# Do not terminate build if language files are empty. %define _empty_manifest_terminate_build 0 Name: authselect Version: 1.2.6 Release: 1%{?dist} Summary: Configures authentication and identity sources from supported profiles URL: https://github.com/authselect/authselect License: GPLv3+ Source0: %{url}/archive/%{version}/%{name}-%{version}.tar.gz %global makedir %{_builddir}/%{name}-%{version} Patch0001: 0001-po-update-translations.patch # Downstream only Patch0901: 0901-rhel8-remove-mention-of-Fedora-Change-page-in-compat.patch Patch0902: 0902-rhel8-remove-ecryptfs-support.patch Patch0903: 0903-rhel8-Revert-profiles-add-support-for-resolved.patch Patch0904: 0904-rhel8-Revert-yescrypt.patch BuildRequires: autoconf BuildRequires: automake BuildRequires: findutils BuildRequires: libtool BuildRequires: m4 BuildRequires: gcc BuildRequires: pkgconfig BuildRequires: pkgconfig(popt) BuildRequires: gettext-devel BuildRequires: po4a BuildRequires: %{_bindir}/a2x BuildRequires: libcmocka-devel >= 1.0.0 BuildRequires: libselinux-devel BuildRequires: python3-devel Requires: authselect-libs%{?_isa} = %{version}-%{release} Suggests: sssd Suggests: samba-winbind Suggests: fprintd-pam Suggests: oddjob-mkhomedir %description Authselect is designed to be a replacement for authconfig but it takes a different approach to configure the system. Instead of letting the administrator build the PAM stack with a tool (which may potentially end up with a broken configuration), it would ship several tested stacks (profiles) that solve a use-case and are well tested and supported. At the same time, some obsolete features of authconfig are not supported by authselect. %package libs Summary: Utility library used by the authselect tool # Required by scriptlets Requires: coreutils Requires: findutils Requires: gawk Requires: grep Requires: sed Requires: systemd Requires: pam >= 1.3.1-9 %description libs Common library files for authselect. This package is used by the authselect command line tool and any other potential front-ends. %package compat Summary: Tool to provide minimum backwards compatibility with authconfig Obsoletes: authconfig < 7.0.1-6 Provides: authconfig Requires: authselect%{?_isa} = %{version}-%{release} Recommends: oddjob-mkhomedir Suggests: sssd Suggests: realmd Suggests: samba-winbind # Required by scriptlets Requires: sed %description compat This package will replace %{_sbindir}/authconfig with a tool that will translate some of the authconfig calls into authselect calls. It provides only minimum backward compatibility and users are encouraged to migrate to authselect completely. %package devel Summary: Development libraries and headers for authselect Requires: authselect-libs%{?_isa} = %{version}-%{release} %description devel System header files and development libraries for authselect. Useful if you develop a front-end for the authselect library. %prep %setup -q for p in %patches ; do %__patch -p1 -i $p done %build autoreconf -if %configure --with-pythonbin="%{__python3}" --with-compat %make_build %check %make_build check %install %make_install # Find translations %find_lang %{name} %find_lang %{name} %{name}.8.lang --with-man %find_lang %{name}-migration %{name}-migration.7.lang --with-man %find_lang %{name}-profiles %{name}-profiles.5.lang --with-man # We want this file to contain only manual page translations %__sed -i '/LC_MESSAGES/d' %{name}.8.lang # Remove .la and .a files created by libtool find $RPM_BUILD_ROOT -name "*.la" -exec %__rm -f {} \; find $RPM_BUILD_ROOT -name "*.a" -exec %__rm -f {} \; %ldconfig_scriptlets libs %files libs -f %{name}.lang -f %{name}-profiles.5.lang %dir %{_sysconfdir}/authselect %dir %{_sysconfdir}/authselect/custom %ghost %attr(0644,root,root) %{_sysconfdir}/authselect/authselect.conf %ghost %attr(0644,root,root) %{_sysconfdir}/authselect/dconf-db %ghost %attr(0644,root,root) %{_sysconfdir}/authselect/dconf-locks %ghost %attr(0644,root,root) %{_sysconfdir}/authselect/fingerprint-auth %ghost %attr(0644,root,root) %{_sysconfdir}/authselect/nsswitch.conf %ghost %attr(0644,root,root) %{_sysconfdir}/authselect/password-auth %ghost %attr(0644,root,root) %{_sysconfdir}/authselect/postlogin %ghost %attr(0644,root,root) %{_sysconfdir}/authselect/smartcard-auth %ghost %attr(0644,root,root) %{_sysconfdir}/authselect/system-auth %ghost %attr(0644,root,root) %{_sysconfdir}/authselect/user-nsswitch.conf %dir %{_localstatedir}/lib/authselect %ghost %attr(0755,root,root) %{_localstatedir}/lib/authselect/backups/ %ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/dconf-db %ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/dconf-locks %ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/fingerprint-auth %ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/nsswitch.conf %ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/password-auth %ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/postlogin %ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/smartcard-auth %ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/system-auth %ghost %attr(0644,root,root) %{_localstatedir}/lib/authselect/user-nsswitch-created %dir %{_datadir}/authselect %dir %{_datadir}/authselect/vendor %dir %{_datadir}/authselect/default %dir %{_datadir}/authselect/default/minimal/ %dir %{_datadir}/authselect/default/nis/ %dir %{_datadir}/authselect/default/sssd/ %dir %{_datadir}/authselect/default/winbind/ %{_datadir}/authselect/default/minimal/dconf-db %{_datadir}/authselect/default/minimal/dconf-locks %{_datadir}/authselect/default/minimal/fingerprint-auth %{_datadir}/authselect/default/minimal/nsswitch.conf %{_datadir}/authselect/default/minimal/password-auth %{_datadir}/authselect/default/minimal/postlogin %{_datadir}/authselect/default/minimal/README %{_datadir}/authselect/default/minimal/REQUIREMENTS %{_datadir}/authselect/default/minimal/smartcard-auth %{_datadir}/authselect/default/minimal/system-auth %{_datadir}/authselect/default/nis/dconf-db %{_datadir}/authselect/default/nis/dconf-locks %{_datadir}/authselect/default/nis/fingerprint-auth %{_datadir}/authselect/default/nis/nsswitch.conf %{_datadir}/authselect/default/nis/password-auth %{_datadir}/authselect/default/nis/postlogin %{_datadir}/authselect/default/nis/README %{_datadir}/authselect/default/nis/REQUIREMENTS %{_datadir}/authselect/default/nis/smartcard-auth %{_datadir}/authselect/default/nis/system-auth %{_datadir}/authselect/default/sssd/dconf-db %{_datadir}/authselect/default/sssd/dconf-locks %{_datadir}/authselect/default/sssd/fingerprint-auth %{_datadir}/authselect/default/sssd/nsswitch.conf %{_datadir}/authselect/default/sssd/password-auth %{_datadir}/authselect/default/sssd/postlogin %{_datadir}/authselect/default/sssd/README %{_datadir}/authselect/default/sssd/REQUIREMENTS %{_datadir}/authselect/default/sssd/smartcard-auth %{_datadir}/authselect/default/sssd/system-auth %{_datadir}/authselect/default/winbind/dconf-db %{_datadir}/authselect/default/winbind/dconf-locks %{_datadir}/authselect/default/winbind/fingerprint-auth %{_datadir}/authselect/default/winbind/nsswitch.conf %{_datadir}/authselect/default/winbind/password-auth %{_datadir}/authselect/default/winbind/postlogin %{_datadir}/authselect/default/winbind/README %{_datadir}/authselect/default/winbind/REQUIREMENTS %{_datadir}/authselect/default/winbind/smartcard-auth %{_datadir}/authselect/default/winbind/system-auth %{_libdir}/libauthselect.so.* %{_mandir}/man5/authselect-profiles.5* %{_datadir}/doc/authselect/COPYING %{_datadir}/doc/authselect/README.md %license COPYING %doc README.md %files compat %{_sbindir}/authconfig %{python3_sitelib}/authselect/ %files devel %{_includedir}/authselect.h %{_libdir}/libauthselect.so %{_libdir}/pkgconfig/authselect.pc %files -f %{name}.8.lang -f %{name}-migration.7.lang %{_bindir}/authselect %{_mandir}/man8/authselect.8* %{_mandir}/man7/authselect-migration.7* %{_sysconfdir}/bash_completion.d/authselect-completion.sh %global validfile %{_localstatedir}/lib/rpm-state/%{name}.config-valid %preun if [ $1 == 0 ] ; then # Remove authselect symbolic links so all authselect files can be # deleted safely. If this fail, the uninstallation must fail to avoid # breaking the system by removing PAM files. However, the command can # only fail if it can not write to the file system. %{_bindir}/authselect uninstall fi %pre libs %__rm -f %{validfile} if [ $1 -gt 1 ] ; then # Remember if the current configuration is valid %{_bindir}/authselect check &> /dev/null if [ $? -eq 0 ]; then touch %{validfile} fi fi exit 0 %posttrans libs # Copy nsswitch.conf to user-nsswitch.conf if it was not yet created if [ ! -f %{_localstatedir}/lib/authselect/user-nsswitch-created ]; then %__cp -n %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/authselect/user-nsswitch.conf &> /dev/null touch %{_localstatedir}/lib/authselect/user-nsswitch-created &> /dev/null # If we are upgrading from older version, we want to remove these comments. %__sed -i '/^# Generated by authselect on .*$/{$!{ N;N # Read also next two lines /# Generated by authselect on .*\n# Do not modify this file manually.\n/d }}' %{_sysconfdir}/authselect/user-nsswitch.conf &> /dev/null fi # If the configuration is valid and we are upgrading from older version # we need to create these files since they were added in 1.0. if [ -f %{validfile} ]; then FILES="nsswitch.conf system-auth password-auth fingerprint-auth \ smartcard-auth postlogin dconf-db dconf-locks" for FILE in $FILES ; do %__cp -n %{_sysconfdir}/authselect/$FILE \ %{_localstatedir}/lib/authselect/$FILE &> /dev/null done %__rm -f %{validfile} fi # Keep nss-altfiles for all rpm-ostree based systems. # See https://github.com/authselect/authselect/issues/48 if test -e /run/ostree-booted; then for PROFILE in `ls %{_datadir}/authselect/default`; do %{_bindir}/authselect create-profile $PROFILE --vendor --base-on $PROFILE --symlink-pam --symlink-dconf --symlink=REQUIREMENTS --symlink=README &> /dev/null %__sed -ie "s/^\(passwd\|group\):\(.*\)systemd\(.*\)/\1:\2systemd altfiles\3/g" %{_datadir}/authselect/vendor/$PROFILE/nsswitch.conf &> /dev/null done fi # Apply any changes to profiles (validates configuration first internally) %{_bindir}/authselect apply-changes &> /dev/null # Enable with-sudo feature if sssd-sudo responder is enabled. RHBZ#1582111 CURRENT=`%{_bindir}/authselect current --raw 2> /dev/null` if [ $? -eq 0 ]; then PROFILE=`echo $CURRENT | %__awk '{print $1;}'` if [ $PROFILE == "sssd" ] ; then if %__grep -E "services[[:blank:]]*=[[:blank:]]*.*sudo" /etc/sssd/sssd.conf &> /dev/null ; then %{_bindir}/authselect enable-feature with-sudo &> /dev/null elif systemctl is-active sssd-sudo.service sssd-sudo.socket --quiet || systemctl is-enabled sssd-sudo.socket --quiet ; then %{_bindir}/authselect enable-feature with-sudo &> /dev/null fi fi fi exit 0 %posttrans compat # Fix for RHBZ#1618865 # Remove invalid lines from pwquality.conf generated by authconfig compat tool # - previous version could write some options without value, which is invalid # - we delete all options without value from existing file %__sed -i -E '/^\w+=$/d' %{_sysconfdir}/security/pwquality.conf.d/10-authconfig-pwquality.conf &> /dev/null exit 0 %changelog * Thu Dec 1 2022 Pavel Březina - 1.2.6-1 - Rebase to 1.2.6 (RHBZ #2142805) - Update translations (RHBZ #2139696) - Change password hashing algorithm from yescrypt back to sha512 (RHBZ #2151140) * Thu May 5 2022 Pavel Březina - 1.2.5-1 - Rebase to 1.2.5 (RHBZ #2080238) - sssd profile with-smartcard no longer prevents local users from accessing cron (RHBZ #2070325) - backup-restore now works correctly (RHBZ #2066535) - add with-subid to sssd profile (RHBZ #2063750) * Wed Jul 14 2021 Pavel Březina - 1.2.2-3 - Update translations (RHBZ #1961625) * Wed Jul 14 2021 Pavel Březina - 1.2.2-2 - try_first_pass option no longer works on some PAM modules in RHEL8 (RHBZ #1949070) - Need to localize the description of --debug option in authselect show (RHBZ #1970408) * Wed Nov 25 2020 Pavel Březina - 1.2.2-1 - Rebase to authselect-1.2.2 (RHBZ #1892761) * Fri Jun 19 2020 Pavel Březina - 1.2.1-2 - Update translations (RHBZ #1820533) * Tue May 12 2020 Pavel Březina - 1.2.1-1 - Rebase to authselect-1.2.1 (RHBZ #1810471) - CLI commands are now correctly translated (RHBZ #1816009) - Remove unsupported features from sssd profile description (RHBZ #1830251) - add `with-files-access-provider` to sssd profile (RHBZ #1734094) - switch to pam_usertype module (RHBZ #1773567) - fix typo in sssd profile description (RHBZ #1787638) - add minimal profile (RHBZ #1654018) * Thu Jul 4 2019 Pavel Březina - 1.1-2 - Update translations (RHBZ #1689973) * Mon Jun 10 2019 Pavel Březina - 1.1-1 - Rebase to authselect-1.1 (RHBZ #1685516) - Notify that oddjob-mkhomedir needs to be enabled manually (RHBZ #1694103) - Ask for smartcard insertion when smartcard authentication is required (RHBZ #1674397) - Update translations (RHBZ #1689973) * Mon Feb 25 2019 Jakub Hrozek - 1.0-13 - Revert pam_systemd.so to be optional - Resolves: #rhbz1643928 - pam_systemd shouldn't be optional in system-auth * Mon Feb 4 2019 Pavel Březina - 1.0-12 - make authselect work with selinux disabled (RHBZ #1668025) - require smartcard authentication only for specific services (RHBZ #1665058) - update translations (RHBZ #1608286) * Fri Jan 11 2019 Pavel Březina - 1.0-11 - require libselinux needed by (RHBZ #1664650) * Fri Jan 11 2019 Pavel Březina - 1.0-10 - invalid selinux context for files under /etc/authselect (RHBZ #1664650) * Tue Dec 4 2018 Pavel Březina - 1.0-9 - fix sources for official rhel translations (RHBZ #1608286) - fix coverity warnings for authselect enable-features should error on unknown features (RHBZ #1651637) * Mon Dec 3 2018 Pavel Březina - 1.0-8 - add official rhel translations (RHBZ #1608286) * Mon Dec 3 2018 Pavel Březina - 1.0-7 - pam_systemd shouldn't be optional in system-auth (RHBZ #1643928) - compat tool: support --enablerequiresmartcard (RHBZ #1649277) - compat tool: support --smartcardaction=0 (RHBZ #1649279) - remove ecryptfs from authselect since it is not present in rhel8 (RHBZ #1649282) - authselect enable-features should error on unknown features (RHBZ #1651637) * Wed Oct 31 2018 Pavel Březina - 1.0-6 - Remove mention of Fedora Change page from compat tool (RHBZ #1644309) * Wed Oct 10 2018 Pavel Březina - 1.0-5 - Support for "require smartcard for login option" (RHBZ #1611012) * Mon Oct 1 2018 Pavel Březina - 1.0-4 - add official rhel translations (RHBZ #1608286) * Fri Sep 28 2018 Pavel Březina - 1.0-3 - scriptlet can fail if coreutils is not installed (RHBZ #1630896) - fix typo (require systemd instead of systemctl) * Thu Sep 27 2018 Pavel Březina - 1.0-2 - authconfig --update overwrites current profile (RHBZ #1628492) - authselect profile nis enhancements (RHBZ #1628493) - scriptlet can fail if coreutils is not installed (RHBZ #1630896) - authconfig --update --enablenis stops ypserv (RHBZ #1632567) - compat tool generates invalid pwquality configuration (RHBZ #1628491) * Mon Aug 13 2018 Pavel Březina - 1.0-1 - Rebase to 1.0 (RHBZ #1614235) * Wed Aug 01 2018 Charalampos Stratakis - 0.4-4 - Rebuild for platform-python * Mon May 14 2018 Pavel Březina - 0.4-3 - Disable sssd as sudo rules source with sssd profile by default (RHBZ #1573403) * Wed Apr 25 2018 Christian Heimes - 0.4-2 - Don't disable oddjobd.service (RHBZ #1571844) * Mon Apr 9 2018 Pavel Březina - 0.4-1 - rebasing to 0.4 * Tue Mar 6 2018 Pavel Březina - 0.3.2-1 - rebasing to 0.3.2 - authselect-compat now only suggests packages, not recommends * Mon Mar 5 2018 Pavel Březina - 0.3.1-1 - rebasing to 0.3.1 * Tue Feb 20 2018 Igor Gnatenko - 0.3-3 - Provide authconfig * Tue Feb 20 2018 Igor Gnatenko - 0.3-2 - Properly own all appropriate directories - Remove unneeded %%defattr - Remove deprecated Group tag - Make Obsoletes versioned - Remove unneeded ldconfig scriptlets * Tue Feb 20 2018 Pavel Březina - 0.3-1 - rebasing to 0.3 * Wed Feb 07 2018 Fedora Release Engineering - 0.2-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild * Wed Jan 10 2018 Pavel Březina - 0.2-2 - fix rpmlint errors * Wed Jan 10 2018 Pavel Březina - 0.2-1 - rebasing to 0.2 * Mon Jul 31 2017 Jakub Hrozek - 0.1-1 - initial packaging