Blame Manuals/Howto-dialup/Configurations/Dialup/client.docbook

c63c7e
<sect1 id="configurations-dialup-client">
9dcf52
5608ea
    <title>The Client Computer</title>
9dcf52
c63c7e
    <sect2 id="configurations-dialup-client-install">
c63c7e
    <title>Installing Client Computer</title>
c63c7e
    <para>
c63c7e
        ...
c63c7e
    </para>
c63c7e
    </sect2>
c63c7e
c63c7e
    <sect2 id="configurations-dialup-client-config">
c63c7e
    <title>Configuring Client Computer</title>
3d4a62
3d4a62
    <para>
3d4a62
        ...
3d4a62
    </para>
3d4a62
3d4a62
    <sect3 id="configurations-dialup-client-config-conn">
3d4a62
    <title>Establishing Dial-Up Connection</title>
3d4a62
3d4a62
    <para>
3d4a62
        To establish connection from the client computer to the server
3d4a62
        computer you should configure the client computer to dial-up
3d4a62
        the server computer, using the following information:
3d4a62
    </para>
3d4a62
3d4a62
<screen>
3d4a62
 ISP Name: server.example.com
3d4a62
ISP Phone: +53043515094
3d4a62
 Username: client.example.com
3d4a62
 Password: mail4u
3d4a62
</screen>
3d4a62
3d4a62
    <para>
3d4a62
        To estabalish a dial-up connection from the client computer to
3d4a62
        the server computer, you need to determine the modem location
3d4a62
        assigned by the operating system, so you can instruct
3d4a62
        applications like <command>system-config-network</command> the
3d4a62
        correct device they will to talk to. This configuration
3d4a62
        process has been greatly simplified by the
3d4a62
        <command>wvdialconf</command> command distributed with the
3d4a62
        <package>wvdial</package>
3d4a62
        package. To do this, run the following command and pay
3d4a62
        attention to the three last lines of its output:
3d4a62
    </para>
3d4a62
3d4a62
    <screen>wvdialconf /etc/wvdial.conf</screen>
3d4a62
3d4a62
<screen>
3d4a62
Scanning your serial ports for a modem.
3d4a62
3d4a62
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
3d4a62
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
3d4a62
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
3d4a62
Port Scan<*1>: S1   S2   S3   
3d4a62
WvModem<*1>: Cannot get information for serial port.
3d4a62
ttyACM0<*1>: ATQ0 V1 E1 -- OK
3d4a62
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
3d4a62
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
3d4a62
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
3d4a62
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
3d4a62
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
3d4a62
ttyACM0<*1>: Modem Identifier: ATI -- LT V.90 1.0 MT5634ZBA-USB
3d4a62
Data/Fax Modem (Dual Config) Version 5.18e
3d4a62
ttyACM0<*1>: Speed 4800: AT -- OK
3d4a62
ttyACM0<*1>: Speed 9600: AT -- OK
3d4a62
ttyACM0<*1>: Speed 19200: AT -- OK
3d4a62
ttyACM0<*1>: Speed 38400: AT -- OK
3d4a62
ttyACM0<*1>: Speed 57600: AT -- OK
3d4a62
ttyACM0<*1>: Speed 115200: AT -- OK
3d4a62
ttyACM0<*1>: Speed 230400: AT -- OK
3d4a62
ttyACM0<*1>: Speed 460800: AT -- OK
3d4a62
ttyACM0<*1>: Max speed is 460800; that should be safe.
3d4a62
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
3d4a62
3d4a62
Found an USB modem on /dev/ttyACM0.
3d4a62
Modem configuration written to /etc/wvdial.conf.
3d4a62
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
3d4a62
</screen>
3d4a62
9dcf52
    <para>
3d4a62
        Now, using this information, configure a Modem connection
3d4a62
        using the interface provided by
3d4a62
        <command>system-config-network</command> command. Take care of
3d4a62
        replacing the <filename>/dev/modem</filename> device name by
fb9d95
        that one found by <command>wvdialconf</command>. At this
fb9d95
        point, you can use the button Activate from
3d4a62
        <command>system-config-network</command> to establish the
fb9d95
        Modem connection you just configured.
9dcf52
    </para>
3d4a62
 
3d4a62
    </sect3>
c63c7e
    </sect2>
9dcf52
9dcf52
</sect1>
9dcf52