/testing/guestbin/swan-prep --x509
Preparing X.509 files
road #
 certutil -D -n road -d sql:/etc/ipsec.d
road #
 certutil -D -n east -d sql:/etc/ipsec.d
road #
 cp road-ikev2-oe.conf /etc/ipsec.d/ikev2-oe.conf
road #
 cp policies/* /etc/ipsec.d/policies/
road #
 echo "192.1.3.128/27"  >> /etc/ipsec.d/policies/private-or-clear
road #
 ipsec start
Redirecting to: systemctl start ipsec.service
road #
 /testing/pluto/bin/wait-until-pluto-started
road #
 ipsec whack --impair retransmits
road #
 # ensure for tests acquires expire before our failureshunt=2m
road #
 echo 30 > /proc/sys/net/core/xfrm_acq_expires
road #
 # give OE policies time to load
road #
 sleep 5
road #
 ip -s xfrm monitor > /tmp/xfrm-monitor.out &
[x] PID
road #
 echo "initdone"
initdone
road #
 # one packet, which gets eaten by XFRM, so east does not initiate
road #
 ping -n -c 1 -I 192.1.3.209 192.1.3.130
PING 192.1.3.130 (192.1.3.130) from 192.1.3.209 : 56(84) bytes of data.
--- 192.1.3.130 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time XXXX
road #
 # wait on OE IKE negotiation
road #
 # ping should succeed through tunnel
road #
 ping -n -c 2 -I 192.1.3.209 192.1.3.130
PING 192.1.3.130 (192.1.3.130) from 192.1.3.209 : 56(84) bytes of data.
64 bytes from 192.1.3.130: icmp_seq=1 ttl=64 time=0.XXX ms
64 bytes from 192.1.3.130: icmp_seq=2 ttl=64 time=0.XXX ms
--- 192.1.3.130 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time XXXX
rtt min/avg/max/mdev = 0.XXX/0.XXX/0.XXX/0.XXX ms
road #
 sleep 1
road #
 # should show established tunnel and no bare shunts
road #
 ipsec whack --trafficstatus
006 #2: "private-or-clear#192.1.3.128/27"[1] ...192.1.3.130, type=ESP, add_time=1234567890, inBytes=168, outBytes=168, id='C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, E=user-east@testing.libreswan.org'
road #
 ipsec whack --shuntstatus
000 Bare Shunt list:
000  
road #
 killall ip > /dev/null 2> /dev/null
[1]+  Terminated              ip -s xfrm monitor > /tmp/xfrm-monitor.out
road #
 cp /tmp/xfrm-monitor.out OUTPUT/road.xfrm-monitor.txt
road #
 echo done
done
road #
 # A tunnel should have established with non-zero byte counters
road #
 ip addr show scope global
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default
    link/ether 12:00:00:ab:cd:02 brd ff:ff:ff:ff:ff:ff
    inet 192.1.3.209/24 brd 192.1.3.255 scope global eth0
       valid_lft forever preferred_lft forever
3: ip_vti0@NONE: <NOARP> mtu 1332 qdisc noop state DOWN group default
    link/ipip 0.0.0.0 brd 0.0.0.0
road #
 # jacob two two for east?
road #
 ipsec whack --trafficstatus
road #
 ipsec whack --trafficstatus
road #
 ../../pluto/bin/ipsec-look.sh
road NOW
XFRM state:
src 192.1.3.209 dst 192.1.3.130
	proto esp spi 0xSPISPI reqid REQID mode transport
	replay-window 0 
	sel src 192.1.3.209/32 dst 192.1.3.130/32 proto icmp type 8 code 0 dev eth0 
XFRM policy:
src 192.1.2.253/32 dst 192.1.3.209/32
	dir fwd priority 1564639 ptype main
src 192.1.2.253/32 dst 192.1.3.209/32
	dir in priority 1564639 ptype main
src 192.1.3.209/32 dst 192.1.2.253/32
	dir out priority 1564639 ptype main
src 192.1.3.209/32 dst 192.1.3.253/32
	dir out priority 1564639 ptype main
src 192.1.3.209/32 dst 192.1.3.254/32
	dir out priority 1564639 ptype main
src 192.1.3.253/32 dst 192.1.3.209/32
	dir fwd priority 1564639 ptype main
src 192.1.3.253/32 dst 192.1.3.209/32
	dir in priority 1564639 ptype main
src 192.1.3.254/32 dst 192.1.3.209/32
	dir fwd priority 1564639 ptype main
src 192.1.3.254/32 dst 192.1.3.209/32
	dir in priority 1564639 ptype main
src 192.1.3.209/32 dst 192.1.3.128/27
	dir out priority 1564644 ptype main
	tmpl src 0.0.0.0 dst 0.0.0.0
		proto esp reqid REQID mode transport
XFRM done
IPSEC mangle TABLES
NEW_IPSEC_CONN mangle TABLES
ROUTING TABLES
default via 192.1.3.254 dev eth0 
192.1.3.0/24 dev eth0 proto kernel scope link src 192.1.3.209 
NSS_CERTIFICATES
Certificate Nickname                                         Trust Attributes
                                                             SSL,S/MIME,JAR/XPI
Libreswan test CA for mainca - Libreswan                     CT,, 
east-ec                                                      P,,  
hashsha2                                                     P,,  
nic                                                          P,,  
north                                                        P,,  
west                                                         P,,  
west-ec                                                      P,,  
road #
 # you should see both RSA and NULL
road #
 grep IKEv2_AUTH_ /tmp/pluto.log
|    auth method: IKEv2_AUTH_NULL (0xd)
|    auth method: IKEv2_AUTH_DIGSIG (0xe)
road #
road #
 ../bin/check-for-core.sh
road #
 if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi

