% CONTAINERS-REGISTRIES.CONF 5 System-wide registry configuration file

% Brent Baude

% Aug 2017

# NAME

containers-registries.conf - Syntax of System Registry Configuration File

# DESCRIPTION

The CONTAINERS-REGISTRIES configuration file is a system-wide configuration

file for container image registries. The file format is TOML.

Container engines will use the `$HOME/.config/containers/registries.conf` if it exists, otherwise they will use `/etc/containers/registries.conf`

### GLOBAL SETTINGS

`unqualified-search-registries`

: An array of _host_[`:`_port_] registries to try when pulling an unqualified image, in order.

`credential-helpers`

: An array of default credential helpers used as external credential stores.  Note that "containers-auth.json" is a reserved value to use auth files as specified in containers-auth.json(5).  The credential helpers are set to `["containers-auth.json"]` if none are specified.

### NAMESPACED `[[registry]]` SETTINGS

The bulk of the configuration is represented as an array of `[[registry]]`

TOML tables; the settings may therefore differ among different registries

as well as among different namespaces/repositories within a registry.

#### Choosing a `[[registry]]` TOML table

Given an image name, a single `[[registry]]` TOML table is chosen based on its `prefix` field.

`prefix`: A prefix of the user-specified image name, i.e. using one of the following formats:

  - _host_[`:`_port_]

  - _host_[`:`_port_]`/`_namespace_[`/`_namespace_…]

  - _host_[`:`_port_]`/`_namespace_[`/`_namespace_…]`/`_repo_

  - _host_[`:`_port_]`/`_namespace_[`/`_namespace_…]`/`_repo_(`:`_tag|`@`_digest_)

  - [`*.`]_host_

The user-specified image name must start with the specified `prefix` (and continue

with the appropriate separator) for a particular `[[registry]]` TOML table to be

considered; (only) the TOML table with the longest match is used. It can

also include wildcarded subdomains in the format `*.example.com`.

The wildcard should only be present at the beginning as shown in the formats

above. Other cases will not work. For example, `*.example.com` is valid but

`example.*.com`, `*.example.com/foo` and `*.example.com:5000/foo/bar:baz` are not.

As a special case, the `prefix` field can be missing; if so, it defaults to the value

of the `location` field (described below).

#### Per-namespace settings

`insecure`

: `true` or `false`.

By default, container runtimes require TLS when retrieving images from a registry.

If `insecure` is set to `true`, unencrypted HTTP as well as TLS connections with untrusted

certificates are allowed.

`blocked`

: `true` or `false`.

If `true`, pulling images with matching names is forbidden.

#### Remapping and mirroring registries

The user-specified image reference is, primarily, a "logical" image name, always used for naming

the image.  By default, the image reference also directly specifies the registry and repository

to use, but the following options can be used to redirect the underlying accesses

to different registry servers or locations (e.g. to support configurations with no access to the

internet without having to change `Dockerfile`s, or to add redundancy).

`location`

: Accepts the same format as the `prefix` field, and specifies the physical location

of the `prefix`-rooted namespace.

By default, this equal to `prefix` (in which case `prefix` can be omitted and the

`[[registry]]` TOML table can only specify `location`).

Example: Given

```

prefix = "example.com/foo"

location = "internal-registry-for-example.net/bar"

```

requests for the image `example.com/foo/myimage:latest` will actually work with the

`internal-registry-for-example.net/bar/myimage:latest` image.

With a `prefix` containing a wildcard in the format: "*.example.com" for subdomain matching,

the location can be empty. In such a case,

prefix matching will occur, but no reference rewrite will occur. The

original requested image string will be used as-is. But other settings like

`insecure` / `blocked` / `mirrors` will be applied to matching images.

Example: Given

```

prefix = "*.example.com"

```

requests for the image `blah.example.com/foo/myimage:latest` will be used

as-is. But other settings like insecure/blocked/mirrors will be applied to matching images

`mirror`

: An array of TOML tables specifying (possibly-partial) mirrors for the

`prefix`-rooted namespace.

The mirrors are attempted in the specified order; the first one that can be

contacted and contains the image will be used (and if none of the mirrors contains the image,

the primary location specified by the `registry.location` field, or using the unmodified

user-specified reference, is tried last).

Each TOML table in the `mirror` array can contain the following fields, with the same semantics

as if specified in the `[[registry]]` TOML table directly:

- `location`

- `insecure`

`mirror-by-digest-only`

: `true` or `false`.

If `true`, mirrors will only be used during pulling if the image reference includes a digest.

Referencing an image by digest ensures that the same is always used

(whereas referencing an image by a tag may cause different registries to return

different images if the tag mapping is out of sync).

Note that if this is `true`, images referenced by a tag will only use the primary

registry, failing if that registry is not accessible.

*Note*: Redirection and mirrors are currently processed only when reading images, not when pushing

to a registry; that may change in the future.

#### Short-Name Aliasing

The use of unqualified-search registries entails an ambiguity as it is

unclear from which registry a given image, referenced by a short name,

may be pulled from.

As mentioned in the note at the end of this man page, using short names is

subject to the risk of hitting squatted registry namespaces.  If the

unqualified-search registries are set to `["registry1.com", "registry2.com"]`

an attacker may take over a namespace of registry1.com such that an image may

be pulled from registry1.com instead of the intended source registry2.com.

While it is highly recommended to always use fully-qualified image references,

existing deployments using short names may not be easily changed.  To

circumvent the aforementioned ambiguity, so called short-name aliases can be

configured that point to a fully-qualified image

reference.

Short-name aliases can be configured in the `[aliases]` table in the form of

`"name"="value"` with the left-hand `name` being the short name (e.g., "image")

and the right-hand `value` being the fully-qualified image reference (e.g.,

"registry.com/namespace/image").  Note that neither "name" nor "value" can

include a tag or digest.  Moreover, "name" must be a short name and hence

cannot include a registry domain or refer to localhost.

When pulling a short name, the configured aliases table will be used for

resolving the short name.  If a matching alias is found, it will be used

without further consulting the unqualified-search registries list.  If no

matching alias is found, the behavior can be controlled via the

`short-name-mode` option as described below.

Note that tags and digests are stripped off a user-specified short name for

alias resolution.  Hence, "image", "image:tag" and "image@digest" all resolve

to the same alias (i.e., "image").  Stripped off tags and digests are later

appended to the resolved alias.

Further note that drop-in configuration files (see containers-registries.conf.d(5))

can override aliases in the specific loading order of the files.  If the "value" of

an alias is empty (i.e., ""), the alias will be erased.  However, a given

"name" may only be specified once in a single config file.

#### Short-Name Aliasing: Modes

The `short-name-mode` option supports three modes to control the behaviour of

short-name resolution.

* `enforcing`: If only one unqualified-search registry is set, use it as there

  is no ambiguity.  If there is more than one registry and the user program is

  running in a terminal (i.e., stdout & stdin are a TTY), prompt the user to

  select one of the specified search registries.  If the program is not running

  in a terminal, the ambiguity cannot be resolved which will lead to an error.

* `permissive`: Behaves as enforcing but does not lead to an error if the

  program is not running in a terminal.  Instead, fallback to using all

  unqualified-search registries.

* `disabled`: Use all unqualified-search registries without prompting.

If `short-name-mode` is not specified at all or left empty, default to the

`permissive` mode.  If the user-specified short name was not aliased already,

the `enforcing` and `permissive` mode if prompted, will record a new alias

after a successful pull.  Note that the recorded alias will be written to

`/var/cache/containers/short-name-aliases.conf` for root to have a clear

separation between possibly human-edited registries.conf files and the

machine-generated `short-name-aliases-conf`.  Note that `$HOME/.cache` is used

for rootless users.  If an alias is specified in a

`registries.conf` file and also the machine-generated

`short-name-aliases.conf`, the `short-name-aliases.conf` file has precedence.

#### Normalization of docker.io references

The Docker Hub `docker.io` is handled in a special way: every push and pull

operation gets internally normalized with `/library` if no other specific

namespace is defined (for example on `docker.io/namespace/image`).

(Note that the above-described normalization happens to match the behavior of

Docker.)

This means that a pull of `docker.io/alpine` will be internally translated to

`docker.io/library/alpine`. A pull of `docker.io/user/alpine` will not be

rewritten because this is already the correct remote path.

Therefore, to remap or mirror the `docker.io` images in the (implied) `/library`

namespace (or that whole namespace), the prefix and location fields in this

configuration file must explicitly include that `/library` namespace. For

example `prefix = "docker.io/library/alpine"` and not `prefix =

"docker.io/alpine"`. The latter would match the `docker.io/alpine/*`

repositories but not the `docker.io/[library/]alpine` image).

### EXAMPLE

```

unqualified-search-registries = ["example.com"]

[[registry]]

prefix = "example.com/foo"

insecure = false

blocked = false

location = "internal-registry-for-example.com/bar"

[[registry.mirror]]

location = "example-mirror-0.local/mirror-for-foo"

[[registry.mirror]]

location = "example-mirror-1.local/mirrors/foo"

insecure = true

```

Given the above, a pull of `example.com/foo/image:latest` will try:

    1. `example-mirror-0.local/mirror-for-foo/image:latest`

    2. `example-mirror-1.local/mirrors/foo/image:latest`

    3. `internal-registry-for-example.net/bar/image:latest`

in order, and use the first one that exists.

## VERSION 1 FORMAT - DEPRECATED

VERSION 1 format is still supported but it does not support

using registry mirrors, longest-prefix matches, or location rewriting.

The TOML format is used to build a simple list of registries under three

categories: `registries.search`, `registries.insecure`, and `registries.block`.

You can list multiple registries using a comma separated list.

Search registries are used when the caller of a container runtime does not fully specify the

container image that they want to execute.  These registries are prepended onto the front

of the specified container image until the named image is found at a registry.

Note that insecure registries can be used for any registry, not just the registries listed

under search.

The `registries.insecure` and `registries.block` lists have the same meaning as the

`insecure` and `blocked` fields in the current version.

### EXAMPLE

The following example configuration defines two searchable registries, one

insecure registry, and two blocked registries.

```

[registries.search]

registries = ['registry1.com', 'registry2.com']

[registries.insecure]

registries = ['registry3.com']

[registries.block]

registries = ['registry.untrusted.com', 'registry.unsafe.com']

```

# NOTE: RISK OF USING UNQUALIFIED IMAGE NAMES

We recommend always using fully qualified image names including the registry

server (full dns name), namespace, image name, and tag

(e.g., registry.redhat.io/ubi8/ubi:latest). When using short names, there is

always an inherent risk that the image being pulled could be spoofed. For

example, a user wants to pull an image named `foobar` from a registry and

expects it to come from myregistry.com. If myregistry.com is not first in the

search list, an attacker could place a different `foobar` image at a registry

earlier in the search list. The user would accidentally pull and run the

attacker's image and code rather than the intended content. We recommend only

adding registries which are completely trusted, i.e. registries which don't

allow unknown or anonymous users to create accounts with arbitrary names. This

will prevent an image from being spoofed, squatted or otherwise made insecure.

If it is necessary to use one of these registries, it should be added at the

end of the list.

It is recommended to use fully-qualified images for pulling as

the destination registry is unambiguous. Pulling by digest

(i.e., quay.io/repository/name@digest) further eliminates the ambiguity of

tags.

# SEE ALSO

 containers-auth.json(5) containers-certs.d(5)

# HISTORY

Dec 2019, Warning added for unqualified image names by Tom Sweeney <tsweeney@redhat.com>

Mar 2019, Added additional configuration format by Sascha Grunert <sgrunert@suse.com>

Aug 2018, Renamed to containers-registries.conf(5) by Valentin Rothberg <vrothberg@suse.com>

Jun 2018, Updated by Tom Sweeney <tsweeney@redhat.com>

Aug 2017, Originally compiled by Brent Baude <bbaude@redhat.com>