% containers.conf 5 Container engine configuration file
containers.conf - The container engine configuration file specifies default configuration options and command-line flags for container engines.
Container engines like Podman & Buildah read containers.conf file, if it exists and modify the defaults for running containers on the host. containers.conf uses a TOML format that can be easily modified and versioned.
Container engines read the /usr/share/containers/containers.conf and /etc/containers/containers.conf, and /etc/containers/containers.conf.d/.conf files if they exist. When running in rootless mode, they also read $HOME/.config/containers/containers.conf and $HOME/.config/containers/containers.conf.d/.conf files.
Fields specified in containers conf override the default options, as well as options in previously read containers.conf files.
Config files in the .d
directories, are added in alpha numeric sorted order and must end in .conf
.
Not all options are supported in all container engines.
Note container engines also use other configuration files for configuring the environment.
storage.conf
for configuration of container and images storage.registries.conf
for definition of container registires to search while pulling.
container images.policy.conf
for controlling which images can be pulled to the system.The TOML format is used as the encoding of the configuration file. Every option is nested under its table. No bare options are used. The format of TOML can be simplified to:
[table1] option = value [table2] option = value [table3] option = value [table3.subtable1] option = value
The containers table contains settings to configure and manage the OCI runtime.
annotations = [] List of annotations. Specified as "key=value" pairs to be added to all containers.
Example: "run.oci.keep_original_groups=1"
apparmor_profile="container-default"
Used to change the name of the default AppArmor profile of container engines. The default profile name is "container-default".
base_hosts_file=""
The hosts entries from the base hosts file are added to the containers hosts file. This must be either an absolute path or as special values "image" which uses the hosts file from the container image or "none" which means no base hosts file is used. The default is "" which will use /etc/hosts.
cgroups="enabled"
Determines whether the container will create CGroups.
Options are:
enabled
Enable cgroup support within container
disabled
Disable cgroup support, will inherit cgroups from parent
no-conmon
Do not create a cgroup dedicated to conmon.
cgroupns="private"
Default way to to create a cgroup namespace for the container.
Options are:
private
Create private Cgroup Namespace for the container.
host
Share host Cgroup Namespace with the container.
default_capabilities=[]
List of default capabilities for containers.
The default list is:
default_capabilities = [ "CHOWN", "DAC_OVERRIDE", "FOWNER", "FSETID", "KILL", "NET_BIND_SERVICE", "SETFCAP", "SETGID", "SETPCAP", "SETUID", ]
Note, by default container engines using containers.conf, run with less capabilities than Docker. Docker runs additionally with "AUDIT_WRITE", "MKNOD", "NET_RAW", "CHROOT". If you need to add one of these capabilities for a particular container, you can use the --cap-add option or edit your system's containers.conf.
default_sysctls=[]
A list of sysctls to be set in containers by default, specified as "name=value".
Example:"net.ipv4.ping_group_range=0 1000".
default_ulimits=[]
A list of ulimits to be set in containers by default, specified as "name=soft-limit:hard-limit".
Example: "nofile=1024:2048".
devices=[]
List of devices. Specified as 'device-on-host:device-on-container:permissions'.
Example: "/dev/sdc:/dev/xvdc:rwm".
dns_options=[]
List of default DNS options to be added to /etc/resolv.conf inside of the container.
dns_searches=[]
List of default DNS search domains to be added to /etc/resolv.conf inside of the container.
dns_servers=[]
A list of dns servers to override the DNS configuration passed to the container. The special value “none” can be specified to disable creation of /etc/resolv.conf in the container.
env=["PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin", "TERM=xterm"]
Environment variable list for the container process, used for passing environment variables to the container.
env_host=false
Pass all host environment variables into the container.
host_containers_internal_ip=""
Set the ip for the host.containers.internal entry in the containers /etc/hosts file. This can be set to "none" to disable adding this entry. By default it will automatically choose the host ip.
NOTE: When using podman machine this entry will never be added to the containers hosts file instead the gvproxy dns resolver will resolve this hostname. Therefore it is not possible to disable the entry in this case.
http_proxy=true
Default proxy environment variables will be passed into the container.
The environment variables passed in include:
http_proxy
, https_proxy
, ftp_proxy
, no_proxy
, and the upper case
versions of these. The no_proxy
option is needed when host system uses a proxy
but container should not use proxy. Proxy environment variables specified for
the container in any other way will override the values passed from the host.
init=false
Run an init inside the container that forwards signals and reaps processes.
init_path="/usr/libexec/podman/catatonit"
Path to the container-init binary, which forwards signals and reaps processes
within containers. Note that the container-init binary will only be used when
the --init
for podman-create and podman-run is set.
ipcns="shareable"
Default way to to create a IPC namespace for the container.
Options are:
host
Share host IPC Namespace with the container.
none
Create shareable IPC Namespace for the container without a private /dev/shm.
private
Create private IPC Namespace for the container, other containers are not allowed to share it.
shareable
Create shareable IPC Namespace for the container.
keyring=true
Indicates whether the container engines create a kernel keyring for use within the container.
label=true
Indicates whether the container engine uses MAC(SELinux) container separation via labeling. This option is ignored on disabled systems.
log_driver=""
Logging driver for the container. Currently available options are k8s-file, journald, none and passthrough, with json-file aliased to k8s-file for scripting compatibility. The journald driver is used by default if the systemd journal is readable and writable. Otherwise, the k8s-file driver is used.
log_size_max=-1
Maximum size allowed for the container's log file. Negative numbers indicate that no size limit is imposed. If it is positive, it must be >= 8192 to match/exceed conmon's read buffer. The file is truncated and re-opened so the limit is never exceeded.
log_tag=""
Default format tag for container log messages. This is useful for creating a specific tag for container log messages. Container log messages default to using the truncated container ID as a tag.
netns="private"
Default way to to create a NET namespace for the container.
Options are:
private
Create private NET Namespace for the container.
host
Share host NET Namespace with the container.
none
Containers do not use the network.
no_hosts=false
Create /etc/hosts for the container. By default, container engines manage /etc/hosts, automatically adding the container's own IP address.
pidns="private"
Default way to to create a PID namespace for the container.
Options are:
private
Create private PID Namespace for the container.
host
Share host PID Namespace with the container.
pids_limit=1024
Maximum number of processes allowed in a container. 0 indicates that no limit is imposed.
prepare_volume_on_create=false
Copy the content from the underlying image into the newly created volume when the container is created instead of when it is started. If false
, the container engine will not copy the content until the container is started. Setting it to true
may have negative performance implications.
read_only=true|false
Run all containers with root file system mounted read-only. Set to false by default.
seccomp_profile="/usr/share/containers/seccomp.json"
Path to the seccomp.json profile which is used as the default seccomp profile for the runtime.
shm_size="65536k"
Size of /dev/shm
. The format is <number><unit>
. number
must be greater
than 0
.
Unit is optional and can be:
b
(bytes), k
(kilobytes), m
(megabytes), or g
(gigabytes).
If you omit the unit, the system uses bytes. If you omit the size entirely,
the system uses 65536k
.
tz=""
Set timezone in container. Takes IANA timezones as well as local
, which sets the timezone in the container to match the host machine.
If not set, then containers will run with the time zone specified in the image.
Examples:
tz="local"
tz="America/New_York"
umask="0022"
Sets umask inside the container.
userns="host"
Default way to to create a USER namespace for the container.
Options are:
private
Create private USER Namespace for the container.
host
Share host USER Namespace with the container.
utsns="private"
Default way to to create a UTS namespace for the container.
Options are:
private
Create private UTS Namespace for the container.
host
Share host UTS Namespace with the container.
volumes=[]
List of volumes. Specified as "directory-on-host:directory-in-container:options".
Example: "/db:/var/lib/db:ro".
The network
table contains settings pertaining to the management of CNI
plugins.
network_backend=""
Network backend determines what network driver will be used to set up and tear down container networks. Valid values are "cni" and "netavark". The default value is empty which means that it will automatically choose CNI or netavark. If there are already containers/images or CNI networks preset it will choose CNI.
Before changing this value all containers must be stopped otherwise it is likely that iptables rules and network interfaces might leak on the host. A reboot will fix this.
cni_plugin_dirs=[]
List of paths to directories where CNI plugin binaries are located.
The default list is:
cni_plugin_dirs = [ "/usr/local/libexec/cni", "/usr/libexec/cni", "/usr/local/lib/cni", "/usr/lib/cni", "/opt/cni/bin", ]
default_network="podman"
The network name of the default network to attach pods to.
default_subnet="10.88.0.0/16"
The subnet to use for the default network (named above in default_network). If the default network does not exist, it will be automatically created the first time a tool is run using this subnet.
default_subnet_pools=[]
DefaultSubnetPools is a list of subnets and size which are used to allocate subnets automatically for podman network create. It will iterate through the list and will pick the first free subnet with the given size. This is only used for ipv4 subnets, ipv6 subnets are always assigned randomly.
The default list is (10.89.0.0-10.255.255.0/24):
default_subnet_pools = [ {"base" = "10.89.0.0/16", "size" = 24}, {"base" = "10.90.0.0/15", "size" = 24}, {"base" = "10.92.0.0/14", "size" = 24}, {"base" = "10.96.0.0/11", "size" = 24}, {"base" = "10.128.0.0/9", "size" = 24}, ]
network_config_dir="/etc/cni/net.d/"
Path to the directory where network configuration files are located. For the CNI backend the default is "/etc/cni/net.d" as root and "$HOME/.config/cni/net.d" as rootless. For the netavark backend "/etc/containers/networks" is used as root and "$graphroot/networks" as rootless.
dns_bind_port=53
Port to use for dns forwarding daemon with netavark in rootful bridge mode and dns enabled. Using an alternate port might be useful if other dns services should run on the machine.
The engine
table contains configuration options used to set up container engines such as Podman and Buildah.
active_service=""
Name of destination for accessing the Podman service. See SERVICE DESTINATION TABLE below.
cgroup_manager="systemd"
The cgroup management implementation used for the runtime. Supports cgroupfs
and systemd
.
conmon_env_vars=[]
Environment variables to pass into Conmon.
conmon_path=[]
Paths to search for the conmon container manager binary. If the paths are
empty or no valid path was found, then the $PATH
environment variable will be
used as the fallback.
The default list is:
conmon_path=[ "/usr/libexec/podman/conmon", "/usr/local/libexec/podman/conmon", "/usr/local/lib/podman/conmon", "/usr/bin/conmon", "/usr/sbin/conmon", "/usr/local/bin/conmon", "/usr/local/sbin/conmon", "/run/current-system/sw/bin/conmon", ]
detach_keys="ctrl-p,ctrl-q"
Keys sequence used for detaching a container.
Specify the keys sequence used to detach a container.
Format is a single character [a-Z]
or a comma separated sequence of
ctrl-<value>
, where <value>
is one of:
a-z
, @
, ^
, [
, \
, ]
, ^
or _
enable_port_reservation=true
Determines whether the engine will reserve ports on the host when they are forwarded to containers. When enabled, when ports are forwarded to containers, they are held open by conmon as long as the container is running, ensuring that they cannot be reused by other programs on the host. However, this can cause significant memory usage if a container has many ports forwarded to it. Disabling this can save memory.
env=[]
Environment variables to be used when running the container engine (e.g., Podman, Buildah). For example "http_proxy=internal.proxy.company.com". Note these environment variables will not be used within the container. Set the env section under [containers] table, if you want to set environment variables for the container.
events_logfile_path=""
Define where event logs will be stored, when events_logger is "file".
events_logfile_max_size="1m"
Sets the maximum size for events_logfile_path.
The unit can be b (bytes), k (kilobytes), m (megabytes) or g (gigabytes).
The format for the size is <number><unit>
, e.g., 1b
or 3g
.
If no unit is included then the size will be in bytes.
When the limit is exceeded, the logfile will be rotated and the old one will be deleted.
If the maximumn size is set to 0, then no limit will be applied,
and the logfile will not be rotated.
events_logger="journald"
The default method to use when logging events.
The default method is different based on the platform that Podman is being run upon. To determine the current value, use this command:
podman info --format {{.Host.EventLogger}
Valid values are: file
, journald
, and none
.
events_container_create_inspect_data=true|false
Creates a more verbose container-create event which includes a JSON payload with detailed information about the container. Set to false by default.
helper_binaries_dir=["/usr/libexec/podman", ...]
A is a list of directories which are used to search for helper binaries.
The default paths on Linux are:
- /usr/local/libexec/podman
- /usr/local/lib/podman
- /usr/libexec/podman
- /usr/lib/podman
The default paths on macOS are:
- /usr/local/opt/podman/libexec
- /opt/homebrew/bin
- /opt/homebrew/opt/podman/libexec
- /usr/local/bin
- /usr/local/libexec/podman
- /usr/local/lib/podman
- /usr/libexec/podman
- /usr/lib/podman
The default path on Windows is:
- C:\Program Files\RedHat\Podman
hooks_dir=["/etc/containers/oci/hooks.d", ...]
Path to the OCI hooks directories for automatically executed hooks.
image_default_format="oci"|"v2s2"|"v2s1"
Manifest Type (oci, v2s2, or v2s1) to use when pulling, pushing, building container images. By default images pulled and pushed match the format of the source image. Building/committing defaults to OCI. Note: image_build_format is deprecated.
image_default_transport="docker://"
Default transport method for pulling and pushing images.
image_parallel_copies=0
Maximum number of image layers to be copied (pulled/pushed) simultaneously. Not setting this field will fall back to containers/image defaults. (6)
image_volume_mode="bind"
Tells container engines how to handle the builtin image volumes.
infra_command="/pause"
Infra (pause) container image command for pod infra containers. When running a
pod, we start a /pause
process in a container to hold open the namespaces
associated with the pod. This container does nothing other then sleep,
reserving the pods resources for the lifetime of the pod.
infra_image=""
Infra (pause) container image for pod infra containers. When running a
pod, we start a pause
process in a container to hold open the namespaces
associated with the pod. This container does nothing other then sleep,
reserving the pods resources for the lifetime of the pod. By default container
engines run a builtin container using the pause executable. If you want override
specify an image to pull.
lock_type="shm"
Specify the locking mechanism to use; valid values are "shm" and "file". Change the default only if you are sure of what you are doing, in general "file" is useful only on platforms where cgo is not available for using the faster "shm" lock type. You may need to run "podman system renumber" after you change the lock type.
multi_image_archive=false
Allows for creating archives (e.g., tarballs) with more than one image. Some container engines, such as Podman, interpret additional arguments as tags for one image and hence do not store more than one image. The default behavior can be altered with this option.
namespace=""
Default engine namespace. If the engine is joined to a namespace, it will see only containers and pods that were created in the same namespace, and will create new containers and pods in that namespace. The default namespace is "", which corresponds to no namespace. When no namespace is set, all containers and pods are visible.
network_cmd_path=""
Path to the slirp4netns binary.
network_cmd_options=[]
Default options to pass to the slirp4netns binary.
Valid options values are:
10.0.2.2
). Default is false.65520
).10.0.2.0/24
).outbound_addr6
).10.0.2.100
. If your application requires the real source IP address, e.g. web server logs, use the slirp4netns port handler. The rootlesskit port handler is also used for rootless containers when connected to user-defined networks.no_pivot_root=false
Whether to use chroot instead of pivot_root in the runtime.
num_locks=2048
Number of locks available for containers and pods. Each created container or
pod consumes one lock. The default number available is 2048. If this is
changed, a lock renumbering must be performed, using the
podman system renumber
command.
pod_exit_policy="continue"
Set the exit policy of the pod when the last container exits. Supported policies are:
Exit Policy | Description |
---|---|
continue | The pod continues running when the last container exits. Used by default. |
stop | The pod is stopped when the last container exits. Used in play kube . |
pull_policy="always"|"missing"|"never"
Pull image before running or creating a container. The default is missing.
remote = false
Indicates whether the application should be running in remote mode. This flag modifies the
--remote option on container engines. Setting the flag to true will default podman --remote=true
for access to the remote Podman service.
runtime=""
Default OCI specific runtime in runtimes that will be used by default. Must refer to a member of the runtimes table. Default runtime will be searched for on the system using the priority: "crun", "runc", "kata".
runtime_supports_json=["crun", "runc", "kata", "runsc", "youki", "krun"]
The list of the OCI runtimes that support --format=json
.
runtime_supports_kvm=["kata", "krun"]
The list of OCI runtimes that support running containers with KVM separation.
runtime_supports_nocgroups=["crun", "krun"]
The list of OCI runtimes that support running containers without CGroups.
image_copy_tmp_dir="/var/tmp"
Default location for storing temporary container image content. Can be overridden with the TMPDIR environment variable. If you specify "storage", then the location of the container/storage tmp directory will be used. If set then it is the users responsibility to cleanup storage. Configure tmpfiles.d(5) to cleanup storage.
service_timeout=5
Number of seconds to wait without a connection before the
podman system service
times out and exits
static_dir="/var/lib/containers/storage/libpod"
Directory for persistent libpod files (database, etc). By default this will be configured relative to where containers/storage stores containers.
stop_timeout=10
Number of seconds to wait for container to exit before sending kill signal.
exit_command_delay=300
Number of seconds to wait for the API process for the exec call before sending exit command mimicking the Docker behavior of 5 minutes (in seconds).
tmp_dir="/run/libpod"
The path to a temporary directory to store per-boot container. Must be a tmpfs (wiped after reboot).
volume_path="/var/lib/containers/storage/volumes"
Directory where named volumes will be created in using the default volume driver. By default this will be configured relative to where containers/storage store containers. This convention is followed by the default volume driver, but may not be by other drivers.
chown_copied_files=true
Determines whether file copied into a container will have changed ownership to the primary uid/gid of the container.
compression_format=""
Specifies the compression format to use when pushing an image. Supported values are: gzip
, zstd
and zstd:chunked
.
The service_destinations
table contains configuration options used to set up remote connections to the podman service for the podman API.
[service_destinations.{name}] URI to access the Podman service uri="ssh://user@production.example.com/run/user/1001/podman/podman.sock"
Example URIs:
identity="~/.ssh/id_rsa
Path to file containing ssh identity key
[engine.volume_plugins]
A table of all the enabled volume plugins on the system. Volume plugins can be used as the backend for Podman named volumes. Individual plugins are specified below, as a map of the plugin name (what the plugin will be called) to its path (filepath of the plugin's unix socket).
[engine.platform_to_oci_runtime]
Allows end users to switch the OCI runtime on the bases of container image's platform string.
Following config field contains a map of platform/string = oci_runtime
.
The secret
table contains settings for the configuration of the secret subsystem.
driver=file
Name of the secret driver to be used. Currently valid values are: * file * pass
[secrets.opts]
The driver specific options object.
The machine
table contains configurations for podman machine VMs
cpus=1 Number of CPU's a machine is created with.
disk_size=10
The size of the disk in GB created when init-ing a podman-machine VM
image=""
Default image URI when creating a new VM using podman machine init
.
Options: On Linux/Mac, testing
, stable
, next
. On Windows, the major
version of the OS (e.g 36
) for Fedora 36. For all platforms you can
alternatively specify a custom download URL to an image. Container engines
translate URIs $OS and $ARCH to the native OS and ARCH. URI "https://example.com/$OS/$ARCH/foobar.ami" would become "https://example.com/linux/amd64/foobar.ami" on a Linux AMD machine.
The default value
is testing
on Linux/Mac, and on Windows.
memory=2048
Memory in MB a machine is created with.
user=""
Username to use and create on the podman machine OS for rootless container
access. The default value is user
. On Linux/Mac the default iscore
.
volumes=["$HOME:$HOME"]
Host directories to be mounted as volumes into the VM by default.
Environment variables like $HOME as well as complete paths are supported for
the source and destination. An optional third field :ro
can be used to
tell the container engines to mount the volume readonly.
On Mac, the default volumes are: "/Users:/Users", "/private:/private", "/var/folders:/var/folders"
containers.conf
Distributions often provide a /usr/share/containers/containers.conf
file to
define default container configuration. Administrators can override fields in
this file by creating /etc/containers/containers.conf
to specify their own
configuration. Rootless users can further override fields in the config by
creating a config file stored in the $HOME/.config/containers/containers.conf
file.
If the CONTAINERS_CONF
path environment variable is set, just
this path will be used. This is primarily used for testing.
Fields specified in the containers.conf file override the default options, as well as options in previously read containers.conf files.
storage.conf
The /etc/containers/storage.conf
file is the default storage configuration file.
Rootless users can override fields in the storage config by creating
$HOME/.config/containers/storage.conf
.
If the CONTAINERS_STORAGE_CONF
path environment variable is set, this path
is used for the storage.conf file rather than the default.
This is primarily used for testing.
containers-storage.conf(5), containers-policy.json(5), containers-registries.conf(5), tmpfiles.d(5)