<sect1 id="scripts-bash-prepare">

    <title>Standardizing Configuration Tasks</title>

    <para>

        The <function>prepare</function> functionality is the

        interface the <command>centos-art.sh</command> script provides

        to standardize the final configuration stuff your workstation

        needs, once the working copy of &TCAR; has been downloaded

        inside it already.

    </para>

    <para>

        Assuming this is the very first time you run the

        <command>centos-art.sh</command> script, you'll find that

        it isn't found in your workstation.  This is correct because

        you haven't created the symbolic link that make it available

        in the execution path, yet. In order to make the

        <command>centos-art.sh</command> script available in the

        execution path of your workstation, you need to run it using

        its absolute path first:

    </para>

    <screen>~/Projects/artwork/trunk/Scripts/Bash/centos-art.sh prepare [OPTIONS]</screen>

    <para>

        Later, once the <command>centos-art.sh</command> script is

        available in the execution path of your system, there is no

        need for you to use the absolute path again.  From this time

        on, you can use the <command>centos-art</command> command-line

        interface directly, as the following example describes:

    </para>

    <screen>centos-art prepare [OPTIONS]</screen>

    <para>

        The <function>prepare</function> functionality accepts the

        following options: 

    </para>

    <variablelist>

    <varlistentry>

    <term><option>--quiet</option></term>

    <listitem>

    <para>

        Supress all output messages except error messages.  When this

        option is passed, all confirmation requests are supressed and

        a possitive answer is assumed for them, just as if the

        <option>--answer-yes</option> option whould have been provided.

    </para>

    </listitem>

    </varlistentry>

    <varlistentry>

    <term><option>--answer-yes</option></term>

    <listitem>

    <para>

       Assume <emphasis>yes</emphasis> to all confirmation requests.

    </para>

    </listitem>

    </varlistentry>

    <varlistentry>

    <term><option>--packages</option></term>

    <listitem>

    <para>

        This option verifies packeges required by

        <command>centos-art.sh</command> script. installs or updates

        required packages. When required packages aren't installed,

        this option uses <command>sudo yum install</command>

        command to perform the installation task. When required

        packages are installed, this option uses <command>sudo yum

        update</command> to update them, if there is any related

        actualization to be applied on. In both cases, it is required

        that you configure the <command>sudo</command> command first.

    </para>

    </listitem>

    </varlistentry>

    <varlistentry>

    <term><option>--links</option></term>

    <listitem>

    <para>

        This option maintains the file relation between your working

        copy and configuration files inside your workstation through

        symbolic links. When you provide this option, the

        <command>centos-art.sh</command> puts itself into your

        system's execution path through its command line interface

        <command>centos-art</command> and makes common brushes,

        patterns, palettes and fonts inside the working copy,

        available to applications like GIMP in order for you to make

        use of them without loosing version control over them.

    </para>

    <caution>

    <para>

        This option removes all common fonts, brushes, patterns, and

        palettes currently installed in your home directory, in order

        to create a fresh installation of them all again, using the

        working copy as reference.

    </para>

    </caution>

    </listitem>

    </varlistentry>

    <varlistentry>

    <term><option>--images</option></term>

    <listitem>

    <para>

        This option initializes image files inside the working copy.

        When you provide this option, the

        <command>centos-art.sh</command> scripts renders image files

        from all design models available in the working copy. This

        step is required in order to satisfy file dependencies among

        different components inside the working copy.

    </para>

    </listitem>

    </varlistentry>

    <varlistentry>

    <term><option>--manuals</option></term>

    <listitem>

    <para>

       This option initializes documentation files inside the working

       copy. When you provide this option, the

       <command>centos-art.sh</command> script renders all

       documentation manuals from their related source files to

       different output formats, so you can read them nicely.

    </para>

    </listitem>

    </varlistentry>

    <varlistentry>

    <term><option>--environment</option></term>

    <listitem>

    <para>

       Print the name and value of some of the environment variables

       used by <command>centos-art.sh</command> scripts as described

       in <xref linkend="scripts-bash-prepare-envar" />.  

    </para>

    </listitem>

    </varlistentry>

    </variablelist>

    <para>

        When no option is provided to <function>prepare</function>

        functionality, the <command>centos-art.sh</command> script

        uses the <option>--packages</option>,

        <option>--links</option>, <option>--images</option> and

        <option>--manuals</option> options as default behaviour.

        Otherwise, if you provide any option, the

        <command>centos-art.sh</command> script avoids its default

        behaviour and executes the <function>prepare</function>

        functionality as specified by the options you provides.

    </para>

    <para>

        Notice that it is possible for you to execute the

        <function>prepare</function> functionality as much times as

        you need to.  This is specially useful when you need to keep

        syncronized the relation between content produced inside your

        working copy and the applications you use outside it. For

        example, considering you've added new brushes to or removed

        old brushes from your working copy of &TCAR;, the link

        information related to those files need to be updated in the

        <filename class="directory">~/.gimp-2.2/brushes</filename>

        directory too, in a way the addition/deletion change that took

        place in your working copy can be reflected there, as well.

        The same is true for other similar components like fonts,

        patterns and palettes.

    </para>

    <sect2 id="scripts-bash-prepare-envar">

    <title>Environment Variables</title>

    <para>

        There are some environment variables that you can customize to

        fit your personal needs (e.g., default text editor, default

        locale information, default time zone representation, etc.).

        To customize these variables you need to edit your personal

        profile (i.e., 

        class="directory">~/.bash_profile</filename>) and set the

        redefinition there.  Notice that you may need to logout and

        then do login again in order for the new variable values to

        take effect.

    </para>

    <sect3>

    <title>Default text editor</title>

    <para>

        The default text editor information is controlled by the

        <envar>EDITOR</envar> environment variable. The

        <command>centos-art.sh</command> script uses the default text

        editor to edit subversion pre-commit messages, translation

        files, documentation files, script files, and similar

        text-based files.

    </para>

    <para>

        If <envar>EDITOR</envar> environment variable is not set,

        <command>centos-art.sh</command> script uses 

        class="directory">/usr/bin/vim</filename> as default text

        editor. Otherwise, the following values are recognized by

        <command>centos-art.sh</command> script:

        <itemizedlist>

        <listitem>

        <para>

            <filename class="directory">/usr/bin/vim</filename>

        </para>

        </listitem>

        <listitem>

        <para>

        <filename class="directory">/usr/bin/emacs</filename>

        </para>

        </listitem>

        <listitem>

        <para>

            <filename class="directory">/usr/bin/nano</filename>

        </para>

        </listitem>

        </itemizedlist>

    </para>

    <para>

        If no one of these values is set in the <envar>EDITOR</envar>

        environment variable, the <command>centos-art.sh</command>

        script uses 

        class="directory">/usr/bin/vim</filename> text editor, the one

        installed by default in &TC;;. 

    </para>

    </sect3>

    <sect3>

    <title>Default locale information</title>

    <para>

        The default locale information is controlled by the

        <envar>LANG</envar> environment variable. This variable is

        initially set in the installation process of &TC;;,

        specifically in the <emphasis>Language</emphasis> step.

        Generally, there is no need to customize this variable in your

        personal profile. If you need to change the value of this

        environment variable do it through the login screen of GNOME

        Desktop Environment or the

        <command>system-config-language</command> command.

    </para>

    <para>

        The <command>centos-art.sh</command> script uses the

        <envar>LANG</envar> environment variable to determine what

        language to use for printing output messages from the script

        itself, as well as the portable objects locations that need to

        be updated or edited when you localize directory structures

        inside the working copy of &TCAR;.

    </para>

    </sect3>

    <sect3>

    <title>Default time zone representation</title>

    <para>

        The time zone representation is a time correction applied to

        the system time (stored in the BIOS clock) based on your

        country location.  This correction is specially useful to

        distributed computers around the world that work together and

        need to be syncronized in time to know when things happened.

    </para>

    <para>

        &TCAR; is made of one server and several workstations spread

        around the world. In order for all these workstations to know

        when changes in the server took place, it is required that

        they all set their system clocks to use the same time

        information (e.g., through UTC (Coordinated Universal Time))

        and set the time correction for their specific countries in

        the operating system.  Otherwise, it would be difficult to

        know when something exactly happened.

    </para>

    <para>

        Generally, setting the time information is a straight-forward

        task and configuration tools provided by &TC;; do cover time

        correction for most of the countries around the world.

        However, if you need a time precision not provided by any of

        the date and time configuration tools provided by &TC;; then,

        you need to customize the <envar>TZ</envar> environment

        variable in your personal profile to correct the time

        information by yourself.  The format of <envar>TZ</envar>

        environment variable is described in tzset(3)

        manual page.  

    </para>

    </sect3>

    </sect2>

</sect1>