Blob Blame History Raw
autofs-5.1.4 - use systemd sd_notify() at startup

From: Ian Kent <raven@themaw.net>

autofs needs to ensure statd is started before any NFS mounts
are attempted.

When starting the statd service with the autofs service the statd
service will trigger a restart of the autofs service during its
start up. Sometimes this can happen during the automount start up
itself.

When this happens it causes systemd to become confused and remove
the pid file created by automount leaving systemd thinking the
autofs service had failed start up when it was actually running.

It was recommened that autofs be changed to a "Type=notify" service
to avoid this. Using this a pid file is no longer needed and is now
not used.

Signed-off-by: Ian Kent <raven@themaw.net>
---
 CHANGELOG                 |    1 
 Makefile.conf.in          |    3 
 aclocal.m4                |    3 
 autofs.spec               |    1 
 configure                 |  948 +++++++++++++++++++++++++++-------------------
 configure.in              |    8 
 daemon/Makefile           |    5 
 daemon/automount.c        |   83 ++--
 samples/autofs.service.in |    5 
 9 files changed, 635 insertions(+), 422 deletions(-)

--- autofs-5.1.4.orig/CHANGELOG
+++ autofs-5.1.4/CHANGELOG
@@ -22,6 +22,7 @@ xx/xx/2018 autofs-5.1.5
 - improve hostname lookup error logging.
 - tiny patch for autofs typo and possible bug.
 - add units After line to include statd service.
+- use systemd sd_notify() at startup.
 
 19/12/2017 autofs-5.1.4
 - fix spec file url.
--- autofs-5.1.4.orig/Makefile.conf.in
+++ autofs-5.1.4/Makefile.conf.in
@@ -18,6 +18,9 @@ NSLLIB    = @NSL_LIBS@
 NSLCFLAGS = @NSL_CFLAGS@
 LIBRESOLV = @LIBRESOLV@
 
+SYSTEMD = @WITH_SYSTEMD@
+LIBSYSTEMD = @systemd_LIBS@
+
 # Hesiod support: yes (1) no (0)
 HESIOD = @HAVE_HESIOD@
 LIBHESIOD = @LIBHESIOD@
--- autofs-5.1.4.orig/aclocal.m4
+++ autofs-5.1.4/aclocal.m4
@@ -257,14 +257,17 @@ AC_DEFUN([AF_WITH_SYSTEMD],
       fi
     done
   fi
+  WITH_SYSTEMD=0
   if test -n "$systemddir"; then
     AC_MSG_RESULT($systemddir)
+    WITH_SYSTEMD=1
   else
     AC_MSG_RESULT(not found)
   fi
 else
  if test "$withval" != no; then
   systemddir=$withval
+  WITH_SYSTEMD=1
  fi
 fi])
 ])
--- autofs-5.1.4.orig/autofs.spec
+++ autofs-5.1.4/autofs.spec
@@ -32,6 +32,7 @@ Source: https://www.kernel.org/pub/linux
 Buildroot: %{_tmppath}/%{name}-tmp
 %if %{with_systemd}
 BuildRequires: systemd-units
+BuildRequires: systemd-devel
 %endif
 %if %{with_libtirpc}
 BuildRequires: libtirpc-devel
--- autofs-5.1.4.orig/configure
+++ autofs-5.1.4/configure
@@ -674,6 +674,12 @@ MOUNT_NFS
 HAVE_MOUNT
 MOUNT
 DMALLOCLIB
+TIRPC_LIBS
+TIRPC_CFLAGS
+flagdir
+fifodir
+mapdir
+confdir
 OBJEXT
 EXEEXT
 ac_ct_CC
@@ -681,16 +687,13 @@ CPPFLAGS
 LDFLAGS
 CFLAGS
 CC
-TIRPC_LIBS
-TIRPC_CFLAGS
+systemd_LIBS
+systemd_CFLAGS
+WITH_SYSTEMD
+systemddir
 PKG_CONFIG_LIBDIR
 PKG_CONFIG_PATH
 PKG_CONFIG
-flagdir
-fifodir
-mapdir
-confdir
-systemddir
 piddir
 initdir
 target_alias
@@ -760,13 +763,15 @@ target_alias
 PKG_CONFIG
 PKG_CONFIG_PATH
 PKG_CONFIG_LIBDIR
-TIRPC_CFLAGS
-TIRPC_LIBS
+systemd_CFLAGS
+systemd_LIBS
 CC
 CFLAGS
 LDFLAGS
 LIBS
 CPPFLAGS
+TIRPC_CFLAGS
+TIRPC_LIBS
 NSL_CFLAGS
 NSL_LIBS
 CPP'
@@ -1413,9 +1418,10 @@ Some influential environment variables:
               directories to add to pkg-config's search path
   PKG_CONFIG_LIBDIR
               path overriding pkg-config's built-in search path
-  TIRPC_CFLAGS
-              C compiler flags for TIRPC, overriding pkg-config
-  TIRPC_LIBS  linker flags for TIRPC, overriding pkg-config
+  systemd_CFLAGS
+              C compiler flags for systemd, overriding pkg-config
+  systemd_LIBS
+              linker flags for systemd, overriding pkg-config
   CC          C compiler command
   CFLAGS      C compiler flags
   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
@@ -1423,6 +1429,9 @@ Some influential environment variables:
   LIBS        libraries to pass to the linker, e.g. -l<library>
   CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
               you have headers in a nonstandard directory <include dir>
+  TIRPC_CFLAGS
+              C compiler flags for TIRPC, overriding pkg-config
+  TIRPC_LIBS  linker flags for TIRPC, overriding pkg-config
   NSL_CFLAGS  C compiler flags for NSL, overriding pkg-config
   NSL_LIBS    linker flags for NSL, overriding pkg-config
   CPP         C preprocessor
@@ -2291,166 +2300,6 @@ if test -z "$piddir"; then
 fi
 
 
-#
-# Check for systemd unit files direectory exists if unit file installation
-# is requested
-#
-
-# Check whether --with-systemd was given.
-if test "${with_systemd+set}" = set; then :
-  withval=$with_systemd; if test "$withval" = yes; then
-  if test -z "$systemddir"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking location of the systemd unit files directory" >&5
-$as_echo_n "checking location of the systemd unit files directory... " >&6; }
-    for systemd_d in /usr/lib/systemd/system /usr/lib64/systemd/system /lib/systemd/system /lib64/systemd/system; do
-      if test -z "$systemddir"; then
-        if test -d "$systemd_d"; then
-          systemddir="$systemd_d"
-        fi
-      fi
-    done
-  fi
-  if test -n "$systemddir"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $systemddir" >&5
-$as_echo "$systemddir" >&6; }
-  else
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
-$as_echo "not found" >&6; }
-  fi
-else
- if test "$withval" != no; then
-  systemddir=$withval
- fi
-fi
-fi
-
-
-
-
-#
-# Location of system config script directory?
-#
-if test -z "$confdir"; then
-  for conf_d in /etc/sysconfig /etc/defaults /etc/conf.d /etc/default; do
-    if test -z "$confdir"; then
-      if test -d "$conf_d"; then
-	confdir="$conf_d"
-      fi
-    fi
-  done
-fi
-
-# Check whether --with-confdir was given.
-if test "${with_confdir+set}" = set; then :
-  withval=$with_confdir; if test -z "$withval" -o "$withval" = "yes" -o "$withval" = "no"
-	then
-		:
-	else
-		confdir="${withval}"
-	fi
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for autofs configuration file directory" >&5
-$as_echo_n "checking for autofs configuration file directory... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $confdir" >&5
-$as_echo "$confdir" >&6; }
-
-
-#
-# The user can specify --with-mapsdir=PATH to specify autofs maps go
-#
-if test -z "$mapdir"; then
-  for map_d in /etc/autofs /etc; do
-    if test -z "$mapdir"; then
-      if test -d "$map_d"; then
-	mapdir="$map_d"
-      fi
-    fi
-  done
-fi
-
-# Check whether --with-mapdir was given.
-if test "${with_mapdir+set}" = set; then :
-  withval=$with_mapdir; if test -z "$withval" -o "$withval" = "yes" -o "$withval" = "no"
-	then
-		:
-	else
-		mapdir="${withval}"
-	fi
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for autofs maps directory" >&5
-$as_echo_n "checking for autofs maps directory... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $mapdir" >&5
-$as_echo "$mapdir" >&6; }
-
-
-#
-# The user can specify --with-fifodir=PATH to specify where autofs fifos go
-#
-if test -z "$fifodir"; then
-  for fifo_d in /run /var/run /tmp; do
-    if test -z "$fifodir"; then
-      if test -d "$fifo_d"; then
-        fifodir="$fifo_d"
-      fi
-    fi
-  done
-fi
-
-# Check whether --with-fifodir was given.
-if test "${with_fifodir+set}" = set; then :
-  withval=$with_fifodir; if test -z "$withval" -o "$withval" = "yes" -o "$withval" = "no"
-	then
-		:
-	else
-		fifodir="${withval}"
-	fi
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for autofs fifos directory" >&5
-$as_echo_n "checking for autofs fifos directory... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $fifodir" >&5
-$as_echo "$fifodir" >&6; }
-
-
-#
-# The user can specify --with-flagdir=PATH to specify where autofs flag file goes
-#
-if test -z "$flagdir"; then
-  for flag_d in /run /var/run /tmp; do
-    if test -z "$flagdir"; then
-      if test -d "$flag_d"; then
-        flagdir="$flag_d"
-      fi
-    fi
-  done
-fi
-
-# Check whether --with-flagdir was given.
-if test "${with_flagdir+set}" = set; then :
-  withval=$with_flagdir; if test -z "$withval" -o "$withval" = "yes" -o "$withval" = "no"
-	then
-		:
-	else
-		flagdir="${withval}"
-	fi
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for autofs flag file directory" >&5
-$as_echo_n "checking for autofs flag file directory... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $flagdir" >&5
-$as_echo "$flagdir" >&6; }
-
-
-#
-# Use libtirpc
-#
-
 
 
 
@@ -2571,111 +2420,46 @@ $as_echo "no" >&6; }
 	fi
 fi
 
-# Check whether --with-libtirpc was given.
-if test "${with_libtirpc+set}" = set; then :
-  withval=$with_libtirpc;
-fi
-
-if test "x$with_libtirpc" = "xyes"; then
-
-pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for TIRPC" >&5
-$as_echo_n "checking for TIRPC... " >&6; }
+#
+# Check for systemd unit files direectory exists if unit file installation
+# is requested
+#
 
-if test -n "$TIRPC_CFLAGS"; then
-    pkg_cv_TIRPC_CFLAGS="$TIRPC_CFLAGS"
- elif test -n "$PKG_CONFIG"; then
-    if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libtirpc\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "libtirpc") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  pkg_cv_TIRPC_CFLAGS=`$PKG_CONFIG --cflags "libtirpc" 2>/dev/null`
-		      test "x$?" != "x0" && pkg_failed=yes
-else
-  pkg_failed=yes
-fi
- else
-    pkg_failed=untried
-fi
-if test -n "$TIRPC_LIBS"; then
-    pkg_cv_TIRPC_LIBS="$TIRPC_LIBS"
- elif test -n "$PKG_CONFIG"; then
-    if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libtirpc\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "libtirpc") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  pkg_cv_TIRPC_LIBS=`$PKG_CONFIG --libs "libtirpc" 2>/dev/null`
-		      test "x$?" != "x0" && pkg_failed=yes
+# Check whether --with-systemd was given.
+if test "${with_systemd+set}" = set; then :
+  withval=$with_systemd; if test "$withval" = yes; then
+  if test -z "$systemddir"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking location of the systemd unit files directory" >&5
+$as_echo_n "checking location of the systemd unit files directory... " >&6; }
+    for systemd_d in /usr/lib/systemd/system /usr/lib64/systemd/system /lib/systemd/system /lib64/systemd/system; do
+      if test -z "$systemddir"; then
+        if test -d "$systemd_d"; then
+          systemddir="$systemd_d"
+        fi
+      fi
+    done
+  fi
+  WITH_SYSTEMD=0
+  if test -n "$systemddir"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $systemddir" >&5
+$as_echo "$systemddir" >&6; }
+    WITH_SYSTEMD=1
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+$as_echo "not found" >&6; }
+  fi
 else
-  pkg_failed=yes
-fi
- else
-    pkg_failed=untried
+ if test "$withval" != no; then
+  systemddir=$withval
+  WITH_SYSTEMD=1
+ fi
 fi
-
-
-
-if test $pkg_failed = yes; then
-   	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
-        _pkg_short_errors_supported=yes
-else
-        _pkg_short_errors_supported=no
 fi
-        if test $_pkg_short_errors_supported = yes; then
-	        TIRPC_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libtirpc" 2>&1`
-        else
-	        TIRPC_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libtirpc" 2>&1`
-        fi
-	# Put the nasty error message in config.log where it belongs
-	echo "$TIRPC_PKG_ERRORS" >&5
-
-	as_fn_error $? "Package requirements (libtirpc) were not met:
-
-$TIRPC_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
 
-Alternatively, you may set the environment variables TIRPC_CFLAGS
-and TIRPC_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details." "$LINENO" 5
-elif test $pkg_failed = untried; then
-     	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "The pkg-config script could not be found or is too old.  Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables TIRPC_CFLAGS
-and TIRPC_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5; }
-else
-	TIRPC_CFLAGS=$pkg_cv_TIRPC_CFLAGS
-	TIRPC_LIBS=$pkg_cv_TIRPC_LIBS
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
 
 
-$as_echo "#define WITH_LIBTIRPC 1" >>confdefs.h
-
-
-$as_echo "#define TIRPC_WORKAROUND 1" >>confdefs.h
-
 
-fi
-  ac_ext=c
+ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
@@ -3465,7 +3249,511 @@ ac_link='$CC -o conftest$ac_exeext $CFLA
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-for ac_func in getrpcbyname getservbyname
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for systemd" >&5
+$as_echo_n "checking for systemd... " >&6; }
+
+if test -n "$systemd_CFLAGS"; then
+    pkg_cv_systemd_CFLAGS="$systemd_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libsystemd\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libsystemd") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_systemd_CFLAGS=`$PKG_CONFIG --cflags "libsystemd" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+if test -n "$systemd_LIBS"; then
+    pkg_cv_systemd_LIBS="$systemd_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libsystemd\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libsystemd") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_systemd_LIBS=`$PKG_CONFIG --libs "libsystemd" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+   	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi
+        if test $_pkg_short_errors_supported = yes; then
+	        systemd_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libsystemd" 2>&1`
+        else
+	        systemd_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libsystemd" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$systemd_PKG_ERRORS" >&5
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sm_notify in -lsystemd" >&5
+$as_echo_n "checking for sm_notify in -lsystemd... " >&6; }
+if ${ac_cv_lib_systemd_sm_notify+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsystemd  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char sm_notify ();
+int
+main ()
+{
+return sm_notify ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_systemd_sm_notify=yes
+else
+  ac_cv_lib_systemd_sm_notify=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_systemd_sm_notify" >&5
+$as_echo "$ac_cv_lib_systemd_sm_notify" >&6; }
+if test "x$ac_cv_lib_systemd_sm_notify" = xyes; then :
+  systemd_LIBS="-lsystemd"
+fi
+
+
+
+elif test $pkg_failed = untried; then
+     	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sm_notify in -lsystemd" >&5
+$as_echo_n "checking for sm_notify in -lsystemd... " >&6; }
+if ${ac_cv_lib_systemd_sm_notify+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsystemd  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char sm_notify ();
+int
+main ()
+{
+return sm_notify ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_systemd_sm_notify=yes
+else
+  ac_cv_lib_systemd_sm_notify=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_systemd_sm_notify" >&5
+$as_echo "$ac_cv_lib_systemd_sm_notify" >&6; }
+if test "x$ac_cv_lib_systemd_sm_notify" = xyes; then :
+  systemd_LIBS="-lsystemd"
+fi
+
+
+
+else
+	systemd_CFLAGS=$pkg_cv_systemd_CFLAGS
+	systemd_LIBS=$pkg_cv_systemd_LIBS
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+fi
+
+#
+# Location of system config script directory?
+#
+if test -z "$confdir"; then
+  for conf_d in /etc/sysconfig /etc/defaults /etc/conf.d /etc/default; do
+    if test -z "$confdir"; then
+      if test -d "$conf_d"; then
+	confdir="$conf_d"
+      fi
+    fi
+  done
+fi
+
+# Check whether --with-confdir was given.
+if test "${with_confdir+set}" = set; then :
+  withval=$with_confdir; if test -z "$withval" -o "$withval" = "yes" -o "$withval" = "no"
+	then
+		:
+	else
+		confdir="${withval}"
+	fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for autofs configuration file directory" >&5
+$as_echo_n "checking for autofs configuration file directory... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $confdir" >&5
+$as_echo "$confdir" >&6; }
+
+
+#
+# The user can specify --with-mapsdir=PATH to specify autofs maps go
+#
+if test -z "$mapdir"; then
+  for map_d in /etc/autofs /etc; do
+    if test -z "$mapdir"; then
+      if test -d "$map_d"; then
+	mapdir="$map_d"
+      fi
+    fi
+  done
+fi
+
+# Check whether --with-mapdir was given.
+if test "${with_mapdir+set}" = set; then :
+  withval=$with_mapdir; if test -z "$withval" -o "$withval" = "yes" -o "$withval" = "no"
+	then
+		:
+	else
+		mapdir="${withval}"
+	fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for autofs maps directory" >&5
+$as_echo_n "checking for autofs maps directory... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $mapdir" >&5
+$as_echo "$mapdir" >&6; }
+
+
+#
+# The user can specify --with-fifodir=PATH to specify where autofs fifos go
+#
+if test -z "$fifodir"; then
+  for fifo_d in /run /var/run /tmp; do
+    if test -z "$fifodir"; then
+      if test -d "$fifo_d"; then
+        fifodir="$fifo_d"
+      fi
+    fi
+  done
+fi
+
+# Check whether --with-fifodir was given.
+if test "${with_fifodir+set}" = set; then :
+  withval=$with_fifodir; if test -z "$withval" -o "$withval" = "yes" -o "$withval" = "no"
+	then
+		:
+	else
+		fifodir="${withval}"
+	fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for autofs fifos directory" >&5
+$as_echo_n "checking for autofs fifos directory... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $fifodir" >&5
+$as_echo "$fifodir" >&6; }
+
+
+#
+# The user can specify --with-flagdir=PATH to specify where autofs flag file goes
+#
+if test -z "$flagdir"; then
+  for flag_d in /run /var/run /tmp; do
+    if test -z "$flagdir"; then
+      if test -d "$flag_d"; then
+        flagdir="$flag_d"
+      fi
+    fi
+  done
+fi
+
+# Check whether --with-flagdir was given.
+if test "${with_flagdir+set}" = set; then :
+  withval=$with_flagdir; if test -z "$withval" -o "$withval" = "yes" -o "$withval" = "no"
+	then
+		:
+	else
+		flagdir="${withval}"
+	fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for autofs flag file directory" >&5
+$as_echo_n "checking for autofs flag file directory... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $flagdir" >&5
+$as_echo "$flagdir" >&6; }
+
+
+#
+# Use libtirpc
+#
+
+
+
+
+
+
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+	if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
+set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_PKG_CONFIG+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $PKG_CONFIG in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+PKG_CONFIG=$ac_cv_path_PKG_CONFIG
+if test -n "$PKG_CONFIG"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
+$as_echo "$PKG_CONFIG" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_PKG_CONFIG"; then
+  ac_pt_PKG_CONFIG=$PKG_CONFIG
+  # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $ac_pt_PKG_CONFIG in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
+if test -n "$ac_pt_PKG_CONFIG"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
+$as_echo "$ac_pt_PKG_CONFIG" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_pt_PKG_CONFIG" = x; then
+    PKG_CONFIG=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    PKG_CONFIG=$ac_pt_PKG_CONFIG
+  fi
+else
+  PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+fi
+
+fi
+if test -n "$PKG_CONFIG"; then
+	_pkg_min_version=0.9.0
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
+$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
+	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	else
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+		PKG_CONFIG=""
+	fi
+fi
+
+# Check whether --with-libtirpc was given.
+if test "${with_libtirpc+set}" = set; then :
+  withval=$with_libtirpc;
+fi
+
+if test "x$with_libtirpc" = "xyes"; then
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for TIRPC" >&5
+$as_echo_n "checking for TIRPC... " >&6; }
+
+if test -n "$TIRPC_CFLAGS"; then
+    pkg_cv_TIRPC_CFLAGS="$TIRPC_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libtirpc\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libtirpc") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_TIRPC_CFLAGS=`$PKG_CONFIG --cflags "libtirpc" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+if test -n "$TIRPC_LIBS"; then
+    pkg_cv_TIRPC_LIBS="$TIRPC_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libtirpc\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libtirpc") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_TIRPC_LIBS=`$PKG_CONFIG --libs "libtirpc" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+   	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi
+        if test $_pkg_short_errors_supported = yes; then
+	        TIRPC_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libtirpc" 2>&1`
+        else
+	        TIRPC_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libtirpc" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$TIRPC_PKG_ERRORS" >&5
+
+	as_fn_error $? "Package requirements (libtirpc) were not met:
+
+$TIRPC_PKG_ERRORS
+
+Consider adjusting the PKG_CONFIG_PATH environment variable if you
+installed software in a non-standard prefix.
+
+Alternatively, you may set the environment variables TIRPC_CFLAGS
+and TIRPC_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details." "$LINENO" 5
+elif test $pkg_failed = untried; then
+     	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "The pkg-config script could not be found or is too old.  Make sure it
+is in your PATH or set the PKG_CONFIG environment variable to the full
+path to pkg-config.
+
+Alternatively, you may set the environment variables TIRPC_CFLAGS
+and TIRPC_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.
+
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.
+See \`config.log' for more details" "$LINENO" 5; }
+else
+	TIRPC_CFLAGS=$pkg_cv_TIRPC_CFLAGS
+	TIRPC_LIBS=$pkg_cv_TIRPC_LIBS
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+
+$as_echo "#define WITH_LIBTIRPC 1" >>confdefs.h
+
+
+$as_echo "#define TIRPC_WORKAROUND 1" >>confdefs.h
+
+
+fi
+  for ac_func in getrpcbyname getservbyname
 do :
   as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
 ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
@@ -4522,126 +4810,6 @@ fi
 
 
 
-
-
-
-
-
-
-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
-	if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
-set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_PKG_CONFIG+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $PKG_CONFIG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-PKG_CONFIG=$ac_cv_path_PKG_CONFIG
-if test -n "$PKG_CONFIG"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
-$as_echo "$PKG_CONFIG" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_path_PKG_CONFIG"; then
-  ac_pt_PKG_CONFIG=$PKG_CONFIG
-  # Extract the first word of "pkg-config", so it can be a program name with args.
-set dummy pkg-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $ac_pt_PKG_CONFIG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  ;;
-esac
-fi
-ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
-if test -n "$ac_pt_PKG_CONFIG"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
-$as_echo "$ac_pt_PKG_CONFIG" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_pt_PKG_CONFIG" = x; then
-    PKG_CONFIG=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    PKG_CONFIG=$ac_pt_PKG_CONFIG
-  fi
-else
-  PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
-fi
-
-fi
-if test -n "$PKG_CONFIG"; then
-	_pkg_min_version=0.9.0
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
-$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
-	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-	else
-		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-		PKG_CONFIG=""
-	fi
-fi
-
 pkg_failed=no
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for NSL" >&5
 $as_echo_n "checking for NSL... " >&6; }
--- autofs-5.1.4.orig/configure.in
+++ autofs-5.1.4/configure.in
@@ -48,6 +48,7 @@ AF_INIT_D()
 AC_SUBST(initdir)
 AF_PID_D()
 AC_SUBST(piddir)
+PKG_PROG_PKG_CONFIG()
 
 #
 # Check for systemd unit files direectory exists if unit file installation
@@ -55,6 +56,12 @@ AC_SUBST(piddir)
 #
 AF_WITH_SYSTEMD()
 AC_SUBST(systemddir)
+AC_SUBST(WITH_SYSTEMD)
+PKG_CHECK_MODULES([systemd],[libsystemd],,
+[
+  AC_CHECK_LIB(systemd, sm_notify, systemd_LIBS="-lsystemd")
+  AC_SUBST(systemd_LIBS)
+])
 
 #
 # Location of system config script directory?
@@ -218,7 +225,6 @@ fi
 AC_CHECK_LIB(rt, clock_gettime, LIBCLOCK_GETTIME="-lrt")
 AC_SUBST(LIBCLOCK_GETTIME)
 
-PKG_PROG_PKG_CONFIG()
 PKG_CHECK_MODULES([NSL],[libnsl],,
 [
 AC_CHECK_LIB(nsl, yp_match, NSL_LIBS="-lnsl")
--- autofs-5.1.4.orig/daemon/Makefile
+++ autofs-5.1.4/daemon/Makefile
@@ -22,6 +22,11 @@ CFLAGS += -DVERSION_STRING=\"$(version)\
 LDFLAGS += -rdynamic
 LIBS += -ldl -lpthread
 
+ifeq ($(SYSTEMD), 1)
+    CFLAGS += -DWITH_SYSTEMD
+    LIBS += $(LIBSYSTEMD)
+endif
+
 ifeq ($(LDAP), 1)
     CFLAGS += $(XML_FLAGS)
     LIBS += $(XML_LIBS)
--- autofs-5.1.4.orig/daemon/automount.c
+++ autofs-5.1.4/daemon/automount.c
@@ -36,6 +36,9 @@
 #include <dirent.h>
 #include <sys/vfs.h>
 #include <sys/utsname.h>
+#ifdef WITH_SYSTEMD
+#include <systemd/sd-daemon.h>
+#endif
 
 #include "automount.h"
 #if defined(LIBXML2_WORKAROUND) || defined(TIRPC_WORKAROUND)
@@ -67,7 +70,7 @@ unsigned int global_selection_options;
 long global_negative_timeout = -1;
 int do_force_unlink = 0;		/* Forceably unlink mount tree at startup */
 
-static int start_pipefd[2];
+static int start_pipefd[2] = {-1, -1};
 static int st_stat = 1;
 static int *pst_stat = &st_stat;
 static pthread_t state_mach_thid;
@@ -1206,12 +1209,6 @@ static void become_daemon(unsigned foreg
 		exit(0);
 	}
 
-	if (open_pipe(start_pipefd) < 0) {
-		fprintf(stderr, "%s: failed to create start_pipefd.\n",
-			program);
-		exit(0);
-	}
-
 	/* Detach from foreground process */
 	if (foreground) {
 		if (daemon_check && !aquire_flag_file()) {
@@ -1221,6 +1218,12 @@ static void become_daemon(unsigned foreg
 		}
 		log_to_stderr();
 	} else {
+		if (open_pipe(start_pipefd) < 0) {
+			fprintf(stderr, "%s: failed to create start_pipefd.\n",
+				program);
+			exit(0);
+		}
+
 		pid = fork();
 		if (pid > 0) {
 			close(start_pipefd[1]);
@@ -2450,8 +2453,10 @@ int main(int argc, char *argv[])
 	if (pthread_attr_init(&th_attr)) {
 		logerr("%s: failed to init thread attribute struct!",
 		     program);
-		res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
-		close(start_pipefd[1]);
+		if (start_pipefd[1] != -1) {
+			res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
+			close(start_pipefd[1]);
+		}
 		release_flag_file();
 		macro_free_global_table();
 		exit(1);
@@ -2460,8 +2465,10 @@ int main(int argc, char *argv[])
 	if (pthread_attr_init(&th_attr_detached)) {
 		logerr("%s: failed to init thread attribute struct!",
 		     program);
-		res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
-		close(start_pipefd[1]);
+		if (start_pipefd[1] != -1) {
+			res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
+			close(start_pipefd[1]);
+		}
 		release_flag_file();
 		macro_free_global_table();
 		exit(1);
@@ -2471,8 +2478,10 @@ int main(int argc, char *argv[])
 			&th_attr_detached, PTHREAD_CREATE_DETACHED)) {
 		logerr("%s: failed to set detached thread attribute!",
 		     program);
-		res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
-		close(start_pipefd[1]);
+		if (start_pipefd[1] != -1) {
+			res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
+			close(start_pipefd[1]);
+		}
 		release_flag_file();
 		macro_free_global_table();
 		exit(1);
@@ -2483,8 +2492,10 @@ int main(int argc, char *argv[])
 			&th_attr_detached, detached_thread_stack_size)) {
 		logerr("%s: failed to set stack size thread attribute!",
 		       program);
-		res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
-		close(start_pipefd[1]);
+		if (start_pipefd[1] != -1) {
+			res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
+			close(start_pipefd[1]);
+		}
 		release_flag_file();
 		macro_free_global_table();
 		exit(1);
@@ -2495,8 +2506,10 @@ int main(int argc, char *argv[])
 			&th_attr_detached, &detached_thread_stack_size)) {
 		logerr("%s: failed to get detached thread stack size!",
 		       program);
-		res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
-		close(start_pipefd[1]);
+		if (start_pipefd[1] != -1) {
+			res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
+			close(start_pipefd[1]);
+		}
 		release_flag_file();
 		macro_free_global_table();
 		exit(1);
@@ -2513,8 +2526,10 @@ int main(int argc, char *argv[])
 		logerr("%s: failed to create thread data key for std env vars!",
 		       program);
 		master_kill(master_list);
-		res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
-		close(start_pipefd[1]);
+		if (start_pipefd[1] != -1) {
+			res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
+			close(start_pipefd[1]);
+		}
 		release_flag_file();
 		macro_free_global_table();
 		exit(1);
@@ -2525,8 +2540,10 @@ int main(int argc, char *argv[])
 		logerr("%s: failed to create thread data key for attempt ID!",
 		       program);
 		master_kill(master_list);
-		res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
-		close(start_pipefd[1]);
+		if (start_pipefd[1] != -1) {
+			res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
+			close(start_pipefd[1]);
+		}
 		release_flag_file();
 		macro_free_global_table();
 		exit(1);
@@ -2537,8 +2554,10 @@ int main(int argc, char *argv[])
 	if (!alarm_start_handler()) {
 		logerr("%s: failed to create alarm handler thread!", program);
 		master_kill(master_list);
-		res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
-		close(start_pipefd[1]);
+		if (start_pipefd[1] != -1) {
+			res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
+			close(start_pipefd[1]);
+		}
 		release_flag_file();
 		macro_free_global_table();
 		exit(1);
@@ -2547,8 +2566,10 @@ int main(int argc, char *argv[])
 	if (!st_start_handler()) {
 		logerr("%s: failed to create FSM handler thread!", program);
 		master_kill(master_list);
-		res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
-		close(start_pipefd[1]);
+		if (start_pipefd[1] != -1) {
+			res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
+			close(start_pipefd[1]);
+		}
 		release_flag_file();
 		macro_free_global_table();
 		exit(1);
@@ -2596,9 +2617,15 @@ int main(int argc, char *argv[])
 	 */
 	do_force_unlink = 0;
 
-	st_stat = 0;
-	res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
-	close(start_pipefd[1]);
+	if (start_pipefd[1] != -1) {
+		st_stat = 0;
+		res = write(start_pipefd[1], pst_stat, sizeof(*pst_stat));
+		close(start_pipefd[1]);
+	}
+
+#ifdef WITH_SYSTEMD
+	sd_notify(1, "READY=1");
+#endif
 
 	state_mach_thid = pthread_self();
 	statemachine(NULL);
--- autofs-5.1.4.orig/samples/autofs.service.in
+++ autofs-5.1.4/samples/autofs.service.in
@@ -4,10 +4,9 @@ After=network.target ypbind.service sssd
 Wants=network-online.target rpc-statd.service rpcbind.service
 
 [Service]
-Type=forking
-PIDFile=@@autofspiddir@@/autofs.pid
+Type=notify
 EnvironmentFile=-@@autofsconfdir@@/autofs
-ExecStart=@@sbindir@@/automount $OPTIONS --pid-file @@autofspiddir@@/autofs.pid
+ExecStart=@@sbindir@@/automount $OPTIONS --foreground --dont-check-daemon
 ExecReload=/usr/bin/kill -HUP $MAINPID
 KillMode=process
 TimeoutSec=180