husy394 / rpms / kernel

Forked from rpms/kernel 3 years ago
Clone
f2c60e
From 1b28a544627ddce094091946f06f99bc41d0098f Mon Sep 17 00:00:00 2001
f2c60e
From: Corentin LABBE <clabbe.montjoie@gmail.com>
f2c60e
Date: Tue, 24 Oct 2017 19:57:12 +0200
f2c60e
Subject: [PATCH 01/11] net: stmmac: snps, dwmac-mdio MDIOs are automatically
f2c60e
 registered
f2c60e
f2c60e
stmmac bindings docs said that its mdio node must have
f2c60e
compatible = "snps,dwmac-mdio";
f2c60e
Since dwmac-sun8i does not have any good reasons to not doing it, all
f2c60e
their MDIO node must have it.
f2c60e
f2c60e
Since these compatible is automatically registered, dwmac-sun8i compatible
f2c60e
does not need to be in need_mdio_ids.
f2c60e
f2c60e
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
f2c60e
---
f2c60e
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 4 ----
f2c60e
 1 file changed, 4 deletions(-)
f2c60e
f2c60e
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
f2c60e
index 6383695004a5..645ef949705f 100644
f2c60e
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
f2c60e
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
f2c60e
@@ -318,10 +318,6 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
f2c60e
 	bool mdio = true;
f2c60e
 	static const struct of_device_id need_mdio_ids[] = {
f2c60e
 		{ .compatible = "snps,dwc-qos-ethernet-4.10" },
f2c60e
-		{ .compatible = "allwinner,sun8i-a83t-emac" },
f2c60e
-		{ .compatible = "allwinner,sun8i-h3-emac" },
f2c60e
-		{ .compatible = "allwinner,sun8i-v3s-emac" },
f2c60e
-		{ .compatible = "allwinner,sun50i-a64-emac" },
f2c60e
 		{},
f2c60e
 	};
f2c60e
 
f2c60e
-- 
f2c60e
2.14.3
f2c60e
f2c60e
From 9a5b1d9a7614b022512744896d889e76f687e90a Mon Sep 17 00:00:00 2001
f2c60e
From: Corentin LABBE <clabbe.montjoie@gmail.com>
f2c60e
Date: Tue, 24 Oct 2017 19:57:13 +0200
f2c60e
Subject: [PATCH 02/11] net: stmmac: dwmac-sun8i: Handle integrated/external
f2c60e
 MDIOs
f2c60e
f2c60e
The Allwinner H3 SoC have two distinct MDIO bus, only one could be
f2c60e
active at the same time.
f2c60e
The selection of the active MDIO bus are done via some bits in the EMAC
f2c60e
register of the system controller.
f2c60e
f2c60e
This patch implement this MDIO switch via a custom MDIO-mux.
f2c60e
f2c60e
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
f2c60e
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
f2c60e
---
f2c60e
 drivers/net/ethernet/stmicro/stmmac/Kconfig       |   1 +
f2c60e
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 353 ++++++++++++++--------
f2c60e
 2 files changed, 224 insertions(+), 130 deletions(-)
f2c60e
f2c60e
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
f2c60e
index 97035766c291..e28c0d2c58e9 100644
f2c60e
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
f2c60e
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
f2c60e
@@ -159,6 +159,7 @@ config DWMAC_SUN8I
f2c60e
 	tristate "Allwinner sun8i GMAC support"
f2c60e
 	default ARCH_SUNXI
f2c60e
 	depends on OF && (ARCH_SUNXI || COMPILE_TEST)
f2c60e
+	select MDIO_BUS_MUX
f2c60e
 	---help---
f2c60e
 	  Support for Allwinner H3 A83T A64 EMAC ethernet controllers.
f2c60e
 
f2c60e
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
f2c60e
index 39c2122a4f26..b3eb344bb158 100644
f2c60e
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
f2c60e
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
f2c60e
@@ -17,6 +17,7 @@
f2c60e
 #include <linux/clk.h>
f2c60e
 #include <linux/io.h>
f2c60e
 #include <linux/iopoll.h>
f2c60e
+#include <linux/mdio-mux.h>
f2c60e
 #include <linux/mfd/syscon.h>
f2c60e
 #include <linux/module.h>
f2c60e
 #include <linux/of_device.h>
f2c60e
@@ -41,14 +42,14 @@
f2c60e
  *				This value is used for disabling properly EMAC
f2c60e
  *				and used as a good starting value in case of the
f2c60e
  *				boot process(uboot) leave some stuff.
f2c60e
- * @internal_phy:		Does the MAC embed an internal PHY
f2c60e
+ * @soc_has_internal_phy:	Does the MAC embed an internal PHY
f2c60e
  * @support_mii:		Does the MAC handle MII
f2c60e
  * @support_rmii:		Does the MAC handle RMII
f2c60e
  * @support_rgmii:		Does the MAC handle RGMII
f2c60e
  */
f2c60e
 struct emac_variant {
f2c60e
 	u32 default_syscon_value;
f2c60e
-	int internal_phy;
f2c60e
+	bool soc_has_internal_phy;
f2c60e
 	bool support_mii;
f2c60e
 	bool support_rmii;
f2c60e
 	bool support_rgmii;
f2c60e
@@ -61,7 +62,8 @@ struct emac_variant {
f2c60e
  * @rst_ephy:	reference to the optional EPHY reset for the internal PHY
f2c60e
  * @variant:	reference to the current board variant
f2c60e
  * @regmap:	regmap for using the syscon
f2c60e
- * @use_internal_phy: Does the current PHY choice imply using the internal PHY
f2c60e
+ * @internal_phy_powered: Does the internal PHY is enabled
f2c60e
+ * @mux_handle:	Internal pointer used by mdio-mux lib
f2c60e
  */
f2c60e
 struct sunxi_priv_data {
f2c60e
 	struct clk *tx_clk;
f2c60e
@@ -70,12 +72,13 @@ struct sunxi_priv_data {
f2c60e
 	struct reset_control *rst_ephy;
f2c60e
 	const struct emac_variant *variant;
f2c60e
 	struct regmap *regmap;
f2c60e
-	bool use_internal_phy;
f2c60e
+	bool internal_phy_powered;
f2c60e
+	void *mux_handle;
f2c60e
 };
f2c60e
 
f2c60e
 static const struct emac_variant emac_variant_h3 = {
f2c60e
 	.default_syscon_value = 0x58000,
f2c60e
-	.internal_phy = PHY_INTERFACE_MODE_MII,
f2c60e
+	.soc_has_internal_phy = true,
f2c60e
 	.support_mii = true,
f2c60e
 	.support_rmii = true,
f2c60e
 	.support_rgmii = true
f2c60e
@@ -83,20 +86,20 @@ static const struct emac_variant emac_variant_h3 = {
f2c60e
 
f2c60e
 static const struct emac_variant emac_variant_v3s = {
f2c60e
 	.default_syscon_value = 0x38000,
f2c60e
-	.internal_phy = PHY_INTERFACE_MODE_MII,
f2c60e
+	.soc_has_internal_phy = true,
f2c60e
 	.support_mii = true
f2c60e
 };
f2c60e
 
f2c60e
 static const struct emac_variant emac_variant_a83t = {
f2c60e
 	.default_syscon_value = 0,
f2c60e
-	.internal_phy = 0,
f2c60e
+	.soc_has_internal_phy = false,
f2c60e
 	.support_mii = true,
f2c60e
 	.support_rgmii = true
f2c60e
 };
f2c60e
 
f2c60e
 static const struct emac_variant emac_variant_a64 = {
f2c60e
 	.default_syscon_value = 0,
f2c60e
-	.internal_phy = 0,
f2c60e
+	.soc_has_internal_phy = false,
f2c60e
 	.support_mii = true,
f2c60e
 	.support_rmii = true,
f2c60e
 	.support_rgmii = true
f2c60e
@@ -195,6 +198,9 @@ static const struct emac_variant emac_variant_a64 = {
f2c60e
 #define H3_EPHY_LED_POL		BIT(17) /* 1: active low, 0: active high */
f2c60e
 #define H3_EPHY_SHUTDOWN	BIT(16) /* 1: shutdown, 0: power up */
f2c60e
 #define H3_EPHY_SELECT		BIT(15) /* 1: internal PHY, 0: external PHY */
f2c60e
+#define H3_EPHY_MUX_MASK	(H3_EPHY_SHUTDOWN | H3_EPHY_SELECT)
f2c60e
+#define DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID	1
f2c60e
+#define DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID	2
f2c60e
 
f2c60e
 /* H3/A64 specific bits */
f2c60e
 #define SYSCON_RMII_EN		BIT(13) /* 1: enable RMII (overrides EPIT) */
f2c60e
@@ -634,6 +640,159 @@ static int sun8i_dwmac_reset(struct stmmac_priv *priv)
f2c60e
 	return 0;
f2c60e
 }
f2c60e
 
f2c60e
+/* Search in mdio-mux node for internal PHY node and get its clk/reset */
f2c60e
+static int get_ephy_nodes(struct stmmac_priv *priv)
f2c60e
+{
f2c60e
+	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
f2c60e
+	struct device_node *mdio_mux, *iphynode;
f2c60e
+	struct device_node *mdio_internal;
f2c60e
+	int ret;
f2c60e
+
f2c60e
+	mdio_mux = of_get_child_by_name(priv->device->of_node, "mdio-mux");
f2c60e
+	if (!mdio_mux) {
f2c60e
+		dev_err(priv->device, "Cannot get mdio-mux node\n");
f2c60e
+		return -ENODEV;
f2c60e
+	}
f2c60e
+
f2c60e
+	mdio_internal = of_find_compatible_node(mdio_mux, NULL,
f2c60e
+						"allwinner,sun8i-h3-mdio-internal");
f2c60e
+	if (!mdio_internal) {
f2c60e
+		dev_err(priv->device, "Cannot get internal_mdio node\n");
f2c60e
+		return -ENODEV;
f2c60e
+	}
f2c60e
+
f2c60e
+	/* Seek for internal PHY */
f2c60e
+	for_each_child_of_node(mdio_internal, iphynode) {
f2c60e
+		gmac->ephy_clk = of_clk_get(iphynode, 0);
f2c60e
+		if (IS_ERR(gmac->ephy_clk))
f2c60e
+			continue;
f2c60e
+		gmac->rst_ephy = of_reset_control_get_exclusive(iphynode, NULL);
f2c60e
+		if (IS_ERR(gmac->rst_ephy)) {
f2c60e
+			ret = PTR_ERR(gmac->rst_ephy);
f2c60e
+			if (ret == -EPROBE_DEFER)
f2c60e
+				return ret;
f2c60e
+			continue;
f2c60e
+		}
f2c60e
+		dev_info(priv->device, "Found internal PHY node\n");
f2c60e
+		return 0;
f2c60e
+	}
f2c60e
+	return -ENODEV;
f2c60e
+}
f2c60e
+
f2c60e
+static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv)
f2c60e
+{
f2c60e
+	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
f2c60e
+	int ret;
f2c60e
+
f2c60e
+	if (gmac->internal_phy_powered) {
f2c60e
+		dev_warn(priv->device, "Internal PHY already powered\n");
f2c60e
+		return 0;
f2c60e
+	}
f2c60e
+
f2c60e
+	dev_info(priv->device, "Powering internal PHY\n");
f2c60e
+	ret = clk_prepare_enable(gmac->ephy_clk);
f2c60e
+	if (ret) {
f2c60e
+		dev_err(priv->device, "Cannot enable internal PHY\n");
f2c60e
+		return ret;
f2c60e
+	}
f2c60e
+
f2c60e
+	/* Make sure the EPHY is properly reseted, as U-Boot may leave
f2c60e
+	 * it at deasserted state, and thus it may fail to reset EMAC.
f2c60e
+	 */
f2c60e
+	reset_control_assert(gmac->rst_ephy);
f2c60e
+
f2c60e
+	ret = reset_control_deassert(gmac->rst_ephy);
f2c60e
+	if (ret) {
f2c60e
+		dev_err(priv->device, "Cannot deassert internal phy\n");
f2c60e
+		clk_disable_unprepare(gmac->ephy_clk);
f2c60e
+		return ret;
f2c60e
+	}
f2c60e
+
f2c60e
+	gmac->internal_phy_powered = true;
f2c60e
+
f2c60e
+	return 0;
f2c60e
+}
f2c60e
+
f2c60e
+static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac)
f2c60e
+{
f2c60e
+	if (!gmac->internal_phy_powered)
f2c60e
+		return 0;
f2c60e
+
f2c60e
+	clk_disable_unprepare(gmac->ephy_clk);
f2c60e
+	reset_control_assert(gmac->rst_ephy);
f2c60e
+	gmac->internal_phy_powered = false;
f2c60e
+	return 0;
f2c60e
+}
f2c60e
+
f2c60e
+/* MDIO multiplexing switch function
f2c60e
+ * This function is called by the mdio-mux layer when it thinks the mdio bus
f2c60e
+ * multiplexer needs to switch.
f2c60e
+ * 'current_child' is the current value of the mux register
f2c60e
+ * 'desired_child' is the value of the 'reg' property of the target child MDIO
f2c60e
+ * node.
f2c60e
+ * The first time this function is called, current_child == -1.
f2c60e
+ * If current_child == desired_child, then the mux is already set to the
f2c60e
+ * correct bus.
f2c60e
+ */
f2c60e
+static int mdio_mux_syscon_switch_fn(int current_child, int desired_child,
f2c60e
+				     void *data)
f2c60e
+{
f2c60e
+	struct stmmac_priv *priv = data;
f2c60e
+	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
f2c60e
+	u32 reg, val;
f2c60e
+	int ret = 0;
f2c60e
+	bool need_power_ephy = false;
f2c60e
+
f2c60e
+	if (current_child ^ desired_child) {
f2c60e
+		regmap_read(gmac->regmap, SYSCON_EMAC_REG, ®);
f2c60e
+		switch (desired_child) {
f2c60e
+		case DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID:
f2c60e
+			dev_info(priv->device, "Switch mux to internal PHY");
f2c60e
+			val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SELECT;
f2c60e
+
f2c60e
+			need_power_ephy = true;
f2c60e
+			break;
f2c60e
+		case DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID:
f2c60e
+			dev_info(priv->device, "Switch mux to external PHY");
f2c60e
+			val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SHUTDOWN;
f2c60e
+			need_power_ephy = false;
f2c60e
+			break;
f2c60e
+		default:
f2c60e
+			dev_err(priv->device, "Invalid child ID %x\n",
f2c60e
+				desired_child);
f2c60e
+			return -EINVAL;
f2c60e
+		}
f2c60e
+		regmap_write(gmac->regmap, SYSCON_EMAC_REG, val);
f2c60e
+		if (need_power_ephy) {
f2c60e
+			ret = sun8i_dwmac_power_internal_phy(priv);
f2c60e
+			if (ret)
f2c60e
+				return ret;
f2c60e
+		} else {
f2c60e
+			sun8i_dwmac_unpower_internal_phy(gmac);
f2c60e
+		}
f2c60e
+		/* After changing syscon value, the MAC need reset or it will
f2c60e
+		 * use the last value (and so the last PHY set).
f2c60e
+		 */
f2c60e
+		ret = sun8i_dwmac_reset(priv);
f2c60e
+	}
f2c60e
+	return ret;
f2c60e
+}
f2c60e
+
f2c60e
+static int sun8i_dwmac_register_mdio_mux(struct stmmac_priv *priv)
f2c60e
+{
f2c60e
+	int ret;
f2c60e
+	struct device_node *mdio_mux;
f2c60e
+	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
f2c60e
+
f2c60e
+	mdio_mux = of_get_child_by_name(priv->device->of_node, "mdio-mux");
f2c60e
+	if (!mdio_mux)
f2c60e
+		return -ENODEV;
f2c60e
+
f2c60e
+	ret = mdio_mux_init(priv->device, mdio_mux, mdio_mux_syscon_switch_fn,
f2c60e
+			    &gmac->mux_handle, priv, priv->mii);
f2c60e
+	return ret;
f2c60e
+}
f2c60e
+
f2c60e
 static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
f2c60e
 {
f2c60e
 	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
f2c60e
@@ -648,35 +807,25 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
f2c60e
 			 "Current syscon value is not the default %x (expect %x)\n",
f2c60e
 			 val, reg);
f2c60e
 
f2c60e
-	if (gmac->variant->internal_phy) {
f2c60e
-		if (!gmac->use_internal_phy) {
f2c60e
-			/* switch to external PHY interface */
f2c60e
-			reg &= ~H3_EPHY_SELECT;
f2c60e
-		} else {
f2c60e
-			reg |= H3_EPHY_SELECT;
f2c60e
-			reg &= ~H3_EPHY_SHUTDOWN;
f2c60e
-			dev_dbg(priv->device, "Select internal_phy %x\n", reg);
f2c60e
-
f2c60e
-			if (of_property_read_bool(priv->plat->phy_node,
f2c60e
-						  "allwinner,leds-active-low"))
f2c60e
-				reg |= H3_EPHY_LED_POL;
f2c60e
-			else
f2c60e
-				reg &= ~H3_EPHY_LED_POL;
f2c60e
-
f2c60e
-			/* Force EPHY xtal frequency to 24MHz. */
f2c60e
-			reg |= H3_EPHY_CLK_SEL;
f2c60e
-
f2c60e
-			ret = of_mdio_parse_addr(priv->device,
f2c60e
-						 priv->plat->phy_node);
f2c60e
-			if (ret < 0) {
f2c60e
-				dev_err(priv->device, "Could not parse MDIO addr\n");
f2c60e
-				return ret;
f2c60e
-			}
f2c60e
-			/* of_mdio_parse_addr returns a valid (0 ~ 31) PHY
f2c60e
-			 * address. No need to mask it again.
f2c60e
-			 */
f2c60e
-			reg |= ret << H3_EPHY_ADDR_SHIFT;
f2c60e
+	if (gmac->variant->soc_has_internal_phy) {
f2c60e
+		if (of_property_read_bool(priv->plat->phy_node,
f2c60e
+					  "allwinner,leds-active-low"))
f2c60e
+			reg |= H3_EPHY_LED_POL;
f2c60e
+		else
f2c60e
+			reg &= ~H3_EPHY_LED_POL;
f2c60e
+
f2c60e
+		/* Force EPHY xtal frequency to 24MHz. */
f2c60e
+		reg |= H3_EPHY_CLK_SEL;
f2c60e
+
f2c60e
+		ret = of_mdio_parse_addr(priv->device, priv->plat->phy_node);
f2c60e
+		if (ret < 0) {
f2c60e
+			dev_err(priv->device, "Could not parse MDIO addr\n");
f2c60e
+			return ret;
f2c60e
 		}
f2c60e
+		/* of_mdio_parse_addr returns a valid (0 ~ 31) PHY
f2c60e
+		 * address. No need to mask it again.
f2c60e
+		 */
f2c60e
+		reg |= 1 << H3_EPHY_ADDR_SHIFT;
f2c60e
 	}
f2c60e
 
f2c60e
 	if (!of_property_read_u32(node, "allwinner,tx-delay-ps", &val)) {
f2c60e
@@ -746,81 +895,21 @@ static void sun8i_dwmac_unset_syscon(struct sunxi_priv_data *gmac)
f2c60e
 	regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg);
f2c60e
 }
f2c60e
 
f2c60e
-static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv)
f2c60e
+static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
f2c60e
 {
f2c60e
-	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
f2c60e
-	int ret;
f2c60e
-
f2c60e
-	if (!gmac->use_internal_phy)
f2c60e
-		return 0;
f2c60e
-
f2c60e
-	ret = clk_prepare_enable(gmac->ephy_clk);
f2c60e
-	if (ret) {
f2c60e
-		dev_err(priv->device, "Cannot enable ephy\n");
f2c60e
-		return ret;
f2c60e
-	}
f2c60e
-
f2c60e
-	/* Make sure the EPHY is properly reseted, as U-Boot may leave
f2c60e
-	 * it at deasserted state, and thus it may fail to reset EMAC.
f2c60e
-	 */
f2c60e
-	reset_control_assert(gmac->rst_ephy);
f2c60e
+	struct sunxi_priv_data *gmac = priv;
f2c60e
 
f2c60e
-	ret = reset_control_deassert(gmac->rst_ephy);
f2c60e
-	if (ret) {
f2c60e
-		dev_err(priv->device, "Cannot deassert ephy\n");
f2c60e
-		clk_disable_unprepare(gmac->ephy_clk);
f2c60e
-		return ret;
f2c60e
+	if (gmac->variant->soc_has_internal_phy) {
f2c60e
+		/* sun8i_dwmac_exit could be called with mdiomux uninit */
f2c60e
+		if (gmac->mux_handle)
f2c60e
+			mdio_mux_uninit(gmac->mux_handle);
f2c60e
+		if (gmac->internal_phy_powered)
f2c60e
+			sun8i_dwmac_unpower_internal_phy(gmac);
f2c60e
 	}
f2c60e
 
f2c60e
-	return 0;
f2c60e
-}
f2c60e
-
f2c60e
-static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac)
f2c60e
-{
f2c60e
-	if (!gmac->use_internal_phy)
f2c60e
-		return 0;
f2c60e
-
f2c60e
-	clk_disable_unprepare(gmac->ephy_clk);
f2c60e
-	reset_control_assert(gmac->rst_ephy);
f2c60e
-	return 0;
f2c60e
-}
f2c60e
-
f2c60e
-/* sun8i_power_phy() - Activate the PHY:
f2c60e
- * In case of error, no need to call sun8i_unpower_phy(),
f2c60e
- * it will be called anyway by sun8i_dwmac_exit()
f2c60e
- */
f2c60e
-static int sun8i_power_phy(struct stmmac_priv *priv)
f2c60e
-{
f2c60e
-	int ret;
f2c60e
-
f2c60e
-	ret = sun8i_dwmac_power_internal_phy(priv);
f2c60e
-	if (ret)
f2c60e
-		return ret;
f2c60e
-
f2c60e
-	ret = sun8i_dwmac_set_syscon(priv);
f2c60e
-	if (ret)
f2c60e
-		return ret;
f2c60e
-
f2c60e
-	/* After changing syscon value, the MAC need reset or it will use
f2c60e
-	 * the last value (and so the last PHY set.
f2c60e
-	 */
f2c60e
-	ret = sun8i_dwmac_reset(priv);
f2c60e
-	if (ret)
f2c60e
-		return ret;
f2c60e
-	return 0;
f2c60e
-}
f2c60e
-
f2c60e
-static void sun8i_unpower_phy(struct sunxi_priv_data *gmac)
f2c60e
-{
f2c60e
 	sun8i_dwmac_unset_syscon(gmac);
f2c60e
-	sun8i_dwmac_unpower_internal_phy(gmac);
f2c60e
-}
f2c60e
-
f2c60e
-static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
f2c60e
-{
f2c60e
-	struct sunxi_priv_data *gmac = priv;
f2c60e
 
f2c60e
-	sun8i_unpower_phy(gmac);
f2c60e
+	reset_control_put(gmac->rst_ephy);
f2c60e
 
f2c60e
 	clk_disable_unprepare(gmac->tx_clk);
f2c60e
 
f2c60e
@@ -849,7 +938,7 @@ static struct mac_device_info *sun8i_dwmac_setup(void *ppriv)
f2c60e
 	if (!mac)
f2c60e
 		return NULL;
f2c60e
 
f2c60e
-	ret = sun8i_power_phy(priv);
f2c60e
+	ret = sun8i_dwmac_set_syscon(priv);
f2c60e
 	if (ret)
f2c60e
 		return NULL;
f2c60e
 
f2c60e
@@ -889,6 +978,8 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
f2c60e
 	struct sunxi_priv_data *gmac;
f2c60e
 	struct device *dev = &pdev->dev;
f2c60e
 	int ret;
f2c60e
+	struct stmmac_priv *priv;
f2c60e
+	struct net_device *ndev;
f2c60e
 
f2c60e
 	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
f2c60e
 	if (ret)
f2c60e
@@ -932,29 +1023,6 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
f2c60e
 	}
f2c60e
 
f2c60e
 	plat_dat->interface = of_get_phy_mode(dev->of_node);
f2c60e
-	if (plat_dat->interface == gmac->variant->internal_phy) {
f2c60e
-		dev_info(&pdev->dev, "Will use internal PHY\n");
f2c60e
-		gmac->use_internal_phy = true;
f2c60e
-		gmac->ephy_clk = of_clk_get(plat_dat->phy_node, 0);
f2c60e
-		if (IS_ERR(gmac->ephy_clk)) {
f2c60e
-			ret = PTR_ERR(gmac->ephy_clk);
f2c60e
-			dev_err(&pdev->dev, "Cannot get EPHY clock: %d\n", ret);
f2c60e
-			return -EINVAL;
f2c60e
-		}
f2c60e
-
f2c60e
-		gmac->rst_ephy = of_reset_control_get(plat_dat->phy_node, NULL);
f2c60e
-		if (IS_ERR(gmac->rst_ephy)) {
f2c60e
-			ret = PTR_ERR(gmac->rst_ephy);
f2c60e
-			if (ret == -EPROBE_DEFER)
f2c60e
-				return ret;
f2c60e
-			dev_err(&pdev->dev, "No EPHY reset control found %d\n",
f2c60e
-				ret);
f2c60e
-			return -EINVAL;
f2c60e
-		}
f2c60e
-	} else {
f2c60e
-		dev_info(&pdev->dev, "Will use external PHY\n");
f2c60e
-		gmac->use_internal_phy = false;
f2c60e
-	}
f2c60e
 
f2c60e
 	/* platform data specifying hardware features and callbacks.
f2c60e
 	 * hardware features were copied from Allwinner drivers.
f2c60e
@@ -973,9 +1041,34 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
f2c60e
 
f2c60e
 	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
f2c60e
 	if (ret)
f2c60e
-		sun8i_dwmac_exit(pdev, plat_dat->bsp_priv);
f2c60e
+		goto dwmac_exit;
f2c60e
+
f2c60e
+	ndev = dev_get_drvdata(&pdev->dev);
f2c60e
+	priv = netdev_priv(ndev);
f2c60e
+	/* The mux must be registered after parent MDIO
f2c60e
+	 * so after stmmac_dvr_probe()
f2c60e
+	 */
f2c60e
+	if (gmac->variant->soc_has_internal_phy) {
f2c60e
+		ret = get_ephy_nodes(priv);
f2c60e
+		if (ret)
f2c60e
+			goto dwmac_exit;
f2c60e
+		ret = sun8i_dwmac_register_mdio_mux(priv);
f2c60e
+		if (ret) {
f2c60e
+			dev_err(&pdev->dev, "Failed to register mux\n");
f2c60e
+			goto dwmac_mux;
f2c60e
+		}
f2c60e
+	} else {
f2c60e
+		ret = sun8i_dwmac_reset(priv);
f2c60e
+		if (ret)
f2c60e
+			goto dwmac_exit;
f2c60e
+	}
f2c60e
 
f2c60e
 	return ret;
f2c60e
+dwmac_mux:
f2c60e
+	sun8i_dwmac_unset_syscon(gmac);
f2c60e
+dwmac_exit:
f2c60e
+	sun8i_dwmac_exit(pdev, plat_dat->bsp_priv);
f2c60e
+return ret;
f2c60e
 }
f2c60e
 
f2c60e
 static const struct of_device_id sun8i_dwmac_match[] = {
f2c60e
-- 
f2c60e
2.14.3
f2c60e
f2c60e
From f58f11ebb67468471ed8f232c576f348dd1a32b1 Mon Sep 17 00:00:00 2001
f2c60e
From: Corentin LABBE <clabbe.montjoie@gmail.com>
f2c60e
Date: Tue, 24 Oct 2017 19:57:14 +0200
f2c60e
Subject: [PATCH 03/11] net: stmmac: sun8i: Restore the compatibles
f2c60e
f2c60e
The original dwmac-sun8i DT bindings have some issue on how to handle
f2c60e
integrated PHY and was reverted in last RC of 4.13.
f2c60e
But now we have a solution so we need to get back that was reverted.
f2c60e
f2c60e
This patch restore compatibles about dwmac-sun8i
f2c60e
This reverts commit ad4540cc5aa3 ("net: stmmac: sun8i: Remove the compatibles")
f2c60e
f2c60e
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
f2c60e
---
f2c60e
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 8 ++++++++
f2c60e
 1 file changed, 8 insertions(+)
f2c60e
f2c60e
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
f2c60e
index b3eb344bb158..e5ff734d4f9b 100644
f2c60e
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
f2c60e
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
f2c60e
@@ -1072,6 +1072,14 @@ return ret;
f2c60e
 }
f2c60e
 
f2c60e
 static const struct of_device_id sun8i_dwmac_match[] = {
f2c60e
+	{ .compatible = "allwinner,sun8i-h3-emac",
f2c60e
+		.data = &emac_variant_h3 },
f2c60e
+	{ .compatible = "allwinner,sun8i-v3s-emac",
f2c60e
+		.data = &emac_variant_v3s },
f2c60e
+	{ .compatible = "allwinner,sun8i-a83t-emac",
f2c60e
+		.data = &emac_variant_a83t },
f2c60e
+	{ .compatible = "allwinner,sun50i-a64-emac",
f2c60e
+		.data = &emac_variant_a64 },
f2c60e
 	{ }
f2c60e
 };
f2c60e
 MODULE_DEVICE_TABLE(of, sun8i_dwmac_match);
f2c60e
-- 
f2c60e
2.14.3
f2c60e
f2c60e
From 54678636d98cd9625f342c831015e302642bf104 Mon Sep 17 00:00:00 2001
f2c60e
From: Corentin LABBE <clabbe.montjoie@gmail.com>
f2c60e
Date: Tue, 31 Oct 2017 09:19:08 +0100
f2c60e
Subject: [PATCH 04/11] dt-bindings: net: Restore sun8i dwmac binding
f2c60e
f2c60e
The original dwmac-sun8i DT bindings have some issue on how to handle
f2c60e
integrated PHY and was reverted in last RC of 4.13.
f2c60e
But now we have a solution so we need to get back that was reverted.
f2c60e
f2c60e
This patch restore dt-bindings documentation about dwmac-sun8i
f2c60e
This reverts commit 8aa33ec2f481 ("dt-bindings: net: Revert sun8i dwmac binding")
f2c60e
f2c60e
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
f2c60e
Acked-by: Rob Herring <robh@kernel.org>
f2c60e
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
f2c60e
---
f2c60e
 .../devicetree/bindings/net/dwmac-sun8i.txt        | 84 ++++++++++++++++++++++
f2c60e
 1 file changed, 84 insertions(+)
f2c60e
 create mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt
f2c60e
f2c60e
diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
f2c60e
new file mode 100644
f2c60e
index 000000000000..725f3b187886
f2c60e
--- /dev/null
f2c60e
+++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
f2c60e
@@ -0,0 +1,84 @@
f2c60e
+* Allwinner sun8i GMAC ethernet controller
f2c60e
+
f2c60e
+This device is a platform glue layer for stmmac.
f2c60e
+Please see stmmac.txt for the other unchanged properties.
f2c60e
+
f2c60e
+Required properties:
f2c60e
+- compatible: should be one of the following string:
f2c60e
+		"allwinner,sun8i-a83t-emac"
f2c60e
+		"allwinner,sun8i-h3-emac"
f2c60e
+		"allwinner,sun8i-v3s-emac"
f2c60e
+		"allwinner,sun50i-a64-emac"
f2c60e
+- reg: address and length of the register for the device.
f2c60e
+- interrupts: interrupt for the device
f2c60e
+- interrupt-names: should be "macirq"
f2c60e
+- clocks: A phandle to the reference clock for this device
f2c60e
+- clock-names: should be "stmmaceth"
f2c60e
+- resets: A phandle to the reset control for this device
f2c60e
+- reset-names: should be "stmmaceth"
f2c60e
+- phy-mode: See ethernet.txt
f2c60e
+- phy-handle: See ethernet.txt
f2c60e
+- #address-cells: shall be 1
f2c60e
+- #size-cells: shall be 0
f2c60e
+- syscon: A phandle to the syscon of the SoC with one of the following
f2c60e
+ compatible string:
f2c60e
+  - allwinner,sun8i-h3-system-controller
f2c60e
+  - allwinner,sun8i-v3s-system-controller
f2c60e
+  - allwinner,sun50i-a64-system-controller
f2c60e
+  - allwinner,sun8i-a83t-system-controller
f2c60e
+
f2c60e
+Optional properties:
f2c60e
+- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0)
f2c60e
+- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0)
f2c60e
+Both delay properties need to be a multiple of 100. They control the delay for
f2c60e
+external PHY.
f2c60e
+
f2c60e
+Optional properties for the following compatibles:
f2c60e
+  - "allwinner,sun8i-h3-emac",
f2c60e
+  - "allwinner,sun8i-v3s-emac":
f2c60e
+- allwinner,leds-active-low: EPHY LEDs are active low
f2c60e
+
f2c60e
+Required child node of emac:
f2c60e
+- mdio bus node: should be named mdio
f2c60e
+
f2c60e
+Required properties of the mdio node:
f2c60e
+- #address-cells: shall be 1
f2c60e
+- #size-cells: shall be 0
f2c60e
+
f2c60e
+The device node referenced by "phy" or "phy-handle" should be a child node
f2c60e
+of the mdio node. See phy.txt for the generic PHY bindings.
f2c60e
+
f2c60e
+Required properties of the phy node with the following compatibles:
f2c60e
+  - "allwinner,sun8i-h3-emac",
f2c60e
+  - "allwinner,sun8i-v3s-emac":
f2c60e
+- clocks: a phandle to the reference clock for the EPHY
f2c60e
+- resets: a phandle to the reset control for the EPHY
f2c60e
+
f2c60e
+Example:
f2c60e
+
f2c60e
+emac: ethernet@1c0b000 {
f2c60e
+	compatible = "allwinner,sun8i-h3-emac";
f2c60e
+	syscon = <&syscon>;
f2c60e
+	reg = <0x01c0b000 0x104>;
f2c60e
+	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
f2c60e
+	interrupt-names = "macirq";
f2c60e
+	resets = <&ccu RST_BUS_EMAC>;
f2c60e
+	reset-names = "stmmaceth";
f2c60e
+	clocks = <&ccu CLK_BUS_EMAC>;
f2c60e
+	clock-names = "stmmaceth";
f2c60e
+	#address-cells = <1>;
f2c60e
+	#size-cells = <0>;
f2c60e
+
f2c60e
+	phy-handle = <&int_mii_phy>;
f2c60e
+	phy-mode = "mii";
f2c60e
+	allwinner,leds-active-low;
f2c60e
+	mdio: mdio {
f2c60e
+		#address-cells = <1>;
f2c60e
+		#size-cells = <0>;
f2c60e
+		int_mii_phy: ethernet-phy@1 {
f2c60e
+			reg = <1>;
f2c60e
+			clocks = <&ccu CLK_BUS_EPHY>;
f2c60e
+			resets = <&ccu RST_BUS_EPHY>;
f2c60e
+		};
f2c60e
+	};
f2c60e
+};
f2c60e
-- 
f2c60e
2.14.3
f2c60e
f2c60e
From 227bc8c6bfad58c32c7a6c3bbc13d99eb6d266c0 Mon Sep 17 00:00:00 2001
f2c60e
From: Corentin LABBE <clabbe.montjoie@gmail.com>
f2c60e
Date: Tue, 31 Oct 2017 09:19:09 +0100
f2c60e
Subject: [PATCH 05/11] dt-bindings: net: dwmac-sun8i: update documentation
f2c60e
 about integrated PHY
f2c60e
f2c60e
This patch add documentation about the MDIO switch used on sun8i-h3-emac
f2c60e
for integrated PHY.
f2c60e
f2c60e
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
f2c60e
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
f2c60e
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
f2c60e
---
f2c60e
 .../devicetree/bindings/net/dwmac-sun8i.txt        | 147 +++++++++++++++++++--
f2c60e
 1 file changed, 135 insertions(+), 12 deletions(-)
f2c60e
f2c60e
diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
f2c60e
index 725f3b187886..3d6d5fa0c4d5 100644
f2c60e
--- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
f2c60e
+++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
f2c60e
@@ -4,18 +4,18 @@ This device is a platform glue layer for stmmac.
f2c60e
 Please see stmmac.txt for the other unchanged properties.
f2c60e
 
f2c60e
 Required properties:
f2c60e
-- compatible: should be one of the following string:
f2c60e
+- compatible: must be one of the following string:
f2c60e
 		"allwinner,sun8i-a83t-emac"
f2c60e
 		"allwinner,sun8i-h3-emac"
f2c60e
 		"allwinner,sun8i-v3s-emac"
f2c60e
 		"allwinner,sun50i-a64-emac"
f2c60e
 - reg: address and length of the register for the device.
f2c60e
 - interrupts: interrupt for the device
f2c60e
-- interrupt-names: should be "macirq"
f2c60e
+- interrupt-names: must be "macirq"
f2c60e
 - clocks: A phandle to the reference clock for this device
f2c60e
-- clock-names: should be "stmmaceth"
f2c60e
+- clock-names: must be "stmmaceth"
f2c60e
 - resets: A phandle to the reset control for this device
f2c60e
-- reset-names: should be "stmmaceth"
f2c60e
+- reset-names: must be "stmmaceth"
f2c60e
 - phy-mode: See ethernet.txt
f2c60e
 - phy-handle: See ethernet.txt
f2c60e
 - #address-cells: shall be 1
f2c60e
@@ -39,23 +39,42 @@ Optional properties for the following compatibles:
f2c60e
 - allwinner,leds-active-low: EPHY LEDs are active low
f2c60e
 
f2c60e
 Required child node of emac:
f2c60e
-- mdio bus node: should be named mdio
f2c60e
+- mdio bus node: should be named mdio with compatible "snps,dwmac-mdio"
f2c60e
 
f2c60e
 Required properties of the mdio node:
f2c60e
 - #address-cells: shall be 1
f2c60e
 - #size-cells: shall be 0
f2c60e
 
f2c60e
-The device node referenced by "phy" or "phy-handle" should be a child node
f2c60e
+The device node referenced by "phy" or "phy-handle" must be a child node
f2c60e
 of the mdio node. See phy.txt for the generic PHY bindings.
f2c60e
 
f2c60e
-Required properties of the phy node with the following compatibles:
f2c60e
+The following compatibles require that the emac node have a mdio-mux child
f2c60e
+node called "mdio-mux":
f2c60e
+  - "allwinner,sun8i-h3-emac"
f2c60e
+  - "allwinner,sun8i-v3s-emac":
f2c60e
+Required properties for the mdio-mux node:
f2c60e
+  - compatible = "allwinner,sun8i-h3-mdio-mux"
f2c60e
+  - mdio-parent-bus: a phandle to EMAC mdio
f2c60e
+  - one child mdio for the integrated mdio with the compatible
f2c60e
+    "allwinner,sun8i-h3-mdio-internal"
f2c60e
+  - one child mdio for the external mdio if present (V3s have none)
f2c60e
+Required properties for the mdio-mux children node:
f2c60e
+  - reg: 1 for internal MDIO bus, 2 for external MDIO bus
f2c60e
+
f2c60e
+The following compatibles require a PHY node representing the integrated
f2c60e
+PHY, under the integrated MDIO bus node if an mdio-mux node is used:
f2c60e
   - "allwinner,sun8i-h3-emac",
f2c60e
   - "allwinner,sun8i-v3s-emac":
f2c60e
+
f2c60e
+Additional information regarding generic multiplexer properties can be found
f2c60e
+at Documentation/devicetree/bindings/net/mdio-mux.txt
f2c60e
+
f2c60e
+Required properties of the integrated phy node:
f2c60e
 - clocks: a phandle to the reference clock for the EPHY
f2c60e
 - resets: a phandle to the reset control for the EPHY
f2c60e
+- Must be a child of the integrated mdio
f2c60e
 
f2c60e
-Example:
f2c60e
-
f2c60e
+Example with integrated PHY:
f2c60e
 emac: ethernet@1c0b000 {
f2c60e
 	compatible = "allwinner,sun8i-h3-emac";
f2c60e
 	syscon = <&syscon>;
f2c60e
@@ -72,13 +91,117 @@ emac: ethernet@1c0b000 {
f2c60e
 	phy-handle = <&int_mii_phy>;
f2c60e
 	phy-mode = "mii";
f2c60e
 	allwinner,leds-active-low;
f2c60e
+
f2c60e
+	mdio: mdio {
f2c60e
+		#address-cells = <1>;
f2c60e
+		#size-cells = <0>;
f2c60e
+		compatible = "snps,dwmac-mdio";
f2c60e
+	};
f2c60e
+
f2c60e
+	mdio-mux {
f2c60e
+		compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux";
f2c60e
+		#address-cells = <1>;
f2c60e
+		#size-cells = <0>;
f2c60e
+
f2c60e
+		mdio-parent-bus = <&mdio>;
f2c60e
+
f2c60e
+		int_mdio: mdio@1 {
f2c60e
+			compatible = "allwinner,sun8i-h3-mdio-internal";
f2c60e
+			reg = <1>;
f2c60e
+			#address-cells = <1>;
f2c60e
+			#size-cells = <0>;
f2c60e
+			int_mii_phy: ethernet-phy@1 {
f2c60e
+				reg = <1>;
f2c60e
+				clocks = <&ccu CLK_BUS_EPHY>;
f2c60e
+				resets = <&ccu RST_BUS_EPHY>;
f2c60e
+				phy-is-integrated;
f2c60e
+			};
f2c60e
+		};
f2c60e
+		ext_mdio: mdio@2 {
f2c60e
+			reg = <2>;
f2c60e
+			#address-cells = <1>;
f2c60e
+			#size-cells = <0>;
f2c60e
+		};
f2c60e
+	};
f2c60e
+};
f2c60e
+
f2c60e
+Example with external PHY:
f2c60e
+emac: ethernet@1c0b000 {
f2c60e
+	compatible = "allwinner,sun8i-h3-emac";
f2c60e
+	syscon = <&syscon>;
f2c60e
+	reg = <0x01c0b000 0x104>;
f2c60e
+	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
f2c60e
+	interrupt-names = "macirq";
f2c60e
+	resets = <&ccu RST_BUS_EMAC>;
f2c60e
+	reset-names = "stmmaceth";
f2c60e
+	clocks = <&ccu CLK_BUS_EMAC>;
f2c60e
+	clock-names = "stmmaceth";
f2c60e
+	#address-cells = <1>;
f2c60e
+	#size-cells = <0>;
f2c60e
+
f2c60e
+	phy-handle = <&ext_rgmii_phy>;
f2c60e
+	phy-mode = "rgmii";
f2c60e
+	allwinner,leds-active-low;
f2c60e
+
f2c60e
+	mdio: mdio {
f2c60e
+		#address-cells = <1>;
f2c60e
+		#size-cells = <0>;
f2c60e
+		compatible = "snps,dwmac-mdio";
f2c60e
+	};
f2c60e
+
f2c60e
+	mdio-mux {
f2c60e
+		compatible = "allwinner,sun8i-h3-mdio-mux";
f2c60e
+		#address-cells = <1>;
f2c60e
+		#size-cells = <0>;
f2c60e
+
f2c60e
+		mdio-parent-bus = <&mdio>;
f2c60e
+
f2c60e
+		int_mdio: mdio@1 {
f2c60e
+			compatible = "allwinner,sun8i-h3-mdio-internal";
f2c60e
+			reg = <1>;
f2c60e
+			#address-cells = <1>;
f2c60e
+			#size-cells = <0>;
f2c60e
+			int_mii_phy: ethernet-phy@1 {
f2c60e
+				reg = <1>;
f2c60e
+				clocks = <&ccu CLK_BUS_EPHY>;
f2c60e
+				resets = <&ccu RST_BUS_EPHY>;
f2c60e
+			};
f2c60e
+		};
f2c60e
+		ext_mdio: mdio@2 {
f2c60e
+			reg = <2>;
f2c60e
+			#address-cells = <1>;
f2c60e
+			#size-cells = <0>;
f2c60e
+			ext_rgmii_phy: ethernet-phy@1 {
f2c60e
+				reg = <1>;
f2c60e
+			};
f2c60e
+		}:
f2c60e
+	};
f2c60e
+};
f2c60e
+
f2c60e
+Example with SoC without integrated PHY
f2c60e
+
f2c60e
+emac: ethernet@1c0b000 {
f2c60e
+	compatible = "allwinner,sun8i-a83t-emac";
f2c60e
+	syscon = <&syscon>;
f2c60e
+	reg = <0x01c0b000 0x104>;
f2c60e
+	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
f2c60e
+	interrupt-names = "macirq";
f2c60e
+	resets = <&ccu RST_BUS_EMAC>;
f2c60e
+	reset-names = "stmmaceth";
f2c60e
+	clocks = <&ccu CLK_BUS_EMAC>;
f2c60e
+	clock-names = "stmmaceth";
f2c60e
+	#address-cells = <1>;
f2c60e
+	#size-cells = <0>;
f2c60e
+
f2c60e
+	phy-handle = <&ext_rgmii_phy>;
f2c60e
+	phy-mode = "rgmii";
f2c60e
+
f2c60e
 	mdio: mdio {
f2c60e
+		compatible = "snps,dwmac-mdio";
f2c60e
 		#address-cells = <1>;
f2c60e
 		#size-cells = <0>;
f2c60e
-		int_mii_phy: ethernet-phy@1 {
f2c60e
+		ext_rgmii_phy: ethernet-phy@1 {
f2c60e
 			reg = <1>;
f2c60e
-			clocks = <&ccu CLK_BUS_EPHY>;
f2c60e
-			resets = <&ccu RST_BUS_EPHY>;
f2c60e
 		};
f2c60e
 	};
f2c60e
 };
f2c60e
-- 
f2c60e
2.14.3
f2c60e
f2c60e
From 1de79efa35a1130c7a085f62b9d9b666d79b9a89 Mon Sep 17 00:00:00 2001
f2c60e
From: Peter Robinson <pbrobinson@gmail.com>
f2c60e
Date: Wed, 1 Nov 2017 14:04:20 +0000
f2c60e
Subject: [PATCH 06/11] arm: dts: sunxi: h3/h5: Restore EMAC changes
f2c60e
f2c60e
The original dwmac-sun8i DT bindings have some issue on how to handle
f2c60e
integrated PHY and was reverted in last RC of 4.13.
f2c60e
But now we have a solution so we need to get back that was reverted.
f2c60e
f2c60e
This patch restore sunxi-h3-h5.dtsi
f2c60e
This reverts partially commit fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes")
f2c60e
f2c60e
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
f2c60e
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
f2c60e
---
f2c60e
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 26 ++++++++++++++++++++++++++
f2c60e
 1 file changed, 26 insertions(+)
f2c60e
f2c60e
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
f2c60e
index 11240a8313c2..d38282b9e5d4 100644
f2c60e
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
f2c60e
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
f2c60e
@@ -391,6 +391,32 @@
f2c60e
 			clocks = <&osc24M>;
f2c60e
 		};
f2c60e
 
f2c60e
+		emac: ethernet@1c30000 {
f2c60e
+			compatible = "allwinner,sun8i-h3-emac";
f2c60e
+			syscon = <&syscon>;
f2c60e
+			reg = <0x01c30000 0x10000>;
f2c60e
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
f2c60e
+			interrupt-names = "macirq";
f2c60e
+			resets = <&ccu RST_BUS_EMAC>;
f2c60e
+			reset-names = "stmmaceth";
f2c60e
+			clocks = <&ccu CLK_BUS_EMAC>;
f2c60e
+			clock-names = "stmmaceth";
f2c60e
+			#address-cells = <1>;
f2c60e
+			#size-cells = <0>;
f2c60e
+			status = "disabled";
f2c60e
+
f2c60e
+			mdio: mdio {
f2c60e
+				#address-cells = <1>;
f2c60e
+				#size-cells = <0>;
f2c60e
+				int_mii_phy: ethernet-phy@1 {
f2c60e
+					compatible = "ethernet-phy-ieee802.3-c22";
f2c60e
+					reg = <1>;
f2c60e
+					clocks = <&ccu CLK_BUS_EPHY>;
f2c60e
+					resets = <&ccu RST_BUS_EPHY>;
f2c60e
+				};
f2c60e
+			};
f2c60e
+		};
f2c60e
+
f2c60e
 		spi0: spi@01c68000 {
f2c60e
 			compatible = "allwinner,sun8i-h3-spi";
f2c60e
 			reg = <0x01c68000 0x1000>;
f2c60e
-- 
f2c60e
2.14.3
f2c60e
f2c60e
From 65233cba93184e0efa8d94f907d65af947d197a1 Mon Sep 17 00:00:00 2001
f2c60e
From: Corentin LABBE <clabbe.montjoie@gmail.com>
f2c60e
Date: Tue, 31 Oct 2017 09:19:11 +0100
f2c60e
Subject: [PATCH 07/11] ARM: dts: sunxi: h3/h5: represent the mdio switch used
f2c60e
 by sun8i-h3-emac
f2c60e
f2c60e
Since dwmac-sun8i could use either an integrated PHY or an external PHY
f2c60e
(which could be at same MDIO address), we need to represent this selection
f2c60e
by a MDIO switch.
f2c60e
f2c60e
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
f2c60e
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
f2c60e
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
f2c60e
---
f2c60e
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 31 +++++++++++++++++++++++++++----
f2c60e
 1 file changed, 27 insertions(+), 4 deletions(-)
f2c60e
f2c60e
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
f2c60e
index d38282b9e5d4..2721b39c1875 100644
f2c60e
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
f2c60e
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
f2c60e
@@ -408,11 +408,34 @@
f2c60e
 			mdio: mdio {
f2c60e
 				#address-cells = <1>;
f2c60e
 				#size-cells = <0>;
f2c60e
-				int_mii_phy: ethernet-phy@1 {
f2c60e
-					compatible = "ethernet-phy-ieee802.3-c22";
f2c60e
+				compatible = "snps,dwmac-mdio";
f2c60e
+			};
f2c60e
+
f2c60e
+			mdio-mux {
f2c60e
+				compatible = "allwinner,sun8i-h3-mdio-mux";
f2c60e
+				#address-cells = <1>;
f2c60e
+				#size-cells = <0>;
f2c60e
+
f2c60e
+				mdio-parent-bus = <&mdio>;
f2c60e
+				/* Only one MDIO is usable at the time */
f2c60e
+				internal_mdio: mdio@1 {
f2c60e
+					compatible = "allwinner,sun8i-h3-mdio-internal";
f2c60e
 					reg = <1>;
f2c60e
-					clocks = <&ccu CLK_BUS_EPHY>;
f2c60e
-					resets = <&ccu RST_BUS_EPHY>;
f2c60e
+					#address-cells = <1>;
f2c60e
+					#size-cells = <0>;
f2c60e
+
f2c60e
+					int_mii_phy: ethernet-phy@1 {
f2c60e
+						compatible = "ethernet-phy-ieee802.3-c22";
f2c60e
+						reg = <1>;
f2c60e
+						clocks = <&ccu CLK_BUS_EPHY>;
f2c60e
+						resets = <&ccu RST_BUS_EPHY>;
f2c60e
+					};
f2c60e
+				};
f2c60e
+
f2c60e
+				external_mdio: mdio@2 {
f2c60e
+					reg = <2>;
f2c60e
+					#address-cells = <1>;
f2c60e
+					#size-cells = <0>;
f2c60e
 				};
f2c60e
 			};
f2c60e
 		};
f2c60e
-- 
f2c60e
2.14.3
f2c60e
f2c60e
From b705315d36dbe1b31062f30c987b3a502b437c85 Mon Sep 17 00:00:00 2001
f2c60e
From: Peter Robinson <pbrobinson@gmail.com>
f2c60e
Date: Wed, 1 Nov 2017 14:08:45 +0000
f2c60e
Subject: [PATCH 08/11] ARM: dts: sunxi: Restore EMAC changes (boards)
f2c60e
f2c60e
The original dwmac-sun8i DT bindings have some issue on how to handle
f2c60e
integrated PHY and was reverted in last RC of 4.13.
f2c60e
But now we have a solution so we need to get back that was reverted.
f2c60e
f2c60e
This patch restore all boards DT about dwmac-sun8i
f2c60e
This reverts partially commit fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes")
f2c60e
f2c60e
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
f2c60e
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
f2c60e
---
f2c60e
 arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts |  9 +++++++++
f2c60e
 arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts   | 19 +++++++++++++++++++
f2c60e
 arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts     | 19 +++++++++++++++++++
f2c60e
 arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts         |  7 +++++++
f2c60e
 arch/arm/boot/dts/sun8i-h3-orangepi-2.dts         |  8 ++++++++
f2c60e
 arch/arm/boot/dts/sun8i-h3-orangepi-one.dts       |  8 ++++++++
f2c60e
 arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts   |  5 +++++
f2c60e
 arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts        |  8 ++++++++
f2c60e
 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts      | 22 ++++++++++++++++++++++
f2c60e
 arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts    | 16 ++++++++++++++++
f2c60e
 10 files changed, 121 insertions(+)
f2c60e
f2c60e
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
f2c60e
index b1502df7b509..6713d0f2b3f4 100644
f2c60e
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
f2c60e
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
f2c60e
@@ -56,6 +56,8 @@
f2c60e
 
f2c60e
 	aliases {
f2c60e
 		serial0 = &uart;;
f2c60e
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
f2c60e
+		ethernet0 = &emac;
f2c60e
 		ethernet1 = &xr819;
f2c60e
 	};
f2c60e
 
f2c60e
@@ -102,6 +104,13 @@
f2c60e
 	status = "okay";
f2c60e
 };
f2c60e
 
f2c60e
+&emac {
f2c60e
+	phy-handle = <&int_mii_phy>;
f2c60e
+	phy-mode = "mii";
f2c60e
+	allwinner,leds-active-low;
f2c60e
+	status = "okay";
f2c60e
+};
f2c60e
+
f2c60e
 &mmc0 {
f2c60e
 	pinctrl-names = "default";
f2c60e
 	pinctrl-0 = <&mmc0_pins_a>;
f2c60e
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
f2c60e
index a337af1de322..3f95d806355b 100644
f2c60e
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
f2c60e
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
f2c60e
@@ -52,6 +52,7 @@
f2c60e
 	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
f2c60e
 
f2c60e
 	aliases {
f2c60e
+		ethernet0 = &emac;
f2c60e
 		serial0 = &uart;;
f2c60e
 		serial1 = &uart;;
f2c60e
 	};
f2c60e
@@ -114,6 +115,24 @@
f2c60e
 	status = "okay";
f2c60e
 };
f2c60e
 
f2c60e
+&emac {
f2c60e
+	pinctrl-names = "default";
f2c60e
+	pinctrl-0 = <&emac_rgmii_pins>;
f2c60e
+	phy-supply = <&reg_gmac_3v3>;
f2c60e
+	phy-handle = <&ext_rgmii_phy>;
f2c60e
+	phy-mode = "rgmii";
f2c60e
+
f2c60e
+	allwinner,leds-active-low;
f2c60e
+	status = "okay";
f2c60e
+};
f2c60e
+
f2c60e
+&external_mdio {
f2c60e
+	ext_rgmii_phy: ethernet-phy@1 {
f2c60e
+		compatible = "ethernet-phy-ieee802.3-c22";
f2c60e
+		reg = <0>;
f2c60e
+	};
f2c60e
+};
f2c60e
+
f2c60e
 &ir {
f2c60e
 	pinctrl-names = "default";
f2c60e
 	pinctrl-0 = <&ir_pins_a>;
f2c60e
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
f2c60e
index 8ddd1b2cc097..ef0371811296 100644
f2c60e
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
f2c60e
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
f2c60e
@@ -62,3 +62,22 @@
f2c60e
 &ohci2 {
f2c60e
 	status = "okay";
f2c60e
 };
f2c60e
+
f2c60e
+&emac {
f2c60e
+	pinctrl-names = "default";
f2c60e
+	pinctrl-0 = <&emac_rgmii_pins>;
f2c60e
+	phy-supply = <&reg_gmac_3v3>;
f2c60e
+	phy-handle = <&ext_rgmii_phy>;
f2c60e
+	phy-mode = "rgmii";
f2c60e
+
f2c60e
+	allwinner,leds-active-low;
f2c60e
+
f2c60e
+	status = "okay";
f2c60e
+};
f2c60e
+
f2c60e
+&external_mdio {
f2c60e
+	ext_rgmii_phy: ethernet-phy@1 {
f2c60e
+		compatible = "ethernet-phy-ieee802.3-c22";
f2c60e
+		reg = <7>;
f2c60e
+	};
f2c60e
+};
f2c60e
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
f2c60e
index 8d2cc6e9a03f..78f6c24952dd 100644
f2c60e
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
f2c60e
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
f2c60e
@@ -46,3 +46,10 @@
f2c60e
 	model = "FriendlyARM NanoPi NEO";
f2c60e
 	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
f2c60e
 };
f2c60e
+
f2c60e
+&emac {
f2c60e
+	phy-handle = <&int_mii_phy>;
f2c60e
+	phy-mode = "mii";
f2c60e
+	allwinner,leds-active-low;
f2c60e
+	status = "okay";
f2c60e
+};
f2c60e
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
f2c60e
index 8ff71b1bb45b..17cdeae19c6f 100644
f2c60e
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
f2c60e
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
f2c60e
@@ -54,6 +54,7 @@
f2c60e
 	aliases {
f2c60e
 		serial0 = &uart;;
f2c60e
 		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
f2c60e
+		ethernet0 = &emac;
f2c60e
 		ethernet1 = &rtl8189;
f2c60e
 	};
f2c60e
 
f2c60e
@@ -117,6 +118,13 @@
f2c60e
 	status = "okay";
f2c60e
 };
f2c60e
 
f2c60e
+&emac {
f2c60e
+	phy-handle = <&int_mii_phy>;
f2c60e
+	phy-mode = "mii";
f2c60e
+	allwinner,leds-active-low;
f2c60e
+	status = "okay";
f2c60e
+};
f2c60e
+
f2c60e
 &ir {
f2c60e
 	pinctrl-names = "default";
f2c60e
 	pinctrl-0 = <&ir_pins_a>;
f2c60e
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
f2c60e
index 5fea430e0eb1..6880268e8b87 100644
f2c60e
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
f2c60e
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
f2c60e
@@ -52,6 +52,7 @@
f2c60e
 	compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3";
f2c60e
 
f2c60e
 	aliases {
f2c60e
+		ethernet0 = &emac;
f2c60e
 		serial0 = &uart;;
f2c60e
 	};
f2c60e
 
f2c60e
@@ -97,6 +98,13 @@
f2c60e
 	status = "okay";
f2c60e
 };
f2c60e
 
f2c60e
+&emac {
f2c60e
+	phy-handle = <&int_mii_phy>;
f2c60e
+	phy-mode = "mii";
f2c60e
+	allwinner,leds-active-low;
f2c60e
+	status = "okay";
f2c60e
+};
f2c60e
+
f2c60e
 &mmc0 {
f2c60e
 	pinctrl-names = "default";
f2c60e
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
f2c60e
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
f2c60e
index 8b93f5c781a7..a10281b455f5 100644
f2c60e
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
f2c60e
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
f2c60e
@@ -53,6 +53,11 @@
f2c60e
 	};
f2c60e
 };
f2c60e
 
f2c60e
+&emac {
f2c60e
+	/* LEDs changed to active high on the plus */
f2c60e
+	/delete-property/ allwinner,leds-active-low;
f2c60e
+};
f2c60e
+
f2c60e
 &mmc1 {
f2c60e
 	pinctrl-names = "default";
f2c60e
 	pinctrl-0 = <&mmc1_pins_a>;
f2c60e
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
f2c60e
index 1a044b17d6c6..998b60f8d295 100644
f2c60e
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
f2c60e
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
f2c60e
@@ -52,6 +52,7 @@
f2c60e
 	compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
f2c60e
 
f2c60e
 	aliases {
f2c60e
+		ethernet0 = &emac;
f2c60e
 		serial0 = &uart;;
f2c60e
 	};
f2c60e
 
f2c60e
@@ -113,6 +114,13 @@
f2c60e
 	status = "okay";
f2c60e
 };
f2c60e
 
f2c60e
+&emac {
f2c60e
+	phy-handle = <&int_mii_phy>;
f2c60e
+	phy-mode = "mii";
f2c60e
+	allwinner,leds-active-low;
f2c60e
+	status = "okay";
f2c60e
+};
f2c60e
+
f2c60e
 &ir {
f2c60e
 	pinctrl-names = "default";
f2c60e
 	pinctrl-0 = <&ir_pins_a>;
f2c60e
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
f2c60e
index 828ae7a526d9..3002c025e187 100644
f2c60e
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
f2c60e
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
f2c60e
@@ -47,6 +47,10 @@
f2c60e
 	model = "Xunlong Orange Pi Plus / Plus 2";
f2c60e
 	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
f2c60e
 
f2c60e
+	aliases {
f2c60e
+		ethernet0 = &emac;
f2c60e
+	};
f2c60e
+
f2c60e
 	reg_gmac_3v3: gmac-3v3 {
f2c60e
 		compatible = "regulator-fixed";
f2c60e
 		regulator-name = "gmac-3v3";
f2c60e
@@ -74,6 +78,24 @@
f2c60e
 	status = "okay";
f2c60e
 };
f2c60e
 
f2c60e
+&emac {
f2c60e
+	pinctrl-names = "default";
f2c60e
+	pinctrl-0 = <&emac_rgmii_pins>;
f2c60e
+	phy-supply = <&reg_gmac_3v3>;
f2c60e
+	phy-handle = <&ext_rgmii_phy>;
f2c60e
+	phy-mode = "rgmii";
f2c60e
+
f2c60e
+	allwinner,leds-active-low;
f2c60e
+	status = "okay";
f2c60e
+};
f2c60e
+
f2c60e
+&external_mdio {
f2c60e
+	ext_rgmii_phy: ethernet-phy@1 {
f2c60e
+		compatible = "ethernet-phy-ieee802.3-c22";
f2c60e
+		reg = <0>;
f2c60e
+	};
f2c60e
+};
f2c60e
+
f2c60e
 &mmc2 {
f2c60e
 	pinctrl-names = "default";
f2c60e
 	pinctrl-0 = <&mmc2_8bit_pins>;
f2c60e
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
f2c60e
index 97920b12a944..6dbf7b2e0c13 100644
f2c60e
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
f2c60e
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
f2c60e
@@ -61,3 +61,19 @@
f2c60e
 		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
f2c60e
 	};
f2c60e
 };
f2c60e
+
f2c60e
+&emac {
f2c60e
+	pinctrl-names = "default";
f2c60e
+	pinctrl-0 = <&emac_rgmii_pins>;
f2c60e
+	phy-supply = <&reg_gmac_3v3>;
f2c60e
+	phy-handle = <&ext_rgmii_phy>;
f2c60e
+	phy-mode = "rgmii";
f2c60e
+	status = "okay";
f2c60e
+};
f2c60e
+
f2c60e
+&external_mdio {
f2c60e
+	ext_rgmii_phy: ethernet-phy@1 {
f2c60e
+		compatible = "ethernet-phy-ieee802.3-c22";
f2c60e
+		reg = <1>;
f2c60e
+	};
f2c60e
+};
f2c60e
-- 
f2c60e
2.14.3
f2c60e
f2c60e
From 516b88bfa40cf54732d2ba5e689fdf592a742ec3 Mon Sep 17 00:00:00 2001
f2c60e
From: Corentin LABBE <clabbe.montjoie@gmail.com>
f2c60e
Date: Tue, 31 Oct 2017 09:19:13 +0100
f2c60e
Subject: [PATCH 09/11] arm64: dts: allwinner: A64: Restore EMAC changes
f2c60e
f2c60e
The original dwmac-sun8i DT bindings have some issue on how to handle
f2c60e
integrated PHY and was reverted in last RC of 4.13.
f2c60e
But now we have a solution so we need to get back that was reverted.
f2c60e
f2c60e
This patch restore arm64 DT about dwmac-sun8i for A64
f2c60e
This reverts commit 87e1f5e8bb4b ("arm64: dts: allwinner: Revert EMAC changes")
f2c60e
f2c60e
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
f2c60e
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
f2c60e
---
f2c60e
 .../boot/dts/allwinner/sun50i-a64-bananapi-m64.dts   | 16 ++++++++++++++++
f2c60e
 .../boot/dts/allwinner/sun50i-a64-pine64-plus.dts    | 15 +++++++++++++++
f2c60e
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts  | 17 +++++++++++++++++
f2c60e
 .../dts/allwinner/sun50i-a64-sopine-baseboard.dts    | 16 ++++++++++++++++
f2c60e
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi        | 20 ++++++++++++++++++++
f2c60e
 5 files changed, 84 insertions(+)
f2c60e
f2c60e
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
f2c60e
index d347f52e27f6..45bdbfb96126 100644
f2c60e
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
f2c60e
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
f2c60e
@@ -51,6 +51,7 @@
f2c60e
 	compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
f2c60e
 
f2c60e
 	aliases {
f2c60e
+		ethernet0 = &emac;
f2c60e
 		serial0 = &uart;;
f2c60e
 		serial1 = &uart;;
f2c60e
 	};
f2c60e
@@ -69,6 +70,14 @@
f2c60e
 	status = "okay";
f2c60e
 };
f2c60e
 
f2c60e
+&emac {
f2c60e
+	pinctrl-names = "default";
f2c60e
+	pinctrl-0 = <&rgmii_pins>;
f2c60e
+	phy-mode = "rgmii";
f2c60e
+	phy-handle = <&ext_rgmii_phy>;
f2c60e
+	status = "okay";
f2c60e
+};
f2c60e
+
f2c60e
 &i2c1 {
f2c60e
 	pinctrl-names = "default";
f2c60e
 	pinctrl-0 = <&i2c1_pins>;
f2c60e
@@ -79,6 +88,13 @@
f2c60e
 	bias-pull-up;
f2c60e
 };
f2c60e
 
f2c60e
+&mdio {
f2c60e
+	ext_rgmii_phy: ethernet-phy@1 {
f2c60e
+		compatible = "ethernet-phy-ieee802.3-c22";
f2c60e
+		reg = <1>;
f2c60e
+	};
f2c60e
+};
f2c60e
+
f2c60e
 &mmc0 {
f2c60e
 	pinctrl-names = "default";
f2c60e
 	pinctrl-0 = <&mmc0_pins>;
f2c60e
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
f2c60e
index f82ccf332c0f..24f1aac366d6 100644
f2c60e
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
f2c60e
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
f2c60e
@@ -48,3 +48,18 @@
f2c60e
 
f2c60e
 	/* TODO: Camera, touchscreen, etc. */
f2c60e
 };
f2c60e
+
f2c60e
+&emac {
f2c60e
+	pinctrl-names = "default";
f2c60e
+	pinctrl-0 = <&rgmii_pins>;
f2c60e
+	phy-mode = "rgmii";
f2c60e
+	phy-handle = <&ext_rgmii_phy>;
f2c60e
+	status = "okay";
f2c60e
+};
f2c60e
+
f2c60e
+&mdio {
f2c60e
+	ext_rgmii_phy: ethernet-phy@1 {
f2c60e
+		compatible = "ethernet-phy-ieee802.3-c22";
f2c60e
+		reg = <1>;
f2c60e
+	};
f2c60e
+};
f2c60e
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
f2c60e
index d06e34b5d192..806442d3e846 100644
f2c60e
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
f2c60e
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
f2c60e
@@ -51,6 +51,7 @@
f2c60e
 	compatible = "pine64,pine64", "allwinner,sun50i-a64";
f2c60e
 
f2c60e
 	aliases {
f2c60e
+		ethernet0 = &emac;
f2c60e
 		serial0 = &uart;;
f2c60e
 		serial1 = &uart;;
f2c60e
 		serial2 = &uart;;
f2c60e
@@ -71,6 +72,15 @@
f2c60e
 	status = "okay";
f2c60e
 };
f2c60e
 
f2c60e
+&emac {
f2c60e
+	pinctrl-names = "default";
f2c60e
+	pinctrl-0 = <&rmii_pins>;
f2c60e
+	phy-mode = "rmii";
f2c60e
+	phy-handle = <&ext_rmii_phy1>;
f2c60e
+	status = "okay";
f2c60e
+
f2c60e
+};
f2c60e
+
f2c60e
 &i2c1 {
f2c60e
 	pinctrl-names = "default";
f2c60e
 	pinctrl-0 = <&i2c1_pins>;
f2c60e
@@ -81,6 +91,13 @@
f2c60e
 	bias-pull-up;
f2c60e
 };
f2c60e
 
f2c60e
+&mdio {
f2c60e
+	ext_rmii_phy1: ethernet-phy@1 {
f2c60e
+		compatible = "ethernet-phy-ieee802.3-c22";
f2c60e
+		reg = <1>;
f2c60e
+	};
f2c60e
+};
f2c60e
+
f2c60e
 &mmc0 {
f2c60e
 	pinctrl-names = "default";
f2c60e
 	pinctrl-0 = <&mmc0_pins>;
f2c60e
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
f2c60e
index 17ccc12b58df..0eb2acedf8c3 100644
f2c60e
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
f2c60e
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
f2c60e
@@ -53,6 +53,7 @@
f2c60e
 		     "allwinner,sun50i-a64";
f2c60e
 
f2c60e
 	aliases {
f2c60e
+		ethernet0 = &emac;
f2c60e
 		serial0 = &uart;;
f2c60e
 	};
f2c60e
 
f2c60e
@@ -76,6 +77,21 @@
f2c60e
 	status = "okay";
f2c60e
 };
f2c60e
 
f2c60e
+&emac {
f2c60e
+	pinctrl-names = "default";
f2c60e
+	pinctrl-0 = <&rgmii_pins>;
f2c60e
+	phy-mode = "rgmii";
f2c60e
+	phy-handle = <&ext_rgmii_phy>;
f2c60e
+	status = "okay";
f2c60e
+};
f2c60e
+
f2c60e
+&mdio {
f2c60e
+	ext_rgmii_phy: ethernet-phy@1 {
f2c60e
+		compatible = "ethernet-phy-ieee802.3-c22";
f2c60e
+		reg = <1>;
f2c60e
+	};
f2c60e
+};
f2c60e
+
f2c60e
 &mmc2 {
f2c60e
 	pinctrl-names = "default";
f2c60e
 	pinctrl-0 = <&mmc2_pins>;
f2c60e
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
f2c60e
index 8c8db1b057df..50f17bab0c07 100644
f2c60e
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
f2c60e
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
f2c60e
@@ -449,6 +449,26 @@
f2c60e
 			#size-cells = <0>;
f2c60e
 		};
f2c60e
 
f2c60e
+		emac: ethernet@1c30000 {
f2c60e
+			compatible = "allwinner,sun50i-a64-emac";
f2c60e
+			syscon = <&syscon>;
f2c60e
+			reg = <0x01c30000 0x10000>;
f2c60e
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
f2c60e
+			interrupt-names = "macirq";
f2c60e
+			resets = <&ccu RST_BUS_EMAC>;
f2c60e
+			reset-names = "stmmaceth";
f2c60e
+			clocks = <&ccu CLK_BUS_EMAC>;
f2c60e
+			clock-names = "stmmaceth";
f2c60e
+			status = "disabled";
f2c60e
+			#address-cells = <1>;
f2c60e
+			#size-cells = <0>;
f2c60e
+
f2c60e
+			mdio: mdio {
f2c60e
+				#address-cells = <1>;
f2c60e
+				#size-cells = <0>;
f2c60e
+			};
f2c60e
+		};
f2c60e
+
f2c60e
 		gic: interrupt-controller@1c81000 {
f2c60e
 			compatible = "arm,gic-400";
f2c60e
 			reg = <0x01c81000 0x1000>,
f2c60e
-- 
f2c60e
2.14.3
f2c60e
f2c60e
From 070173449eb88e9cf9c91889c77f53616911f4d0 Mon Sep 17 00:00:00 2001
f2c60e
From: Corentin LABBE <clabbe.montjoie@gmail.com>
f2c60e
Date: Tue, 31 Oct 2017 09:19:14 +0100
f2c60e
Subject: [PATCH 10/11] arm64: dts: allwinner: H5: Restore EMAC changes
f2c60e
f2c60e
The original dwmac-sun8i DT bindings have some issue on how to handle
f2c60e
integrated PHY and was reverted in last RC of 4.13.
f2c60e
But now we have a solution so we need to get back that was reverted.
f2c60e
f2c60e
This patch restore arm64 DT about dwmac-sun8i for H5
f2c60e
This reverts a part of commit 87e1f5e8bb4b ("arm64: dts: allwinner: Revert EMAC changes")
f2c60e
f2c60e
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
f2c60e
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
f2c60e
---
f2c60e
 arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts | 17 +++++++++++++++++
f2c60e
 .../arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts | 17 +++++++++++++++++
f2c60e
 .../boot/dts/allwinner/sun50i-h5-orangepi-prime.dts     | 17 +++++++++++++++++
f2c60e
 3 files changed, 51 insertions(+)
f2c60e
f2c60e
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
f2c60e
index 1c2387bd5df6..6eb8092d8e57 100644
f2c60e
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
f2c60e
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
f2c60e
@@ -50,6 +50,7 @@
f2c60e
 	compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
f2c60e
 
f2c60e
 	aliases {
f2c60e
+		ethernet0 = &emac;
f2c60e
 		serial0 = &uart;;
f2c60e
 	};
f2c60e
 
f2c60e
@@ -108,6 +109,22 @@
f2c60e
 	status = "okay";
f2c60e
 };
f2c60e
 
f2c60e
+&emac {
f2c60e
+	pinctrl-names = "default";
f2c60e
+	pinctrl-0 = <&emac_rgmii_pins>;
f2c60e
+	phy-supply = <&reg_gmac_3v3>;
f2c60e
+	phy-handle = <&ext_rgmii_phy>;
f2c60e
+	phy-mode = "rgmii";
f2c60e
+	status = "okay";
f2c60e
+};
f2c60e
+
f2c60e
+&external_mdio {
f2c60e
+	ext_rgmii_phy: ethernet-phy@7 {
f2c60e
+		compatible = "ethernet-phy-ieee802.3-c22";
f2c60e
+		reg = <7>;
f2c60e
+	};
f2c60e
+};
f2c60e
+
f2c60e
 &mmc0 {
f2c60e
 	pinctrl-names = "default";
f2c60e
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
f2c60e
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
f2c60e
index 4f77c8470f6c..a0ca925175aa 100644
f2c60e
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
f2c60e
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
f2c60e
@@ -59,6 +59,7 @@
f2c60e
 	};
f2c60e
 
f2c60e
 	aliases {
f2c60e
+		ethernet0 = &emac;
f2c60e
 		serial0 = &uart;;
f2c60e
 	};
f2c60e
 
f2c60e
@@ -136,6 +137,22 @@
f2c60e
 	status = "okay";
f2c60e
 };
f2c60e
 
f2c60e
+&emac {
f2c60e
+	pinctrl-names = "default";
f2c60e
+	pinctrl-0 = <&emac_rgmii_pins>;
f2c60e
+	phy-supply = <&reg_gmac_3v3>;
f2c60e
+	phy-handle = <&ext_rgmii_phy>;
f2c60e
+	phy-mode = "rgmii";
f2c60e
+	status = "okay";
f2c60e
+};
f2c60e
+
f2c60e
+&external_mdio {
f2c60e
+	ext_rgmii_phy: ethernet-phy@1 {
f2c60e
+		compatible = "ethernet-phy-ieee802.3-c22";
f2c60e
+		reg = <1>;
f2c60e
+	};
f2c60e
+};
f2c60e
+
f2c60e
 &ir {
f2c60e
 	pinctrl-names = "default";
f2c60e
 	pinctrl-0 = <&ir_pins_a>;
f2c60e
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
f2c60e
index 6be06873e5af..b47790650144 100644
f2c60e
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
f2c60e
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
f2c60e
@@ -54,6 +54,7 @@
f2c60e
 	compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
f2c60e
 
f2c60e
 	aliases {
f2c60e
+		ethernet0 = &emac;
f2c60e
 		serial0 = &uart;;
f2c60e
 	};
f2c60e
 
f2c60e
@@ -143,6 +144,22 @@
f2c60e
 	status = "okay";
f2c60e
 };
f2c60e
 
f2c60e
+&emac {
f2c60e
+	pinctrl-names = "default";
f2c60e
+	pinctrl-0 = <&emac_rgmii_pins>;
f2c60e
+	phy-supply = <&reg_gmac_3v3>;
f2c60e
+	phy-handle = <&ext_rgmii_phy>;
f2c60e
+	phy-mode = "rgmii";
f2c60e
+	status = "okay";
f2c60e
+};
f2c60e
+
f2c60e
+&external_mdio {
f2c60e
+	ext_rgmii_phy: ethernet-phy@1 {
f2c60e
+		compatible = "ethernet-phy-ieee802.3-c22";
f2c60e
+		reg = <1>;
f2c60e
+	};
f2c60e
+};
f2c60e
+
f2c60e
 &ir {
f2c60e
 	pinctrl-names = "default";
f2c60e
 	pinctrl-0 = <&ir_pins_a>;
f2c60e
-- 
f2c60e
2.14.3
f2c60e
f2c60e
From 63118a9f7808a0a67c23e7d276138c996e094eae Mon Sep 17 00:00:00 2001
f2c60e
From: Corentin LABBE <clabbe.montjoie@gmail.com>
f2c60e
Date: Tue, 31 Oct 2017 09:19:15 +0100
f2c60e
Subject: [PATCH 11/11] arm64: dts: allwinner: add snps, dwmac-mdio compatible
f2c60e
 to emac/mdio
f2c60e
f2c60e
stmmac bindings docs said that its mdio node must have
f2c60e
compatible = "snps,dwmac-mdio";
f2c60e
Since dwmac-sun8i does not have any good reasons to not doing it, all
f2c60e
their MDIO node must have it.
f2c60e
f2c60e
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
f2c60e
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
f2c60e
---
f2c60e
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 +
f2c60e
 1 file changed, 1 insertion(+)
f2c60e
f2c60e
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
f2c60e
index 50f17bab0c07..8fd75c95937a 100644
f2c60e
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
f2c60e
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
f2c60e
@@ -464,6 +464,7 @@
f2c60e
 			#size-cells = <0>;
f2c60e
 
f2c60e
 			mdio: mdio {
f2c60e
+				compatible = "snps,dwmac-mdio";
f2c60e
 				#address-cells = <1>;
f2c60e
 				#size-cells = <0>;
f2c60e
 			};
f2c60e
-- 
f2c60e
2.14.3
f2c60e
f2c60e
From patchwork Fri Nov 10 09:26:54 2017
f2c60e
Content-Type: text/plain; charset="utf-8"
f2c60e
MIME-Version: 1.0
f2c60e
Content-Transfer-Encoding: 7bit
f2c60e
Subject: arm64: allwinner: a64: add Ethernet PHY regulator for several boards
f2c60e
From: Icenowy Zheng <icenowy@aosc.io>
f2c60e
X-Patchwork-Id: 10052659
f2c60e
Message-Id: <20171110092654.10746-1-icenowy@aosc.io>
f2c60e
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
f2c60e
 Chen-Yu Tsai <wens@csie.org>
f2c60e
Cc: linux-sunxi@googlegroups.com, linux-kernel@vger.kernel.org,
f2c60e
 linux-arm-kernel@lists.infradead.org, Icenowy Zheng <icenowy@aosc.io>
f2c60e
Date: Fri, 10 Nov 2017 17:26:54 +0800
f2c60e
f2c60e
On several A64 boards the Ethernet PHY is powered by the DC1SW regulator
f2c60e
on the AXP803 PMIC.
f2c60e
f2c60e
Add phy-handle property to these boards' emac node.
f2c60e
f2c60e
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
f2c60e
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
f2c60e
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
f2c60e
---
f2c60e
 arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts     | 1 +
f2c60e
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts           | 1 +
f2c60e
 arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts | 1 +
f2c60e
 3 files changed, 3 insertions(+)
f2c60e
f2c60e
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
f2c60e
index 45bdbfb96126..4a8d3f83a36e 100644
f2c60e
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
f2c60e
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
f2c60e
@@ -75,6 +75,7 @@
f2c60e
 	pinctrl-0 = <&rgmii_pins>;
f2c60e
 	phy-mode = "rgmii";
f2c60e
 	phy-handle = <&ext_rgmii_phy>;
f2c60e
+	phy-supply = <&reg_dc1sw>;
f2c60e
 	status = "okay";
f2c60e
 };
f2c60e
 
f2c60e
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
f2c60e
index 806442d3e846..604cdaedac38 100644
f2c60e
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
f2c60e
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
f2c60e
@@ -77,6 +77,7 @@
f2c60e
 	pinctrl-0 = <&rmii_pins>;
f2c60e
 	phy-mode = "rmii";
f2c60e
 	phy-handle = <&ext_rmii_phy1>;
f2c60e
+	phy-supply = <&reg_dc1sw>;
f2c60e
 	status = "okay";
f2c60e
 
f2c60e
 };
f2c60e
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
f2c60e
index 0eb2acedf8c3..a053a6ac5267 100644
f2c60e
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
f2c60e
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
f2c60e
@@ -82,6 +82,7 @@
f2c60e
 	pinctrl-0 = <&rgmii_pins>;
f2c60e
 	phy-mode = "rgmii";
f2c60e
 	phy-handle = <&ext_rgmii_phy>;
f2c60e
+	phy-supply = <&reg_dc1sw>;
f2c60e
 	status = "okay";
f2c60e
 };
f2c60e
 
f2c60e
From 79e7d6c8bfe67fce8c8fe4953e74ce7f420dd732 Mon Sep 17 00:00:00 2001
f2c60e
From: Peter Robinson <pbrobinson@gmail.com>
f2c60e
Date: Tue, 21 Nov 2017 15:43:19 +0000
f2c60e
Subject: [PATCH] ARM: dts: sunxi: sun8i-h3-nanopi-m1-plus: Add missing
f2c60e
 regulator
f2c60e
f2c60e
This patch add the missing regulator for sun8i-h3-nanopi-m1-plus.
f2c60e
f2c60e
Fixes: ("ARM: dts: sunxi: Restore EMAC changes (boards)")
f2c60e
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
f2c60e
---
f2c60e
 arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 11 +++++++++++
f2c60e
 1 file changed, 11 insertions(+)
f2c60e
f2c60e
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
f2c60e
index ef0371811296..738ef1d9e844 100644
f2c60e
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
f2c60e
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
f2c60e
@@ -45,6 +45,17 @@
f2c60e
 / {
f2c60e
 	model = "FriendlyArm NanoPi M1 Plus";
f2c60e
 	compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3";
f2c60e
+
f2c60e
+        reg_gmac_3v3: gmac-3v3 {
f2c60e
+                compatible = "regulator-fixed";
f2c60e
+                regulator-name = "gmac-3v3";
f2c60e
+                regulator-min-microvolt = <3300000>;
f2c60e
+                regulator-max-microvolt = <3300000>;
f2c60e
+                startup-delay-us = <100000>;
f2c60e
+                enable-active-high;
f2c60e
+                gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
f2c60e
+        };
f2c60e
+
f2c60e
 };
f2c60e
 
f2c60e
 &ehci1 {
f2c60e
-- 
f2c60e
2.14.3
f2c60e
f2c60e
From 4497478c60c04d2bf37082e27fc98f4f835db96b Mon Sep 17 00:00:00 2001
f2c60e
From: Niklas Cassel <niklas.cassel@axis.com>
f2c60e
Date: Tue, 14 Nov 2017 11:15:54 +0100
f2c60e
Subject: net: stmmac: fix LPI transitioning for dwmac4
f2c60e
f2c60e
The LPI transitioning logic in stmmac_main uses
f2c60e
priv->tx_path_in_lpi_mode to enter/exit LPI.
f2c60e
f2c60e
However, priv->tx_path_in_lpi_mode is assigned
f2c60e
using the return value from host_irq_status().
f2c60e
f2c60e
So for dwmac4, priv->tx_path_in_lpi_mode was always false,
f2c60e
so stmmac_tx_clean() would always try to put us in eee mode,
f2c60e
and stmmac_xmit() would never take us out of eee mode.
f2c60e
f2c60e
To fix this, make host_irq_status() read and return the LPI
f2c60e
irq status also for dwmac4.
f2c60e
f2c60e
This also increments the existing LPI counters, so that
f2c60e
ethtool --statistics shows LPI transitions also for dwmac4.
f2c60e
f2c60e
For dwmac1000, irqs are enabled/disabled using the register
f2c60e
named "Interrupt Mask Register", and thus setting a bit disables
f2c60e
that specific irq.
f2c60e
f2c60e
For dwmac4 the matching register is named "MAC_Interrupt_Enable",
f2c60e
and thus setting a bit enables that specific irq.
f2c60e
f2c60e
Looking at dwmac1000_core.c, the irqs that are always enabled are:
f2c60e
LPI and PMT.
f2c60e
f2c60e
Looking at dwmac4_core.c, the irqs that are always enabled are:
f2c60e
PMT.
f2c60e
f2c60e
To be able to read the LPI irq status, we need to enable the LPI
f2c60e
irq also for dwmac4.
f2c60e
f2c60e
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
f2c60e
Signed-off-by: David S. Miller <davem@davemloft.net>
f2c60e
---
f2c60e
 drivers/net/ethernet/stmicro/stmmac/dwmac4.h      |  7 ++++++-
f2c60e
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 19 +++++++++++++++++++
f2c60e
 2 files changed, 25 insertions(+), 1 deletion(-)
f2c60e
f2c60e
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
f2c60e
index aeda3ab..789dad8 100644
f2c60e
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
f2c60e
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
f2c60e
@@ -98,7 +98,7 @@
f2c60e
 #define	GMAC_PCS_IRQ_DEFAULT	(GMAC_INT_RGSMIIS | GMAC_INT_PCS_LINK |	\
f2c60e
 				 GMAC_INT_PCS_ANE)
f2c60e
 
f2c60e
-#define	GMAC_INT_DEFAULT_MASK	GMAC_INT_PMT_EN
f2c60e
+#define	GMAC_INT_DEFAULT_MASK	(GMAC_INT_PMT_EN | GMAC_INT_LPI_EN)
f2c60e
 
f2c60e
 enum dwmac4_irq_status {
f2c60e
 	time_stamp_irq = 0x00001000,
f2c60e
@@ -106,6 +106,7 @@ enum dwmac4_irq_status {
f2c60e
 	mmc_tx_irq = 0x00000400,
f2c60e
 	mmc_rx_irq = 0x00000200,
f2c60e
 	mmc_irq = 0x00000100,
f2c60e
+	lpi_irq = 0x00000020,
f2c60e
 	pmt_irq = 0x00000010,
f2c60e
 };
f2c60e
 
f2c60e
@@ -132,6 +133,10 @@ enum power_event {
f2c60e
 #define GMAC4_LPI_CTRL_STATUS_LPITXA	BIT(19)	/* Enable LPI TX Automate */
f2c60e
 #define GMAC4_LPI_CTRL_STATUS_PLS	BIT(17) /* PHY Link Status */
f2c60e
 #define GMAC4_LPI_CTRL_STATUS_LPIEN	BIT(16)	/* LPI Enable */
f2c60e
+#define GMAC4_LPI_CTRL_STATUS_RLPIEX	BIT(3) /* Receive LPI Exit */
f2c60e
+#define GMAC4_LPI_CTRL_STATUS_RLPIEN	BIT(2) /* Receive LPI Entry */
f2c60e
+#define GMAC4_LPI_CTRL_STATUS_TLPIEX	BIT(1) /* Transmit LPI Exit */
f2c60e
+#define GMAC4_LPI_CTRL_STATUS_TLPIEN	BIT(0) /* Transmit LPI Entry */
f2c60e
 
f2c60e
 /* MAC Debug bitmap */
f2c60e
 #define GMAC_DEBUG_TFCSTS_MASK		GENMASK(18, 17)
f2c60e
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
f2c60e
index 2f7d7ec..f3ed8f7 100644
f2c60e
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
f2c60e
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
f2c60e
@@ -580,6 +580,25 @@ static int dwmac4_irq_status(struct mac_device_info *hw,
f2c60e
 		x->irq_receive_pmt_irq_n++;
f2c60e
 	}
f2c60e
 
f2c60e
+	/* MAC tx/rx EEE LPI entry/exit interrupts */
f2c60e
+	if (intr_status & lpi_irq) {
f2c60e
+		/* Clear LPI interrupt by reading MAC_LPI_Control_Status */
f2c60e
+		u32 status = readl(ioaddr + GMAC4_LPI_CTRL_STATUS);
f2c60e
+
f2c60e
+		if (status & GMAC4_LPI_CTRL_STATUS_TLPIEN) {
f2c60e
+			ret |= CORE_IRQ_TX_PATH_IN_LPI_MODE;
f2c60e
+			x->irq_tx_path_in_lpi_mode_n++;
f2c60e
+		}
f2c60e
+		if (status & GMAC4_LPI_CTRL_STATUS_TLPIEX) {
f2c60e
+			ret |= CORE_IRQ_TX_PATH_EXIT_LPI_MODE;
f2c60e
+			x->irq_tx_path_exit_lpi_mode_n++;
f2c60e
+		}
f2c60e
+		if (status & GMAC4_LPI_CTRL_STATUS_RLPIEN)
f2c60e
+			x->irq_rx_path_in_lpi_mode_n++;
f2c60e
+		if (status & GMAC4_LPI_CTRL_STATUS_RLPIEX)
f2c60e
+			x->irq_rx_path_exit_lpi_mode_n++;
f2c60e
+	}
f2c60e
+
f2c60e
 	dwmac_pcs_isr(ioaddr, GMAC_PCS_BASE, intr_status, x);
f2c60e
 	if (intr_status & PCS_RGSMIIIS_IRQ)
f2c60e
 		dwmac4_phystatus(ioaddr, x);
f2c60e
-- 
f2c60e
cgit v1.1
f2c60e
f2c60e
From 1c08ac0c4bd8e9d66c4dde29bc496c3b430dd028 Mon Sep 17 00:00:00 2001
f2c60e
From: Corentin Labbe <clabbe.montjoie@gmail.com>
f2c60e
Date: Tue, 28 Nov 2017 17:48:22 +0100
f2c60e
Subject: net: stmmac: dwmac-sun8i: fix allwinner,leds-active-low handling
f2c60e
f2c60e
The driver expect "allwinner,leds-active-low" to be in PHY node, but
f2c60e
the binding doc expect it to be in MAC node.
f2c60e
f2c60e
Since all board DT use it also in MAC node, the driver need to search
f2c60e
allwinner,leds-active-low in MAC node.
f2c60e
f2c60e
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
f2c60e
Signed-off-by: David S. Miller <davem@davemloft.net>
f2c60e
---
f2c60e
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 3 +--
f2c60e
 1 file changed, 1 insertion(+), 2 deletions(-)
f2c60e
f2c60e
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
f2c60e
index e5ff734..9eb7f65 100644
f2c60e
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
f2c60e
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
f2c60e
@@ -808,8 +808,7 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
f2c60e
 			 val, reg);
f2c60e
 
f2c60e
 	if (gmac->variant->soc_has_internal_phy) {
f2c60e
-		if (of_property_read_bool(priv->plat->phy_node,
f2c60e
-					  "allwinner,leds-active-low"))
f2c60e
+		if (of_property_read_bool(node, "allwinner,leds-active-low"))
f2c60e
 			reg |= H3_EPHY_LED_POL;
f2c60e
 		else
f2c60e
 			reg &= ~H3_EPHY_LED_POL;
f2c60e
-- 
f2c60e
cgit v1.1
f2c60e