From 8239ecf0b4b8bbe5b3c17964d230d13cee4d900a Mon Sep 17 00:00:00 2001

From: Frantisek Sumsal <frantisek@sumsal.cz>

Date: Mon, 5 Aug 2019 14:38:45 +0200

Subject: [PATCH 339/341] test: add a simple sanity check for systems without

 NUMA support

(cherry picked from commit 92f8e978923f962a57d744c5f358520ac06f7892)

Related: #1808940

---

 test/TEST-36-NUMAPOLICY/testsuite.sh | 350 ++++++++++++++-------------

 1 file changed, 180 insertions(+), 170 deletions(-)

diff --git a/test/TEST-36-NUMAPOLICY/testsuite.sh b/test/TEST-36-NUMAPOLICY/testsuite.sh

index 1c8cf7e6b6..a5ac788178 100755

--- a/test/TEST-36-NUMAPOLICY/testsuite.sh

+++ b/test/TEST-36-NUMAPOLICY/testsuite.sh

@@ -50,11 +50,12 @@ startJournalctl() {

 }

 stopJournalctl() {

+    local unit="${1:-init.scope}"

     # Using journalctl --sync should be better than using SIGRTMIN+1, as

     # the --sync wait until the synchronization is complete

     echo "Force journald to write all queued messages"

     journalctl --sync

-    journalctl -u init.scope --cursor-file="$journalCursorFile" > "$journalLog"

+    journalctl -u $unit --cursor-file="$journalCursorFile" > "$journalLog"

 }

 checkNUMA() {

@@ -125,181 +126,190 @@ systemctlCheckNUMAProperties() {

     fi

 }

-if ! checkNUMA; then

-    echo >&2 "NUMA is not supported on this machine, skipping the test"

-

-    # FIXME: add some sanity checks to verify systemd behaves correctly with

-    #        NUMA disabled together with NUMAPolicy= and NUMAMask=

-

-    systemd-analyze log-level info

-    echo OK > /testok

-

-    exit 0

-fi

-

 writeTestUnit

 # Create systemd config drop-in directory

 confDir="/etc/systemd/system.conf.d/"

 mkdir -p "$confDir"

-echo "PID1 NUMAPolicy support - Default policy w/o mask"

-writePID1NUMAPolicy "default"

-pid1ReloadWithStrace

-# Kernel requires that nodemask argument is set to NULL when setting default policy

-grep "set_mempolicy(MPOL_DEFAULT, NULL" $straceLog

-

-echo "PID1 NUMAPolicy support - Default policy w/ mask"

-writePID1NUMAPolicy "default" "0"

-pid1ReloadWithStrace

-grep "set_mempolicy(MPOL_DEFAULT, NULL" $straceLog

-

-echo "PID1 NUMAPolicy support - Bind policy w/o mask"

-writePID1NUMAPolicy "bind"

-pid1ReloadWithJournal

-grep "Failed to set NUMA memory policy: Invalid argument" $journalLog

-

-echo "PID1 NUMAPolicy support - Bind policy w/ mask"

-writePID1NUMAPolicy "bind" "0"

-pid1ReloadWithStrace

-grep -P "set_mempolicy\(MPOL_BIND, \[0x0*1\]" $straceLog

-

-echo "PID1 NUMAPolicy support - Interleave policy w/o mask"

-writePID1NUMAPolicy "interleave"

-pid1ReloadWithJournal

-grep "Failed to set NUMA memory policy: Invalid argument" $journalLog

-

-echo "PID1 NUMAPolicy support - Interleave policy w/ mask"

-writePID1NUMAPolicy "interleave" "0"

-pid1ReloadWithStrace

-grep -P "set_mempolicy\(MPOL_INTERLEAVE, \[0x0*1\]" $straceLog

-

-echo "PID1 NUMAPolicy support - Preferred policy w/o mask"

-writePID1NUMAPolicy "preferred"

-pid1ReloadWithJournal

-# Preferred policy with empty node mask is actually allowed and should reset allocation policy to default

-! grep "Failed to set NUMA memory policy: Invalid argument" $journalLog

-

-echo "PID1 NUMAPolicy support - Preferred policy w/ mask"

-writePID1NUMAPolicy "preferred" "0"

-pid1ReloadWithStrace

-grep -P "set_mempolicy\(MPOL_PREFERRED, \[0x0*1\]" $straceLog

-

-echo "PID1 NUMAPolicy support - Local policy w/o mask"

-writePID1NUMAPolicy "local"

-pid1ReloadWithStrace

-# Kernel requires that nodemask argument is set to NULL when setting default policy

-# The unpatched versions of strace don't recognize the MPOL_LOCAL constant and

-# return a numerical constant instead (with a comment):

-#   set_mempolicy(0x4 /* MPOL_??? */, NULL, 0) = 0

-# Let's cover this scenario as well

-grep -E "set_mempolicy\((MPOL_LOCAL|0x4 [^,]*), NULL" $straceLog

-

-echo "PID1 NUMAPolicy support - Local policy w/ mask"

-writePID1NUMAPolicy "local" "0"

-pid1ReloadWithStrace

-grep -E "set_mempolicy\((MPOL_LOCAL|0x4 [^,]*), NULL" $straceLog

-

-echo "Unit file NUMAPolicy support - Default policy w/o mask"

-writeTestUnitNUMAPolicy "default"

-pid1StartUnitWithStrace $testUnit

-systemctlCheckNUMAProperties $testUnit "default"

-pid1StopUnit $testUnit

-grep "set_mempolicy(MPOL_DEFAULT, NULL" $straceLog

-

-echo "Unit file NUMAPolicy support - Default policy w/ mask"

-writeTestUnitNUMAPolicy "default" "0"

-pid1StartUnitWithStrace $testUnit

-systemctlCheckNUMAProperties $testUnit "default" "0"

-pid1StopUnit $testUnit

-# Maks must be ignored

-grep "set_mempolicy(MPOL_DEFAULT, NULL" $straceLog

-

-echo "Unit file NUMAPolicy support - Bind policy w/o mask"

-writeTestUnitNUMAPolicy "bind"

-pid1StartUnitWithJournal $testUnit

-pid1StopUnit $testUnit

-grep "numa-test.service: Main process exited, code=exited, status=242/NUMA" $journalLog

-

-echo "Unit file NUMAPolicy support - Bind policy w/ mask"

-writeTestUnitNUMAPolicy "bind" "0"

-pid1StartUnitWithStrace $testUnit

-systemctlCheckNUMAProperties $testUnit "bind" "0"

-pid1StopUnit $testUnit

-grep -P "set_mempolicy\(MPOL_BIND, \[0x0*1\]" $straceLog

-

-echo "Unit file NUMAPolicy support - Interleave policy w/o mask"

-writeTestUnitNUMAPolicy "interleave"

-pid1StartUnitWithStrace $testUnit

-pid1StopUnit $testUnit

-grep "numa-test.service: Main process exited, code=exited, status=242/NUMA" $journalLog

-

-echo "Unit file NUMAPolicy support - Interleave policy w/ mask"

-writeTestUnitNUMAPolicy "interleave" "0"

-pid1StartUnitWithStrace $testUnit

-systemctlCheckNUMAProperties $testUnit "interleave" "0"

-pid1StopUnit $testUnit

-grep -P "set_mempolicy\(MPOL_INTERLEAVE, \[0x0*1\]" $straceLog

-

-echo "Unit file NUMAPolicy support - Preferred policy w/o mask"

-writeTestUnitNUMAPolicy "preferred"

-pid1StartUnitWithJournal $testUnit

-systemctlCheckNUMAProperties $testUnit "preferred"

-pid1StopUnit $testUnit

-! grep "numa-test.service: Main process exited, code=exited, status=242/NUMA" $journalLog

-

-echo "Unit file NUMAPolicy support - Preferred policy w/ mask"

-writeTestUnitNUMAPolicy "preferred" "0"

-pid1StartUnitWithStrace $testUnit

-systemctlCheckNUMAProperties $testUnit "preferred" "0"

-pid1StopUnit $testUnit

-grep -P "set_mempolicy\(MPOL_PREFERRED, \[0x0*1\]" $straceLog

-

-echo "Unit file NUMAPolicy support - Local policy w/o mask"

-writeTestUnitNUMAPolicy "local"

-pid1StartUnitWithStrace $testUnit

-systemctlCheckNUMAProperties $testUnit "local"

-pid1StopUnit $testUnit

-grep -E "set_mempolicy\((MPOL_LOCAL|0x4 [^,]*), NULL" $straceLog

-

-echo "Unit file NUMAPolicy support - Local policy w/ mask"

-writeTestUnitNUMAPolicy "local" "0"

-pid1StartUnitWithStrace $testUnit

-systemctlCheckNUMAProperties $testUnit "local" "0"

-pid1StopUnit $testUnit

-# Maks must be ignored

-grep -E "set_mempolicy\((MPOL_LOCAL|0x4 [^,]*), NULL" $straceLog

-

-echo "systemd-run NUMAPolicy support"

-runUnit='numa-systemd-run-test.service'

-

-systemd-run -p NUMAPolicy=default --unit $runUnit sleep 1000

-systemctlCheckNUMAProperties $runUnit "default"

-pid1StopUnit $runUnit

-

-systemd-run -p NUMAPolicy=default -p NUMAMask=0 --unit $runUnit sleep 1000

-systemctlCheckNUMAProperties $runUnit "default" ""

-pid1StopUnit $runUnit

-

-systemd-run -p NUMAPolicy=bind -p NUMAMask=0 --unit $runUnit sleep 1000

-systemctlCheckNUMAProperties $runUnit "bind" "0"

-pid1StopUnit $runUnit

-

-systemd-run -p NUMAPolicy=interleave -p NUMAMask=0 --unit $runUnit sleep 1000

-systemctlCheckNUMAProperties $runUnit "interleave" "0"

-pid1StopUnit $runUnit

-

-systemd-run -p NUMAPolicy=preferred -p NUMAMask=0 --unit $runUnit sleep 1000

-systemctlCheckNUMAProperties $runUnit "preferred" "0"

-pid1StopUnit $runUnit

-

-systemd-run -p NUMAPolicy=local --unit $runUnit sleep 1000

-systemctlCheckNUMAProperties $runUnit "local"

-pid1StopUnit $runUnit

-

-systemd-run -p NUMAPolicy=local -p NUMAMask=0 --unit $runUnit sleep 1000

-systemctlCheckNUMAProperties $runUnit "local" ""

-pid1StopUnit $runUnit

+if ! checkNUMA; then

+    echo >&2 "NUMA is not supported on this machine, switching to a simple sanity check"

+

+    echo "PID1 NUMAPolicy=default && NUMAMask=0 check without NUMA support"

+    writePID1NUMAPolicy "default" "0"

+    startJournalctl

+    systemctl daemon-reload

+    stopJournalctl

+    grep "NUMA support not available, ignoring" "$journalLog"

+

+    echo "systemd-run NUMAPolicy=default && NUMAMask=0 check without NUMA support"

+    runUnit='numa-systemd-run-test.service'

+    startJournalctl

+    systemd-run -p NUMAPolicy=default -p NUMAMask=0 --unit $runUnit sleep 1000

+    sleep $sleepAfterStart

+    pid1StopUnit $runUnit

+    stopJournalctl $runUnit

+    grep "NUMA support not available, ignoring" "$journalLog"

+

+else

+    echo "PID1 NUMAPolicy support - Default policy w/o mask"

+    writePID1NUMAPolicy "default"

+    pid1ReloadWithStrace

+    # Kernel requires that nodemask argument is set to NULL when setting default policy

+    grep "set_mempolicy(MPOL_DEFAULT, NULL" $straceLog

+

+    echo "PID1 NUMAPolicy support - Default policy w/ mask"

+    writePID1NUMAPolicy "default" "0"

+    pid1ReloadWithStrace

+    grep "set_mempolicy(MPOL_DEFAULT, NULL" $straceLog

+

+    echo "PID1 NUMAPolicy support - Bind policy w/o mask"

+    writePID1NUMAPolicy "bind"

+    pid1ReloadWithJournal

+    grep "Failed to set NUMA memory policy: Invalid argument" $journalLog

+

+    echo "PID1 NUMAPolicy support - Bind policy w/ mask"

+    writePID1NUMAPolicy "bind" "0"

+    pid1ReloadWithStrace

+    grep -P "set_mempolicy\(MPOL_BIND, \[0x0*1\]" $straceLog

+

+    echo "PID1 NUMAPolicy support - Interleave policy w/o mask"

+    writePID1NUMAPolicy "interleave"

+    pid1ReloadWithJournal

+    grep "Failed to set NUMA memory policy: Invalid argument" $journalLog

+

+    echo "PID1 NUMAPolicy support - Interleave policy w/ mask"

+    writePID1NUMAPolicy "interleave" "0"

+    pid1ReloadWithStrace

+    grep -P "set_mempolicy\(MPOL_INTERLEAVE, \[0x0*1\]" $straceLog

+

+    echo "PID1 NUMAPolicy support - Preferred policy w/o mask"

+    writePID1NUMAPolicy "preferred"

+    pid1ReloadWithJournal

+    # Preferred policy with empty node mask is actually allowed and should reset allocation policy to default

+    ! grep "Failed to set NUMA memory policy: Invalid argument" $journalLog

+

+    echo "PID1 NUMAPolicy support - Preferred policy w/ mask"

+    writePID1NUMAPolicy "preferred" "0"

+    pid1ReloadWithStrace

+    grep -P "set_mempolicy\(MPOL_PREFERRED, \[0x0*1\]" $straceLog

+

+    echo "PID1 NUMAPolicy support - Local policy w/o mask"

+    writePID1NUMAPolicy "local"

+    pid1ReloadWithStrace

+    # Kernel requires that nodemask argument is set to NULL when setting default policy

+    # The unpatched versions of strace don't recognize the MPOL_LOCAL constant and

+    # return a numerical constant instead (with a comment):

+    #   set_mempolicy(0x4 /* MPOL_??? */, NULL, 0) = 0

+    # Let's cover this scenario as well

+    grep -E "set_mempolicy\((MPOL_LOCAL|0x4 [^,]*), NULL" $straceLog

+

+    echo "PID1 NUMAPolicy support - Local policy w/ mask"

+    writePID1NUMAPolicy "local" "0"

+    pid1ReloadWithStrace

+    grep -E "set_mempolicy\((MPOL_LOCAL|0x4 [^,]*), NULL" $straceLog

+

+    echo "Unit file NUMAPolicy support - Default policy w/o mask"

+    writeTestUnitNUMAPolicy "default"

+    pid1StartUnitWithStrace $testUnit

+    systemctlCheckNUMAProperties $testUnit "default"

+    pid1StopUnit $testUnit

+    grep "set_mempolicy(MPOL_DEFAULT, NULL" $straceLog

+

+    echo "Unit file NUMAPolicy support - Default policy w/ mask"

+    writeTestUnitNUMAPolicy "default" "0"

+    pid1StartUnitWithStrace $testUnit

+    systemctlCheckNUMAProperties $testUnit "default" "0"

+    pid1StopUnit $testUnit

+    # Maks must be ignored

+    grep "set_mempolicy(MPOL_DEFAULT, NULL" $straceLog

+

+    echo "Unit file NUMAPolicy support - Bind policy w/o mask"

+    writeTestUnitNUMAPolicy "bind"

+    pid1StartUnitWithJournal $testUnit

+    pid1StopUnit $testUnit

+    grep "numa-test.service: Main process exited, code=exited, status=242/NUMA" $journalLog

+

+    echo "Unit file NUMAPolicy support - Bind policy w/ mask"

+    writeTestUnitNUMAPolicy "bind" "0"

+    pid1StartUnitWithStrace $testUnit

+    systemctlCheckNUMAProperties $testUnit "bind" "0"

+    pid1StopUnit $testUnit

+    grep -P "set_mempolicy\(MPOL_BIND, \[0x0*1\]" $straceLog

+

+    echo "Unit file NUMAPolicy support - Interleave policy w/o mask"

+    writeTestUnitNUMAPolicy "interleave"

+    pid1StartUnitWithStrace $testUnit

+    pid1StopUnit $testUnit

+    grep "numa-test.service: Main process exited, code=exited, status=242/NUMA" $journalLog

+

+    echo "Unit file NUMAPolicy support - Interleave policy w/ mask"

+    writeTestUnitNUMAPolicy "interleave" "0"

+    pid1StartUnitWithStrace $testUnit

+    systemctlCheckNUMAProperties $testUnit "interleave" "0"

+    pid1StopUnit $testUnit

+    grep -P "set_mempolicy\(MPOL_INTERLEAVE, \[0x0*1\]" $straceLog

+

+    echo "Unit file NUMAPolicy support - Preferred policy w/o mask"

+    writeTestUnitNUMAPolicy "preferred"

+    pid1StartUnitWithJournal $testUnit

+    systemctlCheckNUMAProperties $testUnit "preferred"

+    pid1StopUnit $testUnit

+    ! grep "numa-test.service: Main process exited, code=exited, status=242/NUMA" $journalLog

+

+    echo "Unit file NUMAPolicy support - Preferred policy w/ mask"

+    writeTestUnitNUMAPolicy "preferred" "0"

+    pid1StartUnitWithStrace $testUnit

+    systemctlCheckNUMAProperties $testUnit "preferred" "0"

+    pid1StopUnit $testUnit

+    grep -P "set_mempolicy\(MPOL_PREFERRED, \[0x0*1\]" $straceLog

+

+    echo "Unit file NUMAPolicy support - Local policy w/o mask"

+    writeTestUnitNUMAPolicy "local"

+    pid1StartUnitWithStrace $testUnit

+    systemctlCheckNUMAProperties $testUnit "local"

+    pid1StopUnit $testUnit

+    grep -E "set_mempolicy\((MPOL_LOCAL|0x4 [^,]*), NULL" $straceLog

+

+    echo "Unit file NUMAPolicy support - Local policy w/ mask"

+    writeTestUnitNUMAPolicy "local" "0"

+    pid1StartUnitWithStrace $testUnit

+    systemctlCheckNUMAProperties $testUnit "local" "0"

+    pid1StopUnit $testUnit

+    # Maks must be ignored

+    grep -E "set_mempolicy\((MPOL_LOCAL|0x4 [^,]*), NULL" $straceLog

+

+    echo "systemd-run NUMAPolicy support"

+    runUnit='numa-systemd-run-test.service'

+

+    systemd-run -p NUMAPolicy=default --unit $runUnit sleep 1000

+    systemctlCheckNUMAProperties $runUnit "default"

+    pid1StopUnit $runUnit

+

+    systemd-run -p NUMAPolicy=default -p NUMAMask=0 --unit $runUnit sleep 1000

+    systemctlCheckNUMAProperties $runUnit "default" ""

+    pid1StopUnit $runUnit

+

+    systemd-run -p NUMAPolicy=bind -p NUMAMask=0 --unit $runUnit sleep 1000

+    systemctlCheckNUMAProperties $runUnit "bind" "0"

+    pid1StopUnit $runUnit

+

+    systemd-run -p NUMAPolicy=interleave -p NUMAMask=0 --unit $runUnit sleep 1000

+    systemctlCheckNUMAProperties $runUnit "interleave" "0"

+    pid1StopUnit $runUnit

+

+    systemd-run -p NUMAPolicy=preferred -p NUMAMask=0 --unit $runUnit sleep 1000

+    systemctlCheckNUMAProperties $runUnit "preferred" "0"

+    pid1StopUnit $runUnit

+

+    systemd-run -p NUMAPolicy=local --unit $runUnit sleep 1000

+    systemctlCheckNUMAProperties $runUnit "local"

+    pid1StopUnit $runUnit

+

+    systemd-run -p NUMAPolicy=local -p NUMAMask=0 --unit $runUnit sleep 1000

+    systemctlCheckNUMAProperties $runUnit "local" ""

+    pid1StopUnit $runUnit

+fi

 # Cleanup

 rm -rf $testDir

-- 

2.21.1