From 6acd45ea32722f876bb567ab77e05c6a76a1daed Mon Sep 17 00:00:00 2001 From: Cole Robinson Date: Jul 17 2019 22:45:07 +0000 Subject: Update to qemu-4.1.0-rc1 --- diff --git a/.gitignore b/.gitignore index dfcc152..7db113e 100644 --- a/.gitignore +++ b/.gitignore @@ -32,3 +32,4 @@ /qemu-4.0.0-rc3.tar.xz /qemu-4.0.0.tar.xz /qemu-4.1.0-rc0.tar.xz +/qemu-4.1.0-rc1.tar.xz diff --git a/0002-docs-bitmaps-use-QMP-lexer-instead-of-json.patch b/0002-docs-bitmaps-use-QMP-lexer-instead-of-json.patch deleted file mode 100644 index 24d69d6..0000000 --- a/0002-docs-bitmaps-use-QMP-lexer-instead-of-json.patch +++ /dev/null @@ -1,274 +0,0 @@ -From f5068276729f5c3288ebd9cc29f18e9e04f643c9 Mon Sep 17 00:00:00 2001 -From: John Snow -Date: Wed, 10 Jul 2019 15:08:07 -0400 -Subject: [PATCH] docs/bitmaps: use QMP lexer instead of json - -The annotated style json we use in QMP documentation is not strict json -and depending on the version of Sphinx (2.0+) or Pygments installed, -might cause the build to fail. - -Use the new QMP lexer. - -Further, some versions of Sphinx can not apply custom lexers to "code" -directives and require the use of "code-block" directives instead, so -make that change at this time as well. - -Tested under: -- Sphinx 1.3.6 and Pygments 2.4 -- Sphinx 1.7.6 and Pygments 2.2 (Fedora 29 packages) -- Sphinx 2.0.1 and Pygments 2.4 -- Sphinx 3.0.0+/f396b3a783 and Pygments 2.4 (From Sphinx git c4f44bdd) - -Reported-by: Aarushi Mehta -Signed-off-by: John Snow -Reviewed-by: Eduardo Habkost -Message-id: 20190603214653.29369-4-jsnow@redhat.com -Signed-off-by: John Snow -(cherry picked from commit a7786bfb0effe0b4b0fc61d8a8cd307c0b739ed7) ---- - docs/interop/bitmaps.rst | 54 ++++++++++++++++++++-------------------- - 1 file changed, 27 insertions(+), 27 deletions(-) - -diff --git a/docs/interop/bitmaps.rst b/docs/interop/bitmaps.rst -index 510e8809a9..cf308f197b 100644 ---- a/docs/interop/bitmaps.rst -+++ b/docs/interop/bitmaps.rst -@@ -199,7 +199,7 @@ persistence, and recording state can be adjusted at creation time. - - to create a new, actively recording persistent bitmap: - -- .. code:: json -+ .. code-block:: QMP - - -> { "execute": "block-dirty-bitmap-add", - "arguments": { -@@ -220,7 +220,7 @@ persistence, and recording state can be adjusted at creation time. - To create a new, disabled (``-recording``), transient bitmap that tracks - changes in 32KiB segments: - -- .. code:: json -+ .. code-block:: QMP - - -> { "execute": "block-dirty-bitmap-add", - "arguments": { -@@ -254,7 +254,7 @@ Deletes a bitmap. Bitmaps that are ``+busy`` cannot be removed. - - Remove a bitmap named ``bitmap0`` from node ``drive0``: - -- .. code:: json -+ .. code-block:: QMP - - -> { "execute": "block-dirty-bitmap-remove", - "arguments": { -@@ -280,7 +280,7 @@ Clears all dirty bits from a bitmap. ``+busy`` bitmaps cannot be cleared. - - Clear all dirty bits from bitmap ``bitmap0`` on node ``drive0``: - -- .. code:: json -+ .. code-block:: QMP - - -> { "execute": "block-dirty-bitmap-clear", - "arguments": { -@@ -309,7 +309,7 @@ begin being recorded. ``+busy`` bitmaps cannot be enabled. - - To set ``+recording`` on bitmap ``bitmap0`` on node ``drive0``: - -- .. code:: json -+ .. code-block:: QMP - - -> { "execute": "block-dirty-bitmap-enable", - "arguments": { -@@ -347,7 +347,7 @@ writes to begin being ignored. ``+busy`` bitmaps cannot be disabled. - - To set ``-recording`` on bitmap ``bitmap0`` on node ``drive0``: - -- .. code:: json -+ .. code-block:: QMP - - -> { "execute": "block-dirty-bitmap-disable", - "arguments": { -@@ -393,7 +393,7 @@ in any one source bitmap, the target bitmap will mark that segment dirty. - ``drive0``. If ``new_bitmap`` was empty prior to this command, this achieves - a copy. - -- .. code:: json -+ .. code-block:: QMP - - -> { "execute": "block-dirty-bitmap-merge", - "arguments": { -@@ -424,7 +424,7 @@ attached to nodes serving as the root for guest devices. - API. This result highlights a bitmap ``bitmap0`` attached to the root node of - device ``drive0``. - -- .. code:: json -+ .. code-block:: QMP - - -> { - "execute": "query-block", -@@ -562,7 +562,7 @@ new, empty bitmap that records writes from this point in time forward. - destination. These writes will be recorded in the bitmap - accordingly. - --.. code:: json -+.. code-block:: QMP - - -> { - "execute": "transaction", -@@ -650,7 +650,7 @@ Example: Resetting an Incremental Backup Anchor Point - If we want to start a new backup chain with an existing bitmap, we can also - use a transaction to reset the bitmap while making a new full backup: - --.. code:: json -+.. code-block:: QMP - - -> { - "execute": "transaction", -@@ -730,7 +730,7 @@ Example: First Incremental Backup - - #. Issue an incremental backup command: - -- .. code:: json -+ .. code-block:: QMP - - -> { - "execute": "drive-backup", -@@ -788,7 +788,7 @@ Example: Second Incremental Backup - #. Issue a new incremental backup command. The only difference here is that we - have changed the target image below. - -- .. code:: json -+ .. code-block:: QMP - - -> { - "execute": "drive-backup", -@@ -869,7 +869,7 @@ image: - #. Issue a new incremental backup command. Apart from the new destination - image, there is no difference from the last two examples. - -- .. code:: json -+ .. code-block:: QMP - - -> { - "execute": "drive-backup", -@@ -932,7 +932,7 @@ point in time. - - #. Create a full (anchor) backup for each drive, with accompanying bitmaps: - -- .. code:: json -+ .. code-block:: QMP - - -> { - "execute": "transaction", -@@ -1018,7 +1018,7 @@ point in time. - - #. Issue a multi-drive incremental push backup transaction: - -- .. code:: json -+ .. code-block:: QMP - - -> { - "execute": "transaction", -@@ -1121,7 +1121,7 @@ described above. This example demonstrates the single-job failure case: - - #. Attempt to create an incremental backup via QMP: - -- .. code:: json -+ .. code-block:: QMP - - -> { - "execute": "drive-backup", -@@ -1139,7 +1139,7 @@ described above. This example demonstrates the single-job failure case: - - #. Receive a pair of events indicating failure: - -- .. code:: json -+ .. code-block:: QMP - - <- { - "timestamp": {...}, -@@ -1175,7 +1175,7 @@ described above. This example demonstrates the single-job failure case: - #. Retry the command after fixing the underlying problem, such as - freeing up space on the backup volume: - -- .. code:: json -+ .. code-block:: QMP - - -> { - "execute": "drive-backup", -@@ -1193,7 +1193,7 @@ described above. This example demonstrates the single-job failure case: - - #. Receive confirmation that the job completed successfully: - -- .. code:: json -+ .. code-block:: QMP - - <- { - "timestamp": {...}, -@@ -1233,7 +1233,7 @@ and one succeeds: - - #. Issue the transaction to start a backup of both drives. - -- .. code:: json -+ .. code-block:: QMP - - -> { - "execute": "transaction", -@@ -1267,13 +1267,13 @@ and one succeeds: - #. Receive notice that the Transaction was accepted, and jobs were - launched: - -- .. code:: json -+ .. code-block:: QMP - - <- { "return": {} } - - #. Receive notice that the first job has completed: - -- .. code:: json -+ .. code-block:: QMP - - <- { - "timestamp": {...}, -@@ -1289,7 +1289,7 @@ and one succeeds: - - #. Receive notice that the second job has failed: - -- .. code:: json -+ .. code-block:: QMP - - <- { - "timestamp": {...}, -@@ -1365,7 +1365,7 @@ applied: - - #. Issue the multi-drive incremental backup transaction: - -- .. code:: json -+ .. code-block:: QMP - - -> { - "execute": "transaction", -@@ -1401,13 +1401,13 @@ applied: - - #. Receive notice that the Transaction was accepted, and jobs were launched: - -- .. code:: json -+ .. code-block:: QMP - - <- { "return": {} } - - #. Receive notification that the backup job for ``drive1`` has failed: - -- .. code:: json -+ .. code-block:: QMP - - <- { - "timestamp": {...}, -@@ -1434,7 +1434,7 @@ applied: - - #. Receive notification that the job for ``drive0`` has been cancelled: - -- .. code:: json -+ .. code-block:: QMP - - <- { - "timestamp": {...} diff --git a/qemu.spec b/qemu.spec index 8bc1c8b..ebdcb1d 100644 --- a/qemu.spec +++ b/qemu.spec @@ -138,7 +138,7 @@ %{obsoletes_block_rbd} # Release candidate version tracking -%global rcver rc0 +%global rcver rc1 %if 0%{?rcver:1} %global rcrel .%{rcver} %global rcstr -%{rcver} @@ -175,8 +175,6 @@ Source21: 95-kvm-ppc64-memlock.conf # Fix rawhide build (bz #1718926) # Not upstream, some mailing list patches have been proposed Patch0001: 0001-NOT-UPSTREAM-Build-fix-with-latest-kernel.patch -# Fix for docs building -Patch0002: 0002-docs-bitmaps-use-QMP-lexer-instead-of-json.patch # documentation deps BuildRequires: texinfo @@ -1854,6 +1852,9 @@ getent passwd qemu >/dev/null || \ %changelog +* Wed Jul 17 2019 Cole Robinson - 2:4.1.0-0.1.rc1 +- Update to qemu-4.1.0-rc1 + * Thu Jul 11 2019 Cole Robinson - 2:4.1.0-0.1.rc0 - Update to qemu-4.1.0-rc0 diff --git a/sources b/sources index 84145f7..dc01eb6 100644 --- a/sources +++ b/sources @@ -1 +1 @@ -SHA512 (qemu-4.1.0-rc0.tar.xz) = 12758acc4a9f9875a566c499751dbff356b5e7f39002dfc6d457483ab6a7f360fc8306ace76d501a80eb5ae4bbece9ae6fa2e81a81668bcbcbe8f95cfa90e4a9 +SHA512 (qemu-4.1.0-rc1.tar.xz) = 3857b392a668923820fb192f30ce32385cf8d6081e6d64b5937c6729af45a852b438622a4a83bbd7e270da906726b339bfeaed3074faa5ff14cfa3039750131f