%define githead 25fdf4a

Summary: QEMU is a FAST! processor emulator

Name: qemu

Version: 0.13.0

Release: 0.5.20100809git%{githead}%{?dist}

# Epoch because we pushed a qemu-1.0 package

Epoch: 2

License: GPLv2+ and LGPLv2+ and BSD

Group: Development/Tools

URL: http://www.qemu.org/

# Allow one off builds to be minimalized without foreign

# architecture support (--with x86only):

%define with_x86only  %{?_with_x86only:     1} %{?!_with_x86only:     0}

# OOM killer breaks builds with parallel make on s390(x)

%ifarch s390 s390x

%define _smp_mflags %{nil}

%endif

# Source0: http://downloads.sourceforge.net/sourceforge/kvm/qemu-kvm-%{version}.tar.gz

# The source for this package was pulled from upstream's git.  Use the

# following commands to generate the tarball:

# git archive --format=tar --prefix=qemu-kvm-0.13/ b81fe95 | gzip > qemu-kvm-0.13-b81fe95.tar.gz

Source0: qemu-kvm-%{version}-%{githead}.tar.gz

Source1: qemu.init

# Loads kvm kernel modules at boot

Source2: kvm.modules

# Creates /dev/kvm

Source3: 80-kvm.rules

# KSM control scripts

Source4: ksm.init

Source5: ksm.sysconfig

Source6: ksmtuned.init

Source7: ksmtuned

Source8: ksmtuned.conf

BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)

BuildRequires: SDL-devel zlib-devel which texi2html gnutls-devel cyrus-sasl-devel

BuildRequires: libaio-devel

BuildRequires: rsync

BuildRequires: pciutils-devel

BuildRequires: pulseaudio-libs-devel

BuildRequires: ncurses-devel

BuildRequires: texinfo

%ifarch x86_64

BuildRequires: spice-protocol spice-server-devel

%endif

Requires: %{name}-user = %{epoch}:%{version}-%{release}

Requires: %{name}-system-x86 = %{epoch}:%{version}-%{release}

Requires: %{name}-system-sparc = %{epoch}:%{version}-%{release}

Requires: %{name}-system-arm = %{epoch}:%{version}-%{release}

Requires: %{name}-system-cris = %{epoch}:%{version}-%{release}

Requires: %{name}-system-sh4 = %{epoch}:%{version}-%{release}

Requires: %{name}-system-m68k = %{epoch}:%{version}-%{release}

Requires: %{name}-system-mips = %{epoch}:%{version}-%{release}

Requires: %{name}-system-ppc = %{epoch}:%{version}-%{release}

Requires: %{name}-img = %{epoch}:%{version}-%{release}

%define qemudocdir %{_docdir}/%{name}-%{version}

%description

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation. QEMU has two operating modes:

 * Full system emulation. In this mode, QEMU emulates a full system (for

   example a PC), including a processor and various peripherials. It can be

   used to launch different Operating Systems without rebooting the PC or

   to debug system code.

 * User mode emulation. In this mode, QEMU can launch Linux processes compiled

   for one CPU on another CPU.

As QEMU requires no host kernel patches to run, it is safe and easy to use.

%package kvm

Summary: QEMU metapackage for KVM support

Group: Development/Tools

%ifarch %{ix86} x86_64

Requires: qemu-system-x86 = %{epoch}:%{version}-%{release}

%endif

%ifarch ppc ppc64

Requires: qemu-system-ppc = %{epoch}:%{version}-%{release}

%endif

%description kvm

This is a meta-package that provides a qemu-system-<arch> package for native

architectures where kvm can be enabled. For example, in an x86 system, this

will install qemu-system-x86

%package  img

Summary: QEMU command line tool for manipulating disk images

Group: Development/Tools

%description img

This package provides a command line tool for manipulating disk images

%package  common

Summary: QEMU common files needed by all QEMU targets

Group: Development/Tools

Requires(post): /usr/bin/getent

Requires(post): /usr/sbin/groupadd

Requires(post): /usr/sbin/useradd

Requires(post): /sbin/chkconfig

Requires(preun): /sbin/service /sbin/chkconfig

Requires(postun): /sbin/service

%description common

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the common files needed by all QEMU targets

%package user

Summary: QEMU user mode emulation of qemu targets

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

Requires(post): /sbin/chkconfig

Requires(preun): /sbin/service /sbin/chkconfig

Requires(postun): /sbin/service

%description user

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the user mode emulation of qemu targets

%package system-x86

Summary: QEMU system emulator for x86

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

Provides: kvm = 85

Obsoletes: kvm < 85

Requires: vgabios >= 0.6c-2

Requires: seabios-bin

Requires: /usr/share/gpxe/8086100e.rom

Requires: /usr/share/gpxe/rtl8029.rom

Requires: /usr/share/gpxe/pcnet32.rom

Requires: /usr/share/gpxe/rtl8139.rom

Requires: /usr/share/gpxe/virtio-net.rom

%description system-x86

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the system emulator for x86. When being run in a x86

machine that supports it, this package also provides the KVM virtualization

platform.

%if !%{with_x86only}

%package system-ppc

Summary: QEMU system emulator for ppc

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

Requires: openbios-ppc

%description system-ppc

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the system emulator for ppc

%package system-sparc

Summary: QEMU system emulator for sparc

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

%description system-sparc

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the system emulator for sparc

%package system-arm

Summary: QEMU system emulator for arm

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

%description system-arm

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the system emulator for arm

%package system-mips

Summary: QEMU system emulator for mips

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

%description system-mips

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the system emulator for mips

%package system-cris

Summary: QEMU system emulator for cris

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

%description system-cris

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the system emulator for cris

%package system-m68k

Summary: QEMU system emulator for m68k

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

%description system-m68k

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the system emulator for m68k

%package system-sh4

Summary: QEMU system emulator for sh4

Group: Development/Tools

Requires: %{name}-common = %{epoch}:%{version}-%{release}

%description system-sh4

QEMU is a generic and open source processor emulator which achieves a good

emulation speed by using dynamic translation.

This package provides the system emulator for sh4

%endif

%ifarch %{ix86} x86_64

%package kvm-tools

Summary: KVM debugging and diagnostics tools

Group: Development/Tools

%description kvm-tools

This package contains some diagnostics and debugging tools for KVM,

such as kvm_stat.

%endif

%prep

%setup -q -n qemu-kvm-%{version}

%build

# By default we build everything, but allow x86 to build a minimal version

# with only similar arch target support

%if %{with_x86only}

    buildarch="i386-softmmu x86_64-softmmu i386-linux-user x86_64-linux-user"

%else

    buildarch="i386-softmmu x86_64-softmmu arm-softmmu cris-softmmu m68k-softmmu \

           mips-softmmu mipsel-softmmu mips64-softmmu mips64el-softmmu ppc-softmmu \

           ppcemb-softmmu ppc64-softmmu sh4-softmmu sh4eb-softmmu sparc-softmmu \

           i386-linux-user x86_64-linux-user alpha-linux-user arm-linux-user \

           armeb-linux-user cris-linux-user m68k-linux-user mips-linux-user \

           mipsel-linux-user ppc-linux-user ppc64-linux-user ppc64abi32-linux-user \

           sh4-linux-user sh4eb-linux-user sparc-linux-user sparc64-linux-user \

           sparc32plus-linux-user" \

%endif

# --build-id option is used fedora 8 onwards for giving info to the debug packages.

extraldflags="-Wl,--build-id";

buildldflags="VL_LDFLAGS=-Wl,--build-id"

%ifarch %{ix86} x86_64

# sdl outputs to alsa or pulseaudio depending on system config, but it's broken (#495964)

# alsa works, but causes huge CPU load due to bugs

# oss works, but is very problematic because it grabs exclusive control of the device causing other apps to go haywire

./configure --target-list=x86_64-softmmu \

            --prefix=%{_prefix} \

            --sysconfdir=%{_sysconfdir} \

            --audio-drv-list=pa,sdl,alsa,oss \

            --disable-strip \

            --extra-ldflags=$extraldflags \

            --extra-cflags="$RPM_OPT_FLAGS" \

%ifarch x86_64

            --enable-spice \

%endif

            --disable-xen

echo "config-host.mak contents:"

echo "==="

cat config-host.mak

echo "==="

make V=1 %{?_smp_mflags} $buildldflags

cp -a x86_64-softmmu/qemu-system-x86_64 qemu-kvm

make clean

%endif

./configure \

    --target-list="$buildarch" \

    --prefix=%{_prefix} \

    --sysconfdir=%{_sysconfdir} \

    --interp-prefix=%{_prefix}/qemu-%%M \

    --audio-drv-list=pa,sdl,alsa,oss \

    --disable-kvm \

    --disable-strip \

    --extra-ldflags=$extraldflags \

    --extra-cflags="$RPM_OPT_FLAGS" \

    --disable-xen \

%ifarch x86_64

    --enable-spice \

%endif

    --disable-werror

echo "config-host.mak contents:"

echo "==="

cat config-host.mak

echo "==="

make V=1 %{?_smp_mflags} $buildldflags

%install

rm -rf $RPM_BUILD_ROOT

install -D -p -m 0755 %{SOURCE4} $RPM_BUILD_ROOT%{_initddir}/ksm

install -D -p -m 0644 %{SOURCE5} $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/ksm

install -D -p -m 0755 %{SOURCE6} $RPM_BUILD_ROOT%{_initddir}/ksmtuned

install -D -p -m 0755 %{SOURCE7} $RPM_BUILD_ROOT%{_sbindir}/ksmtuned

install -D -p -m 0644 %{SOURCE8} $RPM_BUILD_ROOT%{_sysconfdir}/ksmtuned.conf

%ifarch %{ix86} x86_64

mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/modules

mkdir -p $RPM_BUILD_ROOT%{_bindir}/

mkdir -p $RPM_BUILD_ROOT%{_datadir}/%{name}

mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/udev/rules.d

install -m 0755 %{SOURCE2} $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/modules/kvm.modules

install -m 0755 kvm/kvm_stat $RPM_BUILD_ROOT%{_bindir}/

install -m 0755 qemu-kvm $RPM_BUILD_ROOT%{_bindir}/

install -m 0644 %{SOURCE3} $RPM_BUILD_ROOT%{_sysconfdir}/udev/rules.d

%endif

make prefix="${RPM_BUILD_ROOT}%{_prefix}" \

     bindir="${RPM_BUILD_ROOT}%{_bindir}" \

     sharedir="${RPM_BUILD_ROOT}%{_datadir}/%{name}" \

     mandir="${RPM_BUILD_ROOT}%{_mandir}" \

     docdir="${RPM_BUILD_ROOT}%{_docdir}/%{name}-%{version}" \

     datadir="${RPM_BUILD_ROOT}%{_datadir}/%{name}" \

     sysconfdir="${RPM_BUILD_ROOT}%{_sysconfdir}" install

chmod -x ${RPM_BUILD_ROOT}%{_mandir}/man1/*

install -D -p -m 0755 %{SOURCE1} $RPM_BUILD_ROOT%{_initddir}/qemu

install -D -p -m 0644 -t ${RPM_BUILD_ROOT}%{qemudocdir} Changelog README TODO COPYING COPYING.LIB LICENSE

install -D -p -m 0644 qemu.sasl $RPM_BUILD_ROOT%{_sysconfdir}/sasl2/qemu.conf

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/pxe*bin

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/gpxe*rom

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/vgabios*bin

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/bios.bin

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/openbios-ppc

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/openbios-sparc32

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/openbios-sparc64

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/petalogix-s3adsp1800.dtb

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/s390-zipl.rom

%if %{with_x86only}

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/bamboo.dtb

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/ppc_rom.bin

rm -rf ${RPM_BUILD_ROOT}%{_datadir}/%{name}/video.x

%endif

# the pxe gpxe images will be symlinks to the images on

# /usr/share/gpxe, as QEMU doesn't know how to look

# for other paths, yet.

pxe_link() {

  ln -s ../gpxe/$2.rom %{buildroot}%{_datadir}/%{name}/pxe-$1.bin

}

pxe_link e1000 8086100e

pxe_link ne2k_pci rtl8029

pxe_link pcnet pcnet32

pxe_link rtl8139 rtl8139

pxe_link virtio virtio-net

ln -s ../vgabios/VGABIOS-lgpl-latest.bin  %{buildroot}/%{_datadir}/%{name}/vgabios.bin

ln -s ../vgabios/VGABIOS-lgpl-latest.cirrus.bin %{buildroot}/%{_datadir}/%{name}/vgabios-cirrus.bin

ln -s ../vgabios/VGABIOS-lgpl-latest.qxl.bin %{buildroot}/%{_datadir}/%{name}/vgabios-qxl.bin

ln -s ../vgabios/VGABIOS-lgpl-latest.stdvga.bin %{buildroot}/%{_datadir}/%{name}/vgabios-stdvga.bin

ln -s ../vgabios/VGABIOS-lgpl-latest.vmware.bin %{buildroot}/%{_datadir}/%{name}/vgabios-vmware.bin

ln -s ../seabios/bios.bin %{buildroot}/%{_datadir}/%{name}/bios.bin

%if !%{with_x86only}

ln -s ../openbios/openbios-ppc %{buildroot}/%{_datadir}/%{name}/openbios-ppc

ln -s ../openbios/openbios-sparc32 %{buildroot}/%{_datadir}/%{name}/openbios-sparc32

ln -s ../openbios/openbios-sparc64 %{buildroot}/%{_datadir}/%{name}/openbios-sparc64

%endif

%clean

rm -rf $RPM_BUILD_ROOT

%post system-x86

%ifarch %{ix86} x86_64

# load kvm modules now, so we can make sure no reboot is needed.

# If there's already a kvm module installed, we don't mess with it

sh %{_sysconfdir}/sysconfig/modules/kvm.modules

%endif

%post common

getent group kvm >/dev/null || groupadd -g 36 -r kvm

getent group qemu >/dev/null || groupadd -g 107 -r qemu

getent passwd qemu >/dev/null || \

  useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \

    -c "qemu user" qemu

/sbin/chkconfig --add ksm

/sbin/chkconfig --add ksmtuned

%preun common

if [ $1 -eq 0 ]; then

    /sbin/service ksmtuned stop &>/dev/null || :

    /sbin/chkconfig --del ksmtuned

    /sbin/service ksm stop &>/dev/null || :

    /sbin/chkconfig --del ksm

fi

%postun common

if [ $1 -ge 1 ]; then

    /sbin/service ksm condrestart &>/dev/null || :

    /sbin/service ksmtuned condrestart &>/dev/null || :

fi

%post user

/sbin/chkconfig --add qemu

%preun user

if [ $1 -eq 0 ]; then

    /sbin/service qemu stop &>/dev/null || :

    /sbin/chkconfig --del qemu

fi

%postun user

if [ $1 -ge 1 ]; then

    /sbin/service qemu condrestart &>/dev/null || :

fi

%files

%defattr(-,root,root)

%files kvm

%defattr(-,root,root)

%files common

%defattr(-,root,root)

%dir %{qemudocdir}

%doc %{qemudocdir}/Changelog

%doc %{qemudocdir}/README

%doc %{qemudocdir}/TODO

%doc %{qemudocdir}/qemu-doc.html

%doc %{qemudocdir}/qemu-tech.html

%doc %{qemudocdir}/COPYING

%doc %{qemudocdir}/COPYING.LIB

%doc %{qemudocdir}/LICENSE

%dir %{_datadir}/%{name}/

%{_datadir}/%{name}/keymaps/

%{_mandir}/man1/qemu.1*

%{_mandir}/man8/qemu-nbd.8*

%{_bindir}/qemu-nbd

%config(noreplace) %{_sysconfdir}/sasl2/qemu.conf

%{_initddir}/ksm

%config(noreplace) %{_sysconfdir}/sysconfig/ksm

%{_initddir}/ksmtuned

%{_sbindir}/ksmtuned

%config(noreplace) %{_sysconfdir}/ksmtuned.conf

%files user

%defattr(-,root,root)

%{_initddir}/qemu

%{_bindir}/qemu-i386

%{_bindir}/qemu-x86_64

%if !%{with_x86only}

%{_bindir}/qemu-alpha

%{_bindir}/qemu-arm

%{_bindir}/qemu-armeb

%{_bindir}/qemu-cris

%{_bindir}/qemu-m68k

%{_bindir}/qemu-mips

%{_bindir}/qemu-mipsel

%{_bindir}/qemu-ppc

%{_bindir}/qemu-ppc64

%{_bindir}/qemu-ppc64abi32

%{_bindir}/qemu-sh4

%{_bindir}/qemu-sh4eb

%{_bindir}/qemu-sparc

%{_bindir}/qemu-sparc64

%{_bindir}/qemu-sparc32plus

%endif

%files system-x86

%defattr(-,root,root)

%{_bindir}/qemu

%{_bindir}/qemu-system-x86_64

%{_datadir}/%{name}/bios.bin

%{_datadir}/%{name}/linuxboot.bin

%{_datadir}/%{name}/multiboot.bin

%{_datadir}/%{name}/vapic.bin

%{_datadir}/%{name}/vgabios.bin

%{_datadir}/%{name}/vgabios-cirrus.bin

%{_datadir}/%{name}/vgabios-qxl.bin

%{_datadir}/%{name}/vgabios-stdvga.bin

%{_datadir}/%{name}/vgabios-vmware.bin

%{_datadir}/%{name}/pxe-e1000.bin

%{_datadir}/%{name}/pxe-virtio.bin

%{_datadir}/%{name}/pxe-pcnet.bin

%{_datadir}/%{name}/pxe-rtl8139.bin

%{_datadir}/%{name}/pxe-ne2k_pci.bin

%ifarch %{ix86} x86_64

%{_datadir}/%{name}/extboot.bin

%{_bindir}/qemu-kvm

%{_sysconfdir}/sysconfig/modules/kvm.modules

%{_sysconfdir}/udev/rules.d/80-kvm.rules

%{_sysconfdir}/qemu/target-*

%files kvm-tools

%defattr(-,root,root,-)

%{_bindir}/kvm_stat

%endif

%if !%{with_x86only}

%files system-sparc

%defattr(-,root,root)

%{_bindir}/qemu-system-sparc

%{_datadir}/%{name}/openbios-sparc32

%{_datadir}/%{name}/openbios-sparc64

%files system-arm

%defattr(-,root,root)

%{_bindir}/qemu-system-arm

%files system-mips

%defattr(-,root,root)

%{_bindir}/qemu-system-mips

%{_bindir}/qemu-system-mipsel

%{_bindir}/qemu-system-mips64

%{_bindir}/qemu-system-mips64el

%files system-ppc

%defattr(-,root,root)

%{_bindir}/qemu-system-ppc

%{_bindir}/qemu-system-ppc64

%{_bindir}/qemu-system-ppcemb

%{_datadir}/%{name}/openbios-ppc

%{_datadir}/%{name}/video.x

%{_datadir}/%{name}/bamboo.dtb

%{_datadir}/%{name}/ppc_rom.bin

%files system-cris

%defattr(-,root,root)

%{_bindir}/qemu-system-cris

%files system-m68k

%defattr(-,root,root)

%{_bindir}/qemu-system-m68k

%files system-sh4

%defattr(-,root,root)

%{_bindir}/qemu-system-sh4

%{_bindir}/qemu-system-sh4eb

%endif

%files img

%defattr(-,root,root)

%{_bindir}/qemu-img

%{_bindir}/qemu-io

%{_mandir}/man1/qemu-img.1*

%changelog

* Tue Aug 10 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.13.0-0.5.20100809git25fdf4a

- Fix typo in e1000 gpxe rom requires.

- Add links to newer vgabios

* Tue Aug 10 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.13.0-0.4.20100809git25fdf4a

- Disable spice on 32bit, it is not supported and buildreqs don't exist.

* Mon Aug 9 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.13.0-0.3.20100809git25fdf4a

- Updates from upstream towards 0.13 stable

- Fix requires on gpxe

- enable spice now that buildreqs are in the repository.

- ksmtrace has moved to a separate upstream package

* Tue Jul 27 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.13.0-0.2.20100727gitb81fe95

- add texinfo buildreq for manpages.

* Tue Jul 27 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.13.0-0.1.20100727gitb81fe95

- Update to 0.13.0 upstream snapshot

- ksm init fixes from upstream

* Tue Jul 20 2010 Dan Horák <dan[at]danny.cz> - 2:0.12.3-8

- Add avoid-llseek patch from upstream needed for building on s390(x)

- Don't use parallel make on s390(x)

* Tue Jun 22 2010 Amit Shah <amit.shah@redhat.com> - 2:0.12.3-7

- Add vvfat hardening patch from upstream (#605202)

* Fri Apr 23 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.12.3-6

- Change requires to the noarch seabios-bin

- Add ownership of docdir to qemu-common (#572110)

- Fix "Cannot boot from non-existent NIC" error when using virt-install (#577851)

* Thu Apr 15 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.12.3-5

- Update virtio console patches from upstream

* Mon Mar 11 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.12.3-4

- Detect cdrom via ioctl (#473154)

- re add increased buffer for USB control requests (#546483)

* Wed Mar 10 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.12.3-3

- Migration clear the fd in error cases (#518032)

* Tue Mar 09 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.12.3-2

- Allow builds --with x86only

- Add libaio-devel buildreq for aio support

* Fri Feb 26 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.12.3-1

- Update to 0.12.3 upstream

- vhost-net migration/restart fixes

- Add F-13 machine type

- virtio-serial fixes

* Tue Feb 09 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.12.2-6

- Add vhost net support.

* Thu Feb 04 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.12.2-5

- Avoid creating too large iovecs in multiwrite merge (#559717)

- Don't try to set max_kernel_pages during ksm init on newer kernels (#558281)

- Add logfile options for ksmtuned debug.

* Wed Jan 27 2010 Amit Shah <amit.shah@redhat.com> - 2:0.12.2-4

- Remove build dependency on iasl now that we have seabios

* Wed Jan 27 2010 Amit Shah <amit.shah@redhat.com> - 2:0.12.2-3

- Remove source target for 0.12.1.2

* Wed Jan 27 2010 Amit Shah <amit.shah@redhat.com> - 2:0.12.2-2

- Add virtio-console patches from upstream for the F13 VirtioSerial feature

* Mon Jan 25 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.12.2-1

- Update to 0.12.2 upstream

* Fri Jan 10 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.12.1.2-3

- Point to seabios instead of bochs, and add a requires for seabios

* Mon Jan  4 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.12.1.2-2

- Remove qcow2 virtio backing file patch

* Mon Jan  4 2010 Justin M. Forbes <jforbes@redhat.com> - 2:0.12.1.2-1

- Update to 0.12.1.2 upstream

- Remove patches included in upstream

* Fri Nov 20 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.11.0-12

- Fix a use-after-free crasher in the slirp code (#539583)

- Fix overflow in the parallels image format support (#533573)

* Wed Nov  4 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.11.0-11

- Temporarily disable preadv/pwritev support to fix data corruption (#526549)

* Tue Nov  3 2009 Justin M. Forbes <jforbes@redhat.com> - 2:0.11.0-10

- Default ksm and ksmtuned services on.

* Thu Oct 29 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.11.0-9

- Fix dropped packets with non-virtio NICs (#531419)

* Wed Oct 21 2009 Glauber Costa <gcosta@redhat.com> - 2:0.11.0-8

- Properly save kvm time registers (#524229)

* Mon Oct 19 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.11.0-7

- Fix potential segfault from too small MSR_COUNT (#528901)

* Fri Oct  9 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.11.0-6

- Fix fs errors with virtio and qcow2 backing file (#524734)

- Fix ksm initscript errors on kernel missing ksm (#527653)

- Add missing Requires(post): getent, useradd, groupadd (#527087)

* Tue Oct  6 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.11.0-5

- Add 'retune' verb to ksmtuned init script

* Mon Oct  5 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.11.0-4

- Use rtl8029 PXE rom for ne2k_pci, not ne (#526777)

- Also, replace the gpxe-roms-qemu pkg requires with file-based requires

* Thu Oct  1 2009 Justin M. Forbes <jmforbes@redhat.com> - 2:0.11.0-3

- Improve error reporting on file access (#524695)

* Mon Sep 28 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.11.0-2

- Fix pci hotplug to not exit if supplied an invalid NIC model (#524022)

* Mon Sep 28 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.11.0-1

- Update to 0.11.0 release

- Drop a couple of upstreamed patches

* Wed Sep 23 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.92-5

- Fix issue causing NIC hotplug confusion when no model is specified (#524022)

* Wed Sep 16 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.92-4

- Fix for KSM patch from Justin Forbes

* Wed Sep 16 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.92-3

- Add ksmtuned, also from Dan Kenigsberg

- Use %_initddir macro

* Wed Sep 16 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.92-2

- Add ksm control script from Dan Kenigsberg

* Mon Sep  7 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.92-1

- Update to qemu-kvm-0.11.0-rc2

- Drop upstreamed patches

- extboot install now fixed upstream

- Re-place TCG init fix (#516543) with the one gone upstream

* Mon Sep  7 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.91-0.10.rc1

- Fix MSI-X error handling on older kernels (#519787)

* Fri Sep  4 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.91-0.9.rc1

- Make pulseaudio the default audio backend (#519540, #495964, #496627)

* Thu Aug 20 2009 Richard W.M. Jones <rjones@redhat.com> - 2:0.10.91-0.8.rc1

- Fix segfault when qemu-kvm is invoked inside a VM (#516543)

* Tue Aug 18 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.91-0.7.rc1

- Fix permissions on udev rules (#517571)

* Mon Aug 17 2009 Lubomir Rintel <lkundrak@v3.sk> - 2:0.10.91-0.6.rc1

- Allow blacklisting of kvm modules (#517866)

* Fri Aug  7 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.91-0.5.rc1

- Fix virtio_net with -net user (#516022)

* Tue Aug  4 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.91-0.4.rc1

- Update to qemu-kvm-0.11-rc1; no changes from rc1-rc0

* Tue Aug  4 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.91-0.3.rc1.rc0

- Fix extboot checksum (bug #514899)

* Fri Jul 31 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.91-0.2.rc1.rc0

- Add KSM support

- Require bochs-bios >= 2.3.8-0.8 for latest kvm bios updates

* Thu Jul 30 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.91-0.1.rc1.rc0

- Update to qemu-kvm-0.11.0-rc1-rc0

- This is a pre-release of the official -rc1

- A vista installer regression is blocking the official -rc1 release

- Drop qemu-prefer-sysfs-for-usb-host-devices.patch

- Drop qemu-fix-build-for-esd-audio.patch

- Drop qemu-slirp-Fix-guestfwd-for-incoming-data.patch

- Add patch to ensure extboot.bin is installed

* Sun Jul 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2:0.10.50-14.kvm88

- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild

* Thu Jul 23 2009 Glauber Costa <glommer@redhat.com> - 2:0.10.50-13.kvm88

- Fix bug 513249, -net channel option is broken

* Thu Jul 16 2009 Daniel P. Berrange <berrange@redhat.com> - 2:0.10.50-12.kvm88

- Add 'qemu' user and group accounts

- Force disable xen until it can be made to build

* Thu Jul 16 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-11.kvm88

- Update to kvm-88, see http://www.linux-kvm.org/page/ChangeLog

- Package mutiboot.bin

- Update for how extboot is built

- Fix sf.net source URL

- Drop qemu-fix-ppc-softmmu-kvm-disabled-build.patch

- Drop qemu-fix-pcspk-build-with-kvm-disabled.patch

- Cherry-pick fix for esound support build failure

* Wed Jul 15 2009 Daniel Berrange <berrange@lettuce.camlab.fab.redhat.com> - 2:0.10.50-10.kvm87

- Add udev rules to make /dev/kvm world accessible & group=kvm (rhbz #497341)

- Create a kvm group if it doesn't exist (rhbz #346151)

* Tue Jul 07 2009 Glauber Costa <glommer@redhat.com> - 2:0.10.50-9.kvm87

- use pxe roms from gpxe, instead of etherboot package.

* Fri Jul  3 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-8.kvm87

- Prefer sysfs over usbfs for usb passthrough (#508326)

* Sat Jun 27 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-7.kvm87

- Update to kvm-87

- Drop upstreamed patches

- Cherry-pick new ppc build fix from upstream

- Work around broken linux-user build on ppc

- Fix hw/pcspk.c build with --disable-kvm

- Re-enable preadv()/pwritev() since #497429 is long since fixed

- Kill petalogix-s3adsp1800.dtb, since we don't ship the microblaze target

* Fri Jun  5 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-6.kvm86

- Fix 'kernel requires an x86-64 CPU' error

- BuildRequires ncurses-devel to enable '-curses' option (#504226)

* Wed Jun  3 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-5.kvm86

- Prevent locked cdrom eject - fixes hang at end of anaconda installs (#501412)

- Avoid harmless 'unhandled wrmsr' warnings (#499712)

* Thu May 21 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-4.kvm86

- Update to kvm-86 release

- ChangeLog here: http://marc.info/?l=kvm&m=124282885729710

* Fri May  1 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-3.kvm85

- Really provide qemu-kvm as a metapackage for comps

* Tue Apr 28 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-2.kvm85

- Provide qemu-kvm as a metapackage for comps

* Mon Apr 27 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-1.kvm85

- Update to qemu-kvm-devel-85

- kvm-85 is based on qemu development branch, currently version 0.10.50

- Include new qemu-io utility in qemu-img package

- Re-instate -help string for boot=on to fix virtio booting with libvirt

- Drop upstreamed patches

- Fix missing kernel/include/asm symlink in upstream tarball

- Fix target-arm build

- Fix build on ppc

- Disable preadv()/pwritev() until bug #497429 is fixed

- Kill more .kernelrelease uselessness

- Make non-kvm qemu build verbose

* Fri Apr 24 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10-15

- Fix source numbering typos caused by make-release addition

* Thu Apr 23 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10-14

- Improve instructions for generating the tarball

* Tue Apr 21 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10-13

- Enable pulseaudio driver to fix qemu lockup at shutdown (#495964)

* Tue Apr 21 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10-12

- Another qcow2 image corruption fix (#496642)

* Mon Apr 20 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10-11

- Fix qcow2 image corruption (#496642)

* Sun Apr 19 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10-10

- Run sysconfig.modules from %post on x86_64 too (#494739)

* Sun Apr 19 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10-9

- Align VGA ROM to 4k boundary - fixes 'qemu-kvm -std vga' (#494376)

* Tue Apr  14 2009 Glauber Costa <glommer@redhat.com> - 2:0.10-8

- Provide qemu-kvm conditional on the architecture.

* Thu Apr  9 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10-7

- Add a much cleaner fix for vga segfault (#494002)

* Sun Apr  5 2009 Glauber Costa <glommer@redhat.com> - 2:0.10-6

- Fixed qcow2 segfault creating disks over 2TB. #491943

* Fri Apr  3 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10-5

- Fix vga segfault under kvm-autotest (#494002)

- Kill kernelrelease hack; it's not needed

- Build with "make V=1" for more verbose logs

* Thu Apr 02 2009 Glauber Costa <glommer@redhat.com> - 2:0.10-4

- Support botting gpxe roms.

* Wed Apr 01 2009 Glauber Costa <glommer@redhat.com> - 2:0.10-2

- added missing patch. love for CVS.

* Wed Apr 01 2009 Glauber Costa <glommer@redhat.com> - 2:0.10-1

- Include debuginfo for qemu-img

- Do not require qemu-common for qemu-img

- Explicitly own each of the firmware files

- remove firmwares for ppc and sparc. They should be provided by an external package.

  Not that the packages exists for sparc in the secondary arch repo as noarch, but they

  don't automatically get into main repos. Unfortunately it's the best we can do right

  now.

- rollback a bit in time. Snapshot from avi's maint/2.6.30

  - this requires the sasl patches to come back.

  - with-patched-kernel comes back.

* Wed Mar 25 2009 Mark McLoughlin <markmc@redhat.com> - 2:0.10-0.12.kvm20090323git

- BuildRequires pciutils-devel for device assignment (#492076)

* Mon Mar 23 2009 Glauber Costa <glommer@redhat.com> - 2:0.10-0.11.kvm20090323git

- Update to snapshot kvm20090323.

- Removed patch2 (upstream).

- use upstream's new split package.

- --with-patched-kernel flag not needed anymore

- Tell how to get the sources.

* Wed Mar 18 2009 Glauber Costa <glommer@redhat.com> - 2:0.10-0.10.kvm20090310git

- Added extboot to files list.

* Wed Mar 11 2009 Glauber Costa <glommer@redhat.com> - 2:0.10-0.9.kvm20090310git

- Fix wrong reference to bochs bios.

* Wed Mar 11 2009 Glauber Costa <glommer@redhat.com> - 2:0.10-0.8.kvm20090310git

- fix Obsolete/Provides pair

- Use kvm bios from bochs-bios package.

- Using RPM_OPT_FLAGS in configure

- Picked back audio-drv-list from kvm package

* Tue Mar 10 2009 Glauber Costa <glommer@redhat.com> - 2:0.10-0.7.kvm20090310git

- modify ppc patch

* Tue Mar 10 2009 Glauber Costa <glommer@redhat.com> - 2:0.10-0.6.kvm20090310git

- updated to kvm20090310git

- removed sasl patches (already in this release)

* Tue Mar 10 2009 Glauber Costa <glommer@redhat.com> - 2:0.10-0.5.kvm20090303git

- kvm.modules were being wrongly mentioned at %%install.