diff --git a/.ceph.metadata b/.ceph.metadata
new file mode 100644
index 0000000..a885587
--- /dev/null
+++ b/.ceph.metadata
@@ -0,0 +1 @@
+b6c7dec0c286679225133c4d71d00c2ae9ccb846 SOURCES/ceph-12.2.7.tar.gz
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..0670fa8
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1 @@
+SOURCES/ceph-12.2.7.tar.gz
diff --git a/SOURCES/0001-src-rocksdb-util-murmurhash.patch b/SOURCES/0001-src-rocksdb-util-murmurhash.patch
new file mode 100644
index 0000000..f67a0ff
--- /dev/null
+++ b/SOURCES/0001-src-rocksdb-util-murmurhash.patch
@@ -0,0 +1,13 @@
+--- ceph-12.1.1.orig/src/rocksdb/util/murmurhash.cc 2017-04-27 01:13:46.000000000 +0100
++++ ceph-12.1.1.orig/src/rocksdb/util/murmurhash.cc 2017-07-25 11:37:28.910266684 +0100
+@@ -113,8 +113,8 @@ unsigned int MurmurHash2 ( const void *
+
+ switch(len)
+ {
+- case 3: h ^= data[2] << 16;
+- case 2: h ^= data[1] << 8;
++ case 3: h ^= data[2] << 16; // fallthrough
++ case 2: h ^= data[1] << 8; // fallthrough
+ case 1: h ^= data[0];
+ h *= m;
+ };
diff --git a/SOURCES/0002-cmake-Support-ppc64.patch b/SOURCES/0002-cmake-Support-ppc64.patch
new file mode 100644
index 0000000..6b09549
--- /dev/null
+++ b/SOURCES/0002-cmake-Support-ppc64.patch
@@ -0,0 +1,127 @@
+From 2f0a7153460acc3f21462236f470ec3471fa2ee1 Mon Sep 17 00:00:00 2001
+From: Boris Ranto <branto@redhat.com>
+Date: Mon, 31 Jul 2017 19:50:23 +0200
+Subject: [PATCH] cmake: Support ppc64
+
+The ppc64 support requires a couple of changes:
+- adding the ppc64 support to cmake
+- changing optimized crc32 code to compile on ppc64le only
+- moving ifdef condition before crc32_align to avoid defined but not
+used warning
+
+Signed-off-by: Boris Ranto <branto@redhat.com>
+---
+ cmake/modules/SIMDExt.cmake | 15 ++++++++++++++-
+ src/CMakeLists.txt | 4 +++-
+ src/arch/ppc.c | 8 ++++----
+ src/common/crc32c_ppc.c | 6 +++---
+ 4 files changed, 24 insertions(+), 9 deletions(-)
+
+diff --git a/cmake/modules/SIMDExt.cmake b/cmake/modules/SIMDExt.cmake
+index 5330835..c47667d 100644
+--- a/cmake/modules/SIMDExt.cmake
++++ b/cmake/modules/SIMDExt.cmake
+@@ -109,7 +109,20 @@ elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "i386|i686|amd64|x86_64|AMD64")
+ endif(CMAKE_SYSTEM_PROCESSOR MATCHES "i686|amd64|x86_64|AMD64")
+ elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "(powerpc|ppc)64le")
+ set(HAVE_PPC64LE 1)
+- message(STATUS " we are ppc64le")
++ message(STATUS " we are ppc64")
++ CHECK_C_COMPILER_FLAG("-maltivec" HAS_ALTIVEC)
++ if(HAS_ALTIVEC)
++ message(STATUS " HAS_ALTIVEC yes")
++ set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -maltivec")
++ set(CMAKE_CXX_FLAGS "${CMAKE_C_FLAGS} -maltivec")
++ endif()
++ CHECK_C_COMPILER_FLAG("-mcpu=power8" HAVE_POWER8)
++ if(HAVE_POWER8)
++ message(STATUS " HAVE_POWER8 yes")
++ endif()
++elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "(power|ppc)64")
++ set(HAVE_PPC64 1)
++ message(STATUS " we are ppc64")
+ CHECK_C_COMPILER_FLAG("-maltivec" HAS_ALTIVEC)
+ if(HAS_ALTIVEC)
+ message(STATUS " HAS_ALTIVEC yes")
+diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
+index 66f0c14..38d1913 100644
+--- a/src/CMakeLists.txt
++++ b/src/CMakeLists.txt
+@@ -568,7 +568,9 @@ if(HAVE_INTEL)
+ endif(HAVE_GOOD_YASM_ELF64)
+ elseif(HAVE_POWER8)
+ list(APPEND libcommon_files
+- common/crc32c_ppc.c
++ common/crc32c_ppc.c)
++elseif(HAVE_PPC64LE)
++ list(APPEND libcommon_files
+ common/crc32c_ppc_asm.S
+ common/crc32c_ppc_fast_zero_asm.S)
+ endif(HAVE_INTEL)
+diff --git a/src/arch/ppc.c b/src/arch/ppc.c
+index f21e2fe..11d3a49 100644
+--- a/src/arch/ppc.c
++++ b/src/arch/ppc.c
+@@ -14,10 +14,10 @@ int ceph_arch_ppc_crc32 = 0;
+
+ #include <stdio.h>
+
+-#if __linux__ && __powerpc64__
++#ifdef HAVE_PPC64LE
+ #include <sys/auxv.h>
+ #include <asm/cputable.h>
+-#endif /* __linux__ && __powerpc64__ */
++#endif /* HAVE_PPC64LE */
+
+ #ifndef PPC_FEATURE2_VEC_CRYPTO
+ #define PPC_FEATURE2_VEC_CRYPTO 0x02000000
+@@ -31,9 +31,9 @@ int ceph_arch_ppc_probe(void)
+ {
+ ceph_arch_ppc_crc32 = 0;
+
+-#if __linux__ && __powerpc64__
++#ifdef HAVE_PPC64LE
+ if (getauxval(AT_HWCAP2) & PPC_FEATURE2_VEC_CRYPTO) ceph_arch_ppc_crc32 = 1;
+-#endif /* __linux__ && __powerpc64__ */
++#endif /* HAVE_PPC64LE */
+
+ return 0;
+ }
+diff --git a/src/common/crc32c_ppc.c b/src/common/crc32c_ppc.c
+index 43756e2..52fd1c4 100644
+--- a/src/common/crc32c_ppc.c
++++ b/src/common/crc32c_ppc.c
+@@ -20,6 +20,7 @@
+ #define VMX_ALIGN 16
+ #define VMX_ALIGN_MASK (VMX_ALIGN-1)
+
++#ifdef HAVE_PPC64LE
+ #ifdef REFLECT
+ static unsigned int crc32_align(unsigned int crc, unsigned char const *p,
+ unsigned long len)
+@@ -38,7 +39,6 @@ static unsigned int crc32_align(unsigned int crc, unsigned char const *p,
+ }
+ #endif
+
+-#ifdef HAVE_POWER8
+ static inline unsigned long polynomial_multiply(unsigned int a, unsigned int b) {
+ vector unsigned int va = {a, 0, 0, 0};
+ vector unsigned int vb = {b, 0, 0, 0};
+@@ -134,7 +134,7 @@ uint32_t ceph_crc32c_ppc(uint32_t crc, unsigned char const *data, unsigned len)
+ return crc;
+ }
+
+-#else /* HAVE_POWER8 */
++#else /* HAVE_PPC64LE */
+
+ /* This symbol has to exist on non-ppc architectures (and on legacy
+ * ppc systems using power7 or below) in order to compile properly
+@@ -145,4 +145,4 @@ uint32_t ceph_crc32c_ppc(uint32_t crc, unsigned char const *data, unsigned len)
+ return 0;
+ }
+
+-#endif /* HAVE_POWER8 */
++#endif /* HAVE_PPC64LE */
+--
+2.9.4
+
diff --git a/SOURCES/0003-librbd-Conditionally-import-TrimRequest.cc.patch b/SOURCES/0003-librbd-Conditionally-import-TrimRequest.cc.patch
new file mode 100644
index 0000000..2f02efb
--- /dev/null
+++ b/SOURCES/0003-librbd-Conditionally-import-TrimRequest.cc.patch
@@ -0,0 +1,31 @@
+From 74a754690736f6608b0d4d9c807df0bd777a129d Mon Sep 17 00:00:00 2001
+From: Boris Ranto <branto@redhat.com>
+Date: Fri, 8 Dec 2017 00:21:38 +0100
+Subject: [PATCH] librbd: Conditionally import TrimRequest.cc
+
+We include TrimRequest.cc in librbd tests at two places:
+ - operation/test_mock_TrimRequest.cc
+ - operation/test_mock_ResizeRequest.cc
+
+That causes linking errors when doing the builds because some of the
+structures are defined twice.
+
+Signed-off-by: Boris Ranto <branto@redhat.com>
+---
+ src/librbd/operation/TrimRequest.cc | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/src/librbd/operation/TrimRequest.cc b/src/librbd/operation/TrimRequest.cc
+index 28f2deb..929ca51 100644
+--- a/src/librbd/operation/TrimRequest.cc
++++ b/src/librbd/operation/TrimRequest.cc
+@@ -362,4 +362,6 @@ void TrimRequest<I>::send_finish(int r) {
+ } // namespace operation
+ } // namespace librbd
+
++#ifndef TEST_F
+ template class librbd::operation::TrimRequest<librbd::ImageCtx>;
++#endif
+--
+2.9.5
+
diff --git a/SOURCES/0004-mount-Enlarge-buffer-to-fix-overflow-warning.patch b/SOURCES/0004-mount-Enlarge-buffer-to-fix-overflow-warning.patch
new file mode 100644
index 0000000..a3459cf
--- /dev/null
+++ b/SOURCES/0004-mount-Enlarge-buffer-to-fix-overflow-warning.patch
@@ -0,0 +1,26 @@
+From 5ef603f388957b472326180a1e23ade61e80c163 Mon Sep 17 00:00:00 2001
+From: "Adam C. Emerson" <aemerson@redhat.com>
+Date: Tue, 8 May 2018 16:50:02 -0400
+Subject: [PATCH] mount: Enlarge buffer to fix overflow warning
+
+Signed-off-by: Adam C. Emerson <aemerson@redhat.com>
+---
+ src/mount/canonicalize.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/mount/canonicalize.c b/src/mount/canonicalize.c
+index 7561e41ac5..02efbbedff 100644
+--- a/src/mount/canonicalize.c
++++ b/src/mount/canonicalize.c
+@@ -154,7 +154,7 @@ canonicalize_dm_name(const char *ptname)
+ {
+ FILE *f;
+ size_t sz;
+- char path[256], name[256], *res = NULL;
++ char path[268], name[256], *res = NULL;
+
+ snprintf(path, sizeof(path), "/sys/block/%s/dm/name", ptname);
+ if (!(f = fopen(path, "r")))
+--
+2.14.3
+
diff --git a/SOURCES/0005-Disable-rocksdb-Werror.patch b/SOURCES/0005-Disable-rocksdb-Werror.patch
new file mode 100644
index 0000000..1d083d1
--- /dev/null
+++ b/SOURCES/0005-Disable-rocksdb-Werror.patch
@@ -0,0 +1,33 @@
+diff -ur ceph-12.2.5/src/rocksdb/CMakeLists.txt ceph-12.2.5-mod/src/rocksdb/CMakeLists.txt
+--- ceph-12.2.5/src/rocksdb/CMakeLists.txt 2018-03-12 02:58:51.000000000 +0100
++++ ceph-12.2.5-mod/src/rocksdb/CMakeLists.txt 2018-05-22 19:37:31.767465710 +0200
+@@ -174,15 +174,6 @@
+ PROPERTIES COMPILE_FLAGS "-msse4.2")
+ endif()
+
+-option(FAIL_ON_WARNINGS "Treat compile warnings as errors" ON)
+-if(FAIL_ON_WARNINGS)
+- if(MSVC)
+- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /WX")
+- else() # assume GCC
+- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Werror")
+- endif()
+-endif()
+-
+ option(WITH_ASAN "build with ASAN" OFF)
+ if(WITH_ASAN)
+ add_definitions(-DROCKSDB_TSAN_RUN)
+diff -ur ceph-12.2.5/src/rocksdb/Makefile ceph-12.2.5-mod/src/rocksdb/Makefile
+--- ceph-12.2.5/src/rocksdb/Makefile 2018-03-12 02:58:51.000000000 +0100
++++ ceph-12.2.5-mod/src/rocksdb/Makefile 2018-05-22 19:37:59.043996026 +0200
+@@ -243,10 +243,6 @@
+ WARNING_FLAGS = -W -Wextra -Wall -Wsign-compare -Wshadow \
+ -Wno-unused-parameter
+
+-ifndef DISABLE_WARNING_AS_ERROR
+- WARNING_FLAGS += -Werror
+-endif
+-
+
+ ifdef LUA_PATH
+
diff --git a/SOURCES/0006-python-to-python3.patch b/SOURCES/0006-python-to-python3.patch
new file mode 100644
index 0000000..e9ed766
--- /dev/null
+++ b/SOURCES/0006-python-to-python3.patch
@@ -0,0 +1,72 @@
+diff -ur ceph-12.2.5/src/brag/client/ceph-brag ceph-12.2.5-mod/src/brag/client/ceph-brag
+--- ceph-12.2.5/src/brag/client/ceph-brag 2018-04-23 18:18:33.000000000 +0200
++++ ceph-12.2.5-mod/src/brag/client/ceph-brag 2018-05-22 21:06:32.952813105 +0200
+@@ -1,4 +1,4 @@
+-#!/usr/bin/env python
++#!/usr/bin/env python3
+
+ from __future__ import print_function
+
+diff -ur ceph-12.2.5/src/ceph-create-keys ceph-12.2.5-mod/src/ceph-create-keys
+--- ceph-12.2.5/src/ceph-create-keys 2018-04-23 18:18:33.000000000 +0200
++++ ceph-12.2.5-mod/src/ceph-create-keys 2018-05-22 21:09:49.103398176 +0200
+@@ -1,4 +1,4 @@
+-#!/usr/bin/env python
++#!/usr/bin/env python3
+ import argparse
+ import errno
+ import json
+diff -ur ceph-12.2.5/src/ceph-detect-init/ceph_detect_init/main.py ceph-12.2.5-mod/src/ceph-detect-init/ceph_detect_init/main.py
+--- ceph-12.2.5/src/ceph-detect-init/ceph_detect_init/main.py 2018-04-23 18:18:33.000000000 +0200
++++ ceph-12.2.5-mod/src/ceph-detect-init/ceph_detect_init/main.py 2018-05-22 21:09:14.943993086 +0200
+@@ -1,4 +1,4 @@
+-#!/usr/bin/env python
++#!/usr/bin/env python3
+ #
+ # Copyright (C) 2015 <contact@redhat.com>
+ # Copyright (C) 2015 SUSE LINUX GmbH
+diff -ur ceph-12.2.5/src/ceph-disk/ceph_disk/main.py ceph-12.2.5-mod/src/ceph-disk/ceph_disk/main.py
+--- ceph-12.2.5/src/ceph-disk/ceph_disk/main.py 2018-04-23 18:18:33.000000000 +0200
++++ ceph-12.2.5-mod/src/ceph-disk/ceph_disk/main.py 2018-05-22 21:11:02.606118074 +0200
+@@ -1,4 +1,4 @@
+-#!/usr/bin/env python
++#!/usr/bin/env python3
+ #
+ # Copyright (C) 2015, 2016, 2017 Red Hat <contact@redhat.com>
+ # Copyright (C) 2014 Inktank <info@inktank.com>
+diff -ur ceph-12.2.5/src/ceph-rest-api ceph-12.2.5-mod/src/ceph-rest-api
+--- ceph-12.2.5/src/ceph-rest-api 2018-04-23 18:18:33.000000000 +0200
++++ ceph-12.2.5-mod/src/ceph-rest-api 2018-05-22 21:10:50.202334095 +0200
+@@ -1,4 +1,4 @@
+-#!/usr/bin/env python
++#!/usr/bin/env python3
+ # vim: ts=4 sw=4 smarttab expandtab
+
+ import argparse
+diff -ur ceph-12.2.5/src/ceph-volume/bin/ceph-volume ceph-12.2.5-mod/src/ceph-volume/bin/ceph-volume
+--- ceph-12.2.5/src/ceph-volume/bin/ceph-volume 2018-04-23 18:18:33.000000000 +0200
++++ ceph-12.2.5-mod/src/ceph-volume/bin/ceph-volume 2018-05-22 21:07:43.104592535 +0200
+@@ -1,4 +1,4 @@
+-#!/usr/bin/env python
++#!/usr/bin/env python3
+
+ from ceph_volume import main
+
+diff -ur ceph-12.2.5/src/ceph-volume/bin/ceph-volume-systemd ceph-12.2.5-mod/src/ceph-volume/bin/ceph-volume-systemd
+--- ceph-12.2.5/src/ceph-volume/bin/ceph-volume-systemd 2018-04-23 18:18:33.000000000 +0200
++++ ceph-12.2.5-mod/src/ceph-volume/bin/ceph-volume-systemd 2018-05-22 21:07:46.628531163 +0200
+@@ -1,4 +1,4 @@
+-#!/usr/bin/env python
++#!/usr/bin/env python3
+
+ from ceph_volume.systemd import main
+
+diff -ur ceph-12.2.5/src/mount.fuse.ceph ceph-12.2.5-mod/src/mount.fuse.ceph
+--- ceph-12.2.5/src/mount.fuse.ceph 2018-04-23 18:18:33.000000000 +0200
++++ ceph-12.2.5-mod/src/mount.fuse.ceph 2018-05-22 21:08:06.355187609 +0200
+@@ -1,4 +1,4 @@
+-#!/usr/bin/env python
++#!/usr/bin/env python3
+ '''
+ Helper to mount ceph-fuse from /etc/fstab. To use, add an entry
+ like:
diff --git a/SOURCES/0007-Strip-away-python2.patch b/SOURCES/0007-Strip-away-python2.patch
new file mode 100644
index 0000000..88d7c89
--- /dev/null
+++ b/SOURCES/0007-Strip-away-python2.patch
@@ -0,0 +1,49 @@
+From 680066203eb1e4c7334d4ce84e4b42e97d990ad6 Mon Sep 17 00:00:00 2001
+From: Boris Ranto <branto@redhat.com>
+Date: Wed, 30 May 2018 08:58:47 +0200
+Subject: [PATCH] Strip away python2
+
+---
+ src/CMakeLists.txt | 4 ----
+ src/pybind/CMakeLists.txt | 3 +--
+ 2 files changed, 1 insertion(+), 6 deletions(-)
+
+diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
+index 2b59424f74..788e29c8a2 100644
+--- a/src/CMakeLists.txt
++++ b/src/CMakeLists.txt
+@@ -243,10 +243,6 @@ if(WITH_CEPHFS_JAVA)
+ add_subdirectory(java)
+ endif()
+
+-# Python stuff
+-find_package(PythonInterp 2 REQUIRED)
+-find_package(PythonLibs 2 REQUIRED)
+-
+ option(WITH_PYTHON3 "build python3 bindings" "CHECK")
+ if(WITH_PYTHON3 MATCHES "check|CHECK")
+ find_package(Python3Interp 3 QUIET)
+diff --git a/src/pybind/CMakeLists.txt b/src/pybind/CMakeLists.txt
+index dbdb23f1c5..1a14df972e 100644
+--- a/src/pybind/CMakeLists.txt
++++ b/src/pybind/CMakeLists.txt
+@@ -6,7 +6,6 @@ set(CYTHON_MODULE_DIR ${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/cython_modules)
+ if(WITH_PYTHON3)
+ set(py_vers 3)
+ endif()
+-list(APPEND py_vers 2)
+
+ foreach(python_version ${py_vers})
+ if(${python_version} EQUAL 2)
+@@ -58,7 +57,7 @@ endforeach()
+
+ install(FILES
+ ${CMAKE_CURRENT_SOURCE_DIR}/ceph_rest_api.py
+- DESTINATION ${PYTHON_INSTDIR})
++ DESTINATION ${PYTHON${PYTHON_VERSION}_INSTDIR})
+
+ if(WITH_MGR)
+ # Location needs to match default setting for mgr_module_path, currently:
+--
+2.14.3
+
diff --git a/SOURCES/0008-Fix-python-executable.patch b/SOURCES/0008-Fix-python-executable.patch
new file mode 100644
index 0000000..e803533
--- /dev/null
+++ b/SOURCES/0008-Fix-python-executable.patch
@@ -0,0 +1,23 @@
+From f1d4451ab56bd8b13ffcbafd165d5038bc7a2b19 Mon Sep 17 00:00:00 2001
+From: Boris Ranto <branto@redhat.com>
+Date: Wed, 6 Jun 2018 21:38:47 +0200
+Subject: [PATCH] Fix python executable
+
+Signed-off-by: Boris Ranto <branto@redhat.com>
+---
+ src/ceph.in | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/ceph.in b/src/ceph.in
+index 7c1eda2c09..5e0471cb74 100755
+--- a/src/ceph.in
++++ b/src/ceph.in
+@@ -1,4 +1,4 @@
+-#!@PYTHON_EXECUTABLE@
++#!@PYTHON3_EXECUTABLE@
+ # -*- mode:python -*-
+ # vim: ts=4 sw=4 smarttab expandtab
+ #
+--
+2.14.3
+
diff --git a/SPECS/ceph.spec b/SPECS/ceph.spec
new file mode 100644
index 0000000..a53b38f
--- /dev/null
+++ b/SPECS/ceph.spec
@@ -0,0 +1,1356 @@
+# vim: set noexpandtab ts=8 sw=8 :
+#
+# spec file for package ceph
+#
+# Copyright (C) 2004-2017 The Ceph Project Developers. See COPYING file
+# at the top-level directory of this distribution and at
+# https://github.com/ceph/ceph/blob/master/COPYING
+#
+# All modifications and additions to the file contributed by third parties
+# remain the property of their copyright owners, unless otherwise agreed
+# upon.
+#
+# This file is under the GNU Lesser General Public License, version 2.1
+#
+# Please submit bugfixes or comments via http://tracker.ceph.com/
+#
+%global _hardened_build 1
+
+%bcond_with ocf
+%bcond_with tcmalloc
+%bcond_with lowmem_builder
+%bcond_with lttng
+
+%{!?_udevrulesdir: %global _udevrulesdir /lib/udev/rules.d}
+%{!?tmpfiles_create: %global tmpfiles_create systemd-tmpfiles --create}
+%{!?python3_pkgversion: %global python3_pkgversion 3}
+
+# unify libexec for all targets
+%global _libexecdir %{_exec_prefix}/lib
+
+# disable dwz which compresses the debuginfo
+%global _find_debuginfo_dwz_opts %{nil}
+
+%if ( 0%{?rhel} && 0%{?rhel} < 7 )
+%global _rundir %{_localstatedir}/run
+%else
+%global _rundir /run
+%endif
+
+#################################################################################
+# main package definition
+#################################################################################
+Name: ceph
+Version: 12.2.7
+Release: 9%{?dist}
+%if 0%{?fedora} || 0%{?rhel}
+Epoch: 1
+%endif
+
+# define %%_epoch_prefix macro which will expand to the empty string if %%epoch is undefined
+%global _epoch_prefix %{?epoch:%{epoch}:}
+
+Summary: User space components of the Ceph file system
+License: LGPL-2.1 and CC-BY-SA-1.0 and GPL-2.0 and BSL-1.0 and BSD-3-Clause and MIT
+%if 0%{?suse_version}
+Group: System/Filesystems
+%endif
+URL: http://ceph.com/
+Source0: http://download.ceph.com/tarballs/%{name}-%{version}.tar.gz
+# https://bugzilla.redhat.com/show_bug.cgi?id=1474773
+Patch001: 0001-src-rocksdb-util-murmurhash.patch
+# https://bugzilla.redhat.com/show_bug.cgi?id=1474774
+Patch002: 0002-cmake-Support-ppc64.patch
+Patch003: 0003-librbd-Conditionally-import-TrimRequest.cc.patch
+Patch004: 0004-mount-Enlarge-buffer-to-fix-overflow-warning.patch
+Patch005: 0005-Disable-rocksdb-Werror.patch
+Patch006: 0006-python-to-python3.patch
+Patch007: 0007-Strip-away-python2.patch
+Patch008: 0008-Fix-python-executable.patch
+%if 0%{?suse_version}
+%if 0%{?is_opensuse}
+ExclusiveArch: x86_64 aarch64 ppc64 ppc64le
+%else
+ExclusiveArch: x86_64 aarch64 ppc64le s390x
+%endif
+%endif
+#################################################################################
+# dependencies that apply across all distro families
+#################################################################################
+BuildRequires: bc
+BuildRequires: gperf
+BuildRequires: cmake
+BuildRequires: cryptsetup
+BuildRequires: fuse-devel
+BuildRequires: gcc-c++
+BuildRequires: gdbm
+%if 0%{with tcmalloc}
+BuildRequires: gperftools-devel >= 2.4
+%endif
+BuildRequires: libaio-devel
+BuildRequires: libblkid-devel >= 2.17
+BuildRequires: libcurl-devel
+BuildRequires: libudev-devel
+BuildRequires: libtool
+BuildRequires: libxml2-devel
+BuildRequires: make
+BuildRequires: parted
+BuildRequires: perl
+BuildRequires: pkgconfig
+BuildRequires: python3
+BuildRequires: python3-devel
+BuildRequires: python3-nose
+BuildRequires: python3-requests
+BuildRequires: snappy-devel
+BuildRequires: udev
+BuildRequires: util-linux
+%ifarch %{valgrind_arches}
+BuildRequires: valgrind-devel
+%endif
+BuildRequires: which
+BuildRequires: xfsprogs
+BuildRequires: xfsprogs-devel
+
+#################################################################################
+# distro-conditional dependencies
+#################################################################################
+BuildRequires: boost-random
+BuildRequires: boost-devel
+BuildRequires: nss-devel
+BuildRequires: keyutils-libs-devel
+# RDMA is no longer built on 32-bit ARM: see #1484155
+%ifnarch %{arm}
+BuildRequires: rdma-core-devel
+%endif
+BuildRequires: openldap-devel
+BuildRequires: openssl-devel
+BuildRequires: redhat-lsb-core
+BuildRequires: python3-prettytable
+BuildRequires: python3-sphinx
+BuildRequires: python3-devel
+BuildRequires: python3-setuptools
+BuildRequires: python3-Cython
+# lttng and babeltrace for rbd-replay-prep
+%if %{with lttng}
+%if 0%{?fedora} || 0%{?rhel}
+BuildRequires: lttng-ust-devel
+BuildRequires: libbabeltrace-devel
+%endif
+%if 0%{?suse_version}
+BuildRequires: lttng-ust-devel
+BuildRequires: babeltrace-devel
+%endif
+%endif
+%if 0%{?suse_version}
+BuildRequires: libexpat-devel
+%endif
+%if 0%{?rhel} || 0%{?fedora}
+BuildRequires: expat-devel
+%endif
+#hardened-cc1
+%if 0%{?fedora} || 0%{?rhel}
+BuildRequires: redhat-rpm-config
+%endif
+
+%description
+Ceph is a massively scalable, open-source, distributed storage system that runs
+on commodity hardware and delivers object, block and file system storage.
+
+
+#################################################################################
+# subpackages
+#################################################################################
+
+%package -n ceph-common
+Summary: Ceph Common
+%if 0%{?suse_version}
+Group: System/Filesystems
+%endif
+Requires: librbd1 = %{_epoch_prefix}%{version}-%{release}
+Requires: librados2 = %{_epoch_prefix}%{version}-%{release}
+Requires: libcephfs2 = %{_epoch_prefix}%{version}-%{release}
+Requires: python3-rados = %{_epoch_prefix}%{version}-%{release}
+Requires: python3-rbd = %{_epoch_prefix}%{version}-%{release}
+Requires: python3-cephfs = %{_epoch_prefix}%{version}-%{release}
+Requires: python3-prettytable
+Requires: python3-requests
+%{?systemd_requires}
+%description -n ceph-common
+Common utilities to mount and interact with a ceph storage cluster.
+Comprised of files that are common to Ceph clients and servers.
+
+%if %{with ocf}
+%package resource-agents
+Summary: OCF-compliant resource agents for Ceph daemons
+%if 0%{?suse_version}
+Group: System/Filesystems
+%endif
+Requires: ceph-base = %{_epoch_prefix}%{version}
+Requires: resource-agents
+%description resource-agents
+Resource agents for monitoring and managing Ceph daemons
+under Open Cluster Framework (OCF) compliant resource
+managers such as Pacemaker.
+%endif
+
+%package -n librados2
+Summary: RADOS distributed object store client library
+%if 0%{?suse_version}
+Group: System/Libraries
+%endif
+%if 0%{?rhel} || 0%{?fedora}
+Obsoletes: ceph-libs < %{_epoch_prefix}%{version}-%{release}
+Obsoletes: ceph-libs-compat < %{_epoch_prefix}%{version}-%{release}
+%endif
+%description -n librados2
+RADOS is a reliable, autonomic distributed object storage cluster
+developed as part of the Ceph distributed storage system. This is a
+shared library allowing applications to access the distributed object
+store using a simple file-like interface.
+
+%package -n librados-devel
+Summary: RADOS headers
+%if 0%{?suse_version}
+Group: Development/Libraries/C and C++
+%endif
+Requires: librados2 = %{_epoch_prefix}%{version}-%{release}
+Obsoletes: ceph-devel < %{_epoch_prefix}%{version}-%{release}
+Provides: librados2-devel = %{_epoch_prefix}%{version}-%{release}
+Obsoletes: librados2-devel < %{_epoch_prefix}%{version}-%{release}
+%description -n librados-devel
+This package contains libraries and headers needed to develop programs
+that use RADOS object store.
+
+%package -n python%{python3_pkgversion}-rados
+Summary: Python 3 libraries for the RADOS object store
+%if 0%{?suse_version}
+Group: Development/Languages/Python
+%endif
+Requires: %{__python3}
+Requires: librados2 = %{_epoch_prefix}%{version}-%{release}
+%description -n python%{python3_pkgversion}-rados
+This package contains Python 3 libraries for interacting with Cephs RADOS
+object store.
+
+%package -n libradosstriper1
+Summary: RADOS striping interface
+%if 0%{?suse_version}
+Group: System/Libraries
+%endif
+Requires: librados2 = %{_epoch_prefix}%{version}-%{release}
+%description -n libradosstriper1
+Striping interface built on top of the rados library, allowing
+to stripe bigger objects onto several standard rados objects using
+an interface very similar to the rados one.
+
+%package -n libradosstriper-devel
+Summary: RADOS striping interface headers
+%if 0%{?suse_version}
+Group: Development/Libraries/C and C++
+%endif
+Requires: libradosstriper1 = %{_epoch_prefix}%{version}-%{release}
+Requires: librados-devel = %{_epoch_prefix}%{version}-%{release}
+Obsoletes: ceph-devel < %{_epoch_prefix}%{version}-%{release}
+Provides: libradosstriper1-devel = %{_epoch_prefix}%{version}-%{release}
+Obsoletes: libradosstriper1-devel < %{_epoch_prefix}%{version}-%{release}
+%description -n libradosstriper-devel
+This package contains libraries and headers needed to develop programs
+that use RADOS striping interface.
+
+%package -n librbd1
+Summary: RADOS block device client library
+%if 0%{?suse_version}
+Group: System/Libraries
+%endif
+Requires: librados2 = %{_epoch_prefix}%{version}-%{release}
+%if 0%{?suse_version}
+Requires(post): coreutils
+%endif
+%if 0%{?rhel} || 0%{?fedora}
+Obsoletes: ceph-libs < %{_epoch_prefix}%{version}-%{release}
+Obsoletes: ceph-libs-compat < %{_epoch_prefix}%{version}-%{release}
+%endif
+%description -n librbd1
+RBD is a block device striped across multiple distributed objects in
+RADOS, a reliable, autonomic distributed object storage cluster
+developed as part of the Ceph distributed storage system. This is a
+shared library allowing applications to manage these block devices.
+
+%package -n librbd-devel
+Summary: RADOS block device headers
+%if 0%{?suse_version}
+Group: Development/Libraries/C and C++
+%endif
+Requires: librbd1 = %{_epoch_prefix}%{version}-%{release}
+Requires: librados-devel = %{_epoch_prefix}%{version}-%{release}
+Obsoletes: ceph-devel < %{_epoch_prefix}%{version}-%{release}
+Provides: librbd1-devel = %{_epoch_prefix}%{version}-%{release}
+Obsoletes: librbd1-devel < %{_epoch_prefix}%{version}-%{release}
+%description -n librbd-devel
+This package contains libraries and headers needed to develop programs
+that use RADOS block device.
+
+%package -n python%{python3_pkgversion}-rbd
+Summary: Python 3 libraries for the RADOS block device
+%if 0%{?suse_version}
+Group: Development/Languages/Python
+%endif
+Requires: librbd1 = %{_epoch_prefix}%{version}-%{release}
+Requires: python%{python3_pkgversion}-rados = %{_epoch_prefix}%{version}-%{release}
+%description -n python%{python3_pkgversion}-rbd
+This package contains Python 3 libraries for interacting with Cephs RADOS
+block device.
+
+%package -n libcephfs2
+Summary: Ceph distributed file system client library
+%if 0%{?suse_version}
+Group: System/Libraries
+%endif
+Obsoletes: libcephfs1
+%if 0%{?rhel} || 0%{?fedora}
+Obsoletes: ceph-libs < %{_epoch_prefix}%{version}-%{release}
+Obsoletes: ceph-libs-compat < %{_epoch_prefix}%{version}-%{release}
+Obsoletes: ceph-libcephfs
+%endif
+%description -n libcephfs2
+Ceph is a distributed network file system designed to provide excellent
+performance, reliability, and scalability. This is a shared library
+allowing applications to access a Ceph distributed file system via a
+POSIX-like interface.
+
+%package -n libcephfs-devel
+Summary: Ceph distributed file system headers
+%if 0%{?suse_version}
+Group: Development/Libraries/C and C++
+%endif
+Requires: libcephfs2 = %{_epoch_prefix}%{version}-%{release}
+Requires: librados-devel = %{_epoch_prefix}%{version}-%{release}
+Obsoletes: ceph-devel < %{_epoch_prefix}%{version}-%{release}
+Provides: libcephfs2-devel = %{_epoch_prefix}%{version}-%{release}
+Obsoletes: libcephfs2-devel < %{_epoch_prefix}%{version}-%{release}
+%description -n libcephfs-devel
+This package contains libraries and headers needed to develop programs
+that use Cephs distributed file system.
+
+%package -n python%{python3_pkgversion}-cephfs
+Summary: Python 3 libraries for Ceph distributed file system
+%if 0%{?suse_version}
+Group: Development/Languages/Python
+%endif
+Requires: libcephfs2 = %{_epoch_prefix}%{version}-%{release}
+Requires: python%{python3_pkgversion}-rados = %{_epoch_prefix}%{version}-%{release}
+%description -n python%{python3_pkgversion}-cephfs
+This package contains Python 3 libraries for interacting with Cephs distributed
+file system.
+
+#################################################################################
+# common
+#################################################################################
+%prep
+%autosetup -p1 -n %{name}-%{version}
+
+%build
+%if %{with lowmem_builder}
+RPM_OPT_FLAGS="$RPM_OPT_FLAGS --param ggc-min-expand=20 --param ggc-min-heapsize=32768"
+%endif
+%ifnarch armv7hl
+export RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS | sed -e 's/i386/i486/'`
+%else
+export RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS | sed -e 's/i386/i486/' -e 's/-pipe//g'`
+%endif
+
+export CPPFLAGS="$java_inc"
+export CFLAGS="$RPM_OPT_FLAGS"
+export CXXFLAGS="$RPM_OPT_FLAGS"
+export LDFLAGS="$RPM_LD_FLAGS"
+
+env | sort
+
+%if %{with lowmem_builder}
+%ifnarch armv7hl
+%if 0%{?jobs} > 8
+%define _smp_mflags -j8
+%endif
+%else
+%define _smp_mflags -j1
+%endif
+%endif
+
+# unlimit _smp_mflags in system macro if not set above
+# Brew cannot handle -j24 here
+%define _smp_ncpus_max 16
+# extract the number of processors for use with cmake
+%define _smp_ncpus %(echo %{_smp_mflags} | sed 's/-j//')
+
+mkdir build
+cd build
+cmake .. \
+ -DCMAKE_INSTALL_PREFIX=%{_prefix} \
+ -DCMAKE_INSTALL_LIBDIR=%{_libdir} \
+ -DCMAKE_INSTALL_LIBEXECDIR=%{_libexecdir} \
+ -DCMAKE_INSTALL_LOCALSTATEDIR=%{_localstatedir} \
+ -DCMAKE_INSTALL_SYSCONFDIR=%{_sysconfdir} \
+ -DCMAKE_INSTALL_MANDIR=%{_mandir} \
+ -DCMAKE_INSTALL_DOCDIR=%{_docdir}/ceph \
+ -DCMAKE_INSTALL_INCLUDEDIR=%{_includedir} \
+ -DWITH_MGR=OFF \
+ -DWITH_EMBEDDED=OFF \
+ -DWITH_MANPAGE=ON \
+ -DWITH_PYTHON3=ON \
+ -DWITH_SYSTEMD=ON \
+ -DWITH_SYSTEM_BOOST=ON \
+ -DWITH_SPDK=OFF \
+ -DWITH_PMEM=OFF \
+ -DWITH_BLUESTORE=OFF \
+ -DWITH_BOOST_CONTEXT=OFF \
+ -DWITH_LEVELDB=OFF \
+ -DWITH_RADOSGW=OFF \
+%if ( ( 0%{?rhel} && 0%{?rhel} <= 7) && ! 0%{?centos} )
+ -DWITH_SUBMAN=ON \
+%endif
+ -DWITH_TESTS=OFF \
+%if %{with lttng}
+ -DWITH_LTTNG=ON \
+ -DWITH_BABELTRACE=ON \
+%else
+ -DWITH_LTTNG=OFF \
+ -DWITH_BABELTRACE=OFF \
+%endif
+ $CEPH_EXTRA_CMAKE_ARGS \
+%if 0%{with ocf}
+ -DWITH_OCF=ON \
+%endif
+%ifarch aarch64 armv7hl mips mipsel ppc ppc64 ppc64le %{ix86} x86_64
+ -DWITH_RADOSGW_BEAST_FRONTEND=ON \
+%else
+ -DWITH_RADOSGW_BEAST_FRONTEND=OFF \
+%endif
+%ifnarch %{arm}
+ -DWITH_RDMA=OFF \
+%endif
+ -DBOOST_J=%{_smp_ncpus}
+
+make %{?_smp_mflags}
+
+
+%install
+pushd build
+make DESTDIR=%{buildroot} install
+# we have dropped sysvinit bits
+rm -f %{buildroot}/%{_sysconfdir}/init.d/ceph
+popd
+install -m 0644 -D src/etc-rbdmap %{buildroot}%{_sysconfdir}/ceph/rbdmap
+install -m 0644 -D systemd/ceph.tmpfiles.d %{buildroot}%{_tmpfilesdir}/ceph-common.conf
+mkdir -p %{buildroot}%{_sbindir}
+chmod 0644 %{buildroot}%{_docdir}/ceph/sample.ceph.conf
+install -m 0644 -D COPYING %{buildroot}%{_docdir}/ceph/COPYING
+
+# firewall templates and /sbin/mount.ceph symlink
+%if 0%{?suse_version}
+mkdir -p %{buildroot}/sbin
+ln -sf %{_sbindir}/mount.ceph %{buildroot}/sbin/mount.ceph
+%endif
+
+# udev rules
+install -m 0644 -D udev/50-rbd.rules %{buildroot}%{_udevrulesdir}/50-rbd.rules
+
+#set up placeholder directories
+mkdir -p %{buildroot}%{_sysconfdir}/ceph
+mkdir -p %{buildroot}%{_rundir}/ceph
+mkdir -p %{buildroot}%{_localstatedir}/log/ceph
+mkdir -p %{buildroot}%{_localstatedir}/lib/ceph
+
+# Remove the rbd/fuse bits
+rm -f %{buildroot}%{_bindir}/ceph-fuse
+rm -f %{buildroot}%{_mandir}/man8/ceph-fuse.8*
+rm -f %{buildroot}%{_sbindir}/mount.fuse.ceph
+rm -f %{buildroot}%{_unitdir}/ceph-fuse@.service
+rm -f %{buildroot}%{_unitdir}/ceph-fuse.target
+rm -f %{buildroot}%{_bindir}/rbd-fuse
+rm -f %{buildroot}%{_mandir}/man8/rbd-fuse.8*
+
+# Remove the ceph-base package
+rm -f %{buildroot}%{_bindir}/crushtool
+rm -f %{buildroot}%{_bindir}/monmaptool
+rm -f %{buildroot}%{_bindir}/osdmaptool
+rm -f %{buildroot}%{_bindir}/ceph-run
+rm -f %{buildroot}%{_bindir}/ceph-detect-init
+rm -f %{buildroot}%{_sbindir}/ceph-create-keys
+rm -f %{buildroot}%{_sbindir}/ceph-disk
+rm -f %{buildroot}%{_sbindir}/ceph-volume
+rm -f %{buildroot}%{_sbindir}/ceph-volume-systemd
+rm -f %{buildroot}%{_libexecdir}/ceph/ceph_common.sh
+rm -rf %{buildroot}%{_libdir}/rados-classes
+rm -f %{buildroot}%{_libdir}/rados-classes/*
+rm -rf %{buildroot}%{_libdir}/ceph/erasure-code
+rm -f %{buildroot}%{_libdir}/ceph/erasure-code/libec_*.so*
+rm -rf %{buildroot}%{_libdir}/ceph/compressor
+rm -f %{buildroot}%{_libdir}/ceph/compressor/libceph_*.so*
+rm -rf %{buildroot}%{_libdir}/ceph/crypto
+rm -f %{buildroot}%{_libdir}/ceph/crypto/libceph_*.so*
+rm -f %{buildroot}%{_libdir}/libos_tp.so*
+rm -f %{buildroot}%{_libdir}/libosd_tp.so*
+rm -f %{buildroot}%{_localstatedir}/adm/fillup-templates/sysconfig.*
+rm -f %{buildroot}%{_unitdir}/ceph-disk@.service
+rm -f %{buildroot}%{_unitdir}/ceph-volume@.service
+rm -f %{buildroot}%{_unitdir}/ceph.target
+rm -rf %{buildroot}%{python_sitelib}/ceph_detect_init*
+rm -rf %{buildroot}%{python_sitelib}/ceph_disk*
+rm -rf %{buildroot}%{python_sitelib}/ceph_volume/*
+rm -rf %{buildroot}%{python_sitelib}/ceph_volume-*
+rm -f %{buildroot}%{_mandir}/man8/ceph-deploy.8*
+rm -f %{buildroot}%{_mandir}/man8/ceph-detect-init.8*
+rm -f %{buildroot}%{_mandir}/man8/ceph-create-keys.8*
+rm -f %{buildroot}%{_mandir}/man8/ceph-disk.8*
+rm -f %{buildroot}%{_mandir}/man8/ceph-volume.8*
+rm -f %{buildroot}%{_mandir}/man8/ceph-volume-systemd.8*
+rm -f %{buildroot}%{_mandir}/man8/ceph-run.8*
+rm -f %{buildroot}%{_mandir}/man8/crushtool.8*
+rm -f %{buildroot}%{_mandir}/man8/osdmaptool.8*
+rm -f %{buildroot}%{_mandir}/man8/monmaptool.8*
+
+# Remove the ceph-mds package
+rm -f %{buildroot}%{_bindir}/ceph-mds
+rm -f %{buildroot}%{_mandir}/man8/ceph-mds.8*
+rm -f %{buildroot}%{_unitdir}/ceph-mds@.service
+rm -f %{buildroot}%{_unitdir}/ceph-mds.target
+
+# Remove the ceph-mgr package
+rm -f %{buildroot}%{_bindir}/ceph-mgr
+rm -rf %{buildroot}%{_libdir}/ceph/mgr
+rm -f %{buildroot}%{_unitdir}/ceph-mgr@.service
+rm -f %{buildroot}%{_unitdir}/ceph-mgr.target
+
+# Remove the ceph-mon package
+rm -f %{buildroot}%{_bindir}/ceph-mon
+rm -f %{buildroot}%{_bindir}/ceph-rest-api
+rm -f %{buildroot}%{_mandir}/man8/ceph-mon.8*
+rm -f %{buildroot}%{_mandir}/man8/ceph-rest-api.8*
+rm -f %{buildroot}%{python3_sitelib}/__pycache__/ceph_rest_api.*
+rm -f %{buildroot}%{python3_sitelib}/ceph_rest_api.py*
+rm -f %{buildroot}%{_unitdir}/ceph-mon@.service
+rm -f %{buildroot}%{_unitdir}/ceph-mon.target
+
+# Remove the ceph-radosgw package
+rm -f %{buildroot}%{_bindir}/radosgw
+rm -f %{buildroot}%{_bindir}/radosgw-token
+rm -f %{buildroot}%{_bindir}/radosgw-es
+rm -f %{buildroot}%{_bindir}/radosgw-object-expirer
+rm -f %{buildroot}%{_mandir}/man8/radosgw.8*
+rm -f %{buildroot}%{_unitdir}/ceph-radosgw@.service
+rm -f %{buildroot}%{_unitdir}/ceph-radosgw.target
+
+# Remove the ceph-osd package
+rm -f %{buildroot}%{_bindir}/ceph-clsinfo
+rm -f %{buildroot}%{_bindir}/ceph-bluestore-tool
+rm -f %{buildroot}%{_bindir}/ceph-objectstore-tool
+rm -f %{buildroot}%{_bindir}/ceph-osd
+rm -f %{buildroot}%{_libexecdir}/ceph/ceph-osd-prestart.sh
+#rm -rf %{buildroot}%dir %{_udevrulesdir}
+rm -f %{buildroot}%{_mandir}/man8/ceph-clsinfo.8*
+rm -f %{buildroot}%{_mandir}/man8/ceph-osd.8*
+rm -f %{buildroot}%{_mandir}/man8/ceph-bluestore-tool.8*
+rm -f %{buildroot}%{_unitdir}/ceph-osd@.service
+rm -f %{buildroot}%{_unitdir}/ceph-osd.target
+
+# Remove debuginfo for server bits
+rm -f %{buildroot}/usr/lib/debug/%{_bindir}/ceph-fuse-*
+rm -f %{buildroot}/usr/lib/debug/%{_bindir}/rbd-fuse-*
+
+# Remove incorrectly installed man page
+rm -f %{buildroot}%{_mandir}/man8/ceph-kvstore-tool.8*
+
+# Make sure radosgw bits do not exist
+rm -f %{buildroot}%{_bindir}/radosgw-admin
+rm -f %{buildroot}%{_mandir}/man8/radosgw-admin.8*
+rm -f %{buildroot}%{_sysconfdir}/bash_completion.d/radosgw-admin
+
+# Remove rbd-mirror
+rm -f %{buildroot}%{_bindir}/rbd-mirror
+rm -f %{buildroot}%{_mandir}/man8/rbd-mirror.8*
+rm -f %{buildroot}%{_unitdir}/ceph-rbd-mirror@.service
+rm -f %{buildroot}%{_unitdir}/ceph-rbd-mirror.target
+
+# Remove rbd-nbd
+rm -f %{buildroot}%{_bindir}/rbd-nbd
+rm -f %{buildroot}%{_mandir}/man8/rbd-nbd.8*
+
+# Remove rados-objclass-devel
+rm -f %{buildroot}%{_includedir}/rados/objclass.h
+
+%clean
+rm -rf %{buildroot}
+
+#################################################################################
+# files and systemd scriptlets
+#################################################################################
+%files common
+%dir %{_docdir}/ceph
+%doc %{_docdir}/ceph/sample.ceph.conf
+%doc %{_docdir}/ceph/COPYING
+%{_bindir}/ceph
+%{_bindir}/ceph-authtool
+%{_bindir}/ceph-conf
+%{_bindir}/ceph-dencoder
+%{_bindir}/ceph-rbdnamer
+%{_bindir}/ceph-syn
+%{_bindir}/ceph-crush-location
+%{_bindir}/cephfs-data-scan
+%{_bindir}/cephfs-journal-tool
+%{_bindir}/cephfs-table-tool
+%{_bindir}/rados
+%{_bindir}/rbd
+%{_bindir}/rbd-replay
+%{_bindir}/rbd-replay-many
+%{_bindir}/rbdmap
+%{_sbindir}/mount.ceph
+%if 0%{?suse_version}
+/sbin/mount.ceph
+%endif
+%if %{with lttng}
+%{_bindir}/rbd-replay-prep
+%endif
+%{_bindir}/ceph-post-file
+%{_bindir}/ceph-brag
+%{_tmpfilesdir}/ceph-common.conf
+%{_mandir}/man8/ceph-authtool.8*
+%{_mandir}/man8/ceph-conf.8*
+%{_mandir}/man8/ceph-dencoder.8*
+%{_mandir}/man8/ceph-rbdnamer.8*
+%{_mandir}/man8/ceph-syn.8*
+%{_mandir}/man8/ceph-post-file.8*
+%{_mandir}/man8/ceph.8*
+%{_mandir}/man8/mount.ceph.8*
+%{_mandir}/man8/rados.8*
+%{_mandir}/man8/rbd.8*
+%{_mandir}/man8/rbdmap.8*
+%{_mandir}/man8/rbd-replay.8*
+%{_mandir}/man8/rbd-replay-many.8*
+%{_mandir}/man8/rbd-replay-prep.8*
+%dir %{_datadir}/ceph/
+%{_datadir}/ceph/known_hosts_drop.ceph.com
+%{_datadir}/ceph/id_rsa_drop.ceph.com
+%{_datadir}/ceph/id_rsa_drop.ceph.com.pub
+%dir %{_sysconfdir}/ceph/
+%config %{_sysconfdir}/bash_completion.d/ceph
+%config %{_sysconfdir}/bash_completion.d/rados
+%config %{_sysconfdir}/bash_completion.d/rbd
+%config(noreplace) %{_sysconfdir}/ceph/rbdmap
+%{_unitdir}/rbdmap.service
+%{python3_sitelib}/ceph_argparse.py*
+%{python3_sitelib}/__pycache__/ceph_argparse.cpython*.py*
+%{python3_sitelib}/ceph_daemon.py*
+%{python3_sitelib}/__pycache__/ceph_daemon.cpython*.py*
+%dir %{_udevrulesdir}
+%{_udevrulesdir}/50-rbd.rules
+%attr(3770,ceph,ceph) %dir %{_localstatedir}/log/ceph/
+%attr(750,ceph,ceph) %dir %{_localstatedir}/lib/ceph/
+
+%pre common
+CEPH_GROUP_ID=167
+CEPH_USER_ID=167
+%if 0%{?rhel} || 0%{?fedora}
+/usr/sbin/groupadd ceph -g $CEPH_GROUP_ID -o -r 2>/dev/null || :
+/usr/sbin/useradd ceph -u $CEPH_USER_ID -o -r -g ceph -s /sbin/nologin -c "Ceph daemons" -d %{_localstatedir}/lib/ceph 2>/dev/null || :
+%endif
+%if 0%{?suse_version}
+if ! getent group ceph >/dev/null ; then
+ CEPH_GROUP_ID_OPTION=""
+ getent group $CEPH_GROUP_ID >/dev/null || CEPH_GROUP_ID_OPTION="-g $CEPH_GROUP_ID"
+ groupadd ceph $CEPH_GROUP_ID_OPTION -r 2>/dev/null || :
+fi
+if ! getent passwd ceph >/dev/null ; then
+ CEPH_USER_ID_OPTION=""
+ getent passwd $CEPH_USER_ID >/dev/null || CEPH_USER_ID_OPTION="-u $CEPH_USER_ID"
+ useradd ceph $CEPH_USER_ID_OPTION -r -g ceph -s /sbin/nologin 2>/dev/null || :
+fi
+usermod -c "Ceph storage service" \
+ -d %{_localstatedir}/lib/ceph \
+ -g ceph \
+ -s /sbin/nologin \
+ ceph
+%endif
+exit 0
+
+%post common
+%tmpfiles_create %{_tmpfilesdir}/ceph-common.conf
+
+%postun common
+# Package removal cleanup
+if [ "$1" -eq "0" ] ; then
+ rm -rf %{_localstatedir}/log/ceph
+ rm -rf %{_sysconfdir}/ceph
+fi
+
+%if %{with ocf}
+
+%files resource-agents
+%dir %{_prefix}/lib/ocf
+%dir %{_prefix}/lib/ocf/resource.d
+%dir %{_prefix}/lib/ocf/resource.d/ceph
+%{_prefix}/lib/ocf/resource.d/ceph/rbd
+
+%endif
+
+%files -n librados2
+%{_libdir}/librados.so.*
+%dir %{_libdir}/ceph
+%{_libdir}/ceph/libceph-common.so*
+%if %{with lttng}
+%{_libdir}/librados_tp.so.*
+%endif
+
+%post -n librados2 -p /sbin/ldconfig
+
+%postun -n librados2 -p /sbin/ldconfig
+
+%files -n librados-devel
+%dir %{_includedir}/rados
+%{_includedir}/rados/librados.h
+%{_includedir}/rados/librados.hpp
+%{_includedir}/rados/buffer.h
+%{_includedir}/rados/buffer_fwd.h
+%{_includedir}/rados/inline_memory.h
+%{_includedir}/rados/page.h
+%{_includedir}/rados/crc32c.h
+%{_includedir}/rados/rados_types.h
+%{_includedir}/rados/rados_types.hpp
+%{_includedir}/rados/memory.h
+%{_libdir}/librados.so
+%if %{with lttng}
+%{_libdir}/librados_tp.so
+%endif
+%{_bindir}/librados-config
+%{_mandir}/man8/librados-config.8*
+
+%files -n python%{python3_pkgversion}-rados
+%{python3_sitearch}/rados.cpython*.so
+%{python3_sitearch}/rados-*.egg-info
+
+%files -n libradosstriper1
+%{_libdir}/libradosstriper.so.*
+
+%post -n libradosstriper1 -p /sbin/ldconfig
+
+%postun -n libradosstriper1 -p /sbin/ldconfig
+
+%files -n libradosstriper-devel
+%dir %{_includedir}/radosstriper
+%{_includedir}/radosstriper/libradosstriper.h
+%{_includedir}/radosstriper/libradosstriper.hpp
+%{_libdir}/libradosstriper.so
+
+%files -n librbd1
+%{_libdir}/librbd.so.*
+%if %{with lttng}
+%{_libdir}/librbd_tp.so.*
+%endif
+
+%post -n librbd1 -p /sbin/ldconfig
+
+%postun -n librbd1 -p /sbin/ldconfig
+
+%files -n librbd-devel
+%dir %{_includedir}/rbd
+%{_includedir}/rbd/librbd.h
+%{_includedir}/rbd/librbd.hpp
+%{_includedir}/rbd/features.h
+%{_libdir}/librbd.so
+%if %{with lttng}
+%{_libdir}/librbd_tp.so
+%endif
+
+%files -n python%{python3_pkgversion}-rbd
+%{python3_sitearch}/rbd.cpython*.so
+%{python3_sitearch}/rbd-*.egg-info
+
+%files -n libcephfs2
+%{_libdir}/libcephfs.so.*
+
+%post -n libcephfs2 -p /sbin/ldconfig
+
+%postun -n libcephfs2 -p /sbin/ldconfig
+
+%files -n libcephfs-devel
+%dir %{_includedir}/cephfs
+%{_includedir}/cephfs/libcephfs.h
+%{_includedir}/cephfs/ceph_statx.h
+%{_libdir}/libcephfs.so
+
+%files -n python%{python3_pkgversion}-cephfs
+%{python3_sitearch}/cephfs.cpython*.so
+%{python3_sitearch}/cephfs-*.egg-info
+%{python3_sitelib}/ceph_volume_client.py
+%{python3_sitelib}/__pycache__/ceph_volume_client.cpython*.py*
+
+
+%changelog
+* Wed Oct 03 2018 Boris Ranto <branto@redhat.com> - 1:12.2.7-9
+- fix link-time hardening (1630554)
+
+* Tue Sep 25 2018 Boris Ranto <branto@redhat.com> - 1:12.2.7-8
+- do not require yasm
+- strip away crypto implementations
+
+* Wed Sep 19 2018 Tomas Orsava <torsava@redhat.com> - 1:12.2.7-7
+- Require the Python interpreter directly instead of using the package name
+- Related: rhbz#1619153
+
+* Fri Sep 14 2018 Boris Ranto <branto@redhat.com> - 1:12.2.7-6
+- Drop ceph-resource-agents
+
+* Wed Sep 12 2018 Boris Ranto <branto@redhat.com> - 1:12.2.7-5
+- Reintroduce libradosstriper for /usr/bin/rados binary
+
+* Fri Aug 3 2018 Florian Weimer <fweimer@redhat.com> - 1:12.2.7-4
+- Honor %%{valgrind_arches}
+
+* Mon Jul 30 2018 Florian Weimer <fweimer@redhat.com> - 1:12.2.7-3
+- Rebuild with fixed binutils
+
+* Wed Jul 25 2018 Petr Kubat <pkubat@redhat.com> - 1:12.2.7-2
+- Rebuilt for gdbm
+
+* Tue Jul 17 2018 Boris Ranto <branto@redhat.com> - 2:12.2.7-1
+- Rebase to latest luminous
+
+* Fri Jul 13 2018 Boris Ranto <branto@redhat.com> - 2:12.2.6-1
+- Rebase to fix the recent ceph CVEs
+
+* Fri Jun 22 2018 Boris Ranto <branto@redhat.com> - 2:12.2.5-5
+- Remove virtualenv dependency
+
+* Wed Jun 20 2018 Boris Ranto <branto@redhat.com> - 2:12.2.5-4
+- Strip away xmlstarlet
+
+* Wed Jun 06 2018 Boris Ranto <branto@redhat.com> - 2:12.2.5-3
+- Strip away further dependencies
+- Remove more packages
+- Strip sourca tarball from boost sources
+
+* Wed May 30 2018 Boris Ranto <branto@redhat.com> - 2:12.2.5-2
+- Strip out btrfs-progs
+
+* Tue May 22 2018 Boris Ranto <branto@redhat.com> - 2:12.2.5-1
+- update to latest luminous release
+
+* Tue May 01 2018 Boris Ranto <branto@redhat.com> - 2:12.2.2-3
+- clean-up the spec file
+- remove old dependencies
+- enable ocf build
+
+* Mon Apr 30 2018 Boris Ranto <branto@redhat.com> - 1:12.2.2-2
+- Strip away unnecessary packages
+
+* Tue Dec 5 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.2.2-1
+- New release (1:12.2.2-1)
+- Fix build error on arm
+
+* Thu Oct 05 2017 Boris Ranto <branto@redhat.com> - 1:12.2.1-2
+- Obsolete ceph-libs-compat package
+
+* Wed Sep 27 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.2.1-1
+- New release (1:12.2.1-1)
+
+* Tue Aug 29 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.2.0-1
+- New release (1:12.2.0-1)
+
+* Thu Aug 24 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.1.4-5
+- libibverbs(-devel) is superceded by rdma-core(-devel), again
+
+* Thu Aug 24 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.1.4-4
+- libibverbs(-devel) is superceded by rdma-core(-devel)
+
+* Tue Aug 22 2017 Adam Williamson <awilliam@redhat.com> - 1:12.1.4-3
+- Disable RDMA support on 32-bit ARM (#1484155)
+
+* Thu Aug 17 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.1.4-2
+- fix %%epoch in comment, ppc64le lowmem_builder
+
+* Wed Aug 16 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.1.4-1
+- New release (1:12.1.4-1)
+
+* Sat Aug 12 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.1.3-1
+- New release (1:12.1.3-1)
+
+* Fri Aug 11 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.1.2-3
+- rebuild with librpm.so.7
+
+* Thu Aug 10 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.1.2-2
+- Fix 32-bit alignment
+
+* Thu Aug 3 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.1.2-1
+- New release (1:12.1.2-1)
+
+* Tue Aug 1 2017 Boris Ranto <branto@redhat.com> - 1:12.1.1-8
+- Fix ppc64 build
+
+* Tue Aug 1 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.1.1-7
+- python34 and other nits
+- still no fix for ppc64
+
+* Sun Jul 30 2017 Florian Weimer <fweimer@redhat.com> - 1:12.1.1-6
+- Reenable ppc64le, with binutils fix for ppc64le (#1475636)
+
+* Fri Jul 28 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.1.1-5
+- ppc64le disabled until bz #1475636 resolution
+
+* Fri Jul 28 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.1.1-4
+- 12.1.1 w/ hacks for armv7hl: low mem, no java jni
+- WTIH_BABELTRACE -> WITH_BABELTRACE for all archs
+- still no fix for ppc64
+
+* Wed Jul 26 2017 Fedora Release Engineering <releng@fedoraproject.org> - 1:12.1.1-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
+
+* Sat Jul 22 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.1.1-2
+- 12.1.1 w/ rocksdb patch (i686)
+
+* Sat Jul 22 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.1.1-1
+- New release (1:12.1.1-1)
+
+* Fri Jul 21 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:12.1.1-0
+- New release (1:12.1.1-0)
+
+* Fri Jul 21 2017 Kalev Lember <klember@redhat.com> - 1:10.2.7-3
+- Rebuilt for Boost 1.64
+
+* Mon May 15 2017 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:10.2.7-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_27_Mass_Rebuild
+
+* Mon Apr 17 2017 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 1:10.2.7-1
+- New release (1:10.2.7-1)
+
+* Wed Feb 08 2017 Boris Ranto <branto@redhat.com> - 1:10.2.5-2
+- New release (1:10.2.5-2)
+
+* Fri Jan 13 2017 Boris Ranto <branto@redhat.com> - 1:10.2.5-1
+- New release (1:10.2.5-1)
+- hack: do not test for libxfs, assume it is present
+
+* Wed Dec 14 2016 Boris Ranto <branto@redhat.com> - 1:10.2.4-2
+- New version (1:10.2.4-2)
+- This syncs up with the upstream 10.2.5
+- Doing it this way because of broken lookaside cache
+- Fix the -devel obsoletes
+
+* Thu Dec 08 2016 Boris Ranto <branto@redhat.com> - 1:10.2.4-1
+- New version (1:10.2.4-1)
+- Disable erasure_codelib neon build
+- Use newer -devel package format
+- Sync up the spec file
+
+* Wed Oct 26 2016 Ken Dreyer <ktdreyer@ktdreyer.com> 1:10.2.3-4
+- librgw: add API version defines for librgw and rgw_file
+
+* Wed Oct 26 2016 Ken Dreyer <ktdreyer@ktdreyer.com> 1:10.2.3-3
+- update patches style for rdopkg
+
+* Thu Sep 29 2016 Boris Ranto <branto@redhat.com> - 1:10.2.3-2
+- New release (1:10.2.3-2)
+- common: instantiate strict_si_cast<long> not
+
+* Thu Sep 29 2016 Boris Ranto <branto@redhat.com> - 1:10.2.3-1
+- New version (1:10.2.3-1)
+- Disable erasure_codelib neon build
+
+* Sun Aug 07 2016 Igor Gnatenko <ignatenko@redhat.com> - 1:10.2.2-4
+- Rebuild for LevelDB 1.18
+
+* Tue Jul 19 2016 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:10.2.2-3
+- https://fedoraproject.org/wiki/Changes/Automatic_Provides_for_Python_RPM_Packages
+
+* Tue Jun 21 2016 Boris Ranto <branto@redhat.com> - 1:10.2.2-2
+- New release (1:10.2.2-2)
+- fix tcmalloc handling in spec file
+
+* Mon Jun 20 2016 Boris Ranto <branto@redhat.com> - 1:10.2.2-1
+- New version (1:10.2.2-1)
+- Disable erasure_codelib neon build
+- Do not use -momit-leaf-frame-pointer flag
+
+* Mon May 16 2016 Boris Ranto <branto@redhat.com> - 1:10.2.1-1
+- New version (1:10.2.1-1)
+- Disable erasure_codelib neon build
+- Do not use -momit-leaf-frame-pointer flag
+
+* Fri May 06 2016 Dan Horák <dan[at]danny.cz> - 10.2.0-3
+- fix build on s390(x) - gperftools/tcmalloc not available there
+
+* Fri Apr 22 2016 Boris Ranto <branto@redhat.com> - 10.2.0-2
+- Do not use -momit-leaf-frame-pointer flag
+
+* Fri Apr 22 2016 Boris Ranto <branto@redhat.com> - -
+- Rebase to version 10.2.0
+- Disable erasure_codelib neon build
+
+* Mon Apr 11 2016 Richard W.M. Jones <rjones@redhat.com> - 1:9.2.0-5
+- Fix large startup times of processes linking to -lrbd.
+ Backport upstream commit 1c2831a2, fixes RHBZ#1319483.
+- Add workaround for XFS header brokenness.
+
+* Wed Feb 03 2016 Fedora Release Engineering <releng@fedoraproject.org> - 1:9.2.0-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
+
+* Thu Jan 14 2016 Jonathan Wakely <jwakely@redhat.com> - 1:9.2.0-3
+- Rebuilt for Boost 1.60
+
+* Mon Dec 14 2015 Dan Horák <dan[at]danny.cz> - 1:9.2.0-2
+- fix build on s390(x) - gperftools/tcmalloc not available there
+
+* Tue Nov 10 2015 Boris Ranto <branto@redhat.com> - 1:9.2.0-1
+- Rebase to latest stable upstream version (9.2.0 - infernalis)
+- Use upstream spec file
+
+* Tue Oct 27 2015 Boris Ranto <branto@redhat.com> - 1:0.94.5-1
+- Rebase to latest upstream version
+
+* Tue Oct 20 2015 Boris Ranto <branto@redhat.com> - 1:0.94.4-1
+- Rebase to latest upstream version
+- The rtdsc patch got merged upstream and is already present in the release
+
+* Thu Aug 27 2015 Jonathan Wakely <jwakely@redhat.com> - 1:0.94.3-2
+- Rebuilt for Boost 1.59
+
+* Thu Aug 27 2015 Boris Ranto <branto@redhat.com> - 1:0.94.3-1
+- Rebase to latest upstream version
+- The boost patch got merged upstream and is already present in the release
+
+* Fri Jul 31 2015 Richard W.M. Jones <rjones@redhat.com> - 1:0.94.2-4
+- Fix build against boost 1.58 (http://tracker.ceph.com/issues/11576).
+
+* Wed Jul 29 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:0.94.2-3
+- Rebuilt for https://fedoraproject.org/wiki/Changes/F23Boost159
+
+* Wed Jul 22 2015 David Tardon <dtardon@redhat.com> - 1:0.94.2-2
+- rebuild for Boost 1.58
+
+* Thu Jul 16 2015 Boris Ranto <branto@redhat.com> - 1:0.94.2-1
+- Rebase to latest upstream version
+
+* Wed Jun 17 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:0.94.1-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
+
+* Mon Jun 08 2015 Dan Horák <dan[at]danny.cz> - 1:0.94.1-4
+- fix build on s390(x) - no gperftools there
+
+* Thu May 21 2015 Boris Ranto <branto@redhat.com> - 1:0.94.1-3
+- Disable lttng support (rhbz#1223319)
+
+* Mon May 18 2015 Boris Ranto <branto@redhat.com> - 1:0.94.1-2
+- Fix arm linking issue (rhbz#1222286)
+
+* Tue Apr 14 2015 Boris Ranto <branto@redhat.com> - 1:0.94.1-1
+- Rebase to latest upstream version and sync-up the spec file
+- Add arm compilation patches
+
+* Wed Apr 01 2015 Ken Dreyer <ktdreyer@ktdreyer.com> - 1:0.87.1-3
+- add version numbers to Obsoletes (RHBZ #1193182)
+
+* Wed Mar 4 2015 Boris Ranto <branto@redhat.com> - 1:0.87.1-2
+- Perform a hardened build
+- Use git-formatted patches
+- Add patch for pthreads rwlock unlock problem
+- Do not remove conf files on uninstall
+- Remove the cleanup function, it is only necessary for f20 and f21
+
+* Wed Feb 25 2015 Boris Ranto <branto@redhat.com> - 1:0.87.1-1
+- Rebase to latest upstream
+- Remove boost patch, it is in upstream tarball
+- Build with yasm, tarball contains fix for the SELinux issue
+
+* Thu Jan 29 2015 Petr Machata <pmachata@redhat.com> - 1:0.87-2
+- Rebuild for boost 1.57.0
+- Include <boost/optional/optional_io.hpp> instead of
+ <boost/optional.hpp>. Keep the old dumping behavior in
+ osd/ECBackend.cc (ceph-0.87-boost157.patch)
+
+* Mon Nov 3 2014 Boris Ranto <branto@redhat.com> - 1:0.87-1
+- Rebase to latest major version (firefly -> giant)
+
+* Thu Oct 16 2014 Boris Ranto <branto@redhat.com - 1:0.80.7-1
+- Rebase to latest upstream version
+
+* Sat Oct 11 2014 Boris Ranto <branto@redhat.com> - 1:0.80.6-3
+- Fix a typo in librados-devel vs librados2-devel dependency
+
+* Fri Oct 10 2014 Boris Ranto <branto@redhat.com> - 1:0.80.6-2
+- Provide empty file list for python-ceph-compat and ceph-devel-compat
+
+* Fri Oct 10 2014 Boris Ranto <branto@redhat.com> - 1:0.80.6-1
+- Rebase to 0.80.6
+- Split ceph-devel and python-ceph packages
+
+* Tue Sep 9 2014 Dan Horák <dan[at]danny.cz> - 1:0.80.5-10
+- update Requires for s390(x)
+
+* Wed Sep 3 2014 Boris Ranto <branto@redhat.com> - 1:0.80.5-9
+- Symlink librd.so.1 to /usr/lib64/qemu only on rhel6+ x86_64 (1136811)
+
+* Thu Aug 21 2014 Boris Ranto <branto@redhat.com> - 1:0.80.5-8
+- Revert the previous change
+- Fix bz 1118504, second attempt (yasm appears to be the package that caused this
+- Fix bogus dates
+
+* Wed Aug 20 2014 Boris Ranto <branto@redhat.com> - 1:0.80.5-7
+- Several more merges from file to try to fix the selinux issue (1118504)
+
+* Sun Aug 17 2014 Kalev Lember <kalevlember@gmail.com> - 1:0.80.5-6
+- Obsolete ceph-libcephfs
+
+* Sat Aug 16 2014 Boris Ranto <branto@redhat.com> - 1:0.80.5-5
+- Do not require xfsprogs/xfsprogs-devel for el6
+- Require gperftools-devel for non-ppc*/s390* architectures only
+- Do not require junit -- no need to build libcephfs-test.jar
+- Build without libxfs for el6
+- Build without tcmalloc for ppc*/s390* architectures
+- Location of mkcephfs must depend on a rhel release
+- Use epoch in the Requires fields [1130700]
+
+* Sat Aug 16 2014 Boris Ranto <branto@redhat.com> - 1:0.80.5-4
+- Use the proper version name in Obsoletes
+
+* Fri Aug 15 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1:0.80.5-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild
+
+* Fri Aug 15 2014 Boris Ranto <branto@redhat.com> - 1:0.80.5-2
+- Add the arm pthread hack
+
+* Fri Aug 15 2014 Boris Ranto <branto@redhat.com> - 1:0.80.5-1
+- Bump the Epoch, we need to keep the latest stable, not development, ceph version in fedora
+- Use the upstream spec file with the ceph-libs split
+- Add libs-compat subpackage [1116546]
+- use fedora in rhel 7 checks
+- obsolete libcephfs [1116614]
+- depend on redhat-lsb-core for the initscript [1108696]
+
+* Wed Aug 13 2014 Kalev Lember <kalevlember@gmail.com> - 0.81.0-6
+- Add obsoletes to keep the upgrade path working (#1118510)
+
+* Mon Jul 7 2014 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 0.81.0-5
+- revert to old spec until after f21 branch
+
+* Fri Jul 4 2014 Kaleb S. KEITHLEY <kkeithle[at]redhat.com>
+- temporary exclude f21/armv7hl. N.B. it builds fine on f20/armv7hl.
+
+* Fri Jul 4 2014 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 0.81.0-4
+- upstream ceph.spec file
+
+* Tue Jul 1 2014 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 0.81.0-3
+- upstream ceph.spec file
+
+* Sat Jun 07 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.81.0-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
+
+* Thu Jun 5 2014 Kaleb S. KEITHLEY <kkeithle[at]redhat.com>
+- el6 ppc64 likewise for tcmalloc, merge from origin/el6
+
+* Thu Jun 5 2014 Kaleb S. KEITHLEY <kkeithle[at]redhat.com>
+- el6 ppc64 does not have gperftools, merge from origin/el6
+
+* Thu Jun 5 2014 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 0.81.0-1
+- ceph-0.81.0
+
+* Wed Jun 4 2014 Peter Robinson <pbrobinson@fedoraproject.org> 0.80.1-5
+- gperftools now available on aarch64/ppc64
+
+* Fri May 23 2014 Petr Machata <pmachata@redhat.com> - 0.80.1-4
+- Rebuild for boost 1.55.0
+
+* Fri May 23 2014 David Tardon <dtardon@redhat.com> - 0.80.1-3
+- rebuild for boost 1.55.0
+
+* Wed May 14 2014 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 0.80.1-2
+- build epel-6
+- exclude %%{_libdir}/ceph/erasure-code in base package
+
+* Tue May 13 2014 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 0.80.1-1
+- Update to latest stable upstream release, BZ 1095201
+- PIE, _hardened_build, BZ 955174
+
+* Thu Feb 06 2014 Ken Dreyer <ken.dreyer@inktank.com> - 0.72.2-2
+- Move plugins from -devel into -libs package (#891993). Thanks Michael
+ Schwendt.
+
+* Mon Jan 06 2014 Ken Dreyer <ken.dreyer@inktank.com> 0.72.2-1
+- Update to latest stable upstream release
+- Use HTTPS for URLs
+- Submit Automake 1.12 patch upstream
+- Move unversioned shared libs from ceph-libs into ceph-devel
+
+* Wed Dec 18 2013 Marcin Juszkiewicz <mjuszkiewicz@redhat.com> 0.67.3-4
+- build without tcmalloc on aarch64 (no gperftools)
+
+* Sat Nov 30 2013 Peter Robinson <pbrobinson@fedoraproject.org> 0.67.3-3
+- gperftools not currently available on aarch64
+
+* Mon Oct 07 2013 Dan Horák <dan[at]danny.cz> - 0.67.3-2
+- fix build on non-x86_64 64-bit arches
+
+* Wed Sep 11 2013 Josef Bacik <josef@toxicpanda.com> - 0.67.3-1
+- update to 0.67.3
+
+* Wed Sep 11 2013 Michael Schwendt <mschwendt@fedoraproject.org> - 0.61.7-3
+- let base package include all its documentation files via %%doc magic,
+ so for Fedora 20 Unversioned Docdirs no files are included accidentally
+- include the sample config files again (instead of just an empty docdir
+ that has been added for #846735)
+- don't include librbd.so.1 also in -devel package (#1003202)
+- move one misplaced rados plugin from -devel into -libs package (#891993)
+- include missing directories in -devel and -libs packages
+- move librados-config into the -devel pkg where its manual page is, too
+- add %%_isa to subpackage dependencies
+- don't use %%defattr anymore
+- add V=1 to make invocation for verbose build output
+
+* Wed Jul 31 2013 Peter Robinson <pbrobinson@fedoraproject.org> 0.61.7-2
+- re-enable tmalloc on arm now gperftools is fixed
+
+* Mon Jul 29 2013 Josef Bacik <josef@toxicpanda.com> - 0.61.7-1
+- Update to 0.61.7
+
+* Sat Jul 27 2013 pmachata@redhat.com - 0.56.4-2
+- Rebuild for boost 1.54.0
+
+* Fri Mar 29 2013 Josef Bacik <josef@toxicpanda.com> - 0.56.4-1
+- Update to 0.56.4
+- Add upstream d02340d90c9d30d44c962bea7171db3fe3bfba8e to fix logrotate
+
+* Wed Feb 20 2013 Josef Bacik <josef@toxicpanda.com> - 0.56.3-1
+- Update to 0.56.3
+
+* Mon Feb 11 2013 Richard W.M. Jones <rjones@redhat.com> - 0.53-2
+- Rebuilt to try to fix boost dependency problem in Rawhide.
+
+* Thu Nov 1 2012 Josef Bacik <josef@toxicpanda.com> - 0.53-1
+- Update to 0.53
+
+* Mon Sep 24 2012 Jonathan Dieter <jdieter@lesbg.com> - 0.51-3
+- Fix automake 1.12 error
+- Rebuild after buildroot was messed up
+
+* Tue Sep 18 2012 Jonathan Dieter <jdieter@lesbg.com> - 0.51-2
+- Use system leveldb
+
+* Fri Sep 07 2012 David Nalley <david@gnsa.us> - 0.51-1
+- Updating to 0.51
+- Updated url and source url.
+
+* Wed Jul 18 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.46-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
+
+* Wed May 9 2012 Josef Bacik <josef@toxicpanda.com> - 0.46-1
+- updated to upstream 0.46
+- broke out libcephfs (rhbz# 812975)
+
+* Mon Apr 23 2012 Dan Horák <dan[at]danny.cz> - 0.45-2
+- fix detection of C++11 atomic header
+
+* Thu Apr 12 2012 Josef Bacik <josef@toxicpanda.com> - 0.45-1
+- updating to upstream 0.45
+
+* Wed Apr 4 2012 Niels de Vos <devos@fedoraproject.org> - 0.44-5
+- Add LDFLAGS=-lpthread on any ARM architecture
+- Add CFLAGS=-DAO_USE_PTHREAD_DEFS on ARMv5tel
+
+* Mon Mar 26 2012 Dan Horák <dan[at]danny.cz> 0.44-4
+- gperftools not available also on ppc
+
+* Mon Mar 26 2012 Jonathan Dieter <jdieter@lesbg.com> - 0.44-3
+- Remove unneeded patch
+
+* Sun Mar 25 2012 Jonathan Dieter <jdieter@lesbg.com> - 0.44-2
+- Update to 0.44
+- Fix build problems
+
+* Mon Mar 5 2012 Jonathan Dieter <jdieter@lesbg.com> - 0.43-1
+- Update to 0.43
+- Remove upstreamed compile fixes patch
+- Remove obsoleted dump_pop patch
+
+* Tue Feb 28 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.41-2
+- Rebuilt for c++ ABI breakage
+
+* Thu Feb 16 2012 Tom Callaway <spot@fedoraproject.org> 0.41-1
+- update to 0.41
+- fix issues preventing build
+- rebuild against gperftools
+
+* Sat Dec 03 2011 David Nalley <david@gnsa.us> 0.38-1
+- updating to upstream 0.39
+
+* Sat Nov 05 2011 David Nalley <david@gnsa.us> 0.37-1
+- create /etc/ceph - bug 745462
+- upgrading to 0.37, fixing 745460, 691033
+- fixing various logrotate bugs 748930, 747101
+
+* Fri Aug 19 2011 Dan Horák <dan[at]danny.cz> 0.31-4
+- google-perftools not available also on s390(x)
+
+* Mon Jul 25 2011 Karsten Hopp <karsten@redhat.com> 0.31-3
+- build without tcmalloc on ppc64, BR google-perftools is not available there
+
+* Tue Jul 12 2011 Josef Bacik <josef@toxicpanda.com> 0.31-2
+- Remove curl/types.h include since we don't use it anymore
+
+* Tue Jul 12 2011 Josef Bacik <josef@toxicpanda.com> 0.31-1
+- Update to 0.31
+
+* Tue Apr 5 2011 Josef Bacik <josef@toxicpanda.com> 0.26-2
+- Add the compile fix patch
+
+* Tue Apr 5 2011 Josef Bacik <josef@toxicpanda.com> 0.26
+- Update to 0.26
+
+* Tue Mar 22 2011 Josef Bacik <josef@toxicpanda.com> 0.25.1-1
+- Update to 0.25.1
+
+* Tue Feb 08 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.21.3-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
+
+* Wed Sep 29 2010 Steven Pritchard <steve@kspei.com> 0.21.3-1
+- Update to 0.21.3.
+
+* Mon Aug 30 2010 Steven Pritchard <steve@kspei.com> 0.21.2-1
+- Update to 0.21.2.
+
+* Thu Aug 26 2010 Steven Pritchard <steve@kspei.com> 0.21.1-1
+- Update to 0.21.1.
+- Sample configs moved to /usr/share/doc/ceph/.
+- Added cclass, rbd, and cclsinfo.
+- Dropped mkmonfs and rbdtool.
+- mkcephfs moved to /sbin.
+- Add libcls_rbd.so.
+
+* Tue Jul 6 2010 Josef Bacik <josef@toxicpanda.com> 0.20.2-1
+- update to 0.20.2
+
+* Wed May 5 2010 Josef Bacik <josef@toxicpanda.com> 0.20-1
+- update to 0.20
+- disable hadoop building
+- remove all the test binaries properly
+
+* Fri Apr 30 2010 Sage Weil <sage@newdream.net> 0.19.1-5
+- Remove java deps (no need to build hadoop by default)
+- Include all required librados helpers
+- Include fetch_config sample
+- Include rbdtool
+- Remove misc debugging, test binaries
+
+* Fri Apr 30 2010 Josef Bacik <josef@toxicpanda.com> 0.19.1-4
+- Add java-devel and java tricks to get hadoop to build
+
+* Mon Apr 26 2010 Josef Bacik <josef@toxicpanda.com> 0.19.1-3
+- Move the rados and cauthtool man pages into the base package
+
+* Sun Apr 25 2010 Jonathan Dieter <jdieter@lesbg.com> 0.19.1-2
+- Add missing libhadoopcephfs.so* to file list
+- Add COPYING to all subpackages
+- Fix ownership of /usr/lib[64]/ceph
+- Enhance description of fuse client
+
+* Tue Apr 20 2010 Josef Bacik <josef@toxicpanda.com> 0.19.1-1
+- Update to 0.19.1
+
+* Mon Feb 8 2010 Josef Bacik <josef@toxicpanda.com> 0.18-1
+- Initial spec file creation, based on the template provided in the ceph src