diff --git a/.OpenIPMI.metadata b/.OpenIPMI.metadata new file mode 100644 index 0000000..ab18d01 --- /dev/null +++ b/.OpenIPMI.metadata @@ -0,0 +1 @@ +4c1d141680e1aaf278a588843b7a23360c34058c SOURCES/OpenIPMI-2.0.19.tar.gz diff --git a/README.md b/README.md deleted file mode 100644 index 0e7897f..0000000 --- a/README.md +++ /dev/null @@ -1,5 +0,0 @@ -The master branch has no content - -Look at the c7 branch if you are working with CentOS-7, or the c4/c5/c6 branch for CentOS-4, 5 or 6 - -If you find this file in a distro specific branch, it means that no content has been checked in yet diff --git a/SOURCES/OpenIPMI-2.0.18-pthread-pkgconfig.patch b/SOURCES/OpenIPMI-2.0.18-pthread-pkgconfig.patch new file mode 100644 index 0000000..9a76208 --- /dev/null +++ b/SOURCES/OpenIPMI-2.0.18-pthread-pkgconfig.patch @@ -0,0 +1,18 @@ +468067 - "pkg-config --libs OpenIPMIpthread" fails + +Fix the pkgconfig file. + +Reported upstream as http://sourceforge.net/tracker/index.php?func=detail&aid=2188750&group_id=36127&atid=416301 + +diff -up OpenIPMI-2.0.18/OpenIPMIpthread.pc.in.orig OpenIPMI-2.0.18/OpenIPMIpthread.pc.in +--- OpenIPMI-2.0.18/OpenIPMIpthread.pc.in.orig 2005-08-17 05:56:02.000000000 +0200 ++++ OpenIPMI-2.0.18/OpenIPMIpthread.pc.in 2010-05-20 15:48:07.000000000 +0200 +@@ -6,6 +6,6 @@ includedir=@includedir@ + Name: OpenIPMIpthread + Description: Pthread OS handler for OpenIPMI + Version: @VERSION@ +-Requires: OpenIPMI pthread ++Requires: OpenIPMI + Libs: -L${libdir} -lOpenIPMIutils -lOpenIPMIpthread +-Cflags: -I${includedir} ++Cflags: -I${includedir} -pthread diff --git a/SOURCES/OpenIPMI-2.0.19-man.patch b/SOURCES/OpenIPMI-2.0.19-man.patch new file mode 100644 index 0000000..42959d9 --- /dev/null +++ b/SOURCES/OpenIPMI-2.0.19-man.patch @@ -0,0 +1,505 @@ +diff -up ./man/ipmi_cmdlang.7.manscan ./man/ipmi_cmdlang.7 +--- ./man/ipmi_cmdlang.7.manscan 2013-06-05 10:21:15.742099865 +0200 ++++ ./man/ipmi_cmdlang.7 2013-06-05 10:40:49.767658999 +0200 +@@ -246,7 +246,7 @@ instance, the command to create a domain + The command to list all sensors in a domain named domain1 is + .B sensor list domain1. + +-Each command has a reponse for each object operated on, which is ++Each command has a response for each object operated on, which is + listed after the command description. In those responses, anything + that begins with a + .B % +@@ -316,7 +316,7 @@ BMC. For that, notice that the LAN conn + and port for the second IP address. OpenIPMI supports these IP + addresses and connection, detecting failures, switching between + addresses, and other fault-tolerant things. It does this +-transparently to the user. Mutiple connections may require special ++transparently to the user. Multiple connections may require special + OEM support, read the documentation about your specific system if you + need this. + +@@ -336,7 +336,7 @@ or + \fI\fP and \fI\fP are the user name and password of + the IPMI user to use for the connection. + The is the driver number, generally 0. +-Options enable and disable various automitic processing and are: ++Options enable and disable various automatic processing and are: + .PD 0 + .HP + .B -[no]all +@@ -356,7 +356,7 @@ is false by default. + is false by default. + .HP + .B -[no]ipmbscan +-- IPMB bus scanning. This turns on scanning IPMB busses when they are found. ++- IPMB bus scanning. This turns on scanning IPMB buses when they are found. + This is false by default. + .HP + .B -[no]oeminit +@@ -461,7 +461,7 @@ available hacks are: + The -M option sets the maximum outstanding messages. The default is + 2, ranges 1-63. + +-Options enable and disable various automitic processing and are: ++Options enable and disable various automatic processing and are: + .PD 0 + .HP + .B -[no]all +@@ -519,7 +519,7 @@ Domain Created: + .RE + + .B fru +-- dump a fru given all it's insundry information. ++- dump a fru given all it's sundry information. + .TP + Response: + .RS +@@ -533,7 +533,7 @@ Domain + + .B msg [data...] + - Send a command to the given IPMB address on the given channel and +-display the response. Note that this does not require the existance ++display the response. Note that this does not require the existence + of an MC in OpenIPMI. + .TP + Response: +@@ -571,7 +571,7 @@ SEL Rescan done: + .RE + + .B presence +-- Audit the presence of all enities in the domain. Note that this just ++- Audit the presence of all entities in the domain. Note that this just + starts the process; it will run in the background. + .TP + Response is: +@@ -689,7 +689,7 @@ FRU deleted: + - Set the value of a FRU element. The + name is the record name, or multi-record. The number is required + for fields that need it (custom and multi-record). The value is +-an a single value for integers. For strings it is a string ++a single value for integers. For strings it is a string + type (either binary, ascii, or unicode) and the info. Binary and + unicode data is specified as numbers. ascii data is specified in + a string. Note that setting a ascii value with no string will +@@ -770,7 +770,7 @@ Domain + .B info + - Dump information about an entity. + .TP +-Reponse: ++Response: + .RS + .nf + Entity +@@ -784,7 +784,7 @@ Entity + .B fru + - Dump the FRU information about the given entity. + .TP +-Reponse: ++Response: + .RS + .nf + Entity +@@ -813,7 +813,7 @@ Entity + .B set_act_time + - Set the hot-swap auto-activate time. + .TP +-Reponse: ++Response: + .RS + .nf + Set act time: +@@ -981,7 +981,7 @@ Response: + .nf + Sensor + Name: +- Positivie Hysteresis: ++ Positive Hysteresis: + Negative Hysteresis: + .fi + .RE +@@ -1101,7 +1101,7 @@ Set done: + .RE + + .B get +-- Get the value of a control. The reponse depends ++- Get the value of a control. The response depends + on the control type. + .TP + Response: +@@ -1128,7 +1128,7 @@ multiple lights. The options values (ma + ) will not be + present if local control is set to true. Local control means that + the LED takes whatever default function it does on the device +-(like disk activity, ethernet activity, hot-swap LED, etc.). ++(like disk activity, Ethernet activity, hot-swap LED, etc.). + Response for id control: + .RS + .nf +@@ -1325,7 +1325,7 @@ Channel Access + - Set information about the MC's channel access. There are two different + places where this is stored, the present in-use values (volatile) and the + non-volatile storage that is loaded at startup. Note if you specify +-channel 0xe, the modified channel will be the current channel. Parms ++channel 0xe, the modified channel will be the current channel. Parameters + are: + .RS + .nf +@@ -1547,7 +1547,7 @@ PET destroyed: + .SS pef + commands dealing with platform even filters. These are basically + connections to the PEF configuration parameters in an MC. You use a +-pef to fetch a pef config, which you can then modify and write back to ++pef to fetch a pef configuration, which you can then modify and write back to + the MC. Note that when you get a pef config, you claim a lock on the + MC that must be unlocked. + +@@ -1780,7 +1780,7 @@ operational and finished all it SDR, FRU + .fi + .RE + +-The following comes out when domain connection infomration changes: ++The following comes out when domain connection information changes: + .RS + .nf + EVENT +diff -up ./man/ipmilan.8.manscan ./man/ipmilan.8 +--- ./man/ipmilan.8.manscan 2013-06-04 15:43:43.597127168 +0200 ++++ ./man/ipmilan.8 2013-06-05 13:36:31.282753184 +0200 +@@ -29,18 +29,25 @@ address they came in. + + .SH OPTIONS + .TP +-.BI \-c\ config-file ++\fB\-c\fR file,\ \fB\-\-config\-file\fR file + Set the configuration file to one other than the default of + .I "/etc/ipmi_lan.conf" + .TP +-.B \-n ++\fB\-i\fR device,\ \fB\-\-ipmi-dev\fR device ++Sets the desired device ++.TP ++\fB\-n\fR,\ \fB\-\-daemonize\fR + Stops the daemon from forking and detaching from the controlling + terminal. This is useful for running from init. + .TP +-.B \-d ++\fB\-d\fR,\ \fB\-\-debug\fR + Turns on debugging to standard output. You generally have to use + .B \-n + with this. ++.TP ++\fB\-?\fR,\ \fB\-\-help\fR,\ \fB\-\-usage\fR ++Prints brief usage hints message. ++ + + + .SH CONFIGURATION +diff -up ./man/ipmi_ui.1.manscan ./man/ipmi_ui.1 +--- ./man/ipmi_ui.1.manscan 2013-06-04 15:33:32.206892146 +0200 ++++ ./man/ipmi_ui.1 2013-06-05 10:44:52.592882502 +0200 +@@ -4,7 +4,7 @@ + ipmi_ui \- Crude interface to an IPMI system + + .SH SYNOPSIS +-.B ipmiui ++.B ipmi_ui + .RB [\| \-dmsg \|] + .RB [\| \-dmem \|] + .RB [\| \-c \|] +@@ -34,7 +34,7 @@ Normally, + starts up in a full-screen format. The left window shows the output + of commands, the right window shows the logs from OpenIPMI. Both + windows are scrollable with page up and page down keys, press the "\fBF1\fP" +-key to choose the the left window to scroll, the "\fBF2\fP" key to choose ++key to choose the left window to scroll, the "\fBF2\fP" key to choose + the right window to scroll. + + Note that you must set your environment \fBTERM\fP variable properly for +@@ -48,7 +48,7 @@ the connections are to the same IPMI dom + management controllers. Also, each LAN connection may have two IP + addresses. These are two different addresses to the same management + controller. So you may have a total of 4 IP addresses to an IPMI +-domain, two management controllers and two IP adresses to each ++domain, two management controllers and two IP addresses to each + management controller. + + .SH OPTIONS +@@ -174,12 +174,12 @@ turns events on or off from the sensor ( + turns scanning on or off for the sensor (\fB0\fP or \fB1\fP). + .I "assertion-bitmask" + specifies the bitmask of thresholds or states +-that should be enabled or disabled when a thrshold or state is ++that should be enabled or disabled when a threshold or state is + asserted. It is a bunch of 0's and 1's, where the first one is for + threshold/state 0, the second for threshold/state 1, etc. + .I "deassertion-bitmask" + specifies the bitmask of thresholds or states +-that should be enabled or disabled when a thrshold or state is ++that should be enabled or disabled when a threshold or state is + deasserted. + + .SH CONTROLS +diff -up ./man/openipmicmd.1.manscan ./man/openipmicmd.1 +--- ./man/openipmicmd.1.manscan 2013-06-04 13:57:08.825074711 +0200 ++++ ./man/openipmicmd.1 2013-06-05 10:45:54.938921332 +0200 +@@ -22,7 +22,7 @@ interfaces. + Execute a single command an exit. + + .TP +-.BI ++.BI + The parameters for the connection depend on the connection type. + These are all described in openipmi_conparms (7) + +@@ -32,7 +32,7 @@ Once up, you can execute commands in the + commands and responses are asynchronous, you issue a command and the + interface returns immediately. When the response comes back, it will + be dumped on your console. That's a little strange looking, but IPMI +-is ansychronous underneath. Note that the \fB\-k\fP option is synchronous, ++is asynchronous underneath. Note that the \fB\-k\fP option is synchronous, + it will wait for the response or a timeout before returning. + + .TP +@@ -82,7 +82,7 @@ Remove a command registration. + .BR openipmi_conparms (7) + + .SH "KNOWN PROBLEMS" +-The asychronous nature of the program can be annoying. ++The asynchronous nature of the program can be annoying. + + .SH AUTHOR + .PP +diff -up ./man/openipmi_conparms.7.manscan ./man/openipmi_conparms.7 +--- ./man/openipmi_conparms.7.manscan 2013-06-05 10:46:13.818932142 +0200 ++++ ./man/openipmi_conparms.7 2013-06-05 10:47:48.332980969 +0200 +@@ -1,7 +1,7 @@ + .TH openipmi_conparms 7 05/13/03 OpenIPMI "Connection Parameters for OpenIPMI" + + .SH NAME +-openipmi_cmdparms \- Connection parmeters for OpenIPMI ++openipmi_cmdparms \- Connection parameters for OpenIPMI + + .SH SYNOPSIS + +@@ -97,7 +97,7 @@ use. + .TP + .BI \-Rc\ confidentiality\ algorithm + The \fIRMCP+ confidentiality (encryption) algorithm\fP to use. This keeps +-evesdroppers from seeing the data. Valid values are: \fBbmcpick\fP, ++eavesdroppers from seeing the data. Valid values are: \fBbmcpick\fP, + \fBaes_cbc_128\fP, \fBxrc4_128\fP, and \fBxrc_40\fP. The \fBbmcpick\fP option is used by + default, which means the BMC picks the algorithm it wants to use. + +diff -up ./man/openipmigui.1.manscan ./man/openipmigui.1 +--- ./man/openipmigui.1.manscan 2013-06-05 10:48:43.389006143 +0200 ++++ ./man/openipmigui.1 2013-06-05 10:51:13.372066408 +0200 +@@ -38,7 +38,7 @@ Turn on message debugging, this will dum + .TP + .B \-\-drawmsg + Turn on raw message debugging, this will dump all low-level messages to +-debug log output. This differes from normal message debugging in that all ++debug log output. This differs from normal message debugging in that all + protocol messages are also dumped, not just IPMI messages. + .TP + .B \-\-dmem +@@ -81,7 +81,7 @@ tree. + + The tree window has a top-level list of all the domains for which + OpenIPMI has connections (or pending connection). Each domain +-exapands into domain-specific information and a list of entities and ++expands into domain-specific information and a list of entities and + Management Controllers (MCs) for that domain. + + Right click drives most of the operations in the tree window. Many +@@ -92,7 +92,7 @@ Color is used in the GUI to denote error + to denote availability. If a sensor has an error, the tree entry for + that sensor will change colors. Black means no error, yellow means + warning, red means critical, and blue means non-recoverable. These +-errors propigate up, so the entity containing that sensor will be the ++errors propagate up, so the entity containing that sensor will be the + same color as the most critical error for the sensors underneath it. + The same goes for domain, it will be the same color as the most + critical error for the entities underneath it. This way, if you watch +@@ -146,7 +146,7 @@ that sensor. + + .SH CONTROLS + +-Controls are available under the entity they belong to. control ++Controls are available under the entity they belong to. Control + information is beyond the scope of this document, as IPMI controls are + very complex. See the IPMI document from OpenIPMI for information + about controls. +@@ -214,7 +214,7 @@ channel listing. Note that some user se + are global to all channels on the MC. + + Due to the IPMI spec and some unfortunate implementation bugs, some +-wierd issues exist with this information. The user has an Enabled ++weird issues exist with this information. The user has an Enabled + value that tells whether the user is enabled or not. When initially + displayed, this field shows as a "?" because this field is not + readable. It will displayed as the actual value when it is modified, +@@ -247,7 +247,7 @@ changed. + .SH SOLPARMS + + In the channel display on a 8023_LAN channel, a LANPARM configuration +-command is available if the MC supporte SOL (Serial Over LAN). This ++command is available if the MC supports SOL (Serial Over LAN). This + pulls up all the parameters for the LAN and allows them to be set. + Right-clicking on an item allows it to be changed. + +diff -up ./man/openipmish.1.manscan ./man/openipmish.1 +--- ./man/openipmish.1.manscan 2013-06-05 10:52:26.787092815 +0200 ++++ ./man/openipmish.1 2013-06-05 14:01:12.004559270 +0200 +@@ -26,7 +26,7 @@ Turn on message debugging, this will dum + .TP + .B \-\-drawmsg + Turn on raw message debugging, this will dump all low-level messages to +-debug log output. This differes from normal message debugging in that all ++debug log output. This differs from normal message debugging in that all + protocol messages are also dumped, not just IPMI messages. + .TP + .B \-\-dmem +@@ -34,11 +34,21 @@ Turn on memory debugging, this will caus + deallocations to be checked. When the program terminates, it will + dump all memory that was not properly freed (leaked). + .TP ++.B \-\-dmsgerr ++Turn on printing out low-level message errors. ++.TP + .B \-\-dlock + Turn on lock debugging, this will check lock operations to make sure + that locks are help in all the proper places and make sure that locks + are properly nested. + .TP ++\fB-x\fR\ ,\ \fB\-\-execute\fR\ ++Execute the given string at startup. This may be entered multiple times ++for multiple commands. ++.TP ++.B \-\-glib ++Use glib for the OS handler. ++.TP + .B \-\-snmp + Enable the SNMP trap handler. + .B openipmish +diff -up ./man/rmcp_ping.1.manscan ./man/rmcp_ping.1 +--- ./man/rmcp_ping.1.manscan 2013-06-05 10:52:59.704104189 +0200 ++++ ./man/rmcp_ping.1 2013-06-05 10:53:09.788107626 +0200 +@@ -38,7 +38,7 @@ starttag. This is zero by default + Turns on debugging to standard output. + .TP + .I destination +-The target address, default is the boradcast address (default 255.255.255.255) ++The target address, default is the broadcast address (default 255.255.255.255) + + .SH AUTHOR + .PP +diff -up ./man/solterm.1.manscan ./man/solterm.1 +--- ./man/solterm.1.manscan 2013-06-05 10:53:46.923120093 +0200 ++++ ./man/solterm.1 2013-06-05 10:55:59.442162744 +0200 +@@ -37,9 +37,9 @@ These are all described in openipmi_conp + .TP + .BI \-e\ escape_char + The character to use to escape, or exit, the program. Entering this +-chatacter right after a newline is entered causes the program to go ++character right after a newline is entered causes the program to go + into command mode. A single character after this performs a command. +-The default escape character is "~" as shown below. Suppported ++The default escape character is "~" as shown below. Supported + commands are: + .RS + .IP ~. +@@ -98,7 +98,7 @@ the SoL session. This is the default. + .TP + .BI \-holdoff + Specifies that CTS, DTR, and DSR are to be deasserted at the start of +-the SoL session so that the configuration may be modifeid before the ++the SoL session so that the configuration may be modified before the + handshake is released. + + .TP +diff -up ./sample/ipmicmd.c.manscan ./sample/ipmicmd.c +--- ./sample/ipmicmd.c.manscan 2013-06-05 13:55:04.191611230 +0200 ++++ ./sample/ipmicmd.c 2013-06-05 13:55:10.988610133 +0200 +@@ -124,6 +124,7 @@ void usage(void) + printf("%s [-k ] [-v] \n", progname); + printf("Where is one of:"); + ipmi_parse_args_iter_help(con_usage, NULL); ++ printf("\n"); + } + + char * +diff -up ./sample/rmcp_ping.c.manscan ./sample/rmcp_ping.c +--- ./sample/rmcp_ping.c.manscan 2013-06-05 15:17:40.073957820 +0200 ++++ ./sample/rmcp_ping.c 2013-06-05 14:21:05.778697883 +0200 +@@ -156,6 +156,11 @@ main(int argc, char *argv[]) + if (strcmp(argv[i], "--") == 0) { + i++; + break; ++ } else if ((strcmp(argv[i], "--help") == 0) || ++ (strcmp(argv[i], "-?") == 0) || ++ (strcmp(argv[i], "-h") == 0)) { ++ i++; ++ usage(); + } else if (strcmp(argv[i], "-p") == 0) { + i++; + if (i >= argc) { +diff -up ./sample/solterm.c.manscan ./sample/solterm.c +--- ./sample/solterm.c.manscan 2013-06-05 15:17:55.264961190 +0200 ++++ ./sample/solterm.c 2013-06-05 15:15:14.037921308 +0200 +@@ -743,7 +743,12 @@ int main(int argc, char *argv[]) + + /* Now we make sure "lan" is the first argument so we get the + right connection type... */ +- if (strcmp(argv[1], "lan") != 0) { ++ if ((strcmp(argv[1], "-h") == 0) || ++ (strcmp(argv[1], "--help") == 0) || ++ (strcmp(argv[1], "-?") == 0)) { ++ usage(); ++ exit(1); ++ } else if (strcmp(argv[1], "lan") != 0) { + fprintf(stderr, "main: %s only supports lan connections\n", + progname); + exit(1); +diff -up ./ui/basic_ui.c.manscan ./ui/basic_ui.c +--- ./ui/basic_ui.c.manscan 2013-06-04 14:08:04.538642560 +0200 ++++ ./ui/basic_ui.c 2013-06-05 11:17:41.394541158 +0200 +@@ -225,6 +225,26 @@ snmp_init(selector_t *sel) + } + #endif /* HAVE_UCDSNMP */ + ++void help(void) ++{ ++ fprintf(stdout, "ipmi_ui [ options ] smi smi-num\n"); ++ fprintf(stdout, "ipmi_ui [ oprions ] lan IP port [IP2 port2] auth priv user pass\n"); ++ fprintf(stdout, "\n"); ++ fprintf(stdout, "Options:\n"); ++ fprintf(stdout, " -c Command line mode\n"); ++ fprintf(stdout, " -dlock Lock debugging ON\n"); ++ fprintf(stdout, " -dmem Memory debugging ON\n"); ++ fprintf(stdout, " -drawmsg Raw message ON\n"); ++ fprintf(stdout, " -dmsg Dump all messages.\n"); ++#ifdef HAVE_UCDSNMP ++ fprintf(stdout, " -snmp SNMP trap handler ON\n"); ++#endif ++ fprintf(stdout, "Auth:\n"); ++ fprintf(stdout, " none | straight | md5 | md2\n"); ++ fprintf(stdout, "Priv:\n"); ++ fprintf(stdout, " callback | user | operator | admin\n"); ++} ++ + int + main(int argc, char *argv[]) + { +@@ -249,6 +269,11 @@ main(int argc, char *argv[]) + curr_arg++; + if (strcmp(arg, "--") == 0) { + break; ++ } else if (strcmp(arg, "-?") == 0 || ++ strcmp(arg, "-h") == 0 || ++ strcmp(arg, "--help") == 0) { ++ help(); ++ return(1); + } else if (strcmp(arg, "-c") == 0) { + full_screen = 0; + } else if (strcmp(arg, "-dlock") == 0) { diff --git a/SOURCES/ipmi.service b/SOURCES/ipmi.service new file mode 100644 index 0000000..fa14993 --- /dev/null +++ b/SOURCES/ipmi.service @@ -0,0 +1,12 @@ +[Unit] +Description=IPMI Driver +After=network.target + +[Service] +Type=oneshot +RemainAfterExit=yes +ExecStart=/usr/libexec/openipmi-helper start +ExecStop=/usr/libexec/openipmi-helper stop + +[Install] +WantedBy=multi-user.target diff --git a/SOURCES/openipmi-helper b/SOURCES/openipmi-helper new file mode 100644 index 0000000..4cebfb9 --- /dev/null +++ b/SOURCES/openipmi-helper @@ -0,0 +1,512 @@ +#!/bin/sh +############################################################################# +# +# ipmi: OpenIPMI Driver helper script +# +# Authors: Jan Safranek +# +# Based on IPMI init script by: +# Matt Domsch +# Chris Poblete +# +# Status return code bits +# no bits set = no errors +# bit 0 set = minimum modules aren't loaded +# bit 1 set = requested feature module isn't loaded +# bit 2 set = /dev/ipmi0 (or /dev/imb if using that instead) doesn't exist +# bit 3 set = /dev/watchdog doesn't exist +# bit 4 set = lockfile doesn't exist +# bit 5 set = modules are loaded even when asked to be unloaded + +CONFIGFILE=/etc/sysconfig/ipmi +# source config info +[ -r ${CONFIGFILE} ] && . ${CONFIGFILE} + +############################################################################# +# GLOBALS +############################################################################# +MODULE_NAME="ipmi" +INTF_NUM=0 + +IPMI_SMB_MODULE_NAME="ipmi_smb" +IPMI_SI_MODULE_NAME="ipmi_si" +kernel=`uname -r | cut -d. -f1-2` +if [ "${kernel}" == "2.4" ]; then + IPMI_SMB_MODULE_NAME="ipmi_smb_intf" + IPMI_SI_MODULE_NAME="ipmi_si_drv" +fi + +MODULES_INTERFACES="" +[ "${DEV_IPMI}" = "yes" ] && MODULES_INTERFACES="${MODULES_INTERFACES} ipmi_devintf" +[ "${IPMI_IMB}" = "yes" ] && MODULES_INTERFACES="${MODULES_INTERFACES} ipmi_imb" + +MODULES_FEATURES="" +[ "${IPMI_WATCHDOG}" = "yes" ] && MODULES_FEATURES="${MODULES_FEATURES} ipmi_watchdog" +[ "${IPMI_POWEROFF}" = "yes" ] && MODULES_FEATURES="${MODULES_FEATURES} ipmi_poweroff" + +MODULES_HW="" +[ "${IPMI_SI}" = "yes" ] && MODULES_HW="${MODULES_HW} ${IPMI_SI_MODULE_NAME}" +[ "${IPMI_SMB}" = "yes" ] && MODULES_HW="${MODULES_HW} ${IPMI_SMB_MODULE_NAME}" + +MODULES_BASE="ipmi_msghandler" +MODULES="${MODULES_INTERFACES} ${MODULES_FEATURES} ${MODULES_HW} ${MODULES_BASE}" + +RETVAL=0 +LOCKFILE=/var/lock/subsys/ipmi +DEV_IPMI_TIMEOUT=150 + +UDEV_EXISTS=0 +if [ -e /sbin/udev -o -e /sbin/udevd ]; then + UDEV_EXISTS=1 +fi + +############################################################################# +# NOTES: +# * /dev/ipmi0 is unconditionally deleted here on ipmi_devintf unload, +# because SLES9 and RHEL4 kernels don't send a message for udev to delete +# it for us. +# +############################################################################# + +modules_loaded_verbose() +{ + OnePlusLoaded=0 + OnePlusUnloaded=0 + for m in $@; do + if /sbin/lsmod | grep $m >/dev/null 2>&1 ; then + echo "$m module loaded." + OnePlusLoaded=1 + else + echo "$m module not loaded." + OnePlusUnloaded=1 + fi + done +} + +modules_loaded() +{ + OnePlusLoaded=0 + OnePlusUnloaded=0 + for m in $@; do + if /sbin/lsmod | grep $m >/dev/null 2>&1 ; then + OnePlusLoaded=1 + else + OnePlusUnloaded=1 + fi + done +} + +device_node_exists () +{ + if [ -e "$1" ]; then + echo "$1 exists." + return 1 + fi + echo "$1 does not exist." + return 0 +} + +minimum_modules_loaded() +{ + rc_base=1 + rc_hw=1 + modules_loaded_verbose "${MODULES_BASE}" + [ ${OnePlusLoaded} -eq 0 ] && rc_base=0 + + modules_loaded_verbose "${MODULES_HW}" + [ ${OnePlusLoaded} -eq 0 ] && rc_hw=0 + + return $((rc_base && rc_hw)) +} + +############################################################################# + +load_si() +{ + if [ "${IPMI_SI}" = "yes" ]; then + modprobe ${IPMI_SI_MODULE_NAME} > /dev/null 2>&1 + modules_loaded ${IPMI_SI_MODULE_NAME} + [ ${OnePlusLoaded} -ne 1 ] && RETVAL=$((RETVAL | 1)) + fi +} + +load_smb() +{ + if [ "${IPMI_SMB}" = "yes" ]; then + modprobe ${IPMI_SMB_MODULE_NAME} > /dev/null 2>&1 + modules_loaded ${IPMI_SMB_MODULE_NAME} + [ ${OnePlusLoaded} -ne 1 ] && RETVAL=$((RETVAL | 1)) + fi +} + +load_hw_modules() +{ + load_si + load_smb +} + +start_watchdog_common() +{ + load_hw_modules + modprobe ipmi_watchdog ${IPMI_WATCHDOG_OPTIONS} > /dev/null 2>&1 + modules_loaded ipmi_watchdog + [ ${OnePlusUnloaded} -ne 0 ] && + RETVAL=$((RETVAL | 2)) && + echo "Watchdog startup failed: cannot load ipmi_watchdog module" && + return + if [ ${UDEV_EXISTS} -eq 0 -a ! -e /dev/watchdog ]; then + mknod -m 0600 /dev/watchdog c 10 130 + [ $? -ne 0 ] && + RETVAL=$((RETVAL | 8)) && + echo "Watchdog startup failed: cannot create /dev/watchdog" && + return + fi +} + +start_watchdog_quiet() +{ + [ "${IPMI_WATCHDOG}" != "yes" ] && + return + start_watchdog_common +} + +start_watchdog() +{ + [ "${IPMI_WATCHDOG}" != "yes" ] && + RETVAL=$((RETVAL | 2)) && + echo "Watchdog not configured" && + return + start_watchdog_common +} + +stop_watchdog() +{ + modprobe -q -r ipmi_watchdog > /dev/null 2>&1 + modules_loaded ipmi_watchdog + if [ ${OnePlusLoaded} -ne 0 ]; then + RETVAL=$((RETVAL | 32)) + echo "Watchog shutdown failed: cannot unload ipmi_watchdog module" + else + if [ "${IPMI_WATCHDOG}" = "yes" ]; then + [ ${UDEV_EXISTS} -eq 0 ] && rm -f /dev/watchdog + fi + fi +} + +stop_watchdog_quiet() +{ + modprobe -q -r ipmi_watchdog > /dev/null 2>&1 + modules_loaded ipmi_watchdog + if [ ${OnePlusLoaded} -ne 0 ]; then + RETVAL=$((RETVAL | 32)) + else + if [ "${IPMI_WATCHDOG}" = "yes" ]; then + [ ${UDEV_EXISTS} -eq 0 ] && rm -f /dev/watchdog + fi + fi +} + +start_powercontrol_common() +{ + local poweroff_opts="" + load_hw_modules + if [ "${IPMI_POWERCYCLE}" == "yes" ]; then + modinfo ipmi_poweroff 2>/dev/null | grep poweroff_control > /dev/null 2>&1 && \ + poweroff_opts="poweroff_control=2" + modinfo ipmi_poweroff 2>/dev/null | grep poweroff_powercycle > /dev/null 2>&1 && \ + poweroff_opts="poweroff_powercycle=1" + fi + modprobe ipmi_poweroff "${poweroff_opts}" > /dev/null 2>&1 + modules_loaded ipmi_poweroff + [ ${OnePlusUnloaded} -ne 0 ] && + RETVAL=$((RETVAL | 2)) && + echo "Powercontroll startup failed: cannot load ipmi_poweroff module" && + return +} + +start_powercontrol_quiet() +{ + [ "${IPMI_POWEROFF}" != "yes" ] && + return + start_powercontrol_common +} + +start_powercontrol() +{ + [ "${IPMI_POWEROFF}" != "yes" ] && + RETVAL=$((RETVAL | 2)) && + echo "Powercontroll not configured" && + return + start_powercontrol_common +} + +stop_powercontrol() +{ + modprobe -q -r ipmi_poweroff > /dev/null 2>&1 + modules_loaded ipmi_poweroff + if [ ${OnePlusLoaded} -ne 0 ]; then + RETVAL=$((RETVAL | 32)) + echo "Powercontroll shutdown failed: cannot unload ipmi_poweroff module" + fi +} + +stop_powercontrol_quiet() +{ + modprobe -q -r ipmi_poweroff > /dev/null 2>&1 + modules_loaded ipmi_poweroff + [ ${OnePlusLoaded} -ne 0 ] && RETVAL=$((RETVAL | 32)) +} + +############################################################################# +unload_all_ipmi_modules() +{ + stop_watchdog_quiet + stop_powercontrol_quiet + for m in ${MODULES}; do + modprobe -q -r ${m} > /dev/null 2>&1 + done + # delete interface node ONLY if ipmi_devintf is unloaded + [ `lsmod | grep -c "ipmi_devintf"` -eq 0 ] && + rm -f "/dev/ipmi${INTF_NUM}" +} + +unload_ipmi_modules_leave_features() +{ + for m in ${MODULES_INTERFACES}; do + modprobe -q -r ${m} > /dev/null 2>&1 + done + # delete interface node ONLY if ipmi_devintf is unloaded + [ `lsmod | grep -c "ipmi_devintf"` -eq 0 ] && + rm -f "/dev/ipmi${INTF_NUM}" + lsmod | egrep -q "ipmi_(poweroff|watchdog)" > /dev/null 2>&1 + if [ "$?" -ne "0" ]; then + stop_watchdog_quiet + stop_powercontrol_quiet + for m in ${MODULES}; do + modprobe -q -r ${m} > /dev/null 2>&1 + done + fi +} + +############################################################################# +load_ipmi_modules () +{ + local locdelay + modprobe ipmi_msghandler > /dev/null 2>&1 + modules_loaded ipmi_msghandler + [ ${OnePlusLoaded} -ne 1 ] && unload_all_ipmi_modules && RETVAL=$((RETVAL | 1)) && return + load_hw_modules + [ $((RETVAL & 1)) -eq 1 ] && unload_all_ipmi_modules && RETVAL=$((RETVAL | 1)) && return + + if [ "${DEV_IPMI}" = "yes" ]; then + modprobe ipmi_devintf > /dev/null 2>&1 + modules_loaded ipmi_devintf + RETVAL=$((RETVAL & ~2)) + [ ${OnePlusLoaded} -eq 0 ] && RETVAL=$((RETVAL | 2)) + if [ ${OnePlusLoaded} -eq 1 ]; then + if [ ${UDEV_EXISTS} -eq 0 ]; then + DEVMAJOR=`cat /proc/devices | awk '/ipmidev/{print $1}'` + rm -f /dev/ipmi${INTF_NUM} + mknod -m 0600 /dev/ipmi${INTF_NUM} c ${DEVMAJOR} 0 || RETVAL=$((RETVAL | 4)) + fi + + # udev can take several seconds to create /dev/ipmi0, + # but it happens asynchronously, so delay here + locdelay=${DEV_IPMI_TIMEOUT} + while [ ! -e /dev/ipmi${INTF_NUM} -a ${locdelay} -gt 0 ]; do + locdelay=$((locdelay - 1)) + sleep 0.1 + done + fi + fi + + if [ "${IPMI_IMB}" = "yes" ]; then + modprobe ipmi_imb > /dev/null 2>&1 + modules_loaded ipmi_imb + RETVAL=$((RETVAL & ~2)) + [ ${OnePlusLoaded} -eq 0 ] && RETVAL=$((RETVAL | 2)) + if [ ${OnePlusLoaded} -eq 1 ]; then + DEVMAJOR=`cat /proc/devices | awk '/imb/{print $1}'` + rm -f /dev/imb + mknod -m 0600 /dev/imb c ${DEVMAJOR} 0 || RETVAL=$((RETVAL | 4)) + fi + fi + + # Per Corey Minyard, essentially no one uses ipmi_radisys + # and we don't want to encourage its further use + # so it won't be handled here. + return +} + +############################################################################# +start() +{ + load_ipmi_modules + if [ ${RETVAL} -eq 0 ]; then + touch ${LOCKFILE} + else + if [ $((RETVAL & 1)) -eq 1 ]; then + echo "Startup failed." + else + touch ${LOCKFILE} && echo "Warning!?" + fi + fi + start_watchdog_quiet + start_powercontrol_quiet +} + +############################################################################# +stop() +{ + unload_ipmi_modules_leave_features + modules_loaded ${MODULES_INTERFACES} + if [ ${OnePlusLoaded} -ne 0 ]; then + RETVAL=$((RETVAL | 32)) + echo "Shutdown failed, something may be in use" + else + rm -f ${LOCKFILE} + fi +} + +stop_all() +{ + unload_all_ipmi_modules + modules_loaded ${MODULES} + if [ ${OnePlusLoaded} -ne 0 ]; then + RETVAL=$((RETVAL | 32)) + echo "Shutdown failed, something may be in use" + else + rm -f ${LOCKFILE} + fi +} + +############################################################################# +restart() +{ + stop_all + RETVAL=0 + start +} + +############################################################################# + +reload() +{ + stop_all + RETVAL=0 + start +} + +############################################################################# + +status_all() +{ + minimum_modules_loaded + [ $? -eq 0 ] && RETVAL=$((RETVAL | 1)) + + modules_loaded_verbose ${MODULES_FEATURES} ${MODULES_INTERFACES} + [ ${OnePlusUnloaded} -ne 0 ] && RETVAL=$((RETVAL | 2)) + + if [ "${DEV_IPMI}" = "yes" ]; then + device_node_exists /dev/ipmi${INTF_NUM} + [ $? -eq 0 ] && RETVAL=$((RETVAL | 4)) + fi + + if [ "${IPMI_IMB}" = "yes" ]; then + device_node_exists /dev/imb + [ $? -eq 0 ] && RETVAL=$((RETVAL | 4)) + fi + + if [ "${IPMI_WATCHDOG}" = "yes" ]; then + device_node_exists /dev/watchdog + [ $? -eq 0 ] && RETVAL=$((RETVAL | 8)) + fi + + [ ! -e ${LOCKFILE} ] && RETVAL=$((RETVAL | 16)) +} + +status() +{ + minimum_modules_loaded + [ $? -eq 0 ] && RETVAL=$((RETVAL | 1)) + + if [ "${DEV_IPMI}" = "yes" ]; then + modules_loaded_verbose ipmi_devintf + [ ${OnePlusLoaded} -eq 0 ] && RETVAL=$((RETVAL | 2)) + + device_node_exists /dev/ipmi${INTF_NUM} + [ $? -eq 0 ] && RETVAL=$((RETVAL | 4)) + fi + + if [ "${IPMI_IMB}" = "yes" ]; then + device_node_exists /dev/imb + [ $? -eq 0 ] && RETVAL=$((RETVAL | 4)) + fi +} + +status_watchdog() +{ + minimum_modules_loaded + [ $? -eq 0 ] && RETVAL=$((RETVAL | 1)) + + modules_loaded_verbose ipmi_watchdog + [ ${OnePlusLoaded} -eq 0 ] && RETVAL=$((RETVAL | 2)) + + device_node_exists /dev/watchdog + [ $? -eq 0 ] && RETVAL=$((RETVAL | 8)) +} + +status_powercontrol() +{ + minimum_modules_loaded + [ $? -eq 0 ] && RETVAL=$((RETVAL | 1)) + + modules_loaded_verbose ipmi_powercontrol + [ ${OnePlusLoaded} -eq 0 ] && RETVAL=$((RETVAL | 2)) +} + +############################################################################# +usage () +{ + echo $"Usage: $0 {start|stop|status" 1>&2 + echo $" restart|condrestart|try-restart|reload|force-reload" 1>&2 + echo $" start-watchdog|stop-watchdog|status-watchdog" 1>&2 + echo $" start-powercontrol|stop-powercontrol|status-powercontrol" 1>&2 + echo $" stop-all|status-all}" 1>&2 + RETVAL=2 +} + +condrestart () +{ + [ -e ${LOCKFILE} ] && restart +} + +############################################################################# +# MAIN +############################################################################# +case "$1" in + start) start ;; + stop) stop ;; + restart) restart ;; + force-reload) reload ;; + reload) reload ;; + status) status ;; + status-all) status_all ;; + condrestart) condrestart ;; + try-restart) condrestart ;; + start-watchdog) start_watchdog ;; + stop-watchdog) stop_watchdog ;; + status-watchdog) status_watchdog ;; + start-powercontrol) start_powercontrol ;; + stop-powercontrol) stop_powercontrol ;; + status-powercontrol) status_powercontrol ;; + stop-all) stop_all ;; + *) usage ;; +esac + +exit ${RETVAL} + +############################################################################# +# end of file +############################################################################# + diff --git a/SOURCES/openipmi.modalias b/SOURCES/openipmi.modalias new file mode 100644 index 0000000..5f635ac --- /dev/null +++ b/SOURCES/openipmi.modalias @@ -0,0 +1,10 @@ +# +# This configuration file was provided +# by OpenIPMI-modalias package. +# Feel free to update as needed. +# + +alias IPI0001 ipmi_si +alias IPI0001 ipmi_devintf +alias IPI0001 ipmi_msghandler + diff --git a/SOURCES/openipmi.sysconf b/SOURCES/openipmi.sysconf new file mode 100644 index 0000000..715c6e4 --- /dev/null +++ b/SOURCES/openipmi.sysconf @@ -0,0 +1,68 @@ +## Path: Hardware/IPMI +## Description: Enable standard hardware interfaces (KCS, BT, SMIC) +## Type: yesno +## Default: "yes" +## Config: ipmi +# Enable standard hardware interfaces (KCS, BT, SMIC) +# You probably want this enabled. +IPMI_SI=yes + +## Path: Hardware/IPMI +## Description: Enable /dev/ipmi0 interface, used by ipmitool, ipmicmd, +## Type: yesno +## Default: "yes" +## Config: ipmi +# Enable /dev/ipmi0 interface, used by ipmitool, ipmicmd, +# and other userspace IPMI-using applications. +# You probably want this enabled. +DEV_IPMI=yes + +## Path: Hardware/IPMI +## Description: Enable IPMI_WATCHDOG if you want the IPMI watchdog +## Type: yesno +## Default: "no" +## Config: ipmi +# Enable IPMI_WATCHDOG if you want the IPMI watchdog +# to reboot the system if it hangs +IPMI_WATCHDOG=no + +## Path: Hardware/IPMI +## Description: Watchdog options - modinfo ipmi_watchdog for details +## Type: string +## Default: "timeout=60" +## Config: ipmi +# Watchdog options - modinfo ipmi_watchdog for details +# watchdog timeout value in seconds +# as there is no userspace ping application that runs during shutdown, +# be sure to give it enough time for any device drivers to +# do their cleanup (e.g. megaraid cache flushes) +# without the watchdog triggering prematurely +IPMI_WATCHDOG_OPTIONS="timeout=60" + +## Path: Hardware/IPMI +## Description: Enable IPMI_POWEROFF if you want the IPMI poweroff module to be loaded. +## Type: yesno +## Default: "no" +## Config: ipmi +# Enable IPMI_POWEROFF if you want the IPMI +# poweroff module to be loaded. +IPMI_POWEROFF=no + +## Path: Hardware/IPMI +## Description: Enable IPMI_POWERCYCLE if you want the system to be power-cycled on reboot +## Type: yesno +## Default: "no" +## Config: ipmi +# Enable IPMI_POWERCYCLE if you want the system to be power-cycled (power +# down, delay briefly, power on) rather than power off, on systems +# that support such. IPMI_POWEROFF=yes is also required. +IPMI_POWERCYCLE=no + +## Path: Hardware/IPMI +## Description: Enable "legacy" interfaces for applications +## Type: yesno +## Default: "no" +## Config: ipmi +# Enable "legacy" interfaces for applications +# Intel IMB driver interface +IPMI_IMB=no diff --git a/SPECS/OpenIPMI.spec b/SPECS/OpenIPMI.spec new file mode 100644 index 0000000..c50405e --- /dev/null +++ b/SPECS/OpenIPMI.spec @@ -0,0 +1,516 @@ +%global _hardened_build 1 +# TODO: uses private copy of libedit, should be modified to use system one + +%{!?python_sitearch: %global python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; print get_python_lib(1)")} +Summary: IPMI (Intelligent Platform Management Interface) library and tools +Name: OpenIPMI +Version: 2.0.19 +Release: 7%{?dist} +License: LGPLv2+ and GPLv2+ or BSD +Group: System Environment/Base +URL: http://sourceforge.net/projects/openipmi/ +Source: http://downloads.sourceforge.net/openipmi/%{name}-%{version}.tar.gz +Source1: openipmi.sysconf +Source2: openipmi-helper +Source3: ipmi.service +Source4: openipmi.modalias +BuildRequires: gdbm-devel swig glib2-devel net-snmp-devel ncurses-devel +BuildRequires: openssl-devel python-devel perl-devel tcl-devel tkinter +BuildRequires: desktop-file-utils +BuildRequires: systemd-units + +# aarch64 workaround remove once released package's config.sub contains aarch64 +BuildRequires: automake +BuildRequires: autoconf +BuildRequires: libtool +# aarch64 end + +Requires(post): systemd-units +Requires(preun): systemd-units +Requires(postun): systemd-units +Requires(post): systemd-sysv +Requires:%{name}-libs = %{version}-%{release} + +Patch1: OpenIPMI-2.0.18-pthread-pkgconfig.patch +Patch2: OpenIPMI-2.0.19-man.patch + +%description +The Open IPMI project aims to develop an open code base to allow access to +platform information using Intelligent Platform Management Interface (IPMI). +This package contains the tools of the OpenIPMI project. + +%package modalias +Group: System Environment/Kernel +Summary: Module aliases for IPMI subsystem + +%description modalias +The OpenIPMI-modalias provides configuration file with module aliases +of ACPI and PNP wildcards. + +%package libs +Group: Development/Libraries +Summary: The OpenIPMI runtime libraries +Requires:%{name}-modalias = %{version}-%{release} + +%description libs +The OpenIPMI-libs package contains the runtime libraries for shared binaries +and applications. + +%package perl +Group: Development/Libraries +Summary: IPMI Perl language bindings +Requires: perl(:MODULE_COMPAT_%(eval "`%{__perl} -V:version`"; echo $version)) +Requires: %{name}-libs = %{version}-%{release} + +%description perl +The OpenIPMI-perl package contains the Perl language bindings for OpenIPMI. + +%package python +Group: Development/Libraries +Summary: IPMI Python language bindings +Requires: %{name}-libs = %{version}-%{release} + +%description python +The OpenIPMI-python package contains the Python language bindings for OpenIPMI. + +%package devel +Group: Development/Libraries +Summary: The development environment for the OpenIPMI project +Requires: pkgconfig +Requires: %{name} = %{version}-%{release} +Requires: %{name}-libs = %{version}-%{release} + +%description devel +The OpenIPMI-devel package contains the development libraries and header files +of the OpenIPMI project. + +%prep +%setup -q +%patch1 -p1 -b .pthread +%patch2 -p1 -b .manscan + +%build +export CFLAGS="-fPIC $RPM_OPT_FLAGS -fno-strict-aliasing" + +# aarch64 workaround remove once released package's config.sub contains aarch64 +%{__libtoolize} --copy --force --automake +%{__aclocal} +%{__autoheader} +%{__automake} --add-missing --copy --foreign --force-missing +%{__autoconf} +# aarch64 end + +%configure \ + --with-pythoninstall=%{python_sitearch} \ + --disable-dependency-tracking \ + --with-tcl=no \ + --disable-static \ + --with-tkinter=no + +# https://fedoraproject.org/wiki/Packaging:Guidelines?rd=Packaging/Guidelines#Beware_of_Rpath +# get rid of rpath still present in OpenIPMI-perl package +sed -i 's|^hardcode_libdir_flag_spec=.*|hardcode_libdir_flag_spec=""|g' libtool +sed -i 's|^runpath_var=LD_RUN_PATH|runpath_var=DIE_RPATH_DIE|g' libtool + +make # not %{?_smp_mflags} safe + +%install +make install DESTDIR=$RPM_BUILD_ROOT +rm -rf $RPM_BUILD_ROOT/%{_libdir}/*.la + +install -d ${RPM_BUILD_ROOT}%{_sysconfdir}/sysconfig +install -m 644 %SOURCE1 ${RPM_BUILD_ROOT}%{_sysconfdir}/sysconfig/ipmi +install -d ${RPM_BUILD_ROOT}%{_libexecdir} +install -m 755 %SOURCE2 ${RPM_BUILD_ROOT}%{_libexecdir}/openipmi-helper +install -d ${RPM_BUILD_ROOT}%{_unitdir} +install -m 644 %SOURCE3 ${RPM_BUILD_ROOT}%{_unitdir}/ipmi.service +install -d ${RPM_BUILD_ROOT}%{_sysconfdir}/modprobe.d +install -m 644 %SOURCE4 ${RPM_BUILD_ROOT}%{_sysconfdir}/modprobe.d/OpenIPMI.conf + +rm ${RPM_BUILD_ROOT}/%{_mandir}/man1/openipmigui.1 + +# add missing documentation symlinks +if test -L ${RPM_BUILD_ROOT}/%{_bindir}/ipmicmd && ! test -a ${RPM_BUILD_ROOT}/%{_mandir}/man1/ipmicmd.1.gz ; then + %{__ln_s} openipmicmd.1.gz ${RPM_BUILD_ROOT}/%{_mandir}/man1/ipmicmd.1.gz +fi + +if test -L ${RPM_BUILD_ROOT}/%{_bindir}/ipmish && ! test -a ${RPM_BUILD_ROOT}/%{_mandir}/man1/ipmish.1.gz ; then + %{__ln_s} openipmish.1.gz ${RPM_BUILD_ROOT}/%{_mandir}/man1/ipmish.1.gz +fi + +%post +%systemd_post ipmi.service + +%preun +%systemd_preun ipmi.service + +%postun +%systemd_postun_with_restart ipmi.service + +%post libs -p /sbin/ldconfig + +%postun libs -p /sbin/ldconfig + +### A sysv => systemd migration contains all of the same scriptlets as a +### systemd package. These are additional scriptlets + +%triggerun -- OpenIPMI < 2.0.18-14 +# Save the current service runlevel info +# User must manually run systemd-sysv-convert --apply httpd +# to migrate them to systemd targets +/usr/bin/systemd-sysv-convert --save ipmi >/dev/null 2>&1 ||: +/bin/systemctl --no-reload enable ipmi.service >/dev/null 2>&1 ||: +# Run these because the SysV package being removed won't do them +/sbin/chkconfig --del ipmi >/dev/null 2>&1 || : +/bin/systemctl try-restart ipmi.service >/dev/null 2>&1 || : + +%files +%doc CONFIGURING_FOR_LAN COPYING COPYING.BSD COPYING.LIB FAQ README README.Force README.MotorolaMXP +%config(noreplace) %{_sysconfdir}/sysconfig/ipmi +%{_libexecdir}/openipmi-helper +%{_bindir}/ipmicmd +%{_bindir}/ipmilan +%{_bindir}/ipmish +%{_bindir}/ipmi_ui +%{_bindir}/openipmicmd +%{_bindir}/openipmish +%{_bindir}/rmcp_ping +%{_bindir}/solterm +%{_unitdir}/ipmi.service +%{_mandir}/man1/ipmi_ui* +%{_mandir}/man1/openipmicmd* +%{_mandir}/man1/openipmish* +%{_mandir}/man1/rmcp_ping* +%{_mandir}/man1/solterm* +%{_mandir}/man1/ipmish* +%{_mandir}/man1/ipmicmd* +%{_mandir}/man7/ipmi_cmdlang* +%{_mandir}/man7/openipmi_conparms* +%{_mandir}/man8/ipmilan* + +%files perl +%attr(644,root,root) %{perl_vendorarch}/OpenIPMI.pm +%{perl_vendorarch}/auto/OpenIPMI/ + +%files python +%{python_sitearch}/*OpenIPMI* + +%files libs +%{_libdir}/*.so.* + +%files devel +%{_includedir}/OpenIPMI +%{_libdir}/*.so +%{_libdir}/pkgconfig/*.pc + +%files modalias +%config(noreplace) %{_sysconfdir}/modprobe.d/OpenIPMI.conf + +%changelog +* Fri Jul 19 2013 Ledvinka Ales - 2.0.19-7 +- Hint compilation to avoid strict aliasing and prevent type-punned pointer issues. +- Fix rPath regression for OpenIPMI-perl library. + +* Wed Jul 17 2013 Petr Pisar - 2.0.19-6 +- Perl 5.18 rebuild + +* Tue Jun 4 2013 Ledvinka Ales - 2.0.19-5 +- Support aarch64 by replicating release toolchain. +- Configuration subpackage with kernel probed wildcard module aliases. + as workaround for bz#961878 and fesco#1110 +- Man pages symlinks same as bin symlinks. +- ipmi_ui command help argument. +- ipmilan missing options. +- Fixed build requirements. + +* Thu Apr 25 2013 Ledvinka Ales - 2.0.19-4 +- rpmdiff fixes + +* Wed Feb 13 2013 Fedora Release Engineering - 2.0.19-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild + +* Mon Aug 27 2012 Jan Safranek - 2.0.19-2 +- Updated RPM scriptlets with latest systemd-rpm macros (#850246) +- Fixed fedora-review tool complaints + +* Wed Aug 8 2012 Jan Safranek - 2.0.19-1 +- Update to 2.0.19 + +* Wed Jul 18 2012 Fedora Release Engineering - 2.0.18-16 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild + +* Mon Jun 11 2012 Petr Pisar - 2.0.18-15 +- Perl 5.16 rebuild + +* Mon May 7 2012 Jan Safranek - 2.0.18-14 +- Added ipmi systemd unit + +* Thu Jan 12 2012 Fedora Release Engineering - 2.0.18-13 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild + +* Thu Jul 21 2011 Petr Sabata - 2.0.18-12 +- Perl mass rebuild + +* Wed Jul 20 2011 Petr Sabata - 2.0.18-11 +- Perl mass rebuild + +* Fri Jul 8 2011 Jan Safranek - 2.0.18-10 +- Rebuilt for new Net-SNMP + +* Fri Jun 17 2011 Marcela Mašláňová - 2.0.18-9 +- Perl mass rebuild + +* Fri Jun 10 2011 Marcela Mašláňová - 2.0.18-8 +- Perl 5.14 mass rebuild + +* Mon Feb 07 2011 Fedora Release Engineering - 2.0.18-7 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild + +* Mon Nov 1 2010 Jan Safranek - 2.0.18-6 +- Removed the openipmigui tool, it does not work with TCL without thread + support (#646184) + +* Tue Oct 26 2010 Jan Safranek - 2.0.18-5 +- Rebuilt for new Net-SNMP + +* Wed Jul 21 2010 David Malcolm - 2.0.18-4 +- Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild + +* Thu Jul 8 2010 Jan Safranek - 2.0.18-3 +- added lincense files to OpenIPMI-libs subpackage as requested by + Fedora Licensing Guidelines + +* Tue Jun 01 2010 Marcela Maslanova - 2.0.18-2 +- Mass rebuild with perl-5.12.0 + +* Wed May 5 2010 Jan Safranek - 2.0.18-1 +- updated to OpenIPMI-2.0.18 +- fixed OpenIPMIpthread pkgconfig file (#468067) + +* Mon May 3 2010 Jan Safranek - 2.0.17-1 +- updated to OpenIPMI-2.0.17 + +* Thu Mar 18 2010 Jan Safranek - 2.0.16-12 +- implemented mandatory 'force-reload' command in ipmi service + +* Thu Mar 11 2010 Jan Safranek - 2.0.16-11 +- rebuild against new gdbm + +* Wed Mar 3 2010 Jan Safranek - 2.0.16-10 +- add README.initscript describing /etc/init.d/ipmi initscript exit codes + (#562151) + +* Mon Feb 22 2010 Jan Safranek - 2.0.16-9 +- fix package License: field, there *are* sources with BSD header +- distribute README files and COPYING in package + +* Tue Jan 5 2010 Jan Safranek - 2.0.16-8 +- fix package License: field, there is no source with BSD header + +* Mon Dec 7 2009 Stepan Kasal - 2.0.16-7 +- rebuild against perl 5.10.1 + +* Tue Dec 1 2009 Jan Safranek - 2.0.16-6 +- fix package compilation to remove rpmlint errors + +* Wed Sep 30 2009 Jan Safranek - 2.0.16-5 +- rebuilt with new net-snmp + +* Fri Aug 21 2009 Tomas Mraz - 2.0.16-4 +- rebuilt with new openssl + +* Fri Jul 24 2009 Fedora Release Engineering - 2.0.16-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild + +* Wed Apr 15 2009 Jan Safranek - 2.0.16-2 +- fix compilation flags, debuginfo package is correctly generated now + +* Thu Mar 19 2009 Jan Safranek - 2.0.16-1 +- new upstream release + +* Mon Feb 23 2009 Fedora Release Engineering - 2.0.14-11 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild + +* Sat Jan 17 2009 Tomas Mraz - 2.0.14-10 +- rebuild with new openssl + +* Thu Dec 11 2008 Jan Safranek - 2.0.14-9 +- fix linking without rpath, prelink won't screw up the libraries + anymore (#475265) + +* Wed Dec 10 2008 Jan Safranek - 2.0.14-8 +- shorter probe interval is used in init script, making the service startup + quicker in most situations (#475101) + +* Sat Nov 29 2008 Ignacio Vazquez-Abrams - 2.0.14-7 +- Rebuild for Python 2.6 + +* Thu Oct 30 2008 Jan Safranek - 2.0.14-6 +- removed static libraries from the -devel subpackage +- fixed openipmigui.desktop file + +* Thu Oct 23 2008 Jan Safranek - 2.0.14-5 +- fixed typos in the descriptions +- added .desktop file for openipmigui tool + +* Mon Oct 20 2008 Jan Safranek - 2.0.14-4 +- fixed description of the package + +* Thu Oct 16 2008 Jan Safranek - 2.0.14-3 +- split ipmitool to separate package +- added 'reload' functionality to init script +- added seraparate -gui subpackage + +* Wed Jul 30 2008 Phil Knirsch - 2.0.14-2 +- Fixed rpath problem in libOpenIPMIposix.so.0.0.1 + +* Tue Jul 29 2008 Phil Knirsch - 2.0.14-1 +- Fixed several specfile problems (#453751) +- Update to OpenIPMI-2.0.14 + +* Tue Feb 19 2008 Fedora Release Engineering - 2.0.13-2 +- Autorebuild for GCC 4.3 + +* Wed Dec 05 2007 Phil Knirsch - 2.0.13-1 +- Updated to OpenIPMI-2.0.13 +- Rebuild due to new openssl + +* Wed Oct 10 2007 Phil Knirsch - 2.0.11-3 +- Added missing perl-devel buildrequires + +* Mon Sep 24 2007 Phil Knirsch - 2.0.11-2 +- Added missing popt-devel buildrequires + +* Fri Aug 17 2007 Phil Knirsch - 2.0.11-2 +- Fix rebuild problems due to glibc change +- License review and fixes + +* Tue Apr 24 2007 Phil Knirsch - 2.0.11-1 +- Update to OpenIPMI-2.0.11 + +* Tue Feb 27 2007 Phil Knirsch - 2.0.6-8 +- Update for ipmitool-1.8.9 + +* Thu Dec 7 2006 Jeremy Katz - 2.0.6-7 +- rebuild for python 2.5 + +* Tue Nov 28 2006 Phil Knirsch - 2.0.6-6.fc7 +- Update due to new net-snmp-5.4 +- Some specfile updates + +* Tue Jul 18 2006 Phil Knirsch - 2.0.6-5 +- Fixed check for udev in initscript (#197956) + +* Wed Jul 12 2006 Jesse Keating - 2.0.6-4.1 +- rebuild + +* Fri Jun 16 2006 Bill Nottingham 2.0.6-4 +- don't include + +* Fri Jun 16 2006 Jon Masters 2.0.6-3 +- Fix a build requires (needs glibc-kernheaders) + +* Thu Jun 15 2006 Jesse Keating 2.0.6-2 +- Bump for new glib2 + +* Tue May 16 2006 Phil Knirsch 2.0.6-1 +- Fixed bug with type conversion in ipmitool (#191091) +- Added python bindings +- Split off perl and python bindings in separate subpackages +- Dropped obsolete patches +- Added missing buildprereq on readline-devel +- Made it install the python bindings properly on 64bit archs + +* Mon May 15 2006 Phil Knirsch +- Updated ipmitool to 1.8.8 +- Updated OpenIPMI to 2.0.6 + +* Fri Feb 17 2006 Phil Knirsch 1.4.14-19 +- Added missing PreReq for chkconfig + +* Mon Feb 13 2006 Jesse Keating - 1.4.14-18.2.1 +- rebump for build order issues during double-long bump + +* Fri Feb 10 2006 Jesse Keating - 1.4.14-18.2 +- bump again for double-long bug on ppc(64) + +* Tue Feb 07 2006 Jesse Keating - 1.4.14-18.1 +- rebuilt for new gcc4.1 snapshot and glibc changes + +* Mon Feb 06 2006 Phil Knirsch 1.4.14-18 +- Updated ipmitool to latest upstream version. +- Removed 3 patches for already fixed bugs in latest ipmitool. +- Adapted warning message fix for ipmitool for latest version. + +* Tue Jan 24 2006 Phil Knirsch 1.4.14-17 +- Fixed some minor things in initscripts. + +* Mon Jan 09 2006 Phil Knirsch 1.4.14-16 +- Included FRU fix for displaying FRUs with ipmitool +- Included patch for new option to specify a BMC password for IPMI 2.0 sessions + +* Tue Jan 03 2006 Radek Vokal 1.4.14-15 +- Rebuilt against new libnetsnmp + +* Fri Dec 09 2005 Jesse Keating +- rebuilt + +* Wed Nov 23 2005 Phil Knirsch 1.4.14-14 +- Some more initscript and sysconfig updates from Dell. + +* Wed Nov 09 2005 Phil Knirsch 1.4.14-13 +- Rebuilt to link against latest openssl libs. +- Fixed ipmitool not setting session privilege level (#172312) + +* Wed Nov 02 2005 Phil Knirsch 1.4.14-11 +- Rebuild to link against new net-snmp libs. + +* Tue Oct 11 2005 Phil Knirsch 1.4.14-10 +- Updated initscript to fix missing redhat-lsb bug (#169901) + +* Thu Sep 08 2005 Phil Knirsch 1.4.14-9 +- Another update to latest initscripts from Dell +- Fixed some missing return statements for non-void functions (#164138) + +* Thu Sep 01 2005 Phil Knirsch 1.4.14-8 +- Updated initscript to latest version from Dell + +* Fri Aug 12 2005 Phil Knirsch 1.4.14-7 +- Fixed the unwanted output of failed module loading of the initscript. Behaves + now like all our other initscripts (#165476) + +* Fri Aug 05 2005 Phil Knirsch 1.4.14-6 +- Fixed build problem on 64bit machines + +* Fri Jul 15 2005 Phil Knirsch 1.4.14-5 +- Fixed missing change to not autostart in the initscript + +* Wed Jul 06 2005 Phil Knirsch 1.4.14-4 +- Made the initscript a replacing configfile + +* Mon Jul 04 2005 Phil Knirsch 1.4.14-3 +- Updated versions of the initscripts and sysconf files +- Fixed typo in preun script and changelog + +* Mon Jun 27 2005 Phil Knirsch 1.4.14-2 +- Updated to OpenIPMI-1.4.14 +- Split the main package into normal and libs package for multilib support +- Added ipmitool-1.8.2 to OpenIPMI and put it in tools package +- Added sysconf and initscript (#158270) +- Fixed oob subscripts (#149142) + +* Wed Mar 30 2005 Phil Knirsch 1.4.11-5 +- Correctly put libs in the proper packages + +* Thu Mar 17 2005 Phil Knirsch 1.4.11-4 +- gcc4 rebuild fixes +- Added missing gdbm-devel buildprereq + +* Wed Mar 02 2005 Phil Knirsch 1.4.11-3 +- bump release and rebuild with gcc 4 + +* Tue Feb 08 2005 Karsten Hopp 1.4.11-2 +- update + +* Tue Oct 26 2004 Phil Knirsch +- Initial version