From 2555618f32772df00f3ceb4a780d6c13f7b3d93c Mon Sep 17 00:00:00 2001

From: "Richard W.M. Jones" <rjones@redhat.com>

Date: Mon, 29 Jul 2013 14:47:56 +0100

Subject: [PATCH] RHEL 8: Disable unsupported remote drive protocols

 (RHBZ#962113).

This disables support for unsupported remote drive protocols:

 * ftp

 * ftps

 * http

 * https

 * tftp

 * gluster

 * iscsi

 * sheepdog

 * ssh

Note 'nbd' is not disabled, and of course 'file' works.

We hope to gradually add some of these back over the lifetime of RHEL 8.

---

 docs/guestfs-testing.pod               |  20 -----

 fish/guestfish.pod                     |  66 ++--------------

 fish/test-add-uri.sh                   |  32 --------

 generator/actions_core.ml              |  50 +------------

 lib/drives.c                           |   8 ++

 lib/guestfs.pod                        | 100 -------------------------

 tests/disks/test-qemu-drive-libvirt.sh |  28 -------

 tests/disks/test-qemu-drive.sh         |  60 ---------------

 8 files changed, 16 insertions(+), 348 deletions(-)

diff --git a/docs/guestfs-testing.pod b/docs/guestfs-testing.pod

index f558964bf..8f264ed17 100644

--- a/docs/guestfs-testing.pod

+++ b/docs/guestfs-testing.pod

@@ -109,26 +109,6 @@ image.  To exit, type C<exit>.

 If you get an error, try enabling debugging (add C<-v> to the command

 line).  Also make sure that L<libguestfs-test-tool(1)> succeeds.

-=head2 Try to open a remote guest image with guestfish.

-

-You may also have to disable libvirt by setting this:

-

- export LIBGUESTFS_BACKEND=direct

-

-If you have a disk image available over HTTP/FTP, try to open it.

-

- guestfish --ro -i --format=raw -a http://www.example.com/disk.img

-

-For SSH you will need to make sure that ssh-agent is set up so you

-don't need a password to log in to the remote machine.  Then a command

-similar to this should work:

-

- guestfish --ro -i --format=raw \

-   -a ssh://remote.example.com/path/to/disk.img

-

-If you get an error, try enabling debugging (add C<-v> to the command

-line).  Also make sure that L<libguestfs-test-tool(1)> succeeds.

-

 =head2 Run virt-alignment-scan on all your guests.

 Run L<virt-alignment-scan(1)> on guests or disk images:

diff --git a/fish/guestfish.pod b/fish/guestfish.pod

index bbf43aad5..f4762f929 100644

--- a/fish/guestfish.pod

+++ b/fish/guestfish.pod

@@ -131,9 +131,9 @@ To list what is available do:

 =head2 Remote drives

-Access a remote disk using ssh:

+Access a remote disk using NBD:

- guestfish -a ssh://example.com/path/to/disk.img

+ guestfish -a nbd://example.com

 =head2 Remote control

@@ -1127,12 +1127,12 @@ L<guestfs(3)/REMOTE STORAGE>>.

 On the command line, you can use the I<-a> option to add network

 block devices using a URI-style format, for example:

- guestfish -a ssh://root@example.com/disk.img

+ guestfish -a nbd://example.com

 URIs I<cannot> be used with the L</add> command.  The equivalent

 command using the API directly is:

- ><fs> add /disk.img protocol:ssh server:tcp:example.com username:root

+ ><fs> add /disk.img protocol:nbd server:tcp:example.com

 The possible I<-a URI> formats are described below.

@@ -1142,40 +1142,6 @@ The possible I<-a URI> formats are described below.

 Add the local disk image (or device) called F<disk.img>.

-=head2 B<-a ftp://[user@]example.com[:port]/disk.img>

-

-=head2 B<-a ftps://[user@]example.com[:port]/disk.img>

-

-=head2 B<-a http://[user@]example.com[:port]/disk.img>

-

-=head2 B<-a https://[user@]example.com[:port]/disk.img>

-

-=head2 B<-a tftp://[user@]example.com[:port]/disk.img>

-

-Add a disk located on a remote FTP, HTTP or TFTP server.

-

-The equivalent API command would be:

-

- ><fs> add /disk.img protocol:(ftp|...) server:tcp:example.com

-

-=head2 B<-a gluster://example.com[:port]/volname/image>

-

-Add a disk image located on GlusterFS storage.

-

-The server is the one running C<glusterd>, and may be C<localhost>.

-

-The equivalent API command would be:

-

- ><fs> add volname/image protocol:gluster server:tcp:example.com

-

-=head2 B<-a iscsi://example.com[:port]/target-iqn-name[/lun]>

-

-Add a disk located on an iSCSI server.

-

-The equivalent API command would be:

-

- ><fs> add target-iqn-name/lun protocol:iscsi server:tcp:example.com

-

 =head2 B<-a nbd://example.com[:port]>

 =head2 B<-a nbd://example.com[:port]/exportname>

@@ -1210,35 +1176,13 @@ The equivalent API command would be:

  ><fs> add pool/disk protocol:rbd server:tcp:example.com:port

-=head2 B<-a sheepdog://[example.com[:port]]/volume/image>

-

-Add a disk image located on a Sheepdog volume.

-

-The server name is optional.  Although libguestfs and Sheepdog

-supports multiple servers, only at most one server can be specified

-when using this URI syntax.

-

-The equivalent API command would be:

-

- ><fs> add volume protocol:sheepdog [server:tcp:example.com]

-

-=head2 B<-a ssh://[user@]example.com[:port]/disk.img>

-

-Add a disk image located on a remote server, accessed using the Secure

-Shell (ssh) SFTP protocol.  SFTP is supported out of the box by all

-major SSH servers.

-

-The equivalent API command would be:

-

- ><fs> add /disk protocol:ssh server:tcp:example.com [username:user]

-

 Note that the URIs follow the syntax of

 L<RFC 3986|https://tools.ietf.org/html/rfc3986>: in particular, there

 are restrictions on the allowed characters for the various components

 of the URI.  Characters such as C<:>, C<@>, and C B<must> be

 percent-encoded:

- $ guestfish -a ssh://user:pass%40word@example.com/disk.img

+ $ guestfish -a rbd://user:pass%40word@example.com[:port]/pool/disk

 In this case, the password is C<pass@word>.

diff --git a/fish/test-add-uri.sh b/fish/test-add-uri.sh

index 756df997b..8f84fd31b 100755

--- a/fish/test-add-uri.sh

+++ b/fish/test-add-uri.sh

@@ -40,14 +40,6 @@ function fail ()

 $VG guestfish -x -a file://$abs_builddir/test-add-uri.img </dev/null >test-add-uri.out 2>&1

 grep -sq 'add_drive ".*/test-add-uri.img"' test-add-uri.out || fail

-# curl

-$VG guestfish -x -a ftp://user@example.com/disk.img </dev/null >test-add-uri.out 2>&1

-grep -sq 'add_drive "/disk.img" "protocol:ftp" "server:tcp:example.com" "username:user"' test-add-uri.out || fail

-

-# gluster

-$VG guestfish -x -a gluster://example.com/disk </dev/null >test-add-uri.out 2>&1

-grep -sq 'add_drive "disk" "protocol:gluster" "server:tcp:example.com"' test-add-uri.out || fail

-

 # NBD

 $VG guestfish -x -a nbd://example.com </dev/null >test-add-uri.out 2>&1

 grep -sq 'add_drive "" "protocol:nbd" "server:tcp:example.com"' test-add-uri.out || fail

@@ -67,29 +59,5 @@ grep -sq 'add_drive "pool/disk" "protocol:rbd" "server:tcp:example.com:6789"' te

 $VG guestfish -x -a rbd:///pool/disk </dev/null >test-add-uri.out 2>&1

 grep -sq 'add_drive "pool/disk" "protocol:rbd"' test-add-uri.out || fail

-# sheepdog

-$VG guestfish -x -a sheepdog:///volume/image </dev/null >test-add-uri.out 2>&1

-grep -sq 'add_drive "volume/image" "protocol:sheepdog"' test-add-uri.out || fail

-

-$VG guestfish -x -a sheepdog://example.com:3000/volume/image </dev/null >test-add-uri.out 2>&1

-grep -sq 'add_drive "volume/image" "protocol:sheepdog" "server:tcp:example.com:3000"' test-add-uri.out || fail

-

-# ssh

-$VG guestfish -x -a ssh://example.com/disk.img </dev/null >test-add-uri.out 2>&1

-grep -sq 'add_drive "/disk.img" "protocol:ssh" "server:tcp:example.com"' test-add-uri.out || fail

-

-$VG guestfish -x -a ssh://user@example.com/disk.img </dev/null >test-add-uri.out 2>&1

-grep -sq 'add_drive "/disk.img" "protocol:ssh" "server:tcp:example.com" "username:user"' test-add-uri.out || fail

-

-$VG guestfish -x -a ssh://user@example.com:2000/disk.img </dev/null >test-add-uri.out 2>&1

-grep -sq 'add_drive "/disk.img" "protocol:ssh" "server:tcp:example.com:2000" "username:user"' test-add-uri.out || fail

-

-# iSCSI

-$VG guestfish -x -a iscsi://example.com/iqn.2015-12.com.libguestfs:test1/0 </dev/null >test-add-uri.out 2>&1

-grep -sq 'add_drive "iqn.2015-12.com.libguestfs:test1/0" "protocol:iscsi" "server:tcp:example.com"' test-add-uri.out || fail

-

-$VG guestfish -x -a iscsi://user:password@example.com/iqn.2015-12.com.libguestfs:test2/0 </dev/null >test-add-uri.out 2>&1

-grep -sq 'add_drive "iqn.2015-12.com.libguestfs:test2/0" "protocol:iscsi" "server:tcp:example.com" "username:user" "secret:password"' test-add-uri.out || fail

-

 rm test-add-uri.out

 rm test-add-uri.img

diff --git a/generator/actions_core.ml b/generator/actions_core.ml

index 237edafce..aca5b1f43 100644

--- a/generator/actions_core.ml

+++ b/generator/actions_core.ml

@@ -297,29 +297,6 @@ F<filename> is interpreted as a local file or device.

 This is the default if the optional protocol parameter

 is omitted.

-=item C<protocol = \"ftp\"|\"ftps\"|\"http\"|\"https\"|\"tftp\">

-

-Connect to a remote FTP, HTTP or TFTP server.

-The C<server> parameter must also be supplied - see below.

-

-See also: L<guestfs(3)/FTP, HTTP AND TFTP>

-

-=item C<protocol = \"gluster\">

-

-Connect to the GlusterFS server.

-The C<server> parameter must also be supplied - see below.

-

-See also: L<guestfs(3)/GLUSTER>

-

-=item C<protocol = \"iscsi\">

-

-Connect to the iSCSI server.

-The C<server> parameter must also be supplied - see below.

-The C<username> parameter may be supplied.  See below.

-The C<secret> parameter may be supplied.  See below.

-

-See also: L<guestfs(3)/ISCSI>.

-

 =item C<protocol = \"nbd\">

 Connect to the Network Block Device server.

@@ -336,22 +313,6 @@ The C<secret> parameter may be supplied.  See below.

 See also: L<guestfs(3)/CEPH>.

-=item C<protocol = \"sheepdog\">

-

-Connect to the Sheepdog server.

-The C<server> parameter may also be supplied - see below.

-

-See also: L<guestfs(3)/SHEEPDOG>.

-

-=item C<protocol = \"ssh\">

-

-Connect to the Secure Shell (ssh) server.

-

-The C<server> parameter must be supplied.

-The C<username> parameter may be supplied.  See below.

-

-See also: L<guestfs(3)/SSH>.

-

 =back

 =item C<server>

@@ -362,13 +323,8 @@ is a list of server(s).

  Protocol       Number of servers required

  --------       --------------------------

  file           List must be empty or param not used at all

- ftp|ftps|http|https|tftp  Exactly one

- gluster        Exactly one

- iscsi          Exactly one

  nbd            Exactly one

  rbd            Zero or more

- sheepdog       Zero or more

- ssh            Exactly one

 Each list element is a string specifying a server.  The string must be

 in one of the following formats:

@@ -384,10 +340,10 @@ for the protocol is used (see F</etc/services>).

 =item C<username>

-For the C<ftp>, C<ftps>, C<http>, C<https>, C<iscsi>, C<rbd>, C<ssh>

-and C<tftp> protocols, this specifies the remote username.

+For the C<rbd>

+protocol, this specifies the remote username.

-If not given, then the local username is used for C<ssh>, and no authentication

+If not given, then no authentication

 is attempted for ceph.  But note this sometimes may give unexpected results, for

 example if using the libvirt backend and if the libvirt backend is configured to

 start the qemu appliance as a special user such as C<qemu.qemu>.  If in doubt,

diff --git a/lib/drives.c b/lib/drives.c

index 82ef30093..3d712c6e4 100644

--- a/lib/drives.c

+++ b/lib/drives.c

@@ -165,6 +165,7 @@ create_drive_non_file (guestfs_h *g,

   return drv;

 }

+#if 0 /* DISABLED IN RHEL 8 */

 static struct drive *

 create_drive_curl (guestfs_h *g,

                    const struct drive_create_data *data)

@@ -223,6 +224,7 @@ create_drive_gluster (guestfs_h *g,

   return create_drive_non_file (g, data);

 }

+#endif /* DISABLED IN RHEL 8 */

 static int

 nbd_port (void)

@@ -291,6 +293,7 @@ create_drive_rbd (guestfs_h *g,

   return create_drive_non_file (g, data);

 }

+#if 0 /* DISABLED IN RHEL 8 */

 static struct drive *

 create_drive_sheepdog (guestfs_h *g,

                        const struct drive_create_data *data)

@@ -391,6 +394,7 @@ create_drive_iscsi (guestfs_h *g,

   return create_drive_non_file (g, data);

 }

+#endif /* DISABLED IN RHEL 8 */

 /**

  * Create the special F</dev/null> drive.

@@ -826,6 +830,7 @@ guestfs_impl_add_drive_opts (guestfs_h *g, const char *filename,

       drv = create_drive_file (g, &data);

     }

   }

+#if 0 /* DISABLED IN RHEL 8 */

   else if (STREQ (protocol, "ftp")) {

     data.protocol = drive_protocol_ftp;

     drv = create_drive_curl (g, &data);

@@ -850,6 +855,7 @@ guestfs_impl_add_drive_opts (guestfs_h *g, const char *filename,

     data.protocol = drive_protocol_iscsi;

     drv = create_drive_iscsi (g, &data);

   }

+#endif /* DISABLED IN RHEL 8 */

   else if (STREQ (protocol, "nbd")) {

     data.protocol = drive_protocol_nbd;

     drv = create_drive_nbd (g, &data);

@@ -858,6 +864,7 @@ guestfs_impl_add_drive_opts (guestfs_h *g, const char *filename,

     data.protocol = drive_protocol_rbd;

     drv = create_drive_rbd (g, &data);

   }

+#if 0 /* DISABLED IN RHEL 8 */

   else if (STREQ (protocol, "sheepdog")) {

     data.protocol = drive_protocol_sheepdog;

     drv = create_drive_sheepdog (g, &data);

@@ -870,6 +877,7 @@ guestfs_impl_add_drive_opts (guestfs_h *g, const char *filename,

     data.protocol = drive_protocol_tftp;

     drv = create_drive_curl (g, &data);

   }

+#endif /* DISABLED IN RHEL 8 */

   else {

     error (g, _("unknown protocol ‘%s’"), protocol);

     drv = NULL; /*FALLTHROUGH*/

diff --git a/lib/guestfs.pod b/lib/guestfs.pod

index c7fbeef03..18e336a1f 100644

--- a/lib/guestfs.pod

+++ b/lib/guestfs.pod

@@ -714,70 +714,6 @@ servers.  The server string is documented in

 L</guestfs_add_drive_opts>. The C<username> and C<secret> parameters are

 also optional, and if not given, then no authentication will be used.

-=head3 FTP, HTTP AND TFTP

-

-Libguestfs can access remote disks over FTP, FTPS, HTTP, HTTPS

-or TFTP protocols.

-

-To do this, set the optional C<protocol> and C<server> parameters of

-L</guestfs_add_drive_opts> like this:

-

- char **servers = { "www.example.org", NULL };

- guestfs_add_drive_opts (g, "/disk.img",

-                         GUESTFS_ADD_DRIVE_OPTS_FORMAT, "raw",

-                         GUESTFS_ADD_DRIVE_OPTS_PROTOCOL, "http",

-                         GUESTFS_ADD_DRIVE_OPTS_SERVER, servers,

-                         -1);

-

-The C<protocol> can be one of C<"ftp">, C<"ftps">, C<"http">,

-C<"https"> or C<"tftp">.

-

-C<servers> (the C<server> parameter) is a list which must have a

-single element.  The single element is a string defining the web,

-FTP or TFTP server.  The format of this string is documented in

-L</guestfs_add_drive_opts>.

-

-=head3 GLUSTER

-

-Libguestfs can access Gluster disks.

-

-To do this, set the optional C<protocol> and C<server> parameters of

-L</guestfs_add_drive_opts> like this:

-

- char **servers = { "gluster.example.org:24007", NULL };

- guestfs_add_drive_opts (g, "volname/image",

-                         GUESTFS_ADD_DRIVE_OPTS_FORMAT, "raw",

-                         GUESTFS_ADD_DRIVE_OPTS_PROTOCOL, "gluster",

-                         GUESTFS_ADD_DRIVE_OPTS_SERVER, servers,

-                         -1);

-

-C<servers> (the C<server> parameter) is a list which must have a

-single element.  The single element is a string defining the Gluster

-server.  The format of this string is documented in

-L</guestfs_add_drive_opts>.

-

-Note that gluster usually requires the client process (ie. libguestfs)

-to run as B<root> and will give unfathomable errors if it is not

-(eg. "No data available").

-

-=head3 ISCSI

-

-Libguestfs can access iSCSI disks remotely.

-

-To do this, set the optional C<protocol> and C<server> parameters like

-this:

-

- char **server = { "iscsi.example.org:3000", NULL };

- guestfs_add_drive_opts (g, "target-iqn-name/lun",

-                         GUESTFS_ADD_DRIVE_OPTS_FORMAT, "raw",

-                         GUESTFS_ADD_DRIVE_OPTS_PROTOCOL, "iscsi",

-                         GUESTFS_ADD_DRIVE_OPTS_SERVER, server,

-                         -1);

-

-The C<server> parameter is a list which must have a single element.

-The single element is a string defining the iSCSI server.  The format

-of this string is documented in L</guestfs_add_drive_opts>.

-

 =head3 NETWORK BLOCK DEVICE

 Libguestfs can access Network Block Device (NBD) disks remotely.

@@ -840,42 +776,6 @@ L<https://bugs.launchpad.net/qemu/+bug/1155677>

 =back

-=head3 SHEEPDOG

-

-Libguestfs can access Sheepdog disks.

-

-To do this, set the optional C<protocol> and C<server> parameters of

-L</guestfs_add_drive_opts> like this:

-

- char **servers = { /* optional servers ... */ NULL };

- guestfs_add_drive_opts (g, "volume",

-                         GUESTFS_ADD_DRIVE_OPTS_FORMAT, "raw",

-                         GUESTFS_ADD_DRIVE_OPTS_PROTOCOL, "sheepdog",

-                         GUESTFS_ADD_DRIVE_OPTS_SERVER, servers,

-                         -1);

-

-The optional list of C<servers> may be zero or more server addresses

-(C<"hostname:port">).  The format of the server strings is documented

-in L</guestfs_add_drive_opts>.

-

-=head3 SSH

-

-Libguestfs can access disks over a Secure Shell (SSH) connection.

-

-To do this, set the C<protocol> and C<server> and (optionally)

-C<username> parameters of L</guestfs_add_drive_opts> like this:

-

- char **server = { "remote.example.com", NULL };

- guestfs_add_drive_opts (g, "/path/to/disk.img",

-                         GUESTFS_ADD_DRIVE_OPTS_FORMAT, "raw",

-                         GUESTFS_ADD_DRIVE_OPTS_PROTOCOL, "ssh",

-                         GUESTFS_ADD_DRIVE_OPTS_SERVER, server,

-                         GUESTFS_ADD_DRIVE_OPTS_USERNAME, "remoteuser",

-                         -1);

-

-The format of the server string is documented in

-L</guestfs_add_drive_opts>.

-

 =head2 INSPECTION

 Libguestfs has APIs for inspecting an unknown disk image to find out

diff --git a/tests/disks/test-qemu-drive-libvirt.sh b/tests/disks/test-qemu-drive-libvirt.sh

index ab8052de1..ad22b2fbb 100755

--- a/tests/disks/test-qemu-drive-libvirt.sh

+++ b/tests/disks/test-qemu-drive-libvirt.sh

@@ -64,34 +64,6 @@ check_output

 grep -sq -- '-drive file=rbd:abc-def/ghi-jkl:auth_supported=none,' "$DEBUG_QEMU_FILE" || fail ceph2

 rm "$DEBUG_QEMU_FILE"

-# Gluster.

-

-$guestfish -d gluster run ||:

-check_output

-grep -sq -- '-drive file=gluster://1.2.3.4:1234/volname/image,' "$DEBUG_QEMU_FILE" || fail gluster

-rm "$DEBUG_QEMU_FILE"

-

-# iSCSI.

-

-$guestfish -d iscsi run ||:

-check_output

-grep -sq -- '-drive file=iscsi://1.2.3.4:1234/iqn.2003-01.org.linux-iscsi.fedora' "$DEBUG_QEMU_FILE" || fail iscsi

-rm "$DEBUG_QEMU_FILE"

-

-# NBD.

-

-$guestfish -d nbd run ||:

-check_output

-grep -sq -- '-drive file=nbd:1.2.3.4:1234,' "$DEBUG_QEMU_FILE" || fail nbd

-rm "$DEBUG_QEMU_FILE"

-

-# Sheepdog.

-

-$guestfish -d sheepdog run ||:

-check_output

-grep -sq -- '-drive file=sheepdog:volume,' "$DEBUG_QEMU_FILE" || fail sheepdog

-rm "$DEBUG_QEMU_FILE"

-

 # Local, stored in a pool.

 $guestfish -d pool1 run ||:

diff --git a/tests/disks/test-qemu-drive.sh b/tests/disks/test-qemu-drive.sh

index 19dd60a2f..583e031bd 100755

--- a/tests/disks/test-qemu-drive.sh

+++ b/tests/disks/test-qemu-drive.sh

@@ -62,45 +62,6 @@ check_output

 grep -sq -- '-drive file=rbd:abc-def/ghi-jkl:auth_supported=none,' "$DEBUG_QEMU_FILE" || fail

 rm "$DEBUG_QEMU_FILE"

-# HTTP.

-

-guestfish <

-  add "/disk.img" "format:raw" "protocol:http" "server:www.example.com"

-  run

-EOF

-check_output

-grep -sq -- '-drive file=http://www.example.com/disk.img,' "$DEBUG_QEMU_FILE" || fail

-rm "$DEBUG_QEMU_FILE"

-

-# Gluster.

-

-guestfish <

-  add "volname/image" "format:raw" "protocol:gluster" "server:www.example.com:24007"

-  run

-EOF

-check_output

-grep -sq -- '-drive file=gluster://www.example.com:24007/volname/image,' "$DEBUG_QEMU_FILE" || fail

-rm "$DEBUG_QEMU_FILE"

-

-# iSCSI.

-

-guestfish <

-  add "target-iqn-name/lun" "format:raw" "protocol:iscsi" "server:www.example.com:3000"

-  run

-EOF

-check_output

-grep -sq -- '-drive file=iscsi://www.example.com:3000/target-iqn-name/lun,' "$DEBUG_QEMU_FILE" || fail

-rm "$DEBUG_QEMU_FILE"

-

-guestfish <

-  add "target-iqn-name/lun" "format:raw" "protocol:iscsi" "server:www.example.com:3000" \

-    "username:user" "secret:pass"

-  run

-EOF

-check_output

-grep -sq -- '-drive file=iscsi://user%pass@www.example.com:3000/target-iqn-name/lun,' "$DEBUG_QEMU_FILE" || fail

-rm "$DEBUG_QEMU_FILE"

-

 # NBD.

 guestfish <

@@ -118,24 +79,3 @@ EOF

 check_output

 grep -sq -- '-drive file=nbd:unix:/socket,' "$DEBUG_QEMU_FILE" || fail

 rm "$DEBUG_QEMU_FILE"

-

-# Sheepdog.

-

-guestfish <

-  add "volume" "format:raw" "protocol:sheepdog"

-  run

-EOF

-check_output

-grep -sq -- '-drive file=sheepdog:volume,' "$DEBUG_QEMU_FILE" || fail

-rm "$DEBUG_QEMU_FILE"

-

-# SSH.

-

-guestfish <

-  add "/disk.img" "format:raw" "protocol:ssh" "server:example.com" \

-    "username:rich"

-  run

-EOF

-check_output

-grep -sq -- '-drive file=ssh://rich@example.com/disk.img,' "$DEBUG_QEMU_FILE" || fail

-rm "$DEBUG_QEMU_FILE"

-- 

2.21.0