any line that blacklists all device nodes from the ++.B /etc/multipath.conf ++blacklist section. Also, creates ++.B /etc/multipath.conf ++if it doesn't exist. ++.TP ++.B --disable ++Adds a line that blacklists all device nodes to the ++.B /etc/multipath.conf ++blacklist section. If no blacklist section exists, it will create one. ++.TP ++.B --allow \fB\fP ++Modifies the \fB/etc/multipath/conf\fP blacklist to blacklist all ++wwids and the blacklist_exceptions to whitelist \fB\fP. \fB\fP ++can be in the form of MAJOR:MINOR, a wwid, or the name of a device-mapper ++device, either a multipath device, or any device on stacked on top of one or ++more multipath devices. This command can be used multiple times to allow ++multiple devices. \fBNOTE:\fP This action will create a configuration file that ++mpathconf will not be able to revert back to its previous state. Because ++of this, \fB--outfile\fP is required when using \fB--allow\fP. ++.TP ++.B --user_friendly_names \fP { \fBy\fP | \fBn\fP } ++If set to \fBy\fP, this adds the line ++.B user_friendly_names yes ++to the ++.B /etc/multipath.conf ++defaults section. If set to \fBn\fP, this removes the line, if present. This ++command can be used along with any other command. ++.TP ++.B --find_multipaths\fP { \fByes\fP | \fBno\fP | \fBstrict\fP | \fBgreedy\fP | \fBsmart\fP } ++If set to \fB\fP, this adds the line ++.B find_multipaths ++to the ++.B /etc/multipath.conf ++defaults section. This command can be used along with any other command. ++\fBy\fP and \fBn\fP can be used instead of \fByes\fP and \fBno\fP. ++.TP ++.B --property_blacklist \fP { \fBy\fP | \fBn\fP } ++If set to \fBy\fP, this adds the line ++.B property "(SCSI_IDENT_|ID_WWN)" ++to the ++.B /etc/multipath.conf ++blacklist_exceptions section. If set to \fBn\fP, this removes the line, if ++present. This command can be used along with any other command. ++.TP ++.B --enable_foreign\fP { \fBy\fP | \fBn\fP } ++If set to \fBn\fP, this adds the line ++.B enable_foreign "^$" ++to the ++.B /etc/multipath.conf ++defaults section. if set to \fBy\fP, this removes the line, if present. This ++command can be used along with any other command. ++.TP ++.B --outfile \fB\fP ++Write the resulting multipath configuration to \fB\fP instead of ++\fB/etc/multipath.conf\fP. ++.SH OPTIONS ++.TP ++.B --with_module\fP { \fBy\fP | \fBn\fP } ++If set to \fBy\fP, this runs ++.B modprobe dm_multipath ++to install the multipath modules. This option only works with the ++.B --enable ++command. This option is set to \fBy\fP by default. ++.TP ++.B --with_multipathd { \fBy\fP | \fBn\fP } ++If set to \fBy\fP, this runs ++.B service multipathd start ++to start the multipathd daemon on \fB--enable\fP, ++.B service multipathd stop ++to stop the multipathd daemon on \fB--disable\fP, and ++.B service multipathd reload ++to reconfigure multipathd on \fB--user_frindly_names\fP and ++\fB--find_multipaths\fP. ++This option is set to \fBn\fP by default. ++.SH FILES ++.BR /etc/multipath.conf ++.SH "SEE ALSO" ++.BR multipath.conf (5), ++.BR modprobe (8), ++.BR multipath (8), ++.BR multipathd (8), ++.BR service (8), ++.SH AUTHOR ++Benjamin Marzinski diff --git a/SOURCES/0007-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch b/SOURCES/0007-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch new file mode 100644 index 0000000..557669b --- /dev/null +++ b/SOURCES/0007-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch @@ -0,0 +1,151 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Fri, 17 Oct 2014 11:20:34 -0500 +Subject: [PATCH] RH: add wwids from kernel cmdline mpath.wwids with -A + +This patch adds another option to multipath, "-A", which reads +/proc/cmdline for mpath.wwid= options, and adds any wwids it finds +to /etc/multipath/wwids. While this isn't usually important during +normal operation, since these wwids should already be added, it can be +helpful during installation, to make sure that multipath can claim +devices as its own, before LVM or something else makes use of them. The +patch also execs "/sbin/multipath -A" before running multipathd in +multipathd.service + +Signed-off-by: Benjamin Marzinski +--- + multipath/main.c | 54 +++++++++++++++++++++++++++++++++-- + multipath/multipath.8 | 7 ++++- + multipathd/multipathd.service | 1 + + 3 files changed, 59 insertions(+), 3 deletions(-) + +diff --git a/multipath/main.c b/multipath/main.c +index ef89c7cf..f618550d 100644 +--- a/multipath/main.c ++++ b/multipath/main.c +@@ -122,7 +122,7 @@ usage (char * progname) + fprintf (stderr, " %s [-v level] [-R retries] -F\n", progname); + fprintf (stderr, " %s [-v level] [-l|-ll] [device]\n", progname); + fprintf (stderr, " %s [-v level] [-a|-w] device\n", progname); +- fprintf (stderr, " %s [-v level] -W\n", progname); ++ fprintf (stderr, " %s [-v level] [-A|-W]\n", progname); + fprintf (stderr, " %s [-v level] [-i] [-c|-C] device\n", progname); + fprintf (stderr, " %s [-v level] [-i] [-u|-U]\n", progname); + fprintf (stderr, " %s [-h|-t|-T]\n", progname); +@@ -136,6 +136,8 @@ usage (char * progname) + " -f flush a multipath device map\n" + " -F flush all multipath device maps\n" + " -a add a device wwid to the wwids file\n" ++ " -A add devices from kernel command line mpath.wwids\n" ++ " parameters to wwids file\n" + " -c check if a device should be a path in a multipath device\n" + " -C check if a multipath device has usable paths\n" + " -q allow queue_if_no_path when multipathd is not running\n" +@@ -450,6 +452,50 @@ static void cleanup_vecs(void) + free_pathvec(vecs.pathvec, FREE_PATHS); + } + ++static int remember_cmdline_wwid(void) ++{ ++ FILE *f = NULL; ++ char buf[LINE_MAX], *next, *ptr; ++ int ret = 0; ++ ++ f = fopen("/proc/cmdline", "re"); ++ if (!f) { ++ condlog(0, "can't open /proc/cmdline : %s", strerror(errno)); ++ return -1; ++ } ++ ++ if (!fgets(buf, sizeof(buf), f)) { ++ if (ferror(f)) ++ condlog(0, "read of /proc/cmdline failed : %s", ++ strerror(errno)); ++ else ++ condlog(0, "couldn't read /proc/cmdline"); ++ fclose(f); ++ return -1; ++ } ++ fclose(f); ++ next = buf; ++ while((ptr = strstr(next, "mpath.wwid="))) { ++ ptr += 11; ++ next = strpbrk(ptr, " \t\n"); ++ if (next) { ++ *next = '\0'; ++ next++; ++ } ++ if (strlen(ptr)) { ++ if (remember_wwid(ptr) != 0) ++ ret = -1; ++ } ++ else { ++ condlog(0, "empty mpath.wwid kernel command line option"); ++ ret = -1; ++ } ++ if (!next) ++ break; ++ } ++ return ret; ++} ++ + static int + configure (struct config *conf, enum mpath_cmds cmd, + enum devtypes dev_type, char *devpath) +@@ -823,7 +869,7 @@ main (int argc, char *argv[]) + conf = get_multipath_config(); + conf->retrigger_tries = 0; + conf->force_sync = 1; +- while ((arg = getopt(argc, argv, ":adDcChl::eFfM:v:p:b:BrR:itTquUwW")) != EOF ) { ++ while ((arg = getopt(argc, argv, ":aAdDcChl::eFfM:v:p:b:BrR:itTquUwW")) != EOF ) { + switch(arg) { + case 1: printf("optarg : %s\n",optarg); + break; +@@ -900,6 +946,10 @@ main (int argc, char *argv[]) + case 'T': + cmd = CMD_DUMP_CONFIG; + break; ++ case 'A': ++ if (remember_cmdline_wwid() != 0) ++ exit(RTVL_FAIL); ++ exit(RTVL_OK); + case 'h': + usage(argv[0]); + exit(RTVL_OK); +diff --git a/multipath/multipath.8 b/multipath/multipath.8 +index 5b29a5d9..0478f4e7 100644 +--- a/multipath/multipath.8 ++++ b/multipath/multipath.8 +@@ -63,7 +63,7 @@ multipath \- Device mapper target autoconfig. + .B multipath + .RB [\| \-v\ \c + .IR level \|] +-.B -W ++.RB [\| \-A | \-W \|] + . + .LP + .B multipath +@@ -145,6 +145,11 @@ device mapper, path checkers ...). + Add the WWID for the specified device to the WWIDs file. + . + .TP ++.B \-A ++Add the WWIDs from any kernel command line \fImpath.wwid\fR parameters to the ++WWIDs file. ++. ++.TP + .B \-w + Remove the WWID for the specified device from the WWIDs file. + . +diff --git a/multipathd/multipathd.service b/multipathd/multipathd.service +index af592057..bc8fa07a 100644 +--- a/multipathd/multipathd.service ++++ b/multipathd/multipathd.service +@@ -15,6 +15,7 @@ Type=notify + NotifyAccess=main + LimitCORE=infinity + ExecStartPre=-/sbin/modprobe -a scsi_dh_alua scsi_dh_emc scsi_dh_rdac dm-multipath ++ExecStartPre=-/sbin/multipath -A + ExecStart=/sbin/multipathd -d -s + ExecReload=/sbin/multipathd reconfigure + TasksMax=infinity diff --git a/SOURCES/0008-RH-reset-default-find_mutipaths-value-to-off.patch b/SOURCES/0008-RH-reset-default-find_mutipaths-value-to-off.patch new file mode 100644 index 0000000..d5b5601 --- /dev/null +++ b/SOURCES/0008-RH-reset-default-find_mutipaths-value-to-off.patch @@ -0,0 +1,26 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Thu, 7 Jun 2018 17:43:52 -0500 +Subject: [PATCH] RH: reset default find_mutipaths value to off + +Upstream has changed to default find_multipaths to "strict". For now +Redhat will retain the previous default of "off". + +Signed-off-by: Benjamin Marzinski +--- + libmultipath/defaults.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/libmultipath/defaults.h b/libmultipath/defaults.h +index c27946c7..e0dd32ad 100644 +--- a/libmultipath/defaults.h ++++ b/libmultipath/defaults.h +@@ -23,7 +23,7 @@ + #define DEFAULT_NO_PATH_RETRY NO_PATH_RETRY_UNDEF + #define DEFAULT_VERBOSITY 2 + #define DEFAULT_REASSIGN_MAPS 0 +-#define DEFAULT_FIND_MULTIPATHS FIND_MULTIPATHS_STRICT ++#define DEFAULT_FIND_MULTIPATHS FIND_MULTIPATHS_OFF + #define DEFAULT_FAST_IO_FAIL 5 + #define DEFAULT_DEV_LOSS_TMO 600 + #define DEFAULT_RETAIN_HWHANDLER RETAIN_HWHANDLER_ON diff --git a/SOURCES/0009-RH-attempt-to-get-ANA-info-via-sysfs-first.patch b/SOURCES/0009-RH-attempt-to-get-ANA-info-via-sysfs-first.patch new file mode 100644 index 0000000..06233ff --- /dev/null +++ b/SOURCES/0009-RH-attempt-to-get-ANA-info-via-sysfs-first.patch @@ -0,0 +1,84 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Thu, 11 Apr 2019 13:25:42 -0500 +Subject: [PATCH] RH: attempt to get ANA info via sysfs first + +When the ANA prioritizer is run, first see if the "ana_state" sysfs file +exists, and if it does, try to read the state from there. If that fails, +fallback to using an ioctl. + +Signed-off-by: Benjamin Marzinski +--- + libmultipath/prioritizers/ana.c | 31 +++++++++++++++++++++++++++++-- + 1 file changed, 29 insertions(+), 2 deletions(-) + +diff --git a/libmultipath/prioritizers/ana.c b/libmultipath/prioritizers/ana.c +index b5c7873d..e139360c 100644 +--- a/libmultipath/prioritizers/ana.c ++++ b/libmultipath/prioritizers/ana.c +@@ -24,6 +24,7 @@ + #include "prio.h" + #include "util.h" + #include "structs.h" ++#include "sysfs.h" + + enum { + ANA_ERR_GETCTRL_FAILED = 1, +@@ -36,6 +37,7 @@ enum { + ANA_ERR_GETNS_FAILED, + ANA_ERR_NO_MEMORY, + ANA_ERR_NO_INFORMATION, ++ ANA_ERR_INVALID_STATE, + }; + + static const char *ana_errmsg[] = { +@@ -49,6 +51,7 @@ static const char *ana_errmsg[] = { + [ANA_ERR_GETNS_FAILED] = "couldn't get namespace info", + [ANA_ERR_NO_MEMORY] = "out of memory", + [ANA_ERR_NO_INFORMATION] = "invalid fd", ++ [ANA_ERR_INVALID_STATE] = "invalid state", + }; + + static const char *anas_string[] = { +@@ -107,6 +110,27 @@ static int get_ana_state(__u32 nsid, __u32 anagrpid, void *ana_log, + return -ANA_ERR_GETANAS_NOTFOUND; + } + ++static int get_ana_info_sysfs(struct path *pp) ++{ ++ char state[32]; ++ ++ if (!pp->udev || sysfs_attr_get_value(pp->udev, "ana_state", state, ++ sizeof(state)) <= 0) ++ return -ANA_ERR_NO_INFORMATION; ++ ++ if (strcmp(state, "optimized") == 0) ++ return NVME_ANA_OPTIMIZED; ++ if (strcmp(state, "non-optimized") == 0) ++ return NVME_ANA_NONOPTIMIZED; ++ if (strcmp(state, "inaccessible") == 0) ++ return NVME_ANA_INACCESSIBLE; ++ if (strcmp(state, "persistent-loss") == 0) ++ return NVME_ANA_PERSISTENT_LOSS; ++ if (strcmp(state, "change") == 0) ++ return NVME_ANA_CHANGE; ++ return -ANA_ERR_INVALID_STATE; ++} ++ + static int get_ana_info(struct path * pp) + { + int rc; +@@ -210,8 +234,11 @@ int getprio(struct path *pp, __attribute__((unused)) char *args, + + if (pp->fd < 0) + rc = -ANA_ERR_NO_INFORMATION; +- else +- rc = get_ana_info(pp); ++ else { ++ rc = get_ana_info_sysfs(pp); ++ if (rc < 0) ++ rc = get_ana_info(pp); ++ } + + switch (rc) { + case NVME_ANA_OPTIMIZED: diff --git a/SOURCES/0010-RH-make-parse_vpd_pg83-match-scsi_id-output.patch b/SOURCES/0010-RH-make-parse_vpd_pg83-match-scsi_id-output.patch new file mode 100644 index 0000000..0ab20c5 --- /dev/null +++ b/SOURCES/0010-RH-make-parse_vpd_pg83-match-scsi_id-output.patch @@ -0,0 +1,51 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Thu, 25 Mar 2021 13:05:10 -0500 +Subject: [PATCH] RH: make parse_vpd_pg83 match scsi_id output + +Red Hat sets ID_SERIAL based on the result of scsi_id, instead of using +the result of sg_inq and 55-scsi-sg3_id.rules. Make parse_vpd_pg83 match +that. + +Signed-off-by: Benjamin Marzinski +--- + libmultipath/discovery.c | 18 ++---------------- + 1 file changed, 2 insertions(+), 16 deletions(-) + +diff --git a/libmultipath/discovery.c b/libmultipath/discovery.c +index ec99a7aa..2704270e 100644 +--- a/libmultipath/discovery.c ++++ b/libmultipath/discovery.c +@@ -1135,12 +1135,9 @@ parse_vpd_pg83(const unsigned char *in, size_t in_len, + naa_prio = 7; + break; + case 2: +- /* IEEE Extended: Prio 6 */ +- naa_prio = 6; +- break; + case 3: +- /* IEEE Locally assigned: Prio 1 */ +- naa_prio = 1; ++ /* IEEE Extended or Locally assigned: Prio 6 */ ++ naa_prio = 6; + break; + default: + /* Default: no priority */ +@@ -1159,17 +1156,6 @@ parse_vpd_pg83(const unsigned char *in, size_t in_len, + vpd = d; + } + break; +- case 0x8: +- /* SCSI Name: Prio 3 */ +- if (memcmp(d + 4, "eui.", 4) && +- memcmp(d + 4, "naa.", 4) && +- memcmp(d + 4, "iqn.", 4)) +- break; +- if (prio < 3) { +- prio = 3; +- vpd = d; +- } +- break; + case 0x1: + /* T-10 Vendor ID: Prio 2 */ + if (prio < 2) { diff --git a/SOURCES/0011-multipathd-don-t-fail-to-remove-path-once-the-map-is.patch b/SOURCES/0011-multipathd-don-t-fail-to-remove-path-once-the-map-is.patch new file mode 100644 index 0000000..24c9043 --- /dev/null +++ b/SOURCES/0011-multipathd-don-t-fail-to-remove-path-once-the-map-is.patch @@ -0,0 +1,69 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Tue, 11 May 2021 11:15:47 -0500 +Subject: [PATCH] multipathd: don't fail to remove path once the map is removed + +In ev_remove_path(), if update_mpp_paths() fails, we delete the entire +map. However, since update_mpp_paths() happens before we call +set_path_removed(), pp->initialized isn't set to INIT_REMOVED, so +remove_map_and_stop_waiter() doesn't remove the path when in removes the +map. But with the map removed, there's nothing to keep us from removing +the path. + +Call set_path_removed() before update_mpp_paths() to avoid the odd case +of ev_remove_path() removing the map but not the path. + +Signed-off-by: Benjamin Marzinski +--- + libmultipath/structs_vec.c | 4 ++-- + multipathd/main.c | 13 ++++++++----- + 2 files changed, 10 insertions(+), 7 deletions(-) + +diff --git a/libmultipath/structs_vec.c b/libmultipath/structs_vec.c +index d242c06b..75390198 100644 +--- a/libmultipath/structs_vec.c ++++ b/libmultipath/structs_vec.c +@@ -45,8 +45,8 @@ int update_mpp_paths(struct multipath *mpp, vector pathvec) + + /* + * Avoid adding removed paths to the map again +- * when we reload it. Such paths may exist if +- * domap fails in ev_remove_path(). ++ * when we reload it. Such paths may exist in ++ * ev_remove_paths() or if it returns failure. + */ + pp1 = find_path_by_devt(pathvec, pp->dev_t); + if (pp1 && pp->initialized != INIT_REMOVED && +diff --git a/multipathd/main.c b/multipathd/main.c +index 102946bf..449ce384 100644 +--- a/multipathd/main.c ++++ b/multipathd/main.c +@@ -1199,6 +1199,13 @@ ev_remove_path (struct path *pp, struct vectors * vecs, int need_do_map) + * avoid referring to the map of an orphaned path + */ + if ((mpp = pp->mpp)) { ++ /* ++ * Mark the path as removed. In case of success, we ++ * will delete it for good. Otherwise, it will be deleted ++ * later, unless all attempts to reload this map fail. ++ */ ++ set_path_removed(pp); ++ + /* + * transform the mp->pg vector of vectors of paths + * into a mp->params string to feed the device-mapper +@@ -1210,13 +1217,9 @@ ev_remove_path (struct path *pp, struct vectors * vecs, int need_do_map) + } + + /* +- * Mark the path as removed. In case of success, we +- * will delete it for good. Otherwise, it will be deleted +- * later, unless all attempts to reload this map fail. +- * Note: we have to explicitly remove pp from mpp->paths, ++ * we have to explicitly remove pp from mpp->paths, + * update_mpp_paths() doesn't do that. + */ +- set_path_removed(pp); + i = find_slot(mpp->paths, pp); + if (i != -1) + vector_del_slot(mpp->paths, i); diff --git a/SOURCES/0012-multipathd-remove-duplicate-orphan_paths-in-flush_ma.patch b/SOURCES/0012-multipathd-remove-duplicate-orphan_paths-in-flush_ma.patch new file mode 100644 index 0000000..38b1d2b --- /dev/null +++ b/SOURCES/0012-multipathd-remove-duplicate-orphan_paths-in-flush_ma.patch @@ -0,0 +1,26 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Tue, 11 May 2021 11:55:14 -0500 +Subject: [PATCH] multipathd: remove duplicate orphan_paths in flush_map + +remove_map_and_stop_waiter() already calls orphan_paths() so flush_map() +doesn't need to call orphan_paths() before calling +remove_map_and_stop_waiter(). + +Signed-off-by: Benjamin Marzinski +--- + multipathd/main.c | 1 - + 1 file changed, 1 deletion(-) + +diff --git a/multipathd/main.c b/multipathd/main.c +index 449ce384..6090434c 100644 +--- a/multipathd/main.c ++++ b/multipathd/main.c +@@ -660,7 +660,6 @@ flush_map(struct multipath * mpp, struct vectors * vecs, int nopaths) + else + condlog(2, "%s: map flushed", mpp->alias); + +- orphan_paths(vecs->pathvec, mpp, "map flushed"); + remove_map_and_stop_waiter(mpp, vecs); + + return 0; diff --git a/SOURCES/0013-multipathd-fix-ev_remove_path-return-code-handling.patch b/SOURCES/0013-multipathd-fix-ev_remove_path-return-code-handling.patch new file mode 100644 index 0000000..c9e5333 --- /dev/null +++ b/SOURCES/0013-multipathd-fix-ev_remove_path-return-code-handling.patch @@ -0,0 +1,225 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Tue, 11 May 2021 13:58:57 -0500 +Subject: [PATCH] multipathd: fix ev_remove_path return code handling + +When ev_remove_path() returned success, callers assumed that the path +(and possibly the map) had been removed. When ev_remove_path() returned +failure, callers assumed that the path had not been removed. However, +the path could be removed on both success or failure. This could cause +callers to dereference the path after it was removed. + +To deal with this, make ev_remove_path() return a different symbolic +value for each outcome, and make the callers react appropriately for +the different values. Found by coverity. + +Signed-off-by: Benjamin Marzinski +--- + multipathd/cli_handlers.c | 24 +++++++++++++++++++++-- + multipathd/main.c | 41 ++++++++++++++++++++------------------- + multipathd/main.h | 14 +++++++++++++ + 3 files changed, 57 insertions(+), 22 deletions(-) + +diff --git a/multipathd/cli_handlers.c b/multipathd/cli_handlers.c +index 1de6ad8e..6765fcf0 100644 +--- a/multipathd/cli_handlers.c ++++ b/multipathd/cli_handlers.c +@@ -752,7 +752,8 @@ cli_add_path (void * v, char ** reply, int * len, void * data) + /* Have the checker reinstate this path asap */ + pp->tick = 1; + return 0; +- } else if (!ev_remove_path(pp, vecs, true)) ++ } else if (ev_remove_path(pp, vecs, true) & ++ REMOVE_PATH_SUCCESS) + /* Path removed in ev_remove_path() */ + pp = NULL; + else { +@@ -813,6 +814,7 @@ cli_del_path (void * v, char ** reply, int * len, void * data) + struct vectors * vecs = (struct vectors *)data; + char * param = get_keyparam(v, PATH); + struct path *pp; ++ int ret; + + param = convert_dev(param, 1); + condlog(2, "%s: remove path (operator)", param); +@@ -821,7 +823,25 @@ cli_del_path (void * v, char ** reply, int * len, void * data) + condlog(0, "%s: path already removed", param); + return 1; + } +- return ev_remove_path(pp, vecs, 1); ++ ret = ev_remove_path(pp, vecs, 1); ++ if (ret == REMOVE_PATH_DELAY) { ++ *reply = strdup("delayed\n"); ++ if (*reply) ++ *len = strlen(*reply) + 1; ++ else { ++ *len = 0; ++ ret = REMOVE_PATH_FAILURE; ++ } ++ } else if (ret == REMOVE_PATH_MAP_ERROR) { ++ *reply = strdup("map reload error. removed\n"); ++ if (*reply) ++ *len = strlen(*reply) + 1; ++ else { ++ *len = 0; ++ ret = REMOVE_PATH_FAILURE; ++ } ++ } ++ return (ret == REMOVE_PATH_FAILURE); + } + + int +diff --git a/multipathd/main.c b/multipathd/main.c +index 6090434c..8e2beddd 100644 +--- a/multipathd/main.c ++++ b/multipathd/main.c +@@ -838,7 +838,7 @@ handle_path_wwid_change(struct path *pp, struct vectors *vecs) + return; + + udd = udev_device_ref(pp->udev); +- if (ev_remove_path(pp, vecs, 1) != 0 && pp->mpp) { ++ if (!(ev_remove_path(pp, vecs, 1) & REMOVE_PATH_SUCCESS) && pp->mpp) { + pp->dmstate = PSTATE_FAILED; + dm_fail_path(pp->mpp->alias, pp->dev_t); + } +@@ -948,8 +948,8 @@ uev_add_path (struct uevent *uev, struct vectors * vecs, int need_do_map) + * Make another attempt to remove the path + */ + pp->mpp = prev_mpp; +- ret = ev_remove_path(pp, vecs, true); +- if (ret != 0) { ++ if (!(ev_remove_path(pp, vecs, true) & ++ REMOVE_PATH_SUCCESS)) { + /* + * Failure in ev_remove_path will keep + * path in pathvec in INIT_REMOVED state +@@ -960,6 +960,7 @@ uev_add_path (struct uevent *uev, struct vectors * vecs, int need_do_map) + dm_fail_path(pp->mpp->alias, pp->dev_t); + condlog(1, "%s: failed to re-add path still mapped in %s", + pp->dev, pp->mpp->alias); ++ ret = 1; + } else if (r == PATHINFO_OK) + /* + * Path successfully freed, move on to +@@ -1167,7 +1168,6 @@ static int + uev_remove_path (struct uevent *uev, struct vectors * vecs, int need_do_map) + { + struct path *pp; +- int ret; + + condlog(3, "%s: remove path (uevent)", uev->kernel); + delete_foreign(uev->udev); +@@ -1177,21 +1177,18 @@ uev_remove_path (struct uevent *uev, struct vectors * vecs, int need_do_map) + pthread_testcancel(); + pp = find_path_by_dev(vecs->pathvec, uev->kernel); + if (pp) +- ret = ev_remove_path(pp, vecs, need_do_map); ++ ev_remove_path(pp, vecs, need_do_map); + lock_cleanup_pop(vecs->lock); +- if (!pp) { +- /* Not an error; path might have been purged earlier */ ++ if (!pp) /* Not an error; path might have been purged earlier */ + condlog(0, "%s: path already removed", uev->kernel); +- return 0; +- } +- return ret; ++ return 0; + } + + int + ev_remove_path (struct path *pp, struct vectors * vecs, int need_do_map) + { + struct multipath * mpp; +- int i, retval = 0; ++ int i, retval = REMOVE_PATH_SUCCESS; + char params[PARAMS_SIZE] = {0}; + + /* +@@ -1245,7 +1242,6 @@ ev_remove_path (struct path *pp, struct vectors * vecs, int need_do_map) + condlog(2, "%s: removed map after" + " removing all paths", + alias); +- retval = 0; + /* flush_map() has freed the path */ + goto out; + } +@@ -1262,11 +1258,14 @@ ev_remove_path (struct path *pp, struct vectors * vecs, int need_do_map) + + if (mpp->wait_for_udev) { + mpp->wait_for_udev = 2; ++ retval = REMOVE_PATH_DELAY; + goto out; + } + +- if (!need_do_map) ++ if (!need_do_map) { ++ retval = REMOVE_PATH_DELAY; + goto out; ++ } + /* + * reload the map + */ +@@ -1275,7 +1274,7 @@ ev_remove_path (struct path *pp, struct vectors * vecs, int need_do_map) + condlog(0, "%s: failed in domap for " + "removal of path %s", + mpp->alias, pp->dev); +- retval = 1; ++ retval = REMOVE_PATH_FAILURE; + } else { + /* + * update our state from kernel +@@ -1283,12 +1282,12 @@ ev_remove_path (struct path *pp, struct vectors * vecs, int need_do_map) + char devt[BLK_DEV_SIZE]; + + strlcpy(devt, pp->dev_t, sizeof(devt)); ++ ++ /* setup_multipath will free the path ++ * regardless of whether it succeeds or ++ * fails */ + if (setup_multipath(vecs, mpp)) +- return 1; +- /* +- * Successful map reload without this path: +- * sync_map_state() will free it. +- */ ++ return REMOVE_PATH_MAP_ERROR; + sync_map_state(mpp); + + condlog(2, "%s: path removed from map %s", +@@ -1304,8 +1303,10 @@ out: + return retval; + + fail: ++ condlog(0, "%s: error removing path. removing map %s", pp->dev, ++ mpp->alias); + remove_map_and_stop_waiter(mpp, vecs); +- return 1; ++ return REMOVE_PATH_MAP_ERROR; + } + + static int +diff --git a/multipathd/main.h b/multipathd/main.h +index ddd953f9..bc1f938f 100644 +--- a/multipathd/main.h ++++ b/multipathd/main.h +@@ -13,6 +13,20 @@ enum daemon_status { + DAEMON_STATUS_SIZE, + }; + ++enum remove_path_result { ++ REMOVE_PATH_FAILURE = 0x0, /* path could not be removed. It is still ++ * part of the kernel map, but its state ++ * is set to INIT_REMOVED, and it will be ++ * removed at the next possible occassion */ ++ REMOVE_PATH_SUCCESS = 0x1, /* path was removed */ ++ REMOVE_PATH_DELAY = 0x2, /* path is set to be removed later. it ++ * currently still exists and is part of the ++ * kernel map */ ++ REMOVE_PATH_MAP_ERROR = 0x5, /* map was removed because of error. value ++ * includes REMOVE_PATH_SUCCESS bit ++ * because the path was also removed */ ++}; ++ + struct prout_param_descriptor; + struct prin_resp; + diff --git a/SOURCES/0014-multipath-free-vectors-in-configure.patch b/SOURCES/0014-multipath-free-vectors-in-configure.patch new file mode 100644 index 0000000..eeb09d7 --- /dev/null +++ b/SOURCES/0014-multipath-free-vectors-in-configure.patch @@ -0,0 +1,46 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Tue, 11 May 2021 15:25:21 -0500 +Subject: [PATCH] multipath: free vectors in configure + +configure() can retry multiple times, each time reallocing a maps and +paths vector, and leaking the previous ones. Fix this by always freeing +the vectors before configure() exits. Found by coverity. + +Signed-off-by: Benjamin Marzinski +--- + multipath/main.c | 7 ++++++- + 1 file changed, 6 insertions(+), 1 deletion(-) + +diff --git a/multipath/main.c b/multipath/main.c +index f618550d..9fe53dcd 100644 +--- a/multipath/main.c ++++ b/multipath/main.c +@@ -512,7 +512,6 @@ configure (struct config *conf, enum mpath_cmds cmd, + */ + curmp = vector_alloc(); + pathvec = vector_alloc(); +- atexit(cleanup_vecs); + + if (!curmp || !pathvec) { + condlog(0, "can not allocate memory"); +@@ -624,6 +623,11 @@ out: + if (refwwid) + FREE(refwwid); + ++ free_multipathvec(curmp, KEEP_PATHS); ++ vecs.mpvec = NULL; ++ free_pathvec(pathvec, FREE_PATHS); ++ vecs.pathvec = NULL; ++ + return r; + } + +@@ -869,6 +873,7 @@ main (int argc, char *argv[]) + conf = get_multipath_config(); + conf->retrigger_tries = 0; + conf->force_sync = 1; ++ atexit(cleanup_vecs); + while ((arg = getopt(argc, argv, ":aAdDcChl::eFfM:v:p:b:BrR:itTquUwW")) != EOF ) { + switch(arg) { + case 1: printf("optarg : %s\n",optarg); diff --git a/SOURCES/0015-kpartx-Don-t-leak-memory-when-getblock-returns-NULL.patch b/SOURCES/0015-kpartx-Don-t-leak-memory-when-getblock-returns-NULL.patch new file mode 100644 index 0000000..75004cc --- /dev/null +++ b/SOURCES/0015-kpartx-Don-t-leak-memory-when-getblock-returns-NULL.patch @@ -0,0 +1,27 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Tue, 11 May 2021 16:03:13 -0500 +Subject: [PATCH] kpartx: Don't leak memory when getblock returns NULL + +If a new block was allocated, but couldn't be filled, getblock will +discard it. When it does so, it needs to free the block to avoid leaking +memory. Found by coverity. + +Signed-off-by: Benjamin Marzinski +--- + kpartx/kpartx.c | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/kpartx/kpartx.c b/kpartx/kpartx.c +index 8ff116b8..7bc64543 100644 +--- a/kpartx/kpartx.c ++++ b/kpartx/kpartx.c +@@ -766,6 +766,8 @@ getblock (int fd, unsigned int blknr) { + if (read(fd, bp->block, secsz) != secsz) { + fprintf(stderr, "read error, sector %d\n", secnr); + blockhead = bp->next; ++ free(bp->block); ++ free(bp); + return NULL; + } + diff --git a/SOURCES/0016-multipathd-don-t-rescan_path-on-wwid-change-in-uev_u.patch b/SOURCES/0016-multipathd-don-t-rescan_path-on-wwid-change-in-uev_u.patch new file mode 100644 index 0000000..6c68ea3 --- /dev/null +++ b/SOURCES/0016-multipathd-don-t-rescan_path-on-wwid-change-in-uev_u.patch @@ -0,0 +1,27 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Fri, 14 May 2021 13:45:28 -0500 +Subject: [PATCH] multipathd: don't rescan_path on wwid change in + uev_update_path + +If get_uid() is returning a different wwid in uev_update_path(), then +the uid_attribute must have already gotten updated, which was the +purpose behind calling rescan_path() in the first place. + +Signed-off-by: Benjamin Marzinski +--- + multipathd/main.c | 1 - + 1 file changed, 1 deletion(-) + +diff --git a/multipathd/main.c b/multipathd/main.c +index 8e2beddd..2750f5e9 100644 +--- a/multipathd/main.c ++++ b/multipathd/main.c +@@ -1359,7 +1359,6 @@ uev_update_path (struct uevent *uev, struct vectors * vecs) + condlog(0, "%s: path wwid changed from '%s' to '%s'", + uev->kernel, wwid, pp->wwid); + ev_remove_path(pp, vecs, 1); +- rescan_path(uev->udev); + needs_reinit = 1; + goto out; + } else { diff --git a/SOURCES/0017-RH-mpathconf-correctly-handle-spaces-after-option-na.patch b/SOURCES/0017-RH-mpathconf-correctly-handle-spaces-after-option-na.patch new file mode 100644 index 0000000..ca81cc5 --- /dev/null +++ b/SOURCES/0017-RH-mpathconf-correctly-handle-spaces-after-option-na.patch @@ -0,0 +1,204 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Fri, 9 Jul 2021 14:30:10 -0500 +Subject: [PATCH] RH: mpathconf: correctly handle spaces after option names + +mpathconf was either accepting any number of spaces, including zero, +after option names, or it was only accepting one space. It should +accept one or more spaces. Also, fix enable_foreign handling. It was +still working like it did in RHEL8, where the default was to enable +all foreign devices. + +Signed-off-by: Benjamin Marzinski +--- + multipath/mpathconf | 62 +++++++++++++++++++++++++-------------------- + 1 file changed, 34 insertions(+), 28 deletions(-) + +diff --git a/multipath/mpathconf b/multipath/mpathconf +index 2f4f3eaf..039b3e47 100644 +--- a/multipath/mpathconf ++++ b/multipath/mpathconf +@@ -240,7 +240,7 @@ function validate_args + echo "--enable_foreign must be either 'y' or 'n'" + exit 1 + fi +- if [ -z "$ENABLE" -a -z "$FIND" -a -z "$FRIENDLY" -a -z "$PROPERTY" ]; then ++ if [ -z "$ENABLE" -a -z "$FIND" -a -z "$FRIENDLY" -a -z "$PROPERTY" -a -z "$FOREIGN" ]; then + SHOW_STATUS=1 + fi + if [ -n "$MODULE" ] && [ "$MODULE" != "y" -a "$MODULE" != "n" ]; then +@@ -315,46 +315,50 @@ if [ "$MULTIPATHD" = "y" ]; then + fi + + if [ "$HAVE_BLACKLIST" = "1" ]; then +- if sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*devnode \"\.\?\*\"" ; then ++ if sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*devnode[[:space:]][[:space:]]*\"\.\?\*\"" ; then + HAVE_DISABLE=1 +- elif sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*#[[:space:]]*devnode \"\.\?\*\"" ; then ++ elif sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*#[[:space:]]*devnode[[:space:]][[:space:]]*\"\.\?\*\"" ; then + HAVE_DISABLE=0 + fi + fi + + if [ "$HAVE_BLACKLIST" = "1" ]; then +- if sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*wwid \"\.\?\*\"" ; then ++ if sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*wwid[[:space:]][[:space:]]*\"\.\?\*\"" ; then + HAVE_WWID_DISABLE=1 +- elif sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*#[[:space:]]*wwid \"\.\?\*\"" ; then ++ elif sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*#[[:space:]]*wwid[[:space:]][[:space:]]*\"\.\?\*\"" ; then + HAVE_WWID_DISABLE=0 + fi + fi + + if [ "$HAVE_DEFAULTS" = "1" ]; then +- HAVE_FIND=`sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | sed -n 's/^[[:blank:]]*find_multipaths[[:blank:]]*\([^[:blank:]]*\).*$/\1/p' | sed -n 1p` ++ HAVE_FIND=`sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | sed -n 's/^[[:blank:]]*find_multipaths[[:blank:]][[:blank:]]*\([^[:blank:]]*\).*$/\1/p' | sed -n 1p` + if [ "$HAVE_FIND" = "1" ]; then + HAVE_FIND="yes" + elif [ "$HAVE_FIND" = "0" ]; then + HAVE_FIND="no" + fi +- if sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*user_friendly_names[[:space:]]*\(yes\|1\)" ; then ++ if sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*user_friendly_names[[:space:]][[:space:]]*\(yes\|1\)" ; then + HAVE_FRIENDLY=1 +- elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*user_friendly_names[[:space:]]*\(no\|0\)" ; then ++ elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*user_friendly_names[[:space:]][[:space:]]*\(no\|0\)" ; then + HAVE_FRIENDLY=0 + fi + if sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*#[[:space:]]*enable_foreign" ; then + HAVE_FOREIGN=0 +- elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*enable_foreign[[:space:]]*\"\^\$\"" ; then ++ elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*enable_foreign[[:space:]][[:space:]]*\"\.\*\"" ; then + HAVE_FOREIGN=1 +- elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*enable_foreign" ; then ++ elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*enable_foreign[[:space:]][[:space:]]*\"\^\$\"" ; then ++ HAVE_FOREIGN=2 ++ elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*enable_foreign[[:space:]][[:space:]]*\"NONE\"" ; then + HAVE_FOREIGN=2 ++ elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*enable_foreign" ; then ++ HAVE_FOREIGN=3 + fi + fi + + if [ "$HAVE_EXCEPTIONS" = "1" ]; then +- if sed -n '/^blacklist_exceptions[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*property[[:space:]]*\"(SCSI_IDENT_|ID_WWN)\"" ; then ++ if sed -n '/^blacklist_exceptions[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*property[[:space:]][[:space:]]*\"(SCSI_IDENT_|ID_WWN)\"" ; then + HAVE_PROPERTY=1 +- elif sed -n '/^blacklist_exceptions[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*#[[:space:]]*property[[:space:]]*\"(SCSI_IDENT_|ID_WWN)\"" ; then ++ elif sed -n '/^blacklist_exceptions[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*#[[:space:]]*property[[:space:]][[:space:]]*\"(SCSI_IDENT_|ID_WWN)\"" ; then + HAVE_PROPERTY=0 + fi + fi +@@ -381,8 +385,10 @@ if [ -n "$SHOW_STATUS" ]; then + echo "default property blacklist is enabled" + fi + if [ -z "$HAVE_FOREIGN" -o "$HAVE_FOREIGN" = 0 ]; then +- echo "enable_foreign is not set (all foreign multipath devices will be shown)" ++ echo "enable_foreign is not set (no foreign multipath devices will be shown)" + elif [ "$HAVE_FOREIGN" = 1 ]; then ++ echo "enable_foreign is set (all foreign multipath devices will be shown)" ++ elif [ "$HAVE_FOREIGN" = 2 ]; then + echo "enable_foreign is set (no foreign multipath devices will be shown)" + else + echo "enable_foreign is set (foreign multipath devices may not be shown)" +@@ -427,14 +433,14 @@ fi + + if [ "$ENABLE" = 2 ]; then + if [ "$HAVE_DISABLE" = 1 ]; then +- sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*devnode \"\.\?\*\"/# devnode ".*"/' $TMPFILE ++ sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*devnode[[:space:]][[:space:]]*\"\.\?\*\"/# devnode ".*"/' $TMPFILE + fi + if [ -z "$HAVE_WWID_DISABLE" ]; then + sed -i '/^blacklist[[:space:]]*{/ a\ + wwid ".*" + ' $TMPFILE + elif [ "$HAVE_WWID_DISABLE" = 0 ]; then +- sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*#[[:space:]]*wwid \"\.\?\*\"/ wwid ".*"/' $TMPFILE ++ sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*#[[:space:]]*wwid[[:space:]][[:space:]]*\"\.\?\*\"/ wwid ".*"/' $TMPFILE + fi + if [ "$HAVE_EXCEPTIONS" = 1 ]; then + sed -i '/^blacklist_exceptions[[:space:]]*{/,/^}/ {/^[[:space:]]*wwid/ d}' $TMPFILE +@@ -448,7 +454,7 @@ _EOF_ + add_blacklist_exceptions + elif [ "$ENABLE" = 1 ]; then + if [ "$HAVE_DISABLE" = 1 ]; then +- sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*devnode \"\.\?\*\"/# devnode ".*"/' $TMPFILE ++ sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*devnode[[:space:]][[:space:]]*\"\.\?\*\"/# devnode ".*"/' $TMPFILE + fi + elif [ "$ENABLE" = 0 ]; then + if [ -z "$HAVE_DISABLE" ]; then +@@ -456,7 +462,7 @@ elif [ "$ENABLE" = 0 ]; then + devnode ".*" + ' $TMPFILE + elif [ "$HAVE_DISABLE" = 0 ]; then +- sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*#[[:space:]]*devnode \"\.\?\*\"/ devnode ".*"/' $TMPFILE ++ sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*#[[:space:]]*devnode[[:space:]][[:space:]]*\"\.\?\*\"/ devnode ".*"/' $TMPFILE + fi + fi + +@@ -467,14 +473,14 @@ if [ -n "$FIND" ]; then + ' $TMPFILE + CHANGED_CONFIG=1 + elif [ "$FIND" != "$HAVE_FIND" ]; then +- sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:blank:]]*find_multipaths[[:blank:]]*[^[:blank:]]*/ find_multipaths '"$FIND"'/' $TMPFILE ++ sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:blank:]]*find_multipaths[[:blank:]][[:blank:]]*[^[:blank:]]*/ find_multipaths '"$FIND"'/' $TMPFILE + CHANGED_CONFIG=1 + fi + fi + + if [ "$FRIENDLY" = "n" ]; then + if [ "$HAVE_FRIENDLY" = 1 ]; then +- sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*user_friendly_names[[:space:]]*\(yes\|1\)/ user_friendly_names no/' $TMPFILE ++ sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*user_friendly_names[[:space:]][[:space:]]*\(yes\|1\)/ user_friendly_names no/' $TMPFILE + CHANGED_CONFIG=1 + fi + elif [ "$FRIENDLY" = "y" ]; then +@@ -484,14 +490,14 @@ elif [ "$FRIENDLY" = "y" ]; then + ' $TMPFILE + CHANGED_CONFIG=1 + elif [ "$HAVE_FRIENDLY" = 0 ]; then +- sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*user_friendly_names[[:space:]]*\(no\|0\)/ user_friendly_names yes/' $TMPFILE ++ sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*user_friendly_names[[:space:]][[:space:]]*\(no\|0\)/ user_friendly_names yes/' $TMPFILE + CHANGED_CONFIG=1 + fi + fi + + if [ "$PROPERTY" = "n" ]; then + if [ "$HAVE_PROPERTY" = 1 ]; then +- sed -i '/^blacklist_exceptions[[:space:]]*{/,/^}/ s/^[[:space:]]*property[[:space:]]*\"(SCSI_IDENT_|ID_WWN)\"/# property \"(SCSI_IDENT_|ID_WWN)\"/' $TMPFILE ++ sed -i '/^blacklist_exceptions[[:space:]]*{/,/^}/ s/^[[:space:]]*property[[:space:]][[:space:]]*\"(SCSI_IDENT_|ID_WWN)\"/# property \"(SCSI_IDENT_|ID_WWN)\"/' $TMPFILE + CHANGED_CONFIG=1 + fi + elif [ "$PROPERTY" = "y" ]; then +@@ -501,24 +507,24 @@ elif [ "$PROPERTY" = "y" ]; then + ' $TMPFILE + CHANGED_CONFIG=1 + elif [ "$HAVE_PROPERTY" = 0 ]; then +- sed -i '/^blacklist_exceptions[[:space:]]*{/,/^}/ s/^[[:space:]]*#[[:space:]]*property[[:space:]]*\"(SCSI_IDENT_|ID_WWN)\"/ property \"(SCSI_IDENT_|ID_WWN)\"/' $TMPFILE ++ sed -i '/^blacklist_exceptions[[:space:]]*{/,/^}/ s/^[[:space:]]*#[[:space:]]*property[[:space:]][[:space:]]*\"(SCSI_IDENT_|ID_WWN)\"/ property \"(SCSI_IDENT_|ID_WWN)\"/' $TMPFILE + CHANGED_CONFIG=1 + fi + fi + +-if [ "$FOREIGN" = "y" ]; then +- if [ "$HAVE_FOREIGN" = 1 -o "$HAVE_FOREIGN" = 2 ]; then ++if [ "$FOREIGN" = "n" ]; then ++ if [ "$HAVE_FOREIGN" = 1 -o "$HAVE_FOREIGN" = 3 ]; then + sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*enable_foreign/# enable_foreign/' $TMPFILE + CHANGED_CONFIG=1 + fi +-elif [ "$FOREIGN" = "n" ]; then ++elif [ "$FOREIGN" = "y" ]; then + if [ -z "$HAVE_FOREIGN" ]; then + sed -i '/^defaults[[:space:]]*{/ a\ +- enable_foreign "^$" ++ enable_foreign ".*" + ' $TMPFILE + CHANGED_CONFIG=1 +- elif [ "$HAVE_FOREIGN" = 0 -o "$HAVE_FOREIGN" = 2 ]; then +- sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*#\?[[:space:]]*enable_foreign.*$/ enable_foreign "^$"/' $TMPFILE ++ elif [ "$HAVE_FOREIGN" = 0 -o "$HAVE_FOREIGN" = 2 -o "$HAVE_FOREIGN" = 3 ]; then ++ sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*#\?[[:space:]]*enable_foreign.*$/ enable_foreign ".*"/' $TMPFILE + CHANGED_CONFIG=1 + fi + fi diff --git a/SOURCES/0018-multipath.conf-fix-typo-in-ghost_delay-description.patch b/SOURCES/0018-multipath.conf-fix-typo-in-ghost_delay-description.patch new file mode 100644 index 0000000..4ee62d9 --- /dev/null +++ b/SOURCES/0018-multipath.conf-fix-typo-in-ghost_delay-description.patch @@ -0,0 +1,23 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Thu, 15 Jul 2021 14:46:49 -0500 +Subject: [PATCH] multipath.conf: fix typo in ghost_delay description + +Signed-off-by: Benjamin Marzinski +--- + multipath/multipath.conf.5 | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5 +index 0d2bce09..689d09aa 100644 +--- a/multipath/multipath.conf.5 ++++ b/multipath/multipath.conf.5 +@@ -1251,7 +1251,7 @@ The default is: in \fB/sys/block//queue/max_sectors_kb\fR + Sets the number of seconds that multipath will wait after creating a device + with only ghost paths before marking it ready for use in systemd. This gives + the active paths time to appear before the multipath runs the hardware handler +-to switch the ghost paths to active ones. Setting this to \fI0\fR or \fIon\fR ++to switch the ghost paths to active ones. Setting this to \fI0\fR or \fIno\fR + makes multipath immediately mark a device with only ghost paths as ready. + .RS + .TP diff --git a/SOURCES/0019-mpathpersist-fail-commands-when-no-usable-paths-exis.patch b/SOURCES/0019-mpathpersist-fail-commands-when-no-usable-paths-exis.patch new file mode 100644 index 0000000..32f4f60 --- /dev/null +++ b/SOURCES/0019-mpathpersist-fail-commands-when-no-usable-paths-exis.patch @@ -0,0 +1,41 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Thu, 15 Jul 2021 17:09:05 -0500 +Subject: [PATCH] mpathpersist: fail commands when no usable paths exist + +"mpathpersist -oCK " will return success if it +is run on devices with no usable paths, but nothing is actually done. +The -L command will fail, but it should give up sooner, and with a more +helpful error message. + +Signed-off-by: Benjamin Marzinski +--- + libmpathpersist/mpath_persist.c | 8 +++++++- + 1 file changed, 7 insertions(+), 1 deletion(-) + +diff --git a/libmpathpersist/mpath_persist.c b/libmpathpersist/mpath_persist.c +index 190e9707..26710e79 100644 +--- a/libmpathpersist/mpath_persist.c ++++ b/libmpathpersist/mpath_persist.c +@@ -604,7 +604,8 @@ int mpath_prout_common(struct multipath *mpp,int rq_servact, int rq_scope, + return ret ; + } + } +- return MPATH_PR_SUCCESS; ++ condlog (0, "%s: no path available", mpp->wwid); ++ return MPATH_PR_DMMP_ERROR; + } + + int send_prout_activepath(char * dev, int rq_servact, int rq_scope, +@@ -663,6 +664,11 @@ int mpath_prout_rel(struct multipath *mpp,int rq_servact, int rq_scope, + + active_pathcount = count_active_paths(mpp); + ++ if (active_pathcount == 0) { ++ condlog (0, "%s: no path available", mpp->wwid); ++ return MPATH_PR_DMMP_ERROR; ++ } ++ + struct threadinfo thread[active_pathcount]; + memset(thread, 0, sizeof(thread)); + for (i = 0; i < active_pathcount; i++){ diff --git a/SOURCES/0020-multipath-print-warning-if-multipathd-is-not-running.patch b/SOURCES/0020-multipath-print-warning-if-multipathd-is-not-running.patch new file mode 100644 index 0000000..9321b28 --- /dev/null +++ b/SOURCES/0020-multipath-print-warning-if-multipathd-is-not-running.patch @@ -0,0 +1,119 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Fri, 16 Jul 2021 12:39:17 -0500 +Subject: [PATCH] multipath: print warning if multipathd is not running. + +If multipath notices that multipath devices exist or were created, and +multipathd is not running, it now prints a warning message, so users are +notified of the issue. + +Signed-off-by: Benjamin Marzinski +--- + libmultipath/configure.c | 13 +++++++++++-- + libmultipath/configure.h | 1 + + libmultipath/libmultipath.version | 5 +++++ + multipath/main.c | 5 +++++ + 4 files changed, 22 insertions(+), 2 deletions(-) + +diff --git a/libmultipath/configure.c b/libmultipath/configure.c +index 6ca1f4bb..9da85ce6 100644 +--- a/libmultipath/configure.c ++++ b/libmultipath/configure.c +@@ -1083,7 +1083,8 @@ deadmap (struct multipath * mpp) + return 1; /* dead */ + } + +-int check_daemon(void) ++extern int ++check_daemon(void) + { + int fd; + char *reply; +@@ -1138,6 +1139,8 @@ int coalesce_paths (struct vectors *vecs, vector mpvec, char *refwwid, + struct config *conf; + int allow_queueing; + struct bitfield *size_mismatch_seen; ++ bool map_processed = false; ++ bool no_daemon = false; + + /* ignore refwwid if it's empty */ + if (refwwid && !strlen(refwwid)) +@@ -1288,7 +1291,9 @@ int coalesce_paths (struct vectors *vecs, vector mpvec, char *refwwid, + conf = get_multipath_config(); + allow_queueing = conf->allow_queueing; + put_multipath_config(conf); +- if (!is_daemon && !allow_queueing && !check_daemon()) { ++ if (!is_daemon && !allow_queueing && ++ (no_daemon || !check_daemon())) { ++ no_daemon = true; + if (mpp->no_path_retry != NO_PATH_RETRY_UNDEF && + mpp->no_path_retry != NO_PATH_RETRY_FAIL) + condlog(3, "%s: multipathd not running, unset " +@@ -1311,6 +1316,7 @@ int coalesce_paths (struct vectors *vecs, vector mpvec, char *refwwid, + else + remove_map(mpp, vecs->pathvec, vecs->mpvec, + KEEP_VEC); ++ map_processed = true; + } + /* + * Flush maps with only dead paths (ie not in sysfs) +@@ -1336,6 +1342,9 @@ int coalesce_paths (struct vectors *vecs, vector mpvec, char *refwwid, + condlog(2, "%s: remove (dead)", alias); + } + } ++ if (map_processed && !is_daemon && (no_daemon || !check_daemon())) ++ condlog(2, "multipath devices exist, but multipathd service is not running"); ++ + ret = CP_OK; + out: + free(size_mismatch_seen); +diff --git a/libmultipath/configure.h b/libmultipath/configure.h +index 70cf77a3..741066b3 100644 +--- a/libmultipath/configure.h ++++ b/libmultipath/configure.h +@@ -60,3 +60,4 @@ struct udev_device *get_udev_device(const char *dev, enum devtypes dev_type); + void trigger_paths_udev_change(struct multipath *mpp, bool is_mpath); + void trigger_partitions_udev_change(struct udev_device *dev, const char *action, + int len); ++int check_daemon(void); +diff --git a/libmultipath/libmultipath.version b/libmultipath/libmultipath.version +index 0cff3111..d8be5fd2 100644 +--- a/libmultipath/libmultipath.version ++++ b/libmultipath/libmultipath.version +@@ -274,3 +274,8 @@ global: + local: + *; + }; ++ ++LIBMULTIPATH_5.1.0 { ++global: ++ check_daemon; ++} LIBMULTIPATH_5.0.0; +diff --git a/multipath/main.c b/multipath/main.c +index 9fe53dcd..85e4481d 100644 +--- a/multipath/main.c ++++ b/multipath/main.c +@@ -182,6 +182,7 @@ get_dm_mpvec (enum mpath_cmds cmd, vector curmp, vector pathvec, char * refwwid) + int i; + struct multipath * mpp; + int flags = (cmd == CMD_LIST_SHORT ? DI_NOIO : DI_ALL); ++ bool maps_present = false; + + if (dm_get_maps(curmp)) + return 1; +@@ -214,11 +215,15 @@ get_dm_mpvec (enum mpath_cmds cmd, vector curmp, vector pathvec, char * refwwid) + + if (cmd == CMD_CREATE) + reinstate_paths(mpp); ++ ++ maps_present = true; + } + + if (cmd == CMD_LIST_SHORT || cmd == CMD_LIST_LONG) + print_foreign_topology(libmp_verbosity); + ++ if (maps_present && !check_daemon()) ++ condlog(2, "multipath devices exist, but multipathd service is not running"); + return 0; + } + diff --git a/SOURCES/0021-libmultipath-deal-with-dynamic-PTHREAD_STACK_MIN.patch b/SOURCES/0021-libmultipath-deal-with-dynamic-PTHREAD_STACK_MIN.patch new file mode 100644 index 0000000..11d8b4e --- /dev/null +++ b/SOURCES/0021-libmultipath-deal-with-dynamic-PTHREAD_STACK_MIN.patch @@ -0,0 +1,31 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Benjamin Marzinski +Date: Thu, 29 Jul 2021 13:16:57 -0500 +Subject: [PATCH] libmultipath: deal with dynamic PTHREAD_STACK_MIN + +Starting in glibc-2.34 (commit 5d98a7da), PTHREAD_STACK_MIN is defined +as sysconf(_SC_THREAD_STACK_MIN) if _GNU_SOURCE is defined. sysconf() +returns a long and can, at least in theory, return -1. This change +causes compilation to fail in setup_thread_attr() due to a comparision +with different signedness, since stacksize is a size_t. + +Signed-off-by: Benjamin Marzinski +--- + libmultipath/util.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +diff --git a/libmultipath/util.c b/libmultipath/util.c +index 0e37f3ff..17f8fcc6 100644 +--- a/libmultipath/util.c ++++ b/libmultipath/util.c +@@ -223,8 +223,8 @@ setup_thread_attr(pthread_attr_t *attr, size_t stacksize, int detached) + + ret = pthread_attr_init(attr); + assert(ret == 0); +- if (stacksize < PTHREAD_STACK_MIN) +- stacksize = PTHREAD_STACK_MIN; ++ if (PTHREAD_STACK_MIN > 0 && stacksize < (size_t)PTHREAD_STACK_MIN) ++ stacksize = (size_t)PTHREAD_STACK_MIN; + ret = pthread_attr_setstacksize(attr, stacksize); + assert(ret == 0); + if (detached) { diff --git a/SOURCES/0022-multipathd-cli_handlers-cleanup-setting-reply-length.patch b/SOURCES/0022-multipathd-cli_handlers-cleanup-setting-reply-length.patch new file mode 100644 index 0000000..3099df6 --- /dev/null +++ b/SOURCES/0022-multipathd-cli_handlers-cleanup-setting-reply-length.patch @@ -0,0 +1,82 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Martin Wilck +Date: Mon, 17 May 2021 22:37:34 +0200 +Subject: [PATCH] multipathd: cli_handlers: cleanup setting reply length + +Create a macro for setting the reply length for string literals +correctly, and use it where necessary. + +In cli_del_path(), don't change the function's return code +if just the buffer allocation for the reply failed. + +Reviewed-by: Benjamin Marzinski +Signed-off-by: Benjamin Marzinski +--- + multipathd/cli_handlers.c | 33 ++++++++++++--------------------- + 1 file changed, 12 insertions(+), 21 deletions(-) + +diff --git a/multipathd/cli_handlers.c b/multipathd/cli_handlers.c +index 6765fcf0..96064944 100644 +--- a/multipathd/cli_handlers.c ++++ b/multipathd/cli_handlers.c +@@ -32,6 +32,12 @@ + #include "foreign.h" + #include "cli_handlers.h" + ++#define SET_REPLY_AND_LEN(__rep, __len, string_literal) \ ++ do { \ ++ *(__rep) = strdup(string_literal); \ ++ *(__len) = *(__rep) ? sizeof(string_literal) : 0; \ ++ } while (0) ++ + int + show_paths (char ** r, int * len, struct vectors * vecs, char * style, + int pretty) +@@ -802,8 +808,7 @@ cli_add_path (void * v, char ** reply, int * len, void * data) + } + return ev_add_path(pp, vecs, 1); + blacklisted: +- *reply = strdup("blacklisted\n"); +- *len = strlen(*reply) + 1; ++ SET_REPLY_AND_LEN(reply, len, "blacklisted\n"); + condlog(2, "%s: path blacklisted", param); + return 0; + } +@@ -824,23 +829,10 @@ cli_del_path (void * v, char ** reply, int * len, void * data) + return 1; + } + ret = ev_remove_path(pp, vecs, 1); +- if (ret == REMOVE_PATH_DELAY) { +- *reply = strdup("delayed\n"); +- if (*reply) +- *len = strlen(*reply) + 1; +- else { +- *len = 0; +- ret = REMOVE_PATH_FAILURE; +- } +- } else if (ret == REMOVE_PATH_MAP_ERROR) { +- *reply = strdup("map reload error. removed\n"); +- if (*reply) +- *len = strlen(*reply) + 1; +- else { +- *len = 0; +- ret = REMOVE_PATH_FAILURE; +- } +- } ++ if (ret == REMOVE_PATH_DELAY) ++ SET_REPLY_AND_LEN(reply, len, "delayed\n"); ++ else if (ret == REMOVE_PATH_MAP_ERROR) ++ SET_REPLY_AND_LEN(reply, len, "map reload error. removed\n"); + return (ret == REMOVE_PATH_FAILURE); + } + +@@ -865,8 +857,7 @@ cli_add_map (void * v, char ** reply, int * len, void * data) + invalid = 1; + pthread_cleanup_pop(1); + if (invalid) { +- *reply = strdup("blacklisted\n"); +- *len = strlen(*reply) + 1; ++ SET_REPLY_AND_LEN(reply, len, "blacklisted\n"); + condlog(2, "%s: map blacklisted", param); + return 1; + } diff --git a/SOURCES/multipath.conf b/SOURCES/multipath.conf new file mode 100644 index 0000000..c7684fe --- /dev/null +++ b/SOURCES/multipath.conf @@ -0,0 +1,93 @@ +# This is a basic configuration file with some examples, for device mapper +# multipath. +# +# For a complete list of the default configuration values, run either +# multipath -t +# or +# multipathd show config +# +# For a list of configuration options with descriptions, see the multipath.conf +# man page + +## By default, devices with vendor = "IBM" and product = "S/390.*" are +## blacklisted. To enable mulitpathing on these devies, uncomment the +## following lines. +#blacklist_exceptions { +# device { +# vendor "IBM" +# product "S/390.*" +# } +#} + +## Use user friendly names, instead of using WWIDs as names. +defaults { + user_friendly_names yes + find_multipaths yes +} +## +## Here is an example of how to configure some standard options. +## +# +#defaults { +# udev_dir /dev +# polling_interval 10 +# selector "round-robin 0" +# path_grouping_policy multibus +# prio alua +# path_checker readsector0 +# rr_min_io 100 +# max_fds 8192 +# rr_weight priorities +# failback immediate +# no_path_retry fail +# user_friendly_names yes +#} +## +## The wwid line in the following blacklist section is shown as an example +## of how to blacklist devices by wwid. The 2 devnode lines are the +## compiled in default blacklist. If you want to blacklist entire types +## of devices, such as all scsi devices, you should use a devnode line. +## However, if you want to blacklist specific devices, you should use +## a wwid line. Since there is no guarantee that a specific device will +## not change names on reboot (from /dev/sda to /dev/sdb for example) +## devnode lines are not recommended for blacklisting specific devices. +## +#blacklist { +# wwid 26353900f02796769 +# devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*" +# devnode "^hd[a-z]" +#} +#multipaths { +# multipath { +# wwid 3600508b4000156d700012000000b0000 +# alias yellow +# path_grouping_policy multibus +# path_checker readsector0 +# path_selector "round-robin 0" +# failback manual +# rr_weight priorities +# no_path_retry 5 +# } +# multipath { +# wwid 1DEC_____321816758474 +# alias red +# } +#} +#devices { +# device { +# vendor "COMPAQ " +# product "HSV110 (C)COMPAQ" +# path_grouping_policy multibus +# path_checker readsector0 +# path_selector "round-robin 0" +# hardware_handler "0" +# failback 15 +# rr_weight priorities +# no_path_retry queue +# } +# device { +# vendor "COMPAQ " +# product "MSA1000 " +# path_grouping_policy multibus +# } +#} diff --git a/SPECS/device-mapper-multipath.spec b/SPECS/device-mapper-multipath.spec new file mode 100644 index 0000000..c736549 --- /dev/null +++ b/SPECS/device-mapper-multipath.spec @@ -0,0 +1,1912 @@ +Name: device-mapper-multipath +Version: 0.8.6 +Release: 7%{?dist} +Summary: Tools to manage multipath devices using device-mapper +License: GPLv2 +URL: http://christophe.varoqui.free.fr/ + +# The source for this package was pulled from upstream's git repo. Use the +# following command to generate the tarball +# curl -L https://github.com/opensvc/multipath-tools/archive/0.8.6.tar.gz -o multipath-tools-0.8.6.tgz +Source0: multipath-tools-0.8.6.tgz +Source1: multipath.conf +Patch0001: 0001-RH-fixup-udev-rules-for-redhat.patch +Patch0002: 0002-RH-Remove-the-property-blacklist-exception-builtin.patch +Patch0003: 0003-RH-don-t-start-without-a-config-file.patch +Patch0004: 0004-RH-Fix-nvme-function-missing-argument.patch +Patch0005: 0005-RH-use-rpm-optflags-if-present.patch +Patch0006: 0006-RH-add-mpathconf.patch +Patch0007: 0007-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch +Patch0008: 0008-RH-reset-default-find_mutipaths-value-to-off.patch +Patch0009: 0009-RH-attempt-to-get-ANA-info-via-sysfs-first.patch +Patch0010: 0010-RH-make-parse_vpd_pg83-match-scsi_id-output.patch +Patch0011: 0011-multipathd-don-t-fail-to-remove-path-once-the-map-is.patch +Patch0012: 0012-multipathd-remove-duplicate-orphan_paths-in-flush_ma.patch +Patch0013: 0013-multipathd-fix-ev_remove_path-return-code-handling.patch +Patch0014: 0014-multipath-free-vectors-in-configure.patch +Patch0015: 0015-kpartx-Don-t-leak-memory-when-getblock-returns-NULL.patch +Patch0016: 0016-multipathd-don-t-rescan_path-on-wwid-change-in-uev_u.patch +Patch0017: 0017-RH-mpathconf-correctly-handle-spaces-after-option-na.patch +Patch0018: 0018-multipath.conf-fix-typo-in-ghost_delay-description.patch +Patch0019: 0019-mpathpersist-fail-commands-when-no-usable-paths-exis.patch +Patch0020: 0020-multipath-print-warning-if-multipathd-is-not-running.patch +Patch0021: 0021-libmultipath-deal-with-dynamic-PTHREAD_STACK_MIN.patch +Patch0022: 0022-multipathd-cli_handlers-cleanup-setting-reply-length.patch + +# runtime +Requires: %{name}-libs = %{version}-%{release} +Requires: kpartx = %{version}-%{release} +Requires: device-mapper >= 1.02.96 +Requires: userspace-rcu +Requires(post): systemd-units +Requires(preun): systemd-units +Requires(postun): systemd-units +# Starting with 0.7.7-1, 62-multipath.rules changed in a way that is +# incompatible with 65-md-incremental.rules in earlier mdadm packages. +# Later mdadm packages are compatible with any version of +# device-mapper-multipath. See bz #1628192 for more details +Conflicts: mdadm < 4.1-rc2.0.2 +# Starting with 0.7.7-1, 62-multipath.rules changed in a way that is +# incompatible with 80-udisks2.rules in earlier udisks2 packages. +# Later udisks2 packages are compatible with any version of +# device-mapper-multipath. See bz #1628192 for more details +Conflicts: udisks2 < 2.8.0-2 + +# build/setup +BuildRequires: libaio-devel, device-mapper-devel >= 1.02.89 +BuildRequires: libselinux-devel, libsepol-devel +BuildRequires: readline-devel, ncurses-devel +BuildRequires: systemd-units, systemd-devel +BuildRequires: json-c-devel, perl-interpreter, pkgconfig, gcc +BuildRequires: userspace-rcu-devel +BuildRequires: make + +%description +%{name} provides tools to manage multipath devices by +instructing the device-mapper multipath kernel module what to do. +The tools are : +* multipath - Scan the system for multipath devices and assemble them. +* multipathd - Detects when paths fail and execs multipath to update things. + +%package libs +Summary: The %{name} modules and shared library +# only libmpathcmd is LGPLv2+ +License: GPLv2 and LGPLv2+ + +%description libs +The %{name}-libs provides the path checker +and prioritizer modules. It also contains the libmpathpersist and +libmpathcmd shared libraries, as well as multipath's internal library, +libmultipath. + +%package devel +Summary: Development libraries and headers for %{name} +Requires: %{name} = %{version}-%{release} +Requires: %{name}-libs = %{version}-%{release} + +%description devel +This package contains the files need to develop applications that use +device-mapper-multipath's lbmpathpersist and libmpathcmd libraries. + +%package -n kpartx +Summary: Partition device manager for device-mapper devices + +%description -n kpartx +kpartx manages partition creation and removal for device-mapper devices. + +%package -n libdmmp +Summary: device-mapper-multipath C API library +License: GPLv3+ +Requires: json-c +Requires: %{name} = %{version}-%{release} +Requires: %{name}-libs = %{version}-%{release} + +%description -n libdmmp +This package contains the shared library for the device-mapper-multipath +C API library. + +%package -n libdmmp-devel +Summary: device-mapper-multipath C API library headers +Requires: pkgconfig +Requires: libdmmp = %{version}-%{release} + +%description -n libdmmp-devel +This package contains the files needed to develop applications that use +device-mapper-multipath's libdmmp C API library + +%prep +%autosetup -n multipath-tools-0.8.6 -p1 +cp %{SOURCE1} . + +%build +%define _sbindir /usr/sbin +%define _libdir /usr/%{_lib} +%define _udevdir /usr/lib/udev +%define _libmpathdir %{_libdir}/multipath +%define _pkgconfdir %{_libdir}/pkgconfig +%make_build LIB=%{_lib} + +%install +%make_install \ + bindir=%{_sbindir} \ + syslibdir=%{_libdir} \ + usrlibdir=%{_libdir} \ + libdir=%{_libmpathdir} \ + rcdir=%{_initrddir} \ + unitdir=%{_unitdir} \ + includedir=%{_includedir} \ + pkgconfdir=%{_pkgconfdir} + +# tree fix up +install -d %{buildroot}/etc/multipath +rm -rf %{buildroot}/%{_initrddir} + + +%post +%systemd_post multipathd.service + +%preun +%systemd_preun multipathd.service + +%postun +if [ $1 -ge 1 ] ; then + /sbin/multipathd forcequeueing daemon > /dev/null 2>&1 || : +fi +%systemd_postun_with_restart multipathd.service + +%triggerun -- %{name} < 0.4.9-37 +# make sure old systemd symlinks are removed after changing the [Install] +# section in multipathd.service from multi-user.target to sysinit.target +/bin/systemctl --quiet is-enabled multipathd.service >/dev/null 2>&1 && /bin/systemctl reenable multipathd.service ||: + +%files +%license LICENSES/GPL-2.0 LICENSES/LGPL-2.0 +%{_sbindir}/multipath +%{_sbindir}/multipathd +%{_sbindir}/mpathconf +%{_sbindir}/mpathpersist +%{_unitdir}/multipathd.service +%{_unitdir}/multipathd.socket +%{_mandir}/man5/multipath.conf.5.gz +%{_mandir}/man8/multipath.8.gz +%{_mandir}/man8/multipathd.8.gz +%{_mandir}/man8/mpathconf.8.gz +%{_mandir}/man8/mpathpersist.8.gz +%config %{_udevrulesdir}/62-multipath.rules +%config %{_udevrulesdir}/11-dm-mpath.rules +%doc README.md +%doc README.alua +%doc multipath.conf +%dir /etc/multipath + +%files libs +%license LICENSES/GPL-2.0 LICENSES/LGPL-2.0 +%doc README.md +%{_libdir}/libmultipath.so +%{_libdir}/libmultipath.so.* +%{_libdir}/libmpathpersist.so.* +%{_libdir}/libmpathcmd.so.* +%{_libdir}/libmpathvalid.so.* +%dir %{_libmpathdir} +%{_libmpathdir}/* + +%ldconfig_scriptlets libs + +%files devel +%doc README.md +%{_libdir}/libmpathpersist.so +%{_libdir}/libmpathcmd.so +%{_libdir}/libmpathvalid.so +%{_includedir}/mpath_cmd.h +%{_includedir}/mpath_persist.h +%{_includedir}/mpath_valid.h +%{_mandir}/man3/mpath_persistent_reserve_in.3.gz +%{_mandir}/man3/mpath_persistent_reserve_out.3.gz + +%files -n kpartx +%license LICENSES/GPL-2.0 +%doc README.md +%{_sbindir}/kpartx +%{_udevdir}/kpartx_id +%{_mandir}/man8/kpartx.8.gz +%config %{_udevrulesdir}/11-dm-parts.rules +%config %{_udevrulesdir}/66-kpartx.rules +%config %{_udevrulesdir}/68-del-part-nodes.rules + +%files -n libdmmp +%license LICENSES/GPL-3.0 +%doc README.md +%{_libdir}/libdmmp.so.* + +%ldconfig_scriptlets -n libdmmp + +%files -n libdmmp-devel +%doc README.md +%{_libdir}/libdmmp.so +%dir %{_includedir}/libdmmp +%{_includedir}/libdmmp/* +%{_mandir}/man3/dmmp_* +%{_mandir}/man3/libdmmp.h.3.gz +%{_pkgconfdir}/libdmmp.pc + +%changelog +* Mon Aug 09 2021 Mohan Boddu - 0.8.6-7 +- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags + Related: rhbz#1991688 + +* Fri Jul 23 2021 Benjamin Marzinski - 0.8.6-6 +- Add 0022-multipathd-cli_handlers-cleanup-setting-reply-length.patch + * Found by corosync +- Related: bz #1984921 + +* Fri Jul 23 2021 Benjamin Marzinski - 0.8.6-5 +- Add 0018-multipath.conf-fix-typo-in-ghost_delay-description.patch +- Add 0019-mpathpersist-fail-commands-when-no-usable-paths-exis.patch + * Fixes bz #1982613 +- Add 0020-multipath-print-warning-if-multipathd-is-not-running.patch + * Fixes bz #1982615 +- Add 0021-libmultipath-deal-with-dynamic-PTHREAD_STACK_MIN.patch + * Fixes bz #1984921 +- Resolves: bz #1982613, #1982615, #1984921 + +* Mon Jul 12 2021 Benjamin Marzinski - 0.8.6-4 +- Add 0017-RH-mpathconf-correctly-handle-spaces-after-option-na.patch +- Resolves: bz #1981594 + +* Wed May 19 2021 Benjamin Marzinski - 0.8.6-3 +- Add 0011-multipathd-don-t-fail-to-remove-path-once-the-map-is.patch +- Add 0012-multipathd-remove-duplicate-orphan_paths-in-flush_ma.patch +- Add 0013-multipathd-fix-ev_remove_path-return-code-handling.patch +- Add 0014-multipath-free-vectors-in-configure.patch +- Add 0015-kpartx-Don-t-leak-memory-when-getblock-returns-NULL.patch +- Add 0016-multipathd-don-t-rescan_path-on-wwid-change-in-uev_u.patch + * Above patches Fix bz #1938704 +- Resolves: bz #1938704 + +* Wed Apr 21 2021 Benjamin Marzinski - 0.8.6-2 +- Update spec file +- Related: bz #1951336 + + +* Mon Apr 19 2021 Benjamin Marzinski - 0.8.6-1 +- Update Source to upstream version 0.8.6 + * Previous patches 0001-0123 are included in the commit + * Fixes bz #1951336 +- Rename files + * Previous patches 0124-0132 are now patches 0001-0009 +- Add 0010-RH-make-parse_vpd_pg83-match-scsi_id-output.patch + * make scsi wwid fallback code result match the default udev wwid + code result (Red Hat specific patch) +- Sync tests with RHEL-8 +- Resolves: bz #1951336 + +* Thu Apr 15 2021 Mohan Boddu - 0.8.5-5 +- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937 + +* Thu Feb 11 2021 Benjamin Marzinski - 0.8.5-4 +- Update Source to upstream version 0.8.5 plus post tag commits + * Patches 0001-0121 are from + https://github.com/openSUSE/multipath-tools/tree/queue and are + already queued for upstream + * Patches 0122&0123 have been posted for upstream inclusion +- Rename files + * Previous patches 0103-0111 are now patches 0124-0132 + +* Tue Jan 26 2021 Fedora Release Engineering - 0.8.5-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild + +* Tue Jan 19 2021 Benjamin Marzinski - 0.8.5-2 +- Fix build issues + +* Tue Jan 19 2021 Benjamin Marzinski - 0.8.5-1 +- Update Source to upstream version 0.8.5 plus post tag commits + * Patches 0001-0102 are from + https://github.com/openSUSE/multipath-tools/tree/queue and are + already queued for upstream. +- Rename files + * Previous patches 0059-0068 are now patches 0103-0111 + + +* Sun Sep 27 2020 Benjamin Marzinski - 0.8.4-7 +- Add 0073-libmultipath-util-constify-function-arguments.patch +- Add 0074-libmultipath-constify-file-argument-in-config-parser.patch +- Add 0075-libmultipath-provide-defaults-for-get-put-_multipath.patch +- Add 0076-libmpathpersist-allow-using-libmultipath-get-put-_mu.patch +- Add 0077-multipath-use-get_put-_multipath_config-from-libmult.patch +- Add 0078-mpathpersist-use-get-put-_multipath_config-from-libm.patch +- Add 0079-libmultipath-add-udev-and-logsink-symbols.patch +- Add 0080-multipath-remove-logsink-and-udev.patch +- Add 0081-libmpathpersist-call-libmultipath_-init-exit.patch +- Add 0082-mpathpersist-remove-logsink-and-udev.patch +- Add 0083-multipathd-remove-logsink-and-udev.patch + * Pull in upsteam library changes +- Add 0084-libmpathvalid-use-default-_multipath_config-udev-and.patch +- Add 0085-Revert-libmultipath-add-ignore_udev_uid-option.patch +- Add 0086-libmultipath-change-log-level-for-null-uid_attribute.patch +- Add 0087-libmultipath-orphan_paths-avoid-BUG-message.patch + * update libmpathvalid to use upstream library changes. changes + submitted upstream + +* Mon Jul 27 2020 Fedora Release Engineering - 0.8.4-6 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild + +* Tue Jul 21 2020 Benjamin Marzinski - 0.8.4-5 +- Update CI tests to match RHEL + * This commit also pulls in changes from Lin Li + and Bruno Goncalves + +* Tue Jul 21 2020 Benjamin Marzinski - 0.8.4-4 +- Rebased on top of additional commits staged for upstream + * Previous patches 0048-0060 are now patches 0053-0054 & 0059-0069 +- Add 0048-libmultipath-add-device-to-hwtable.c.patch +- Add 0049-master-libmultipath-fix-use-after-free-when-iscsi-lo.patch +- Add 0050-libmultipath-warn-if-freeing-path-that-holds-mpp-hwe.patch +- Add 0051-libmultipath-warn-about-NULL-value-of-mpp-hwe.patch +- Add 0052-libmultipath-fix-mpp-hwe-handling-in-sync_paths.patch +- Add 0055-libmultipath-remove-code-duplication-in-path-countin.patch +- Add 0056-libmultipath-count-pending-paths-as-active-on-loads.patch +- Add 0057-libmultipath-deal-with-flushing-no-maps.patch +- Add 0058-multipath-deal-with-delegation-failures-correctly.patch +- Add 0070-multipath-add-libmpathvalid-library.patch + * adds the libmpathvalid.so library to determine if devices are + valid multipath paths. +- Add 0071-libmultipath-add-uid-failback-for-dasd-devices.patch +- Add 0072-libmultipath-add-ignore_udev_uid-option.patch + +* Mon Jul 13 2020 Tom Stellard - 0.8.4-3 +- Use make macros +- https://fedoraproject.org/wiki/Changes/UseMakeBuildInstallMacro + +* Wed Jul 8 2020 Benjamin Marzinski - 0.8.4-2 +- Rebased on top of Martin Wilck's queue of ACKed upstream commits + * https://github.com/openSUSE/multipath-tools/tree/upstream-queue + * All previous patches have been reordered, with the exception of + 0011-libdmmp-Add-support-for-upcoming-json-c-0.14.0.patch + which has been replaced with + 0029-fix-boolean-value-with-json-c-0.14.patch +- Modify 0054-RH-add-mpathconf.patch + * remove default enable_foreign and property blacklist_exceptions + settings, and deal with the builtin default change from + 0031-libmultipath-set-enable_foreign-to-NONE-by-default.patch. + Fixes bz #1853668 +- Add 0048-Makefile.inc-trim-extra-information-from-systemd-ver.patch +- Add 0049-kpartx-fix-Wsign-compare-error.patch + * The above two patches have been submitted upstream + +* Fri May 29 2020 Benjamin Marzinski - 0.8.4-1 +- Update Source to upstream version 0.8.4 + * Previoud patches 0001-0020 & 0031 are included in this commit +- Rename files + * Previous patches 0021-0032 are now patches 0012-0022 +- Add 0001-libmultipath-assign-variable-to-make-gcc-happy.patch +- Add 0002-libmutipath-don-t-close-fd-on-dm_lib_release.patch +- Add 0003-libmultipath-allow-force-reload-with-no-active-paths.patch +- Add 0004-libmpathpersist-depend-on-libmultipath.patch +- Add 0005-multipath-tools-Makefile-more-dependency-fixes-for-p.patch +- Add 0006-multipath-tools-Makefile.inc-set-Wno-error-clobbered.patch +- Add 0007-libmultipath-discovery.c-use-z-qualifier-for-size_t.patch +- Add 0008-libmultipath-eliminate-more-signed-unsigned-comparis.patch +- Add 0009-libmultipath-set_uint-fix-parsing-for-32bit.patch +- Add 0010-multipath-tools-Makefile-add-install-dependency.patch +- Add 0012-libmultipath-fix-condlog-NULL-argument-in-uevent_get.patch +- Add 0023-RH-work-around-gcc-10-format-truncation-issue.patch + * The above 10 patches have been submitted upstream + +* Tue Apr 21 2020 Björn Esser - 0.8.2-6 +- Rebuild (json-c) + +* Mon Apr 13 2020 Björn Esser - 0.8.2-5 +- Add 0032-add-support-for-upcoming-json-c-0.14.0.patch + +* Mon Apr 13 2020 Björn Esser - 0.8.2-4 +- Fix macro escaping in %%changelog + +* Wed Feb 12 2020 Benjamin Marzinski - 0.8.2-3 +- Add 0031-multipath-fix-issues-found-by-compiling-with-gcc-10.patch + * Patch submitted upstream +- Resolves bz #1799276 + +* Tue Jan 28 2020 Fedora Release Engineering - 0.8.2-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild + +* Wed Sep 11 2019 Benjamin Marzinski - 0.8.2-1 +- Update Source to upstream version 0.8.2 + * Previoud patches 0001-0017 & 0027 are included in this commit +- Rename files + * Previous patches 0018-0026 & 0028 are not patches 0021-0030 +- Add 0001-libmultipath-make-vector_foreach_slot_backwards-work.patch +- Add 0002-libmultipath-add-marginal-paths-and-groups-infrastru.patch +- Add 0003-tests-add-path-grouping-policy-unit-tests.patch +- Add 0004-libmultipath-add-wrapper-function-around-pgpolicyfn.patch +- Add 0005-tests-update-pgpolicy-tests-to-work-with-group_paths.patch +- Add 0006-libmultipath-fix-double-free-in-pgpolicyfn-error-pat.patch +- Add 0007-libmultipath-consolidate-group_by_-functions.patch +- Add 0008-libmultipath-make-pgpolicyfn-take-a-paths-vector.patch +- Add 0009-libmultipath-make-group_paths-handle-marginal-paths.patch +- Add 0010-tests-add-tests-for-grouping-marginal-paths.patch +- Add 0011-libmultipath-add-marginal_pathgroups-config-option.patch +- Add 0012-libmutipath-deprecate-delay_-_checks.patch +- Add 0013-multipathd-use-marginal_pathgroups.patch +- Add 0014-multipath-update-man-pages.patch + * The above 13 patches add the marinal_pathgroups option +- Add 0015-multipath.conf-add-enable_foreign-parameter.patch +- Add 0016-multipath.conf.5-document-foreign-library-support.patch + * The above 2 patches add the enable_foreign option +- Add 0017-mpathpersist-remove-broken-unused-code.patch +- Add 0018-libmultipath-EMC-PowerMax-NVMe-device-config.patch +- Add 0019-mpathpersist-fix-leaks.patch +- Add 0020-libmultipath-fix-mpcontext-initialization.patch + * The above 20 patches have been submitted upstream + +* Wed Jul 24 2019 Fedora Release Engineering - 0.8.0-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild + +* Fri Apr 12 2019 Benjamin Marzinski - 0.8.0-2 +- Add 0028-RH-attempt-to-get-ANA-info-via-sysfs-first.patch + * try to get ANA state from sysfs first, with the ioctl as a fallback + +* Thu Apr 4 2019 Benjamin Marzinski - 0.8.0-1 +- Update Source to upstream version 0.8.0 + * Previous patches 0006 & 0007 are included in this commit +- Rename files + * Previous patches 0008-0016 & 0100 are now patches 0018-0027 +- Add 0006-multipathd-Fix-miscounting-active-paths.patch +- Add 0007-multipathd-ignore-failed-wwid-recheck.patch + * multipathd will no longer disable paths if it is unable to + get their wwid on a change event +- Add 0008-libmutipath-continue-to-use-old-state-on-PATH_PENDIN.patch +- Add 0009-multipathd-use-update_path_groups-instead-of-reload_.patch +- Add 0010-multipath.conf-add-missing-options-to-man-page.patch +- Add 0011-libmultipath-add-get_uid-fallback-code-for-NVMe-devi.patch +- Add 0012-libmulitpath-cleanup-uid_fallback-code.patch +- Add 0013-multipathd-handle-changed-wwids-by-removal-and-addit.patch + * if a path device changes wwid, it will now be removed and re-added + to the correct multipath device. +- Add 0014-multipathd-remove-wwid_changed-path-attribute.patch +- Add 0015-multipathd-ignore-disable_changed_wwids.patch +- Add 0016-multipathd-Don-t-use-fallback-code-after-getting-wwi.patch +- Add 0017-libmultipath-silence-dm_is_mpath-error-messages.patch + * The above 12 patches have been submitted upstream + +* Sun Feb 17 2019 Igor Gnatenko - 0.7.9-6.git2df6110 +- Rebuild for readline 8.0 + +* Thu Jan 31 2019 Benjamin Marzinski - 0.7.9-5.git2df6110 +- Rename files + * Previous patch 0006-0014 are now patches 0008-0016 +- Add 0006-multipathd-avoid-null-pointer-dereference-in-LOG_MSG.patch +- Add 0007-multipath-blacklist-zram-devices.patch + * The above 2 patches have been submitted upstream +- Resolves: bz #1672761 + +* Thu Jan 31 2019 Benjamin Marzinski - 0.7.9-4.git2df6110 +- Update Source to latest upstream commit + * previous patch 0001-libmultipath-dm_is_mpath-cleanup.patch is included + in this commit +- Rename files + * Previous patches 0002-0009 are now patches 0006-0013 +- Add 0001-BZ-1668693-disable-user_friendly_names-for-NetApp.patch +- Add 0002-libmultipath-handle-existing-paths-in-marginal_path-.patch +- Add 0003-multipathd-cleanup-marginal-paths-checking-timers.patch +- Add 0004-libmultipath-fix-marginal-paths-queueing-errors.patch +- Add 0005-libmultipath-fix-marginal_paths-nr_active-check.patch + * The above 5 patches have been submitted upstream +- Add 0014-RH-Fix-nvme-compilation-warning.patch + * This change is only necessary because of Red Hat compilation + differences. + +* Thu Jan 31 2019 Fedora Release Engineering - 0.7.9-3.git17a6101 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild + +* Tue Jan 15 2019 Benjamin Marzinski 0.7.9-2.git17a6101 +- Update Source to latest upstream commit + * Previous patches 0001-0003 are included in this version +- Rename files + * Previous patches 0004-0011 are now patches 0002-0009 +- Add 0001-libmultipath-dm_is_mpath-cleanup.patch + * This patch has been submitted upstream + +* Mon Dec 3 2018 Benjamin Marzinski 0.7.9-1 +- Update Source to upstream version 0.7.9 + * Previous patches 0001-0006 are included in this version +- Rename files + * Previous patches 0007-0014 are now patches 0004-0011 +- Add 0001-multipathd-fix-mpp-hwe-handling-when-paths-are-freed.patch +- Add 0002-libmultipath-cleanup-pthread_cleanup_pop-call.patch +- Add 0003-libmultipath-fix-false-removes-in-dmevents-polling-c.patch + * The above 3 patches have been submitted upstream + +* Wed Oct 10 2018 Benjamin Marzinski 0.7.8-1 +- Update Source to upstream version 0.7.8 + * Previous patches 0001-0020 are included in this version +- Rename files + * Previous patches 0021-0025 are now patches 0001-0005 + * Previous patches 0026-0033 are now patches 0007-0014 +- Add 0006-libmultipath-timeout-on-unresponsive-tur-thread.patch + * has been submitted upstream + +* Tue Oct 9 2018 Benjamin Marzinski 0.7.7-7.gitb80318b +- Update Source to latest upstream commit +- Rename files + * Previous patches 0001-0020 are now patches 0002-0021 + * Previous patches 0021-0028 are now patches 0026-0033 +- Add 0001-kpartx-Use-absolute-paths-to-create-mappings.patch +- Add 0022-multipathd-check-for-NULL-udevice-in-cli_add_path.patch +- Add 0023-libmultipath-remove-max_fds-code-duplication.patch +- Add 0024-multipathd-set-return-code-for-multipathd-commands.patch +- Add 0025-mpathpersist-fix-registration-rollback-issue.patch + * The above 5 patches have been submitted upstream + +* Thu Sep 27 2018 Benjamin Marzinski 0.7.7-6.git1a8625a +- Update Source to latest upstream commit + * Previous patches 0001-0011 are included in this commit +- Rename files + * Previous patches 0012-0019 are now patches 0021-0028 +- Add 0001-libmultipath-fix-tur-checker-timeout.patch +- Add 0002-libmultipath-fix-tur-checker-double-locking.patch +- Add 0003-libmultipath-fix-tur-memory-misuse.patch +- Add 0004-libmultipath-cleanup-tur-locking.patch +- Add 0005-libmultipath-fix-tur-checker-timeout-issue.patch + * The above 5 patches cleanup locking issues with the + tur checker threads +- Add 0006-libmultipath-fix-set_int-error-path.patch +- Add 0007-libmultipath-fix-length-issues-in-get_vpd_sgio.patch +- Add 0008-libmultipath-_install_keyword-cleanup.patch +- Add 0009-libmultipath-remove-unused-code.patch +- Add 0010-libmultipath-fix-memory-issue-in-path_latency-prio.patch +- Add 0011-libmultipath-fix-null-dereference-int-alloc_path_gro.patch +- Add 0012-libmutipath-don-t-use-malformed-uevents.patch +- Add 0013-multipath-fix-max-array-size-in-print_cmd_valid.patch +- Add 0014-multipathd-function-return-value-tweaks.patch +- Add 0015-multipathd-minor-fixes.patch +- Add 0016-multipathd-remove-useless-check-and-fix-format.patch +- Add 0017-multipathd-fix-memory-leak-on-error-in-configure.patch + * The above 12 patches fix minor issues found by coverity +- Add 0018-libmultipath-Don-t-blank-intialized-paths.patch +- Add 0019-libmultipath-Fixup-updating-paths.patch + * Fix issues with paths whose wwid was not set or later changes +- Add 0020-multipath-tweak-logging-style.patch + * multipathd interactive commands now send errors to stderr, instead + of syslog + * The above 20 patches have been submitted upstream + +* Fri Sep 14 2018 Benjamin Marzinski 0.7.7-5.gitef6d98b +- Add Conflicts for mdadm < 4.1-rc2.0.2 and udisks2 < 2.8.0-2 + * Multipath udev rule update from 0.7.7-1 is incompatible with older versions + (bz #1628192) + +* Thu Jul 12 2018 Benjamin Marzinski 0.7.7-4.gitef6d98b +- Update Source to latest upstream commit + * Previous patches 0001-0018 are included in this commit +- Rename files + * Previous patches 0019-0028 are now patches 0002-0003 & 0012-0019 +- Add 0001-libmultipath-remove-last-of-rbd-code.patch +- Add 0004-mpathpersist-add-param-alltgpt-option.patch + * mpathpersist now accepts --param-alltgpt +- Add 0005-libmutipath-remove-unused-IDE-bus-type.patch +- Add 0006-multipathd-add-new-protocol-path-wildcard.patch + * multipathd show paths format now accepts %%P for the path + protocol/transport +- Add 0007-libmultipath-add-protocol-blacklist-option.patch + * You can now use the "protocol" blacklist section parameter to blacklist + by protocol/transport +- Add 0008-libmultipath-remove-_filter_-blacklist-functions.patch +- Add 0009-multipath-tests-change-to-work-with-old-make-version.patch +- Add 0010-multipath-tests-add-blacklist-tests.patch +- Add 0011-mpathpersist-add-missing-param-rk-usage-info.patch +- Refresh 0013-RH-Remove-the-property-blacklist-exception-builtin.patch +- Modify 0016-RH-add-mpathconf.patch + * improve usage message and man page + +* Thu Jul 12 2018 Fedora Release Engineering - 0.7.7-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild + +* Sat Jun 30 2018 Peter Robinson 0.7.7-2 +- Spec cleanups, drop remains of initscripts dependencies + +* Tue Jun 12 2018 Benjamin Marzinski 0.7.7-1 +- Update Source to 0.7.7 + * Previous patches 0001-0009 & 0018 are included in this commit +- Add upstream patches since 0.7.7 + * patches 0001-0012 are from upstream commits since 0.7.7 +- Add 0015-mpathpersist-add-all_tg_pt-option.patch + * add new all_tg_pt multpiath.conf option. posted upstream +- Add 0016-libmultipath-remove-rbd-code.patch + * remove unused rbd code. posted upstream +- Add 0017-mpathpersist-fix-aptpl-support.patch + * add ":aptpl" suffix for reservation_key to fix aptpl support. + posted upstream +- Add 0018-multipath-don-t-check-timestamps-without-a-path.patch + * fix multipath null dereference crash. posted upstream +- Add 0019-libmultipath-fix-detect-alua-corner-case.patch + * fix alua detection with retain_hardware_handler set to off. posted + upstream +- Add 0020-multipath-fix-setting-conf-version.patch + * multipath wasn't setting the kernel version correctly. posted upstream +- Add 0028-RH-reset-default-find_mutipaths-value-to-off.patch + * default to RHEL7 and older device detection style. Redhat specific, to + keep customer experience the same. +- Rename files + * Previous patches 0010-0011 are now patches 0013-0014 + * Previous patches 0012-0017 & 0019 are now patches 0021-0027 +- Modify 0021-RH-fixup-udev-rules-for-redhat.patch + * Fix spurious compile warning with redhat compile options + + +* Tue May 15 2018 Benjamin Marzinski 0.7.6-4.git1cb704b +- Add 0010-libmultipath-print-correct-default-for-delay_-_check.patch + * fix minor configuration printing issue +- Add 0011-multipath.conf.5-clarify-property-whitelist-handling.patch + * clarify property blacklist_excecptions handling in man page +- Rename files + * Previous patches 0010-0017 are now patches 0012-0019 +- Modify 0013-RH-Remove-the-property-blacklist-exception-builtin.patch + * clarify changes in man page + +* Tue Apr 24 2018 Benjamin Marzinski 0.7.6-3.git1cb704b +- Add 0008-multipathd-add-failures-path-format-wildcard.patch +- Add 0009-multipathd-fix-reservation_key-check.patch +- Rename files + * Previous patches 0008-0015 are now patches 0010-0017 + +* Fri Apr 13 2018 Benjamin Marzinski 0.7.6-2.git1cb704b +- Add 0007-libmultipath-Fix-logic-in-should_multipath.patch + * fix bug in identifying multipathable devices. posted upstream +- Rename files + * Previous patches 0007-0014 are now patches 0008-0015 + +* Mon Apr 02 2018 Benjamin Marzinski 0.7.6-1.git1cb704b +- Update Source to the latest upstream commit + * Previous patches 0001-0014 are included in this commit + * Previous patches 0015-0022 are now patches 0007-0014 +- 0001-multipathd-remove-incorrect-pthread_testcancel.patch + * Fixed pthread cancellation issue. posted upstream +- 0002-multipath-add-comments.patch + * Posted upstream +- 0003-multipathd-minor-dmevents-polling-code-cleanups.patch + * Fixed minor polling issues. posted upstream +- 0004-multipathd-remove-unneeded-function-parameter.patch + * Posted upstream +- 0005-mpathcmd-fix-libmpathcmd-license.patch + * License clarification. posted upstream +- 0006-libmultipath-don-t-print-undefined-values.patch + * Fixed bug in 'multipath show config'. posted upstream + +* Tue Mar 06 2018 Björn Esser - 0.7.4-2.git07e7bd5 +- Rebuilt for libjson-c.so.4 (json-c v0.13.1) + +* Thu Feb 15 2018 Benjamin Marzinski 0.7.4-1.git07e7bd5 +- Update Source to the latest upstream commit + * Previous patches 0001-0006 are included in this commit + * Previous patches 0007-0014 are now patches 0015-0022 +- Add 0001-libmultipath-fix-tur-checker-locking.patch + * Fixed spinlock bug. posted upstream +- Add 0002-multipath-fix-DEF_TIMEOUT-use.patch + * Add missing sec to ms conversion. posted upstream +- Add 0003-multipathd-remove-coalesce_paths-from-ev_add_map.patch + * Remove unused code. posted upstream +- Add 0004-multipathd-remove-unused-configure-parameter.patch + * Remove unused code. posted upstream +- Add 0005-Fix-set_no_path_retry-regression.patch + * Fix issue with queueing and path addition. posted upstream +- Add 0006-multipathd-change-spurious-uevent-msg-priority.patch + * Change message priority to Notice. posted upstream +- Add 0007-multipath-print-sysfs-state-in-fast-list-mode.patch + * Show sysfs state correctly in fast list mode (-l). posted upstream +- Add 0008-libmultipath-move-remove_map-waiter-code-to-multipat.patch + * Move code around. posted upstream +- Add 0009-move-waiter-code-from-libmultipath-to-multipathd.patch + * Move code around. posted upstream +- Add 0010-call-start_waiter_thread-before-setup_multipath.patch + * Fix race on multipath device creations. posted upstream +- Add 0011-libmultipath-add-helper-functions.patch + * posted upstream +- Add 0012-multipathd-RFC-add-new-polling-dmevents-waiter-threa.patch + * Add alternate method of getting dmevents, that doesn't + require a thread per device. posted upstream +- Add 0013-libmultipath-condlog-log-to-stderr.patch + * change condlog to log to stderr instead of stdout. posted upstream +- Add 0014-multipathd-fix-compiler-warning-for-uev_pathfail_che.patch + * fix indentation issue. posted upstream + +* Wed Feb 07 2018 Fedora Release Engineering - 0.7.3-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild + +* Sun Dec 10 2017 Björn Esser - 0.7.3-2 +- Rebuilt for libjson-c.so.3 + +* Tue Nov 7 2017 Benjamin Marzinski 0.7.3-1 +- Update Source to upstream 0.7.3 release + * Previous patch 0001 is included in this commit, and 0002 was solved in a + different manner causing some change to previous patch 0003 + * Previous patches 0003-0010 are now patches 0007-0014 +- Add 0001-mpathpersist-Fix-invalid-condition-check.patch + * Fix incorrect check. posted upstream +- Add 0002-multipath-add-man-page-info-for-my-prkey-changes.patch + * Add missing man page info. posted upstream +- Add 0003-multipath-there-is-no-none-path-state.patch + * remove incorrect path state. posted upstream +- Add 0004-mutipath-updated-Huawei-storage-config.patch + * update builtin device configuration. posted upstream +- Add 0005-multipath-fix-doc-typo.patch + * fix man page typo. posted upstream +- Add 0006-multipath-add-ghost_delay-parameter.patch + * add new multipath.conf parameter "ghost_delay". posted upstream + + +* Tue Nov 7 2017 Benjamin Marzinski 0.7.1-8.git847cc43 +- Refresh 0001-libmultipath-update-3PARdata-builtin-config.patch +- Add 0010-RH-warn-on-invalid-regex-instead-of-failing.patch + * Change old-style multipath.conf regex "*" to a proper ".*" instead of + failing + +* Wed Aug 2 2017 Benjamin Marzinski 0.7.1-7.git847cc43 +- Modify 0005-RH-don-t-start-without-a-config-file.patch + * Fix man page typos + +* Mon Jul 31 2017 Troy Dawson - 0.7.1-6.git847cc43 +- Clean spec file - remove pre-fedora 23 cruft + +* Wed Jul 26 2017 Fedora Release Engineering - 0.7.1-5.git847cc43 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild + +* Fri Jul 21 2017 Benjamin Marzinski 0.7.1-4.git847cc43 +- Update Source to the latest upstream commit + * Previous patches 0001 and 0010-0013 are included in this commit. +- Add 0001-libmultipath-update-3PARdata-builtin-config.patch + * Change for building configuration. Posted upstream +- Modify 0006-RH-use-rpm-optflags-if-present.patch + * Add missing lines to actually use RPM_OPT_FLAGS. + +* Fri Jun 23 2017 Tom Callaway - 0.7.1-3.gitf21166a +- rebuild to resolve broken deps + +* Fri Jun 2 2017 Benjamin Marzinski 0.7.1-2.gitf21166a +- Modify 0004-RH-Remove-the-property-blacklist-exception-builtin.patch + * update multipath.conf.5 man page to remove builtin listing +- Modify 0005-RH-don-t-start-without-a-config-file.patch + * update multipathd.8 man page to note that a config file is necessary +- Modify 0007-RH-add-mpathconf.patch + * add property blacklist-exception to default config file +- Add 0010-libmultipath-change-how-RADOS-checker-is-enabled.patch + * Makefile now autodetects librados. Posted upstream +- Remove related RADOS option from spec file +- Add 0011-multipath-set-verbosity-to-default-during-config.patch + * Allow multipath to print warning messages during configuration. + Posted upstream +- Add 0012-mpath-skip-device-configs-without-vendor-product.patch + * device entries without vendor/product were breaking configurations. + Posted upsteam +- Add 0013-multipathd-fix-show-maps-json-crash.patch + * multipathd crashed showing json output with no devices. Posted + upstream + +* Tue May 23 2017 Benjamin Marzinski 0.7.1-1.gitf21166a +- Update Source to the latest upstream commit +- Add 0001-libmultipath-add-comment-about-resuming.patch + * posted upstream +- Add 0002-multipath-attempt-at-common-multipath.rules.patch + * under discussion upstream +- Add 0003-RH-fixup-udev-rules-for-redhat.patch + * Redhat uses different udev rules that some other distros, so multipath + has run at a different time. Not all upstream distros link /sbin and + /usr/sbin either. +- Add 0004-RH-Remove-the-property-blacklist-exception-builtin.patch + * Allow multipath to be used on devices without multiple paths. NAK'ed + upstream, but requested by Red Hat +- Add 0005-RH-don-t-start-without-a-config-file.patch + * Don't start multipath unless a config file exists. NAK'ed upstream, + but requested by Red Hat +- Add 0006-RH-use-rpm-optflags-if-present.patch + * Make the build system fedora friendly +- Add 0007-RH-add-mpathconf.patch + * Add tool to help configure multipath with Red Hat defaults. +- Add 0008-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch + * Make multipath able to claim devices based on the kernel command line + NAK'ed upstream but requested by Red Hat +- Add 0009-RH-trigger-change-uevent-on-new-device-creation.patch + * under discussion upstream + +* Wed Apr 12 2017 Benjamin Marzinski 0.4.9-87 +- Remove Epoch from device-mapper requires + * The RHEL releases of device-mapper set the Epoch, and this was + accidentally retained in the fedora spec file. + +* Fri Apr 7 2017 Benjamin Marzinski 0.4.9-86 +- Modify 0136-RHBZ-1304687-wait-for-map-add.patch + * switch to missing_uev_wait_timeout to stop waiting for uev +- Refresh 0137-RHBZ-1280524-clear-chkr-msg.patch +- Refresh 0150-RHBZ-1253913-fix-startup-msg.patch +- Refresh 0154-UPBZ-1291406-disable-reinstate.patch +- Refresh 0156-UPBZ-1313324-dont-fail-discovery.patch +- Refresh 0161-RHBZ-1311659-no-kpartx.patch +- Refresh 0167-RHBZ-1335176-fix-show-cmds.patch +- Add 0173-RH-update-man-page.patch +- Add 0174-RHBZ-1362396-modprobe.patch + * make starting the multipathd service modprobe dm-multipath in the + sysvinit scripts +- Add 0175-RHBZ-1357382-ordering.patch + * force multipathd.service to start after systemd-udev-trigger.service +- Add 0176-RHBZ-1363830-fix-rename.patch + * initialized a variable to make dm_rename not fail randomly +- Add 0177-libmultipath-correctly-initialize-pp-sg_id.patch + * This and all the following patches add the rbd patch checker +- Add 0178-libmultipath-add-rbd-discovery.patch +- Add 0179-multipath-tools-add-checker-callout-to-repair-path.patch +- Add 0180-multipath-tools-Add-rbd-checker.patch +- Add 0181-multipath-tools-Add-rbd-to-the-hwtable.patch +- Add 0182-multipath-tools-check-for-initialized-checker-before.patch +- Add 0183-multipathd-Don-t-call-repair-on-blacklisted-path.patch +- Add 0184-rbd-fix-sync-repair-support.patch +- Add 0185-rbd-check-for-nonshared-clients.patch +- Add 0186-rbd-check-for-exclusive-lock-enabled.patch +- Add 0187-rbd-fixup-log-messages.patch +- Add 0188-RHBZ-1368501-dont-exit.patch + * make multipathd not exit if it encounters recoverable errors on startup +- Add 0189-RHBZ-1368211-remove-retries.patch + * add "remove_retries" multipath.conf parameter to make multiple attempts + to remove a multipath device if it is busy. +- Add 0190-RHBZ-1380602-rbd-lock-on-read.patch + * pass lock_on_read when remapping image +- Add 0191-RHBZ-1169168-disable-changed-paths.patch + * add "disabled_changed_wwids" multipath.conf parameter to disable + paths whose wwid changes +- Add 0192-RHBZ-1362409-infinibox-config.patch +- Add 0194-RHBZ-1351964-kpartx-recurse.patch + * fix recursion on corrupt dos partitions +- Add 0195-RHBZ-1359510-no-daemon-msg.patch + * print a messages when multipathd isn't running +- Add 0196-RHBZ-1239173-dont-set-flag.patch + * don't set reload flag on reloads when you gain your first + valid path +- Add 0197-RHBZ-1394059-max-sectors-kb.patch + * add "max_sectors_kb" multipath.conf parameter to set max_sectors_kb + on a multipath device and all its path devices +- Add 0198-RHBZ-1372032-detect-path-checker.patch + * add "detect_checker" multipath.conf parameter to detect ALUA arrays + and set the path checker to TUR +- Add 0199-RHBZ-1279355-3pardata-config.patch +- Add 0200-RHBZ-1402092-orphan-status.patch + * clear status on orphan paths +- Add 0201-RHBZ-1403552-silence-warning.patch +- Add 0202-RHBZ-1362120-skip-prio.patch + * don't run prio on failed paths +- Add 0203-RHBZ-1363718-add-msgs.patch +- Add 0204-RHBZ-1406226-nimble-config.patch +- Add 0205-RHBZ-1416569-reset-stats.patch + * add "reset maps stats" and "reset map stats" multipathd + interactive commands to reset the stats tracked by multipathd +- Add 0206-RHBZ-1239173-pt2-no-paths.patch + * make multipath correctly disable scanning and rules running when + it gets a uevent and there are not valid paths. +- Add 0207-UP-add-libmpathcmd.patch + * New shared library, libmpathcmd, that sends and receives messages from + multipathd. device-mapper-multipath now uses this library internally. +- Add 0208-UPBZ-1430097-multipathd-IPC-changes.patch + * validation that modifying commands are coming from root. +- Add 0209-UPBZ-1430097-multipath-C-API.patch + * New shared library. libdmmp, that presents the information from multipathd + in a structured manner to make it easier for callers to use +- Add 0210-RH-fix-uninstall.patch + * Minor compilation fixes +- Add 0211-RH-strlen-fix.patch + * checks that variables are not NULL before passing them to strlen +- Add 0212-RHBZ-1431562-for-read-only.patch +- Make 3 new subpackages + * device-mapper-multipath-devel, libdmmp, and libdmmp-devel. libmpathcmd + and libmpathprio are in device-mapper-multipath-libs and + device-mapper-multipath-devel. libdmmp is in its own subpackages +- Move libmpathprio devel files to device-mapper-multipath-devel +- Added BuildRequires on librados2-devel + + +* Fri Feb 10 2017 Fedora Release Engineering - 0.4.9-85 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild + +* Thu Jan 12 2017 Igor Gnatenko - 0.4.9-84 +- Rebuild for readline 7.x + +* Fri Jul 22 2016 Benjamin Marzinski 0.4.9-83 +- Modify 0135-RHBZ-1299600-path-dev-uevents.patch + * trigger uevents when adding wwids for existing devices during startup +- Refresh 0136-RHBZ-1304687-wait-for-map-add.patch +- Refresh 0150-RHBZ-1253913-fix-startup-msg.patch +- Modify 0159-UPBZ-1255885-udev-waits.patch + * fix bug in failure path +- Add 0160-RH-udev-flags.patch +- Add 0161-RHBZ-1311659-no-kpartx.patch + * skip_kpartx option disables kpartx running on multipath devices +- Add 0162-RHBZ-1333331-huawei-config.patch + * Add default config for Huawei XSG1 array +- Add 0163-UPBZ-1333492-resize-map.patch + * restore old size if resize fails +- Add 0164-RHBZ-1311463-dos-part-rollover.patch + * fix incorrect partition size due to 4k device size rollover +- Add 0165-UPBZ-1341748-MSA-2040-conf.patch + * Add default config for MSA 2040 array +- Add 0166-RHBZ-1323429-dont-allow-new-wwid.patch + * don't allow path wwid to change while it is in use +- Add 0167-RHBZ-1335176-fix-show-cmds.patch + * and new show multipath format wildcard, 'f' to sho number of failures. + This will hopefully be useful for tracking what happens to multipath + devices for bz #1335176 +- Add 0168-RHBZ-1347769-shared-lock.patch + * make multipath lock the path devices with a shared lock +- Add 0169-UPBZ-1353357-json-output.patch + * add mulitpathd json output command +- Add 0170-UPBZ-1352925-fix-typo.patch +- Add 0171-UPBZ-1356651-allow-zero-size.patch + * Allow zero-sized paths to be added to a multipath device +- Add 0172-RHBZ-1350931-no-active-add.patch + * Allow paths to be added to a new map if no active paths exist. Also + fixes 1351430 + + +* Thu Apr 21 2016 Benjamin Marzinski 0.4.9-82 +- Modify 0005-RH-add-mpathconf.patch + * changed warning message +- Modify 0102-RHBZ-1160478-mpathconf-template.patch + * updated man page +- Modify 0104-RHBZ-631009-deferred-remove.patch + * refactor code and minor fix +- Refresh 0107-RHBZ-1169935-no-new-devs.patch +- Refresh 0112-RHBZ-1194917-add-config_dir-option.patch +- Refresh 0126-RHBZ-1211383-alias-collision.patch +- Add 0133-RHBZ-1296979-fix-define.patch + * look for the correct libudev function to set define +- Add 0134-RHBZ-1241528-check-mpath-prefix.patch + * only touch devices with a "mpath-" dm uuid prefix +- Add 0135-RHBZ-1299600-path-dev-uevents.patch + * trigger path uevent the first time a path is claimed by multipath +- Add 0136-RHBZ-1304687-wait-for-map-add.patch + * wait for the device to finish being added before reloading it. +- Add 0137-RHBZ-1280524-clear-chkr-msg.patch +- Add 0138-RHBZ-1288660-fix-mpathconf-allow.patch + * don't remove existing lines from blacklist_exceptions section +- Add 0139-RHBZ-1273173-queue-no-daemon-doc.patch +- Add 0140-RHBZ-1299647-fix-help.patch +- Add 0141-RHBZ-1303953-mpathpersist-typo.patch +- Add 0142-RHBZ-1283750-kpartx-fix.patch + * only remove devices if their uuid says that they are the correct + partition device +- Add 0143-RHBZ-1299648-kpartx-sync.patch + * default to using udev sync mode +- Add 0144-RHBZ-1299652-alua-pref-arg.patch + * allow "exclusive_pref_bit" argument to alua prioritizer +- Add 0145-UP-resize-help-msg.patch +- Add 0146-UPBZ-1299651-raw-output.patch + * allow raw format mutipathd show commands, that remove headers and padding +- Add 0147-RHBZ-1272620-fail-rm-msg.patch +- Add 0148-RHBZ-1292599-verify-before-remove.patch + * verify that all partitions are unused before attempting to remove a device +- Add 0149-RHBZ-1292599-restore-removed-parts.patch + * don't disable kpartx when restoring the first path of a device. +- Add 0150-RHBZ-1253913-fix-startup-msg.patch + * wait for multipathd daemon to write pidfile before returning +- Add 0151-RHBZ-1297456-weighted-fix.patch + * add wwn keyword to weighted prioritizer for persistent naming +- Add 0152-RHBZ-1269293-fix-blk-unit-file.patch + * use "Wants" instead of "Requires" +- Add 0153-RH-fix-i686-size-bug.patch + * use 64-bit keycodes for multipathd client commands +- Add 0154-UPBZ-1291406-disable-reinstate.patch + * don't automatically reinstate ghost paths for implicit alua devices +- Add 0155-UPBZ-1300415-PURE-config.patch + * Add default config for PURE FlashArray +- Add 0156-UPBZ-1313324-dont-fail-discovery.patch + * don't fail discovery because individual paths failed. +- Add 0157-RHBZ-1319853-multipath-c-error-msg.patch + * better error reporting for multipath -c +- Add 0158-RHBZ-1318581-timestamp-doc-fix.patch + * add documentation for -T +- Add 0159-UPBZ-1255885-udev-waits.patch + * make multipath and kpartx wait after for udev after each command + +* Wed Feb 03 2016 Fedora Release Engineering - 0.4.9-81 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild + +* Fri Sep 25 2015 Benjamin Marzinski 0.4.9-80 +- Add 0131-RHBZ-1259523-host_name_len.patch + * increase size of host string +- Add 0132-UPBZ-1259831-lock-retry.patch + * retry locking when creating multipath devices + +* Mon Aug 17 2015 Benjamin Marzinski 0.4.9-79 +- Add 0130-UPBZ-1254292-iscsi-targetname.patch + * check for targetname iscsi sysfs value + +* Thu Aug 13 2015 Benjamin Marzinski 0.4.9-78 +- fix triggerun issue and updated requires in spec file. + +* Fri Aug 7 2015 Benjamin Marzinski 0.4.9-77 +- Modify 0104-RHBZ-631009-deferred-remove.patch + * add man page info +- Refresh 0112-RHBZ-1194917-add-config_dir-option.patch +- Refresh 0114-RHBZ-1196394-delayed-reintegration.patch +- Add 0118-UPBZ-1200738-update-eternus-config.patch + * update default config +- Add 0119-RHBZ-1081397-save-alua-info.patch + * make prioritizers save information between calls to speed them up. +- Add 0120-RHBZ-1043093-realloc-fix.patch + * free old memory if realloc fails. +- Add 0121-RHBZ-1197234-rules-fix.patch + * make sure kpartx runs after an DM_ACTIVATION event occurs. +- Add 0122-RHBZ-1212590-dont-use-var.patch + * use /run instead of /var/run +- Add 0123-UPBZ-1166072-fix-path-offline.patch + * Don't mark quiesce and transport-offline paths as offline +- Add 0124-RHBZ-1209275-retrigger-uevents.patch + * Make multipathd retrigger uevents when paths haven't successfully had + their udev_attribute environment variable set by udev and add + "retrigger_ties" and "retrigger_delay" to control this +- Add 0125-RHBZ-1153832-kpartx-delete.patch + * Delete all partition devices with -d (not just the ones in the partition + table) +- Add 0126-RHBZ-1211383-alias-collision.patch + * make multipathd use the old alias, if rename failed and add + "new_bindings_in_boot" to determine if new bindings can be added to + the bindings file in the initramfs +- Add 0127-RHBZ-1201030-use-blk-availability.patch + * Make multipath use blk-availability.service +- Add 0128-RHBZ-1222123-mpathconf-allow.patch + * Add mpathconf --allow for creating specialized config files. +- Add 0129-RHBZ-1241774-sun-partition-numbering.patch + * Make kpartx correctly number sun partitions. + + +* Wed Jun 17 2015 Fedora Release Engineering - 0.4.9-76 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild + +* Wed Mar 11 2015 Benjamin Marzinski 0.4.9-75 +- Add 0111-RH-dont-show-pg-timeout.patch + * The kernel doesn't support pg_timeout, so multipath shouldn't + bother to display it +- Add 0112-RHBZ-1194917-add-config_dir-option.patch + * multipath will now also read its configuration from files with + the .conf suffix in the directory specified by config_dir + which defaults to /etc/multipath/conf.d +- Add 0113-RHBZ-1194917-cleanup.patch + * cleanup some unnecessary code +- Add 0114-RHBZ-1196394-delayed-reintegration.patch + * Add "delay_watch_checks" and "delay_wait_checks" options to delay + reintegration of flakey paths. +- Add 0115-RHBZ-1198418-fix-double-free.patch + * multipath was freeing the multipath alias twice if it failed to create the + multipath device. +- Add 0116-UPBZ-1188179-dell-36xxi.patch + * new builtin configurations. +- Add 0117-RHBZ-1198424-autodetect-clariion-alua.patch + * configure multipath to automatically detect alua settings on clariion + devices. + +* Thu Mar 05 2015 Adam Jackson 0.4.9-74 +- Drop sysvinit subpackage from F23+ + +* Wed Feb 18 2015 Benjamin Marzinski 0.4.9-73 +- Add 0110-RHBZ-blacklist-vd-devs.patch + * blacklist vd[a-z] devices, since they don't have a WWID for + multipath to use. + +* Thu Dec 18 2014 Benjamin Marzinski 0.4.9-72 +- Modify 0107-RHBZ-1169935-no-new-devs.patch + * instead of using "-n" there is now a new configuration option, + 'ignore_new_boot_devs'. If set to 'yes', multipath will ignore + devices that aren't in /etc/multipath/wwids when running in the + initramfs. This option does nothing while multipathd is running + in the real root filesystem. +- Update 0109-RH-read-only-bindings.patch + +* Mon Dec 15 2014 Benjamin Marzinski 0.4.9-71 +- Add 0103-RH-cleanup-partmaps-code.patch + * code refactoring to prepare for next patch +- Add 0104-RHBZ-631009-deferred-remove.patch + * add deferred_remove option to /etc/multipath.conf +- Add 0105-RHBZ-1148979-fix-partition-mapping-creation-race-with-kpartx.patch + * Only run kpartx on device activation +- Add 0106-RHBZ-1159337-fix-double-free.patch + * made ev_remove_path exit immediately after failing setup_multipath, since + it handles cleaning up the device +- Add 0107-RHBZ-1169935-no-new-devs.patch + * Add new multipathd option '-n' which keeps multipathd from creating any + multipath devices that aren't in the /etc/multipath/wwids file. +- Add 0108-RHBZ-1153832-kpartx-remove-devs.patch + * switch from 'kpartx -a' to 'kpartx -u' to remove missing devices as well. +- Add 0109-RH-read-only-bindings.patch + * re-enabled -B option for multipathd + +* Tue Dec 9 2014 Benjamin Marzinski 0.4.9-70 +- Add 0102-RHBZ-1160478-mpathconf-template.patch + * mpathconf no longer copies the default config template for the + docs directory. It simply writes the template itself. +- Resolves: bz# 1160478 + +* Thu Nov 13 2014 Benjmain Marzinski 0.4.9-69 +- Rebuild + +* Tue Sep 16 2014 Benjamin Marzinski 0.4.9-68 +- Modify multipath.conf + * remove getuid_callout example +- Re-add 0050-RH-listing-speedup.patch +- Add 0081-RHBZ-1066264-check-prefix-on-rename.patch + * make multipath check the prefix on kpartx partitions during rename, and + copy the existing behaviour +- Add 0082-UPBZ-1109995-no-sync-turs-on-pthread_cancel.patch + * If async tur checker fails on threads, don't retry with the sync version +- Add 0083-RHBZ-1080055-orphan-paths-on-reload.patch + * Fix case where pathlist wasn't getting updated properly +- Add 0084-RHBZ-1110000-multipath-man.patch + * fix errors in multipath man page +- Add 0085-UPBZ-1110006-datacore-config.patch + * Add support for DataCore Virtual Disk +- Add 0086-RHBZ-1110007-orphan-path-on-failed-add.patch + * If multipathd fails to add path correctly, it now fully orphans the path +- Add 0087-RHBZ-1110013-config-error-checking.patch + * Improve multipath.conf error checking. +- Add 0088-RHBZ-1069811-configurable-prio-timeout.patch + * checker_timeout now adjusts the timeouts of the prioritizers as well. +- Add 0089-RHBZ-1110016-add-noasync-option.patch + * Add a new defaults option, "force_sync", that disables the async mode + of the path checkers. This is for cases where to many parallel checkers + hog the cpu +- Add 0090-UPBZ-1080038-reorder-paths-for-round-robin.patch + * make multipathd order paths for better throughput in round-robin mode +- Add 0091-RHBZ-1069584-fix-empty-values-fast-io-fail-and-dev-loss.patch + * check for null pointers in configuration reading code. +- Add 0092-UPBZ-1104605-reload-on-rename.patch + * Reload table on rename if necessary +- Add 0093-UPBZ-1086825-user-friendly-name-remap.patch + * Keep existing user_friend_name if possible +- Add 0094-RHBZ-1086825-cleanup-remap.patch + * Cleanup issues with upstream patch +- Add 0095-RHBZ-1127944-xtremIO-config.patch + * Add support for EMC ExtremIO devices +- Add 0096-RHBZ-979474-new-wildcards.patch + * Add N, n, R, and r path wildcards to print World Wide ids +- Add 0097-RH-fix-coverity-errors.patch + * Fix a number of unterminated strings and memory leaks on failure + paths. +- Add 0098-UPBZ-1067171-mutipath-i.patch + * Add -i option to ignore wwids file when checking for valid paths +- Add 0099-RH-add-all-devs.patch + * Add new devices config option all_devs. This makes the configuration + overwrite the specified values in all builtin configs +- Add 0100-RHBZ-1067171-multipath-i-update.patch + * make -i work correctly with find_multipaths +- Add 0101-RH-adapter-name-wildcard.patch + * Add 'a' path wildcard to print adapter name + +* Sat Aug 16 2014 Fedora Release Engineering - 0.4.9-67 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild + +* Fri Jul 11 2014 Tom Callaway - 0.4.9-66 +- fix license handling + +* Sat Jun 07 2014 Fedora Release Engineering - 0.4.9-65 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild + +* Mon Mar 31 2014 Benjamin Marzinski 0.4.9-64 +- Modify 0076-RHBZ-1056686-add-hw_str_match.patch + * free temporary memory used during configuration +- Add 0078-RHBZ-1054044-fix-mpathconf-manpage.patch + * fix typo +- Add 0079-RHBZ-1070581-add-wwid-option.patch + * add multipath option "-a". To add a device's wwid to the wwids file +- Add 0080-RHBZ-1075796-cmdline-wwid.patch + * add multipath option "-A" to add wwids specified by the kernel + command line mapth.wwid options. + +* Fri Jan 24 2014 Benjamin Marzinski 0.4.9-63 +- Add 0074-RHBZ-1056976-dm-mpath-rules.patch + * Add rules to keep from doing work in udev if there are no + active paths, or if the event was for a multipath device + reloading its table due to a path change. +- Add 0075-RHBZ-1056976-reload-flag.patch + * multipath code to identify reloads that the new rules can + ignore +- Add 0076-RHBZ-1056686-add-hw_str_match.patch + * add a new default config paramter, "hw_str_match", to make user + device configs only overwrite builtin device configs if the + identifier strings match exactly, like the default in RHEL6. + +* Fri Jan 10 2014 Benjamin Marzinski 0.4.9-62 +- Modify 0072-RHBZ-1039199-check-loop-control.patch + * only call close on the /dev/loop-control fd the open succeeds +- Add 0073-RH-update-build-flags.patch + * fix print call to work with -Werror=format-security compile flag + +* Tue Dec 10 2013 Benjamin Marzinski 0.4.9-61 +- Add 0072-RHBZ-1039199-check-loop-control.patch + * Make kpartx use LOOP_CTL_GET_FREE and loop-control to find a free + loop device. This will autoload the loop module. + +* Mon Dec 9 2013 Benjamin Marzinski 0.4.9-60 +- Add 0067-RHBZ-1022899-fix-udev-partition-handling.patch + * Make sure to wipe partition devices on change event if they weren't + wiped on the device add event +- Add 0068-RHBZ-1034578-label-partition-devices.patch + * Make sure that partition devices are labeled like the whole device +- Add 0069-UPBZ-1033791-improve-rdac-checker.patch + * Use RTPG data in RDAC checker +- Add 0070-RHBZ-1036503-blacklist-td-devs.patch +- Add 0071-RHBZ-1031546-strip-dev.patch + * make multipathd interactive commands able to handle /dev/ + instead of just + +* Sat Oct 12 2013 Benjamin Marzinski 0.4.9-59 +- Add 0066-UP-dos-4k-partition-fix.patch + * Make kpartx correctly handle 4K sector size devices with dos partitions. + +* Fri Sep 27 2013 Benjamin Marzinski 0.4.9-58 +- Add 0065-UPBZ-995538-fail-rdac-on-unavailable.patch + * make rdac checker always mark paths with asymmetric access state of + unavailable as down + +* Fri Sep 20 2013 Benjamin Marzinski 0.4.9-57 +- Add 0063-RH-fix-warning.patch + * Fix complier warning +- 0064-fix-ID_FS-attrs.patch + * make multipath create a timestamp file /run/multipathd/timestamp, and + add -T: option to shortcut processing if the + timestamp hasn't changed + +* Thu Sep 5 2013 Benjamin Marzinski 0.4.9-56 +- Add 0061-RH-display-find-mpaths.patch + * display the find_multipaths value in show config +- Add 0062-RH-dont-free-vecs.patch + * don't free the vecs structure on shutdown. It's more pain than + it's worth. + +* Thu Jul 25 2013 Benjamin Marzinski 0.4.9-55 +- Modify 0015-RH-fix-output-buffer.patch + * Fix memory leak +- Add 0047-RHBZ-kpartx-read-only-loop-devs.patch + * Fix read only loop device handling +- Add 0048-RH-print-defaults.patch +- Add 0049-RH-remove-ID_FS_TYPE.patch + * remove ID_FS_TYPE udev enviroment variable for multipath devices +- Add 0051-UP-fix-cli-resize.patch + * check before dereferencing variables +- Add 0052-RH-fix-bad-derefs.patch + * setup multipath free the multipath device when it fails, so don't keep + using it. +- Add 0053-UP-fix-failback.patch + * setting failback in the devices section was broken +- Add 0054-UP-keep-udev-ref.patch + * multipathd needs to keep the same udev object across reconfigures +- Add 0055-UP-handle-quiesced-paths.patch + * quiesced paths should be treated as down +- Add 0056-UP-alua-prio-fix.patch + * Don't count the preferred bit for paths that are active/optimized +- Add 0057-UP-fix-tmo.patch + * Cleanup how multipath sets dev_loss_tmo and fast_io_fail_tmo. Also + make multipath get changing values directly from sysfs, instead of + from udev, which caches them. +- Add 0058-UP-fix-failback.patch + * make failback print the default value when you show configs. +- Add 0059-UP-flush-failure-queueing.patch + * If you can't flush a multipath device, restore the queue_if_no_paths + value +- Add 0060-UP-uevent-loop-udev.patch + * make ueventloop grab it's own udev reference, since it is cancelled + asychnrously. + +* Fri Jul 5 2013 Benjamin Marzinski 0.4.9-54 +- Add 0047-RHBZ-980777-kpartx-read-only-loop-devs.patch + * make kpartx support read-only files better +- Resolves: bz #980777 + +* Wed Jul 3 2013 Benjamin Marzinski 0.4.9-53 +- Add 0044-RHBZ-976688-fix-wipe-wwids.patch + * Seek back to the start of the file after truncating it +- Add 0045-RHBZ-977297-man-page-fix.patch + * update man page to match actual defaults +- Add 0046-RHBZ-883981-move-udev-rules.patch + * move udev rules file from /lib to /usr/lib +- Resolves: bz #883981, #976688, #977297 + +* Fri Jun 21 2013 Benjamin Marzinski 0.4.9-52 +- Add 0038-RHBZ-799860-netapp-config.patch +- Add 0039-RH-detect-prio-fix.patch + * Don't autodetect ALUA prioritizer unless it actually can get a priority +- Add 0040-RH-bindings-fix.patch + * Do a better job of trying to get the first free user_friendly_name +- Add 0041-RH-check-for-erofs.patch + * Don't create/reload a device read-only unless doing it read/write fails + with EROFS +- Remove 0017-RH-fix-sigusr1.patch + * fix signal handling upstream way instead +- Add 0042-UP-fix-signal-handling.patch + * uxlsnr now handles all the signals sent to multipathd. This makes its + signal handling posix compliant, and harder to mess up. +- Add 0043-RH-signal-waiter.patch + * ioctl isn't a pthread cancellation point. Send a signal to the waiter + thread to break out of waiting in ioctl for a dm event. + +* Fri May 17 2013 Benjamin Marzinski 0.4.9-51 +- Add 0032-RHBZ-956464-mpathconf-defaults.patch + * fix defaults listed in usage +- Add 0033-RHBZ-829963-e-series-conf.patch +- Add 0034-RHBZ-851416-mpathconf-display.patch + * display whether or not multipathd is running in the status +- Add 0035-RHBZ-891921-list-mpp.patch + * add a new path format wilcard to list the multipath device associated + with a path +- Add 0036-RHBZ-949239-load-multipath-module.patch + * load the dm-multipath kernel module when multipathd starts +- Add 0037-RHBZ-768873-fix-rename.patch + * When deciding on a multipth devices name on reload, don't default to + the existing name if there is no config file alias and user_friendly_names + isn't set. Use the wwid. +- Modify multipath.conf +- Resolves: bz #768873, #950252 + +* Tue Apr 30 2013 Benjamin Marzinski 0.4.9-50 +- Add 0031-RHBZ-957188-kpartx-use-dm-name.patch + * use the basename of the devices that will be created to choose the + delimiter instead of using the device name from the command line +- Resolves: bz #957188 + +* Fri Apr 26 2013 Benjamin Marzinski 0.4.9-49 +- Modify 0020-RHBZ-907360-static-pthread-init.patch + * Don't initialize uevent list twice +- Add 0029-RH-no-prio-put-msg.patch +- Add 0030-RHBZ-916528-override-queue-no-daemon.patch + * Default to "queue_without_daemon no" + * Add "forcequeueing daemon" and "restorequeueing daemon" cli commands +- Modify spec file to force queue_without_daemon when restarting + multipathd on upgrades. + +* Thu Apr 4 2013 Benjamin Marzinski 0.4.9-48 +- Add 0026-fix-checker-time.patch + * Once multipathd hit it max checker interval, it was reverting to + to shortest checker interval +- Add 0027-RH-get-wwid.patch + * Multipath wasn't correctly setting the multipath wwid when it read devices + in from the kernel +- Add 0028-RHBZ-929078-refresh-udev-dev.patch + * Make multipath try to get the UID of down devices. Also, on ev_add_path, + make multipathd reinitialize existing devices that weren't fully + initialized before. + +* Mon Apr 1 2013 Benjamin Marzinski 0.4.9-47 +- Add 0021-RHBZ-919119-respect-kernel-cmdline.patch + * keep the multipath.rules udev file from running and multipathd from + starting if nompath is on the kernel command line +- Add 0022-RH-multipathd-check-wwids.patch + * Whenever multipath runs configure, it will check the wwids, and + add any missing ones to the wwids file +- Add 0023-RH-multipath-wipe-wwid.patch + * multipath's -w command will remove a wwid from the wwids file +- Add 0024-RH-multipath-wipe-wwids.patch + * multipath's -W command will set reset the wwids file to just the current + devices +- Add 0025-UPBZ-916668_add_maj_min.patch +- Resolves: bz #919119 + +* Thu Mar 28 2013 Benjamin Marzinski 0.4.9-46 +- Add 0020-RHBZ-907360-static-pthread-init.patch + * statically initialize the uevent pthread structures + +* Sat Mar 2 2013 Benjamin Marzinski 0.4.9-45 +- Updated to latest upstrem 0.4.9 code: multipath-tools-130222 + (git commit id: 67b82ad6fe280caa1770025a6bb8110b633fa136) +- Refresh 0001-RH-dont_start_with_no_config.patch +- Modify 0002-RH-multipath.rules.patch +- Modify 0003-RH-Make-build-system-RH-Fedora-friendly.patch +- Refresh 0004-RH-multipathd-blacklist-all-by-default.patch +- Refresh 0005-RH-add-mpathconf.patch +- Refresh 0006-RH-add-find-multipaths.patch +- Add 0008-RH-revert-partition-changes.patch +- Rename 0008-RH-RHEL5-style-partitions.patch to + 0009-RH-RHEL5-style-partitions.patch +- Rename 0009-RH-dont-remove-map-on-enomem.patch to + 0010-RH-dont-remove-map-on-enomem.patch +- Rename 0010-RH-deprecate-uid-gid-mode.patch to + 0011-RH-deprecate-uid-gid-mode.patch +- Rename 0013-RH-kpartx-msg.patch to 0012-RH-kpartx-msg.patch +- Rename 0035-RHBZ-883981-cleanup-rpmdiff-issues.patch to + 0013-RHBZ-883981-cleanup-rpmdiff-issues.patch +- Rename 0039-RH-handle-other-sector-sizes.patch to + 0014-RH-handle-other-sector-sizes.patch +- Rename 0040-RH-fix-output-buffer.patch to 0015-RH-fix-output-buffer.patch +- Add 0016-RH-dont-print-ghost-messages.patch +- Add 0017-RH-fix-sigusr1.patch + * Actually this fixes a number of issues related to signals +- Rename 0018-RH-remove-config-dups.patch to 0018-RH-fix-factorize.patch + * just the part that isn't upstream +- Add 0019-RH-fix-sockets.patch + * makes abstract multipathd a cli sockets use the correct name. +- Set find_multipaths in the default config + +* Wed Feb 20 2013 Benjamin Marzinski 0.4.9-44 +- Add 0036-UP-fix-state-handling.patch + * handle transport-offline and quiesce sysfs state +- Add 0037-UP-fix-params-size.patch +- Add 0038-RH-fix-multipath.rules.patch + * make sure multipath's link priority gets increased +- Add 0039-RH-handle-other-sector-sizes.patch + * allow gpt partitions on 4k sector size block devices. +- Add 0040-RH-fix-output-buffer.patch + * fix multipath -ll for large configuration. + +* Wed Feb 13 2013 Fedora Release Engineering - 0.4.9-43 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild + +* Fri Dec 21 2012 Benjamin Marzinski 0.4.9-42 +- Add 0034-RHBZ-887737-check-for-null-key.patch +- Add 0035-RHBZ-883981-cleanup-rpmdiff-issues.patch + * Compile multipathd with full RELRO and PIE and install to /usr + +* Mon Dec 17 2012 Benjamin Marzinski 0.4.9-41 +- Add 0033-RH-dont-disable-libdm-failback-for-sync-case.patch + * make kpartx -s and multipath use libdm failback device creation, so + that they work in environments without udev + +* Fri Nov 30 2012 Benjamin Marzinski 0.4.9-40 +- Add 0032-RH-make-path-fd-readonly.patch + * revert change made when adding persistent reservations, so that path fds + are again opened O_RDONLY + +* Fri Nov 30 2012 Benjamin Marzinski 0.4.9-39 +- Add 0031-RHBZ-882060-fix-null-strncmp.patch + +* Fri Nov 30 2012 Benjamin Marzinski 0.4.9-38 +- Add 0026-RH-fix-mpathpersist-fns.patch +- Add 0027-RH-default-partition-delimiters.patch + * Only use the -p delimiter when the device name ends in a number +- Add 0028-RH-storagetek-config.patch +- Add 0029-RH-kpartx-retry.patch + * retry delete on busy loop devices +- Add 0030-RH-early-blacklist.patch + * multipath will now blacklist devices by device type and wwid in + store_pathinfo, so that it doesn't do a bunch of unnecessary work + on paths that it would only be removing later on. + +* Sat Nov 03 2012 Peter Rajnoha 0.4.9-37 +- Install multipathd.service for sysinit.target instead of multi-user.target. + +* Thu Nov 01 2012 Peter Rajnoha 0.4.9-36 +- Start multipathd.service systemd unit before LVM units. + +* Wed Oct 24 2012 Benjamin Marzinski 0.4.9-35 +- Add 0022-RHBZ-864368-disable-libdm-failback.patch + * make kpartx and multiapthd disable libdm failback device creation +- Add 0023-RHBZ-866291-update-documentation.patch +- Resolves: bz #864368, #866291 + +* Tue Oct 23 2012 Benjamin Marzinski 0.4.9-34 +- Add 0021-RH-fix-oom-adj.patch + * don't use OOM_ADJUST_MIN unless you're sure it's defined + +* Tue Oct 23 2012 Benjamin Marzinski 0.4.9-33 +- Modify 0016-RH-retain_hwhandler.patch + * Check the dm-multipath module version, and don't enable + retain_attached_hw_handler if the kernel doesn't support it +- Add 0019-RH-detect-prio.patch + * add detect_prio option, to make multipath check if the device + supports the ALUA prio, before defaulting to the configured prio +- Remove 0017-RH-netapp_config.patch +- Add 0020-RH-netapp-config.patch + * new netapp config that uses retain_attached_hw_handler and + detect_prio to autoconfigure ALUA and non-ALUA devices. + +* Tue Oct 2 2012 Benjamin Marzinski 0.4.9-32 +- Modified 0018-RH-remove-config-dups.patch + * Made modified config remove original only if the vendor/product + exactly match + +* Thu Sep 27 2012 Benjamin Marzinski 0.4.9-31 +- Add 0014-RH-dm_reassign.patch + * Fix reassign_maps option +- Add 0015-RH-selector_change.patch + * devices default to using service-time selector +- Add 0016-RH-retain_hwhandler.patch + * add retain_attached_hw_handler option, to let multipath keep an + already attached scsi device handler +- Add 0017-RH-netapp_config.patch +- Add 0018-RH-remove-config-dups.patch + * Clean up duplicates in the devices and blacklist sections + +* Wed Sep 05 2012 Václav Pavlín - 0.4.9-30 +- Scriptlets replaced with new systemd macros (#850088) + +* Tue Aug 21 2012 Benjamin Marzinski 0.4.9-29 +- Updated to latest upstrem 0.4.9 code: multipath-tools-120821.tgz + (git commit id: 050b24b33d3c60e29f7820d2fb75e84a9edde528) + * includes 0001-RH-remove_callout.patch, 0002-RH-add-wwids-file.patch, + 0003-RH-add-followover.patch, 0004-RH-fix-cciss-names.patch +- Add 0013-RH-kpartx-msg.patch +- Modify 0002-RH-multipath.rules.patch + * removed socket call from rules file + +* Wed Jul 18 2012 Fedora Release Engineering - 0.4.9-28 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild + +* Thu Jun 28 2012 Benjamin Marzinski 0.4.9-27 +- Updated to latest upstream 0.4.9 code : multipath-tools-120613.tgz + (git commit id: cb0f7127ba90ab5e8e71fc534a0a16cdbe96a88f) +- Add 0001-RH-remove_callout.patch + * multipath no longer uses the getuid callout. It now gets the + wwid from the udev database or the environment variables +- Add 0004-RH-fix-cciss-names.patch + * convert cciss device names from cciss/cXdY to sysfs style cciss!cXdY +- Split 0009-RH-add-find-multipaths.patch into 0002-RH-add-wwids-file.patch + and 0010-RH-add-find-multipaths.patch +- Add 0016-RH-change-configs.patch + * default fast_io_fail to 5 and don't set the path selector in the + builtin configs. +Resolves: bz #831978 + + +* Thu May 17 2012 Benjamin Marzinski 0.4.9-26 +- Add 0025-RHBZ-822714-update-nodes.patch +- Resolves: bz #822714 + +* Mon Apr 30 2012 Benjamin Marzinski 0.4.9-25 +- Modify 0024-RH-libudev-monitor.patch +- Resolves: bz #805493 + +* Mon Apr 30 2012 Benjamin Marzinski 0.4.9-24 +- Add requirements on libudev to spec file +- Resolves: bz #805493 + +* Mon Apr 30 2012 Benjamin Marzinski 0.4.9-23 +- Add 0024-RH-libudev-monitor.patch + +* Fri Feb 10 2012 Benjamin Marzinski 0.4.9-22 +- Add 0012-RH-update-on-show-topology.patch +- Add 0013-RH-manpage-update.patch +- Add 0014-RH-RHEL5-style-partitions.patch +- Add 0015-RH-add-followover.patch +- Add 0016-RH-dont-remove-map-on-enomem.patch +- Add 0017-RH-fix-shutdown-crash.patch +- Add 0018-RH-warn-on-bad-dev-loss-tmo.patch +- Add 0019-RH-deprecate-uid-gid-mode.patch +- Add 0020-RH-dont-remove-map-twice.patch +- Add 0021-RH-validate-guid-partitions.patch +- Add 0022-RH-adjust-messages.patch +- Add 0023-RH-manpage-update.patch + +* Tue Jan 24 2012 Benjamin Marzinski 0.4.9-21 +- Updated to latest upstream 0.4.9 code : multipath-tools-120123.tgz + (git commit id: 63704387009443bdb37d9deaaafa9ab121d45bfb) +- Add 0001-RH-fix-async-tur.patch +- Add 0002-RH-dont_start_with_no_config.patch +- Add 0003-RH-multipath.rules.patch +- Add 0004-RH-update-init-script.patch +- Add 0005-RH-cciss_id.patch +- Add 0006-RH-Make-build-system-RH-Fedora-friendly.patch +- Add 0007-RH-multipathd-blacklist-all-by-default.patch +- Add 0008-RH-add-mpathconf.patch +- Add 0009-RH-add-find-multipaths.patch +- Add 0010-RH-check-if-multipath-owns-path.patch +- Add 0011-RH-add-hp_tur-checker.patch + +* Fri Jan 13 2012 Fedora Release Engineering - 0.4.9-20 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild + +* Tue Sep 20 2011 Benjamin Marzinski -0.4.9-19 +- Modify 0103-add-disable-sync-option.patch +- Add 0104-RHBZ-737989-systemd-unit-fix.patch + * systemd will only start multipathd if /etc/multipath.conf exists +- Add 0105-fix-oom-adj.patch + * first try setting oom_score_adj + +* Mon Aug 15 2011 Kalev Lember - 0.4.9-18 +- Rebuilt for rpm bug #728707 + +* Tue Jul 19 2011 Benjamin Marzinski -0.4.9-17 +- Add 0103-add-disable-sync-option.patch + * add a -n (nosync) option to multipath. This disables synchronous + file creation with udev. + +* Fri Jul 15 2011 Benjamin Marzinski -0.4.9-16 +- Modify 0012-RH-udev-sync-support.patch +- Modify 0021-RHBZ-548874-add-find-multipaths.patch +- Modify 0022-RHBZ-557845-RHEL5-style-partitions.patch +- Add 0025-RHBZ-508827-update-multipathd-manpage.patch through + 0101-RHBZ-631009-disable-udev-disk-rules-on-reload.patch + * sync with current state of RHEL6. Next release should include a updated + source tarball with most of these fixes rolled in. +- Add 0102-RHBZ-690828-systemd-unit-file.patch + * Add Jóhann B. Guðmundsson's unit file for systemd. + * Add sub-package sysvinit for SysV init script. +- Resolves: bz #690828 + +* Tue Feb 08 2011 Fedora Release Engineering - 0.4.9-15 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild + +* Tue Feb 16 2010 Benjamin Marzinski -0.4.9-14 +- Modify 0021-RHBZ-548874-add-find-multipaths.patch + * fix bug where mpathconf wouldn't create a multpath.conf file unless one + already existed. + +* Tue Feb 16 2010 Benjamin Marzinski -0.4.9-13 +- Replace 0012-RH-explicitly-disable-dm-udev-sync-support-in-kpartx.patch + with 0012-RH-udev-sync-support.patch + * Add udev sync support to kpartx and multipath. In kpartx it is disabled + unless you use the -s option. +- Refresh 0013-RH-add-weighted_prio-prioritizer.patch +- Refresh 0021-RHBZ-548874-add-find-multipaths.patch +- Modify 0022-RHBZ-557845-RHEL5-style-partitions.patch + * kpartx now creates a 2 sector large device for dos extended + partitions, just like the kernel does on the regular block devices. +- Add 0023-RHBZ-557810-emc-invista-config.patch +- Add 0024-RHBZ-565933-checker-timeout.patch + * Multipath has a new option checker_timeout. If this is not set, + all path checker functions with explicit timeouts use + /sys/block/sd/device/timeout. If this is set, they use it instead. + +* Fri Jan 22 2010 Benjamin Marzinski -0.4.9-12 +- Refresh 0001-RH-queue-without-daemon.patch +- Refresh 0002-RH-path-checker.patch +- Modify 0010-RH-multipath-rules-udev-changes.patch + * Fix udev rules to use DM_SBIN_PATH when calling kpartx + * install udev rules to /lib/udev/rules.d instead of /etc/udev/rules.d +- Modify 0014-RH-add-hp_tur-checker.patch +- Add 0003-for-upstream-default-configs.patch +- Add 0016-RHBZ-554561-fix-init-error-msg.patch +- Add 0017-RHBZ-554592-man-page-note.patch +- Add 0018-RHBZ-554596-SUN-6540-config.patch +- Add 0019-RHBZ-554598-fix-multipath-locking.patch +- Add 0020-RHBZ-554605-fix-manual-failover.patch +- Add 0021-RHBZ-548874-add-find-multipaths.patch + * Added find_multipaths multipath.conf option + * Added /sbin/mpathconf for simple editting of multipath.conf +- Add 0022-RHBZ-557845-RHEL5-style-partitions.patch + * Make kpartx deal with logical partitions like it did in RHEL5. + Don't create a dm-device for the extended partition itself. + Create the logical partitions on top of the dm-device for the whole disk. + +* Mon Nov 16 2009 Benjamin Marzinski -0.4.9-11 +- Add 0002-for-upstream-add-tmo-config-options.patch + * Add fail_io_fail_tmo and dev_loss_tmo multipath.conf options +- Add 0013-RH-add-weighted_prio-prioritizer.patch +- Add 0014-RH-add-hp_tur-checker.patch +- Add 0015-RH-add-multipathd-count-paths-cmd.patch +- rename multipath.conf.redhat to multipath.conf, and remove the default + blacklist. + +* Tue Oct 27 2009 Fabio M. Di Nitto - 0.4.9-10 +- Updated to latest upstream 0.4.9 code : multipath-tools-091027.tar.gz + (git commit id: a946bd4e2a529e5fba9c9547d03d3f91806618a3) +- Drop unrequired for-upstream patches. +- BuildRequires and Requires new device-mapper version for udev sync support. + +* Tue Oct 20 2009 Fabio M. Di Nitto - 0.4.9-9 +- 0012-RH-explicitly-disable-dm-udev-sync-support-in-kpartx.patch + +* Mon Oct 19 2009 Fabio M. Di Nitto - 0.4.9-8 +- Split patches in "for-upstream" and "RH" series. +- Replace 0011-RH-multipathd-blacklist-all-by-default.patch with + version from Benjamin Marzinski. +- Update udev rules 0010-RH-multipath-rules-udev-changes.patch. +- rpmlint cleanup: + * Drop useless-provides kpartx. + * Cleanup tab vs spaces usage. + * Summary not capitalized. + * Missing docs in libs package. + * Fix init script LSB headers. +- Drop README* files from doc sections (they are empty). + +* Thu Oct 15 2009 Fabio M. Di Nitto - 0.4.9-7 +- Add patch 0010-RH-Set-friendly-defaults.patch: + * set rcdir to fedora default. + * do not install kpartx udev bits. + * install redhat init script. + * Cleanup spec file install target. +- Add patch 0011-RH-multipathd-blacklist-all-by-default.patch: + * Fix BZ#528059 + * Stop installing default config in /etc and move it to the doc dir. + +* Tue Oct 13 2009 Fabio M. Di Nitto - 0.4.9-6 +- Updated to latest upstream 0.4.9 code : multipath-tools-091013.tar.gz + (git commit id: aa0a885e1f19359c41b63151bfcface38ccca176) +- Drop, now upstream, patches: + * fix_missed_uevs.patch. + * log_all_messages.patch. + * uninstall.patch. + * select_lib.patch. + * directio_message_cleanup.patch. + * stop_warnings.patch. +- Drop redhatification.patch in favour of spec file hacks. +- Drop mpath_wait.patch: no longer required. +- Merge multipath_rules.patch and udev_change.patch. +- Rename all patches based on source. +- Add patch 0009-RH-fix-hp-sw-hardware-table-entries.patch to fix + default entry for hp_sw and match current kernel. +- Add multipath.conf.redhat as source instead of patch. +- spec file: + * divide runtime and build/setup bits. + * update BuildRoot. + * update install section to apply all the little hacks here and there, + in favour of patches against upstream. + * move ldconfig invokation to libs package where it belong. + * fix libs package directory ownership and files. + +* Thu Aug 20 2009 Benjamin Marzinski - 0.4.9-5 +- Fixed problem where maps were being added and then removed. +- Changed the udev rules to fix some issues. + +* Thu Jul 30 2009 Benjamin Marzinski - 0.4.9-4 +- Fixed build issue on i686 machines. + +* Wed Jul 29 2009 Benjamin Marzinski - 0.4.9-3 +- Updated to latest upstream 0.4.9 code : multipath-tools-090729.tgz + (git commit id: d678c139719d5631194b50e49f16ca97162ecd0f) +- moved multipath bindings file from /var/lib/multipath to /etc/multipath +- Fixed 354961, 432520 + +* Fri Jul 24 2009 Fedora Release Engineering - 0.4.9-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild + +* Wed May 6 2009 Mike Snitzer - 0.4.9-1 +- Updated to latest upstream 0.4.9 code: multipath-tools-090429.tgz + (git commit id: 7395bcda3a218df2eab1617df54628af0dc3456e) +- split the multipath libs out to a device-mapper-multipath-libs package +- if appropriate, install multipath libs in /lib64 and /lib64/multipath + +* Tue Apr 7 2009 Milan Broz - 0.4.8-10 +- Fix insecure permissions on multipathd.sock (CVE-2009-0115) + +* Fri Mar 6 2009 Milan Broz - 0.4.8-9 +- Fix kpartx extended partition handling (475283) + +* Tue Feb 24 2009 Fedora Release Engineering - 0.4.8-8 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild + +* Fri Sep 26 2008 Benjamin Marzinski 0.4.8-7 +- Since libaio is now in /lib, not /usr/lib, multipath no longer needs to + statically link against it. Fixed an error with binding file and WWIDs + that include spaces. Cleaned up the messages from the directio checker + function. Fixed the udev rules. Fixed a regression in multipath.conf + parsing +- Fixed 457530, 457589 + +* Wed Aug 20 2008 Benjamin Marzinski 0.4.8-6 +- Updated to latest upstream 0.4.8 code: multipath-tools-080804.tgz + (git commit id: eb87cbd0df8adf61d1c74c025f7326d833350f78) +- fixed 451817, 456397 (scsi_id_change.patch), 457530 (config_space_fix.patch) + 457589 (static_libaio.patch) + +* Fri Jun 13 2008 Alasdair Kergon - 0.4.8-5 +- Rebuild (rogue vendor tag). (451292) + +* Mon May 19 2008 Benjamin Marzinksi 0.4.8-4 +- Fixed Makefile issues. + +* Mon May 19 2008 Benjamin Marzinksi 0.4.8-3 +- Fixed ownership build error. + +* Mon May 19 2008 Benjamin Marzinksi 0.4.8-2 +- Forgot to commit some patches. + +* Mon May 19 2008 Benjamin Marzinski 0.4.8-1 +- Updated to latest Upstream 0.4.8 code: multipath-tools-080519.tgz + (git commit id: 42704728855376d2f7da2de1967d7bc71bc54a2f) + +* Tue May 06 2008 Alasdair Kergon - 0.4.7-15 +- Remove unnecessary multipath & kpartx static binaries. (bz 234928) + +* Fri Feb 29 2008 Tom "spot" Callaway - 0.4.7-14 +- fix sparc64 +- fix license tag + +* Tue Feb 19 2008 Fedora Release Engineering - 0.4.7-13 +- Autorebuild for GCC 4.3 + +* Wed Nov 14 2007 Benjamin Marzinski - 0.4.7-12 +- Fixed the dist tag so building will work properly. + +* Mon Feb 05 2007 Alasdair Kergon - 0.4.7-11.fc7 +- Add build dependency on new device-mapper-devel package. +- Add dependency on device-mapper. + +* Wed Jan 31 2007 Benjamin Marzinksi - 0.4.7-10.fc7 +- Update BuildRoot and PreReq lines. + +* Mon Jan 15 2007 Benjamin Marzinksi - 0.4.7-9.fc7 +- Fixed spec file. + +* Mon Jan 15 2007 Benjamin Marzinski - 0.4.7-8.fc7 +- Update to latest code (t0_4_7_head2) + +* Wed Dec 13 2006 Benjamin Marzinski - 0.4.7-7.fc7 +- Update to latest code (t0_4_7_head1) + +* Thu Sep 7 2006 Peter Jones - 0.4.7-5 +- Fix kpartx to handle with drives >2TB correctly. + +* Thu Aug 31 2006 Peter Jones - 0.4.7-4.1 +- Split kpartx out into its own package so dmraid can use it without + installing multipathd +- Fix a segfault in kpartx + +* Mon Jul 17 2006 Benjamin Marzinski 0.4.7-4.0 +- Updated to latest source. Fixes bug in default multipath.conf + +* Wed Jul 12 2006 Benjamin Marzinski 0.4.7-3.1 +- Added ncurses-devel to BuildRequires + +* Wed Jul 12 2006 Benjamin Marzinski 0.4.7-3.0 +- Updated to latest source. deals with change in libsysfs API + +* Wed Jul 12 2006 Jesse Keating - 0.4.7-2.2.1 +- rebuild + +* Mon Jul 10 2006 Benjamin Marzinski 0.4.7-2.2 +- fix tagging issue. + +* Mon Jul 10 2006 Benjamin Marzinski 0.4.7-2.1 +- changed BuildRequires from sysfsutils-devel to libsysfs-devel + +* Wed Jun 28 2006 Benjamin Marzinski 0.4.7-2.0 +- Updated to latest upstream source, fixes kpartx udev rule issue + +* Tue Jun 06 2006 Benjamin Marzinski 0.4.7-1.0 +- Updated to Christophe's latest source + +* Mon May 22 2006 Alasdair Kergon - 0.4.5-16.0 +- Newer upstream source (t0_4_5_post59). + +* Mon May 22 2006 Alasdair Kergon - 0.4.5-12.3 +- BuildRequires: libsepol-devel, readline-devel + +* Mon Feb 27 2006 Benjamin Marzinski 0.4.5-12.2 +- Prereq: chkconfig + +* Mon Feb 20 2006 Karsten Hopp 0.4.5-12.1 +- BuildRequires: libselinux-devel + +* Fri Feb 10 2006 Jesse Keating - 0.4.5-12.0.1 +- bump again for double-long bug on ppc(64) + +* Tue Feb 07 2006 Benjamin Marzinski -0.4.5-12.0 +- Updated to latest upstream source (t0_4_5_post56) + +* Tue Feb 07 2006 Jesse Keating - 0.4.5-9.1.1 +- rebuilt for new gcc4.1 snapshot and glibc changes + +* Mon Dec 19 2005 Benjamin Marzinski - 0.4.5-9.1 +- added patch for fedora changes + +* Fri Dec 16 2005 Benjamin Marzinski - 0.4.5-9.0 +- Updated to latest upstream source (t)_4_5_post52) + +* Fri Dec 09 2005 Jesse Keating +- rebuilt + +* Sun Dec 4 2005 Peter Jones - 0.4.4-2.6 +- rebuild for newer libs + +* Tue Nov 15 2005 Peter Jones - 0.4.4-2.5 +- unsplit kpartx. parted knows how to do this now, so we don't + need this in a separate package. + +* Tue Nov 15 2005 Peter Jones - 0.4.4-2.4 +- split kpartx out into its own package + +* Fri May 06 2005 Bill Nottingham - 0.4.4-2.3 +- Fix last fix. + +* Thu May 05 2005 Alasdair Kergon - 0.4.4-2.2 +- Fix last fix. + +* Wed May 04 2005 Alasdair Kergon - 0.4.4-2.1 +- By default, disable the multipathd service. + +* Tue Apr 19 2005 Alasdair Kergon - 0.4.4-2.0 +- Fix core dump from last build. + +* Tue Apr 19 2005 Alasdair Kergon - 0.4.4-1.0 +- Move cache file into /var/cache/multipath. + +* Fri Apr 08 2005 Alasdair Kergon - 0.4.4-0.pre8.1 +- Remove pp_balance_units. + +* Mon Apr 04 2005 Alasdair Kergon - 0.4.4-0.pre8.0 +- Incorporate numerous upstream fixes. +- Update init script to distribution standards. + +* Tue Mar 01 2005 Alasdair Kergon - 0.4.2-1.0 +- Initial import based on Christophe Varoqui's spec file.