From b10d4b798bf274abe9cf51b1fe4b8105e9abab7b Mon Sep 17 00:00:00 2001 Message-Id: From: Laine Stump Date: Tue, 6 Aug 2013 13:23:24 -0600 Subject: [PATCH] qemu: fix handling of default/implicit devices for q35 This patch is part of the resolution to: https://bugzilla.redhat.com/show_bug.cgi?id=819968 This patch adds in special handling for a few devices that need to be treated differently for q35 domains: usb - there is no implicit/default usb controller for the q35 machinetype. This is done because normally the default usb controller is added to a domain by just adding "-usb" to the qemu commandline, and it's assumed that this will add a single piix3 usb1 controller at slot 1 function 2. That's not what happens when the machinetype is q35, though. Instead, adding -usb to the commandline adds 3 usb (version 2) controllers to the domain at slot 0x1D.{1,2,7}. Rather than having translate into 3 separate devices on the PCI bus, it's cleaner to not automatically add a default usb device; one can always be added explicitly if desired. Or we may decide that on q35 machines, 3 usb controllers will be automatically added when none is given. But for this initial commit, at least we aren't locking ourselves into something we later won't want. video - qemu always initializes the primary video device immediately after any integrated devices for the machinetype. Unless instructed otherwise (by using "-device vga..." instead of "-vga" which libvirt uses in many cases to work around deficiencies and bugs in various qemu versions) qemu will always pick the first unused slot. In the case of the "pc" machinetype and its derivatives, this is always slot 2, but on q35 machinetypes, the first free slot is slot 1 (since the q35's integrated peripheral devices are placed in other slots, e.g. slot 0x1f). In order to make the PCI address of the video device predictable, that slot (1 or 2, depending on machinetype) is reserved even when no video device has been specified. sata - a q35 machine always has a sata controller implicitly added at slot 0x1F, function 2. There is no way to avoid this controller, so we always add it. Note that the xml2xml tests for the pcie-root and q35 cases were changed to use DO_TEST_DIFFERENT() so that we can check for the sata controller being automatically added. This is especially important because we can't check for it in the xml2argv output (it has no effect on that output since it's an implicit device). ide - q35 has no ide controllers. isa and smbus controllers - these two are always present in a q35 (at slot 0x1F functions 0 and 3) but we have no way of modelling them in our config. We do need to reserve those functions so that the user doesn't attempt to put anything else there though. (note that the "pc" machine type also has an ISA controller, which we also ignore). (cherry picked from commit c27b0bb171d9bdac10a93492a2a99eaa22746694) --- src/qemu/qemu_command.c | 159 ++++++++++++++++++++- src/qemu/qemu_domain.c | 7 + tests/qemuxml2argvdata/qemuxml2argv-pcie-root.args | 4 +- tests/qemuxml2argvdata/qemuxml2argv-pcie-root.xml | 1 - tests/qemuxml2argvdata/qemuxml2argv-q35.args | 3 +- tests/qemuxml2argvtest.c | 2 + .../qemuxml2xmlout-pcie-root.xml | 2 +- tests/qemuxml2xmloutdata/qemuxml2xmlout-q35.xml | 26 ++++ tests/qemuxml2xmltest.c | 2 +- 9 files changed, 198 insertions(+), 8 deletions(-) create mode 100644 tests/qemuxml2xmloutdata/qemuxml2xmlout-q35.xml diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 50f37ae..3e07360 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -1686,6 +1686,18 @@ qemuCollectPCIAddress(virDomainDefPtr def ATTRIBUTE_UNUSED, break; } } + /* SATA controllers aren't hot-plugged, and can be put in either a + * PCI or PCIe slot + */ + if (device->type == VIR_DOMAIN_DEVICE_CONTROLLER && + device->data.controller->type == VIR_DOMAIN_CONTROLLER_TYPE_SATA) + flags = QEMU_PCI_CONNECT_TYPE_PCI | QEMU_PCI_CONNECT_TYPE_PCIE; + + /* video cards aren't hot-plugged, and can be put in either a PCI + * or PCIe slot + */ + if (device->type == VIR_DOMAIN_DEVICE_VIDEO) + flags = QEMU_PCI_CONNECT_TYPE_PCI | QEMU_PCI_CONNECT_TYPE_PCIE; /* Ignore implicit controllers on slot 0:0:1.0: * implicit IDE controller on 0:0:1.1 (no qemu command line) @@ -2258,6 +2270,12 @@ qemuValidateDevicePCISlotsPIIX3(virDomainDefPtr def, } if (def->nvideos > 0) { + /* Because the PIIX3 integrated IDE/USB controllers are + * already at slot 1, when qemu looks for the first free slot + * to place the VGA controller (which is always the first + * device added after integrated devices), it *always* ends up + * at slot 2. + */ virDomainVideoDefPtr primaryVideo = def->videos[0]; if (primaryVideo->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) { primaryVideo->info.type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI; @@ -2318,6 +2336,136 @@ error: } +static bool +qemuDomainMachineIsQ35(virDomainDefPtr def) +{ + return (STRPREFIX(def->os.machine, "pc-q35") || + STREQ(def->os.machine, "q35")); +} + + +static int +qemuDomainValidateDevicePCISlotsQ35(virDomainDefPtr def, + virQEMUCapsPtr qemuCaps, + qemuDomainPCIAddressSetPtr addrs) +{ + size_t i; + virDevicePCIAddress tmp_addr; + bool qemuDeviceVideoUsable = virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_VIDEO_PRIMARY); + virDevicePCIAddressPtr addrptr; + qemuDomainPCIConnectFlags flags = QEMU_PCI_CONNECT_TYPE_PCIE; + + /* Verify that the first SATA controller is at 00:1F.2 */ + /* the q35 machine type *always* has a SATA controller at this address */ + for (i = 0; i < def->ncontrollers; i++) { + if (def->controllers[i]->type == VIR_DOMAIN_CONTROLLER_TYPE_SATA && + def->controllers[i]->idx == 0) { + if (def->controllers[i]->info.type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) { + if (def->controllers[i]->info.addr.pci.domain != 0 || + def->controllers[i]->info.addr.pci.bus != 0 || + def->controllers[i]->info.addr.pci.slot != 0x1F || + def->controllers[i]->info.addr.pci.function != 2) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("Primary SATA controller must have PCI address 0:0:1f.2")); + goto error; + } + } else { + def->controllers[i]->info.type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI; + def->controllers[i]->info.addr.pci.domain = 0; + def->controllers[i]->info.addr.pci.bus = 0; + def->controllers[i]->info.addr.pci.slot = 0x1F; + def->controllers[i]->info.addr.pci.function = 2; + } + } + } + + /* Reserve slot 0x1F function 0 (ISA bridge, not in config model) + * and function 3 (SMBus, also not (yet) in config model). As with + * the SATA controller, these devices are always present in a q35 + * machine; there is no way to not have them. + */ + if (addrs->nbuses) { + memset(&tmp_addr, 0, sizeof(tmp_addr)); + tmp_addr.slot = 0x1F; + tmp_addr.function = 0; + tmp_addr.multi = 1; + if (qemuDomainPCIAddressReserveAddr(addrs, &tmp_addr, flags, + false, false) < 0) + goto error; + tmp_addr.function = 3; + tmp_addr.multi = 0; + if (qemuDomainPCIAddressReserveAddr(addrs, &tmp_addr, flags, + false, false) < 0) + goto error; + } + + if (def->nvideos > 0) { + /* NB: unlike the pc machinetypes, on q35 machinetypes the + * integrated devices are at slot 0x1f, so when qemu looks for + * the first free lot for the first VGA, it will always be at + * slot 1 (which was used up by the integrated PIIX3 devices + * on pc machinetypes). + */ + virDomainVideoDefPtr primaryVideo = def->videos[0]; + if (primaryVideo->info.type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) { + primaryVideo->info.type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI; + primaryVideo->info.addr.pci.domain = 0; + primaryVideo->info.addr.pci.bus = 0; + primaryVideo->info.addr.pci.slot = 1; + primaryVideo->info.addr.pci.function = 0; + addrptr = &primaryVideo->info.addr.pci; + + if (!qemuDomainPCIAddressValidate(addrs, addrptr, flags)) + goto error; + + if (qemuDomainPCIAddressSlotInUse(addrs, addrptr)) { + if (qemuDeviceVideoUsable) { + virResetLastError(); + if (qemuDomainPCIAddressReserveNextSlot(addrs, + &primaryVideo->info, + flags) < 0) + goto error; + } else { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("PCI address 0:0:1.0 is in use, " + "QEMU needs it for primary video")); + goto error; + } + } else if (qemuDomainPCIAddressReserveSlot(addrs, addrptr, flags) < 0) { + goto error; + } + } else if (!qemuDeviceVideoUsable) { + if (primaryVideo->info.addr.pci.domain != 0 || + primaryVideo->info.addr.pci.bus != 0 || + primaryVideo->info.addr.pci.slot != 1 || + primaryVideo->info.addr.pci.function != 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("Primary video card must have PCI address 0:0:1.0")); + goto error; + } + /* If TYPE==PCI, then qemuCollectPCIAddress() function + * has already reserved the address, so we must skip */ + } + } else if (addrs->nbuses && !qemuDeviceVideoUsable) { + memset(&tmp_addr, 0, sizeof(tmp_addr)); + tmp_addr.slot = 1; + + if (qemuDomainPCIAddressSlotInUse(addrs, &tmp_addr)) { + VIR_DEBUG("PCI address 0:0:1.0 in use, future addition of a video" + " device will not be possible without manual" + " intervention"); + virResetLastError(); + } else if (qemuDomainPCIAddressReserveSlot(addrs, &tmp_addr, flags) < 0) { + goto error; + } + } + return 0; + +error: + return -1; +} + + /* * This assigns static PCI slots to all configured devices. * The ordering here is chosen to match the ordering used @@ -2368,6 +2516,11 @@ qemuAssignDevicePCISlots(virDomainDefPtr def, goto error; } + if (qemuDomainMachineIsQ35(def) && + qemuDomainValidateDevicePCISlotsQ35(def, qemuCaps, addrs) < 0) { + goto error; + } + /* PCI controllers */ for (i = 0; i < def->ncontrollers; i++) { if (def->controllers[i]->type == VIR_DOMAIN_CONTROLLER_TYPE_PCI) { @@ -7679,6 +7832,9 @@ qemuBuildCommandLine(virConnectPtr conn, _("SATA is not supported with this " "QEMU binary")); goto error; + } else if (cont->idx == 0 && qemuDomainMachineIsQ35(def)) { + /* first SATA controller on Q35 machines is implicit */ + continue; } else { char *devstr; @@ -7692,6 +7848,7 @@ qemuBuildCommandLine(virConnectPtr conn, } } else if (cont->type == VIR_DOMAIN_CONTROLLER_TYPE_USB && cont->model == -1 && + !qemuDomainMachineIsQ35(def) && (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_PIIX3_USB_UHCI) || def->os.arch == VIR_ARCH_PPC64)) { if (usblegacy) { @@ -7716,7 +7873,7 @@ qemuBuildCommandLine(virConnectPtr conn, } } - if (usbcontroller == 0) + if (usbcontroller == 0 && !qemuDomainMachineIsQ35(def)) virCommandAddArg(cmd, "-usb"); for (i = 0; i < def->nhubs; i++) { diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index bdbe5a9..dc72722 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -700,6 +700,7 @@ qemuDomainDefPostParse(virDomainDefPtr def, void *opaque ATTRIBUTE_UNUSED) { bool addDefaultUSB = true; + bool addImplicitSATA = false; bool addPCIRoot = false; bool addPCIeRoot = false; @@ -722,6 +723,7 @@ qemuDomainDefPostParse(virDomainDefPtr def, STREQ(def->os.machine, "q35")) { addPCIeRoot = true; addDefaultUSB = false; + addImplicitSATA = true; break; } if (!STRPREFIX(def->os.machine, "pc-0.") && @@ -754,6 +756,11 @@ qemuDomainDefPostParse(virDomainDefPtr def, def, VIR_DOMAIN_CONTROLLER_TYPE_USB, 0, -1) < 0) return -1; + if (addImplicitSATA && + virDomainDefMaybeAddController( + def, VIR_DOMAIN_CONTROLLER_TYPE_SATA, 0, -1) < 0) + return -1; + if (addPCIRoot && virDomainDefMaybeAddController( def, VIR_DOMAIN_CONTROLLER_TYPE_PCI, 0, diff --git a/tests/qemuxml2argvdata/qemuxml2argv-pcie-root.args b/tests/qemuxml2argvdata/qemuxml2argv-pcie-root.args index 23db85c..cecef7b 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-pcie-root.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-pcie-root.args @@ -1,5 +1,5 @@ LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test /usr/libexec/qemu-kvm \ -S -M q35 -m 2048 -smp 2 -nographic -nodefaults \ -monitor unix:/tmp/test-monitor,server,nowait -no-acpi -boot c \ --device i82801b11-bridge,id=pci.1,bus=pci.0,addr=0x1 \ --device pci-bridge,chassis_nr=2,id=pci.2,bus=pci.1,addr=0x1 -usb +-device i82801b11-bridge,id=pci.1,bus=pci.0,addr=0x2 \ +-device pci-bridge,chassis_nr=2,id=pci.2,bus=pci.1,addr=0x1 diff --git a/tests/qemuxml2argvdata/qemuxml2argv-pcie-root.xml b/tests/qemuxml2argvdata/qemuxml2argv-pcie-root.xml index 1aa5455..d7fb90c 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-pcie-root.xml +++ b/tests/qemuxml2argvdata/qemuxml2argv-pcie-root.xml @@ -15,7 +15,6 @@ /usr/libexec/qemu-kvm - diff --git a/tests/qemuxml2argvdata/qemuxml2argv-q35.args b/tests/qemuxml2argvdata/qemuxml2argv-q35.args index ddff6f0..6c24407 100644 --- a/tests/qemuxml2argvdata/qemuxml2argv-q35.args +++ b/tests/qemuxml2argvdata/qemuxml2argv-q35.args @@ -1,7 +1,6 @@ LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test \ /usr/libexec/qemu-kvm -S -M q35 -m 2048 -smp 2 -nographic -nodefaults \ -monitor unix:/tmp/test-monitor,server,nowait -no-acpi -boot c \ --device i82801b11-bridge,id=pci.1,bus=pci.0,addr=0x1 \ +-device i82801b11-bridge,id=pci.1,bus=pci.0,addr=0x2 \ -device pci-bridge,chassis_nr=2,id=pci.2,bus=pci.1,addr=0x1 \ --usb \ -vga qxl -global qxl.ram_size=67108864 -global qxl.vram_size=18874368 diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c index aba0f88..0068d27 100644 --- a/tests/qemuxml2argvtest.c +++ b/tests/qemuxml2argvtest.c @@ -995,11 +995,13 @@ mymain(void) DO_TEST("pci-bridge-many-disks", QEMU_CAPS_DEVICE, QEMU_CAPS_DRIVE, QEMU_CAPS_DEVICE_PCI_BRIDGE); DO_TEST("pcie-root", + QEMU_CAPS_ICH9_AHCI, QEMU_CAPS_DEVICE, QEMU_CAPS_DEVICE_PCI_BRIDGE, QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE); DO_TEST("q35", QEMU_CAPS_DEVICE, QEMU_CAPS_DEVICE_PCI_BRIDGE, QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE, + QEMU_CAPS_ICH9_AHCI, QEMU_CAPS_VGA, QEMU_CAPS_DEVICE_VIDEO_PRIMARY, QEMU_CAPS_VGA, QEMU_CAPS_VGA_QXL, QEMU_CAPS_DEVICE_QXL); diff --git a/tests/qemuxml2xmloutdata/qemuxml2xmlout-pcie-root.xml b/tests/qemuxml2xmloutdata/qemuxml2xmlout-pcie-root.xml index 25c77f1..f10e85b 100644 --- a/tests/qemuxml2xmloutdata/qemuxml2xmlout-pcie-root.xml +++ b/tests/qemuxml2xmloutdata/qemuxml2xmlout-pcie-root.xml @@ -15,7 +15,7 @@ /usr/libexec/qemu-kvm - + diff --git a/tests/qemuxml2xmloutdata/qemuxml2xmlout-q35.xml b/tests/qemuxml2xmloutdata/qemuxml2xmlout-q35.xml new file mode 100644 index 0000000..2a86e61 --- /dev/null +++ b/tests/qemuxml2xmloutdata/qemuxml2xmlout-q35.xml @@ -0,0 +1,26 @@ + + q35-test + 11dbdcdd-4c3b-482b-8903-9bdb8c0a2774 + 2097152 + 2097152 + 2 + + hvm + + + + destroy + restart + destroy + + /usr/libexec/qemu-kvm + + + + + + + + diff --git a/tests/qemuxml2xmltest.c b/tests/qemuxml2xmltest.c index 8b4590a..5c6730d 100644 --- a/tests/qemuxml2xmltest.c +++ b/tests/qemuxml2xmltest.c @@ -295,7 +295,7 @@ mymain(void) DO_TEST_DIFFERENT("pci-autoadd-addr"); DO_TEST_DIFFERENT("pci-autoadd-idx"); DO_TEST_DIFFERENT("pcie-root"); - DO_TEST("q35"); + DO_TEST_DIFFERENT("q35"); DO_TEST("hostdev-scsi-lsi"); DO_TEST("hostdev-scsi-virtio-scsi"); -- 1.8.3.2