Blame SOURCES/multipath.conf

671555
# This is a basic configuration file with some examples, for device mapper
671555
# multipath.
671555
#
671555
# For a complete list of the default configuration values, run either
671555
# multipath -t
671555
# or
671555
# multipathd show config
671555
#
671555
# For a list of configuration options with descriptions, see the multipath.conf
671555
# man page
671555
671555
## By default, devices with vendor = "IBM" and product = "S/390.*" are
671555
## blacklisted. To enable mulitpathing on these devies, uncomment the
671555
## following lines.
671555
#blacklist_exceptions {
671555
#	device {
671555
#		vendor	"IBM"
671555
#		product	"S/390.*"
671555
#	}
671555
#}
671555
671555
## Use user friendly names, instead of using WWIDs as names.
671555
defaults {
671555
	user_friendly_names yes
671555
	find_multipaths yes
671555
}
671555
##
671555
## Here is an example of how to configure some standard options.
671555
##
671555
#
671555
#defaults {
671555
#	udev_dir		/dev
671555
#	polling_interval 	10
671555
#	selector		"round-robin 0"
671555
#	path_grouping_policy	multibus
1eb31d
#	uid_attribute		ID_SERIAL
671555
#	prio			alua
671555
#	path_checker		readsector0
671555
#	rr_min_io		100
671555
#	max_fds			8192
671555
#	rr_weight		priorities
671555
#	failback		immediate
671555
#	no_path_retry		fail
671555
#	user_friendly_names	yes
671555
#}
671555
##
671555
## The wwid line in the following blacklist section is shown as an example
671555
## of how to blacklist devices by wwid.  The 2 devnode lines are the
671555
## compiled in default blacklist. If you want to blacklist entire types
671555
## of devices, such as all scsi devices, you should use a devnode line.
671555
## However, if you want to blacklist specific devices, you should use
671555
## a wwid line.  Since there is no guarantee that a specific device will
671555
## not change names on reboot (from /dev/sda to /dev/sdb for example)
671555
## devnode lines are not recommended for blacklisting specific devices.
671555
##
671555
#blacklist {
671555
#       wwid 26353900f02796769
671555
#	devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
671555
#	devnode "^hd[a-z]"
671555
#}
671555
#multipaths {
671555
#	multipath {
671555
#		wwid			3600508b4000156d700012000000b0000
671555
#		alias			yellow
671555
#		path_grouping_policy	multibus
671555
#		path_checker		readsector0
671555
#		path_selector		"round-robin 0"
671555
#		failback		manual
671555
#		rr_weight		priorities
671555
#		no_path_retry		5
671555
#	}
671555
#	multipath {
671555
#		wwid			1DEC_____321816758474
671555
#		alias			red
671555
#	}
671555
#}
671555
#devices {
671555
#	device {
671555
#		vendor			"COMPAQ  "
671555
#		product			"HSV110 (C)COMPAQ"
671555
#		path_grouping_policy	multibus
671555
#		path_checker		readsector0
671555
#		path_selector		"round-robin 0"
671555
#		hardware_handler	"0"
671555
#		failback		15
671555
#		rr_weight		priorities
671555
#		no_path_retry		queue
671555
#	}
671555
#	device {
671555
#		vendor			"COMPAQ  "
671555
#		product			"MSA1000         "
671555
#		path_grouping_policy	multibus
671555
#	}
671555
#}