From 3d4a62b7ebe849d466b01d723fee78c936ad3888 Mon Sep 17 00:00:00 2001
From: Alain Reguera Delgado <alain.reguera@gmail.com>
Date: Oct 05 2011 04:21:35 +0000
Subject: Update `Configurations/Dialup/client.docbook'.


---

diff --git a/Manuals/Tcpi-ug/Configurations/Dialup/client.docbook b/Manuals/Tcpi-ug/Configurations/Dialup/client.docbook
index 7c793dd..adf6d52 100644
--- a/Manuals/Tcpi-ug/Configurations/Dialup/client.docbook
+++ b/Manuals/Tcpi-ug/Configurations/Dialup/client.docbook
@@ -11,12 +11,87 @@
 
     <sect2 id="configurations-dialup-client-config">
     <title>Configuring Client Computer</title>
+
+    <para>
+        ...
+    </para>
+
+    <sect3 id="configurations-dialup-client-config-conn">
+    <title>Establishing Dial-Up Connection</title>
+
+    <para>
+        To establish connection from the client computer to the server
+        computer you should configure the client computer to dial-up
+        the server computer, using the following information:
+    </para>
+
+<screen>
+ ISP Name: server.example.com
+ISP Phone: +53043515094
+ Username: client.example.com
+ Password: mail4u
+</screen>
+
+    <para>
+        To estabalish a dial-up connection from the client computer to
+        the server computer, you need to determine the modem location
+        assigned by the operating system, so you can instruct
+        applications like <command>system-config-network</command> the
+        correct device they will to talk to. This configuration
+        process has been greatly simplified by the
+        <command>wvdialconf</command> command distributed with the
+        <package>wvdial</package>
+        package. To do this, run the following command and pay
+        attention to the three last lines of its output:
+    </para>
+
+    <screen>wvdialconf /etc/wvdial.conf</screen>
+
+<screen>
+Scanning your serial ports for a modem.
+
+ttyS0&lt;*1&gt;: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
+ttyS0&lt;*1&gt;: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
+ttyS0&lt;*1&gt;: ATQ0 V1 E1 -- and failed too at 115200, giving up.
+Port Scan&lt;*1&gt;: S1   S2   S3   
+WvModem&lt;*1&gt;: Cannot get information for serial port.
+ttyACM0&lt;*1&gt;: ATQ0 V1 E1 -- OK
+ttyACM0&lt;*1&gt;: ATQ0 V1 E1 Z -- OK
+ttyACM0&lt;*1&gt;: ATQ0 V1 E1 S0=0 -- OK
+ttyACM0&lt;*1&gt;: ATQ0 V1 E1 S0=0 &amp;C1 -- OK
+ttyACM0&lt;*1&gt;: ATQ0 V1 E1 S0=0 &amp;C1 &amp;D2 -- OK
+ttyACM0&lt;*1&gt;: ATQ0 V1 E1 S0=0 &amp;C1 &amp;D2 +FCLASS=0 -- OK
+ttyACM0&lt;*1&gt;: Modem Identifier: ATI -- LT V.90 1.0 MT5634ZBA-USB
+Data/Fax Modem (Dual Config) Version 5.18e
+ttyACM0&lt;*1&gt;: Speed 4800: AT -- OK
+ttyACM0&lt;*1&gt;: Speed 9600: AT -- OK
+ttyACM0&lt;*1&gt;: Speed 19200: AT -- OK
+ttyACM0&lt;*1&gt;: Speed 38400: AT -- OK
+ttyACM0&lt;*1&gt;: Speed 57600: AT -- OK
+ttyACM0&lt;*1&gt;: Speed 115200: AT -- OK
+ttyACM0&lt;*1&gt;: Speed 230400: AT -- OK
+ttyACM0&lt;*1&gt;: Speed 460800: AT -- OK
+ttyACM0&lt;*1&gt;: Max speed is 460800; that should be safe.
+ttyACM0&lt;*1&gt;: ATQ0 V1 E1 S0=0 &amp;C1 &amp;D2 +FCLASS=0 -- OK
+
+Found an USB modem on /dev/ttyACM0.
+Modem configuration written to /etc/wvdial.conf.
+ttyACM0&lt;Info&gt;: Speed 460800; init "ATQ0 V1 E1 S0=0 &amp;C1 &amp;D2 +FCLASS=0"
+</screen>
+
     <para>
-        In order for you to reach the web interface that let you get
-        registered into the ISP, you need to configure a
-        point-to-point connection in your workstation using the
-        following information:
+        Now, using this information, configure a Modem connection
+        using the interface provided by
+        <command>system-config-network</command> command. Take care of
+        replacing the <filename>/dev/modem</filename> device name by
+        that one found by <command>wvdialconf</command> (e.g., in the
+        output above would be <filename>/dev/ttyACM0</filename>). At
+        this point, you can use the button Activate from
+        <command>system-config-network</command> to establish the
+        Modem connection you previously configured.
     </para>
+ 
+    </sect3>
     </sect2>
 
 </sect1>